! Started logfile: /scr/pima/bg219h_uvs/J2247+0310_X_dfm.log on Thu May 19 22:45:04 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J2247+0310_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J2247+0310_X_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.784127 visibilities/baseline/integration-bin.
! Found source: J2247+0310
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 11856 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2247+0310_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.055929Jy  sigma=22.169257
! Fit after  self-cal, rms=0.730650Jy  sigma=15.275153
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6886 mas, bmaj=1.664 mas, bpa=-2.261 degrees
! Estimated noise=0.52085 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.199163 Jy
! Component: 100  -  total flux cleaned = 0.253352 Jy
! Total flux subtracted in 100 components = 0.253352 Jy
! Clean residual min=-0.013824 max=0.034888 Jy/beam
! Clean residual mean=-0.000017 rms=0.004028 Jy/beam
! Combined flux in latest and established models = 0.253352 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.253352 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.121689Jy  sigma=2.412971
! Fit after  self-cal, rms=0.121471Jy  sigma=2.409085
! Inverting map 
! Added new window around map position (1, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0385042 Jy
! Component: 100  -  total flux cleaned = 0.0632657 Jy
! Total flux subtracted in 100 components = 0.0632657 Jy
! Clean residual min=-0.010534 max=0.017914 Jy/beam
! Clean residual mean=-0.000011 rms=0.002659 Jy/beam
! Combined flux in latest and established models = 0.316617 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 13 components and 0.316617 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.099302Jy  sigma=1.930673
! Fit after  self-cal, rms=0.098437Jy  sigma=1.908094
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0196855 Jy
! Component: 100  -  total flux cleaned = 0.0330463 Jy
! Total flux subtracted in 100 components = 0.0330463 Jy
! Clean residual min=-0.008432 max=0.011219 Jy/beam
! Clean residual mean=-0.000008 rms=0.002045 Jy/beam
! Combined flux in latest and established models = 0.349664 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 25 components and 0.349664 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090665Jy  sigma=1.738706
! Fit after  self-cal, rms=0.090495Jy  sigma=1.732576
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8418 mas, bmaj=1.934 mas, bpa=-2.912 degrees
! Estimated noise=0.351725 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.2, 0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0226206 Jy
! Component: 100  -  total flux cleaned = 0.0377095 Jy
! Component: 150  -  total flux cleaned = 0.0487413 Jy
! Component: 200  -  total flux cleaned = 0.0571127 Jy
! Total flux subtracted in 200 components = 0.0571127 Jy
! Clean residual min=-0.006772 max=0.008063 Jy/beam
! Clean residual mean=-0.000006 rms=0.001765 Jy/beam
! Combined flux in latest and established models = 0.406776 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 59 components and 0.406776 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083349Jy  sigma=1.569199
! Fit after  self-cal, rms=0.083037Jy  sigma=1.560591
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8418 x 1.934 at -2.912 degrees (North through East)
! Clean map  min=-0.0064234  max=0.27 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.08     KP        0.97     
!   LA        0.97     MK        0.97     NL        1.01     OV        0.99     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.08     KP        0.95     
!   LA        0.99     MK        1.01     NL        1.02     OV        0.99     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.07     KP        0.97     
!   LA        1.01     MK        0.97     NL        1.01     OV        1.00     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.05     KP        0.96     
!   LA        0.97     MK        0.97     NL        1.02     OV        1.01     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.98     HN        1.07     KP        0.97     
!   LA        0.96     MK        1.01     NL        1.00     OV        1.00     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        1.07     KP        0.96     
!   LA        1.01     MK        0.96     NL        1.02     OV        0.99     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.09     KP        0.97     
!   LA        1.02     MK        0.99     NL        1.01     OV        0.97     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.06     KP        0.97     
!   LA        1.00     MK        0.97     NL        1.00     OV        0.99     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.11     KP        0.98     
!   LA        0.97     MK        0.97     NL        0.99     OV        1.01     
!   PT        0.98     SC        0.94     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.99     HN        1.01     KP        0.97     
!   LA        0.98     MK        0.97     NL        1.02     OV        0.99     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.07     KP        0.96     
