! Started logfile: /scr/pima/bg219h_uvs/J2247+0000_X_dfm.log on Thu May 19 22:44:56 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J2247+0000_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J2247+0000_X_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.696825 visibilities/baseline/integration-bin.
! Found source: J2247+0000
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 10536 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2247+0000_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.104520Jy  sigma=22.297289
! Fit after  self-cal, rms=0.585195Jy  sigma=11.619903
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7228 mas, bmaj=1.709 mas, bpa=-7.055 degrees
! Estimated noise=0.613604 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.31974 Jy
! Component: 100  -  total flux cleaned = 0.409461 Jy
! Total flux subtracted in 100 components = 0.409461 Jy
! Clean residual min=-0.018747 max=0.037521 Jy/beam
! Clean residual mean=0.000021 rms=0.004776 Jy/beam
! Combined flux in latest and established models = 0.409461 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.409461 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.130744Jy  sigma=2.542822
! Fit after  self-cal, rms=0.130369Jy  sigma=2.537607
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0417311 Jy
! Component: 100  -  total flux cleaned = 0.063506 Jy
! Total flux subtracted in 100 components = 0.063506 Jy
! Clean residual min=-0.013013 max=0.023725 Jy/beam
! Clean residual mean=0.000012 rms=0.003172 Jy/beam
! Combined flux in latest and established models = 0.472967 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 15 components and 0.472967 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.111825Jy  sigma=2.131496
! Fit after  self-cal, rms=0.111701Jy  sigma=2.129171
! Inverting map 
! Added new window around map position (-1.4, 1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0220592 Jy
! Component: 100  -  total flux cleaned = 0.0345141 Jy
! Total flux subtracted in 100 components = 0.0345141 Jy
! Clean residual min=-0.013409 max=0.014475 Jy/beam
! Clean residual mean=0.000008 rms=0.002587 Jy/beam
! Combined flux in latest and established models = 0.507481 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 27 components and 0.507481 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.105244Jy  sigma=1.992907
! Fit after  self-cal, rms=0.104799Jy  sigma=1.983116
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8589 mas, bmaj=1.957 mas, bpa=-6.424 degrees
! Estimated noise=0.393579 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0169141 Jy
! Component: 100  -  total flux cleaned = 0.0267847 Jy
! Component: 150  -  total flux cleaned = 0.0337985 Jy
! Component: 200  -  total flux cleaned = 0.0390177 Jy
! Total flux subtracted in 200 components = 0.0390177 Jy
! Clean residual min=-0.009682 max=0.010323 Jy/beam
! Clean residual mean=0.000007 rms=0.002107 Jy/beam
! Combined flux in latest and established models = 0.546499 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 53 components and 0.546499 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.101760Jy  sigma=1.918982
! Fit after  self-cal, rms=0.101501Jy  sigma=1.912953
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8589 x 1.957 at -6.424 degrees (North through East)
! Clean map  min=-0.0082347  max=0.41646 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.06     KP        0.97     
!   LA        1.01     MK        1.01     NL        0.98     OV        1.02     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.96     HN        1.04     KP        0.96     
!   LA        1.00     MK        1.00     NL        1.00     OV        1.02     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.06     KP        0.96     
!   LA        0.99     MK        1.01     NL        0.98     OV        1.03     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        1.05     KP        0.96     
!   LA        1.00     MK        0.98     NL        0.99     OV        1.03     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.98     HN        1.00     KP        0.96     
!   LA        1.01     MK        1.00     NL        1.00     OV        1.02     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.01     KP        0.96     
!   LA        1.04     MK        0.99     NL        0.99     OV        1.02     
!   PT        0.98     SC        1.04     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.03     KP        0.97     
!   LA        1.00     MK        0.99     NL        0.97     OV        1.03     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.00     KP        0.97     
!   LA        1.00     MK        0.98     NL        0.98     OV        1.02     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.02     KP        0.96     
!   LA        0.99     MK        1.00     NL        1.00     OV        1.01     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        1.03     KP        0.95     
!   LA        1.00     MK        1.00     NL        1.00     OV        1.03     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00     HN        1.01     KP        0.95     
!   LA        0.99     MK        1.02     NL        0.99     OV        1.03     
!   PT        1.01     SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        1.04     KP        0.96     
!   LA        1.02     MK        1.02     NL        1.00     OV        1.01     
!   PT        0.98     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.101501Jy  sigma=1.912953
! Fit after  self-cal, rms=0.101326Jy  sigma=1.893377
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8614 mas, bmaj=1.956 mas, bpa=-6.34 degrees
! Estimated noise=0.390763 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.8, 1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00876106 Jy
! Component: 100  -  total flux cleaned = 0.0107056 Jy
! Component: 150  -  total flux cleaned = 0.0110938 Jy
! Component: 200  -  total flux cleaned = 0.0112523 Jy
! Total flux subtracted in 200 components = 0.0112523 Jy
! Clean residual min=-0.008412 max=0.008389 Jy/beam
! Clean residual mean=0.000000 rms=0.001523 Jy/beam
! Combined flux in latest and established models = 0.557751 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 69 components and 0.557751 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.100060Jy  sigma=1.869396
! Fit after  self-cal, rms=0.099973Jy  sigma=1.867316
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.099973Jy  sigma=1.867316
! Fit after  self-cal, rms=0.095881Jy  sigma=1.840125
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8541 mas, bmaj=1.957 mas, bpa=-6.652 degrees
! Estimated noise=0.384852 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000511139 Jy
! Component: 100  -  total flux cleaned = 0.0024256 Jy
! Component: 150  -  total flux cleaned = 0.00423939 Jy
! Component: 200  -  total flux cleaned = 0.00508374 Jy
! Total flux subtracted in 200 components = 0.00508374 Jy
! Clean residual min=-0.006611 max=0.005066 Jy/beam
! Clean residual mean=0.000002 rms=0.001083 Jy/beam
! Combined flux in latest and established models = 0.562835 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 92 components and 0.562835 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.095175Jy  sigma=1.830661
! Fit after  self-cal, rms=0.095130Jy  sigma=1.829814
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00174043 Jy
! Component: 100  -  total flux cleaned = 0.00236864 Jy
! Component: 150  -  total flux