!   LA        0.94     MK        0.99     NL        0.97     OV        1.00     
!   PT        0.99     SC        1.05     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.09     KP        0.94     
!   LA        0.99     MK        0.95     NL        1.00     OV        1.02     
!   PT        0.97     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.083037Jy  sigma=1.560591
! Fit after  self-cal, rms=0.082530Jy  sigma=1.537497
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8434 mas, bmaj=1.937 mas, bpa=-2.884 degrees
! Estimated noise=0.346055 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5, 2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00807668 Jy
! Component: 100  -  total flux cleaned = 0.0135027 Jy
! Component: 150  -  total flux cleaned = 0.0175821 Jy
! Component: 200  -  total flux cleaned = 0.019835 Jy
! Total flux subtracted in 200 components = 0.019835 Jy
! Clean residual min=-0.005062 max=0.005000 Jy/beam
! Clean residual mean=-0.000002 rms=0.001165 Jy/beam
! Combined flux in latest and established models = 0.426611 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 88 components and 0.426611 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081457Jy  sigma=1.513530
! Fit after  self-cal, rms=0.081436Jy  sigma=1.511866
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081436Jy  sigma=1.511866
! Fit after  self-cal, rms=0.081287Jy  sigma=1.492380
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8442 mas, bmaj=1.933 mas, bpa=-2.918 degrees
! Estimated noise=0.346828 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00444263 Jy
! Component: 100  -  total flux cleaned = 0.00733894 Jy
! Component: 150  -  total flux cleaned = 0.00896222 Jy
! Component: 200  -  total flux cleaned = 0.0100177 Jy
! Total flux subtracted in 200 components = 0.0100177 Jy
! Clean residual min=-0.003472 max=0.003490 Jy/beam
! Clean residual mean=0.000000 rms=0.000752 Jy/beam
! Combined flux in latest and established models = 0.436629 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 111 components and 0.436629 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080997Jy  sigma=1.484605
! Fit after  self-cal, rms=0.080997Jy  sigma=1.483935
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00119714 Jy
! Component: 100  -  total flux cleaned = 0.00214521 Jy
! Component: 150  -  total flux cleaned = 0.00296848 Jy
! Component: 200  -  total flux cleaned = 0.0034848 Jy
! Total flux subtracted in 200 components = 0.0034848 Jy
! Clean residual min=-0.003349 max=0.003164 Jy/beam
! Clean residual mean=0.000001 rms=0.000703 Jy/beam
! Combined flux in latest and established models = 0.440114 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 123 components and 0.440114 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080906Jy  sigma=1.481699
! Fit after  self-cal, rms=0.080897Jy  sigma=1.481478
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080897Jy  sigma=1.481478
! Fit after  self-cal, rms=0.081034Jy  sigma=1.480471
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8443 mas, bmaj=1.932 mas, bpa=-2.95 degrees
! Estimated noise=0.346809 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00176156 Jy
! Component: 100  -  total flux cleaned = 0.00277106 Jy
! Component: 150  -  total flux cleaned = 0.00350926 Jy
! Component: 200  -  total flux cleaned = 0.00406055 Jy
! Total flux subtracted in 200 components = 0.00406055 Jy
! Clean residual min=-0.003165 max=0.002819 Jy/beam
! Clean residual mean=-0.000000 rms=0.000639 Jy/beam
! Combined flux in latest and established models = 0.444174 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 131 components and 0.444174 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080958Jy  sigma=1.478544
! Fit after  self-cal, rms=0.080953Jy  sigma=1.478330
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000301521 Jy
! Component: 100  -  total flux cleaned = 0.000752501 Jy
! Component: 150  -  total flux cleaned = 0.00104318 Jy
! Component: 200  -  total flux cleaned = 0.00117662 Jy
! Total flux subtracted in 200 components = 0.00117662 Jy
! Clean residual min=-0.003075 max=0.002634 Jy/beam
! Clean residual mean=0.000000 rms=0.000620 Jy/beam
! Combined flux in latest and established models = 0.445351 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 141 components and 0.445351 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080916Jy  sigma=1.477491
! Fit after  self-cal, rms=0.080911Jy  sigma=1.477378
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080911Jy  sigma=1.477378
! Fit after  self-cal, rms=0.080993Jy  sigma=1.477070
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.995 mas, bmaj=3.172 mas, bpa=-2.649 degrees
! Estimated noise=0.448787 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00189185 Jy
! Component: 100  -  total flux cleaned = 0.00244799 Jy
! Component: 150  -  total flux cleaned = 0.00259089 Jy
! Component: 200  -  total flux cleaned = 0.00277009 Jy
! Total flux subtracted in 200 components = 0.00277009 Jy
! Clean residual min=-0.002939 max=0.002912 Jy/beam
! Clean residual mean=-0.000000 rms=0.000839 Jy/beam
! Combined flux in latest and established models = 0.448121 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 157 components and 0.448121 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080979Jy  sigma=1.476621
! Fit after  self-cal, rms=0.080975Jy  sigma=1.476523
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000419523 Jy
! Component: 100  -  total flux cleaned = 0.000615281 Jy
! Component: 150  -  total flux cleaned = 0.000712207 Jy
! Component: 200  -  total flux cleaned = 0.000797809 Jy
! Total flux subtracted in 200 components = 0.000797809 Jy
! Clean residual min=-0.002927 max=0.002890 Jy/beam
! Clean residual mean=0.000000 rms=0.000829 Jy/beam
! Combined flux in latest and established models = 0.448919 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 176 components and 0.448919 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080966Jy  sigma=1.476358
! Fit after  self-cal, rms=0.080964Jy  sigma=1.476309
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8442 mas, bmaj=1.932 mas, bpa=-2.987 degrees
! Estimated noise=0.346657 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8442 x 1.932 at -2.987 degrees (North through East)
! Clean map  min=-0.0025866  max=0.26419 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6897 mas, bmaj=1.662 mas, bpa=-2.26 degrees
! Estimated noise=0.514469 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.195733 Jy
! Component: 100  -  total flux cleaned = 0.255198 Jy
! Component: 150  -  total flux cleaned = 0.293408 Jy
! Component: 200  -  total flux cleaned = 0.319211 Jy
! Total flux subtracted in 200 components = 0.319211 Jy
! Clean residual min=-0.008536 max=0.014343 Jy/beam
! Clean residual mean=-0.000009 rms=0.002188 Jy/beam
! Combined flux in latest and established models = 0.319211 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.319211 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8442 mas, bmaj=1.932 mas, bpa=-2.987 degrees
! Estimated noise=0.346657 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0312335 Jy
! Component: 100  -  total flux cleaned = 0.0506956 Jy
! Component: 150  -  total flux cleaned = 0.0645881 Jy
! Component: 200  -  total flux cleaned = 0.0752603 Jy
! Total flux subtracted in 200 components = 0.0752603 Jy
! Clean residual min=-0.005029 max=0.006441 Jy/beam
! Clean residual mean=-0.000006 rms=0.001518 Jy/beam
! Combined flux in latest and established models = 0.394472 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 52 components and 0.394471 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.995 mas, bmaj=3.172 mas, bpa=-2.649 degrees
! Estimated noise=0.448787 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0167261 Jy
! Component: 100  -  total flux cleaned = 0.0274909 Jy
! Component: 150  -  total flux cleaned = 0.0349608 Jy
! Component: 200  -  total flux cleaned = 0.0402889 Jy
! Total flux subtracted in 200 components = 0.0402889 Jy
! Clean residual min=-0.004024 max=0.003632 Jy/beam
! Clean residual mean=-0.000002 rms=0.001115 Jy/beam
! Combined flux in latest and established models = 0.43476 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00386138 Jy
! Component: 100  -  total flux cleaned = 0.00669786 Jy
! Component: 150  -  total flux cleaned = 0.00881245 Jy
! Component: 200  -  total flux cleaned = 0.0104093 Jy
! Total flux subtracted in 200 components = 0.0104093 Jy
! Clean residual min=-0.003226 max=0.002802 Jy/beam
! Clean residual mean=-0.000000 rms=0.000856 Jy/beam
! Combined flux in latest and established models = 0.44517 Jy
! Adding 130 model components to the UV plane model.
! The established model now contains 172 components and 0.44517 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8442 mas, bmaj=1.932 mas, bpa=-2.987 degrees
! Estimated noise=0.346657 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00157599 Jy
! Component: 100  -  total flux cleaned = 0.00179554 Jy
! Component: 150  -  total flux cleaned = 0.00180298 Jy
! Component: 200  -  total flux cleaned = 0.00185854 Jy
! Total flux subtracted in 200 components = 0.00185854 Jy
! Clean residual min=-0.002743 max=0.002549 Jy/beam
! Clean residual mean=-0.000000 rms=0.000614 Jy/beam
! Combined flux in latest and established models = 0.447028 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 190 components and 0.447028 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081047Jy  sigma=1.478521
! Fit after  self-cal, rms=0.081018Jy  sigma=1.477687
wmodel /J2247+0310_X_map.mod
! wmodel: Unable to open new model file: /J2247+0310_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J2247+0310_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8442 x 1.932 at -2.987 degrees (North through East)
! Clean map  min=-0.0024933  max=0.26357 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J2247+0310_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.263571 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000604835 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.688432 0.688432 1.37686 2.75373 5.50746 11.0149 22.0298 44.0597 88.1193
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0018 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.263 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  435.772 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J2247+0310_X_dfm.log closed on Thu May 19 22:45:07 2016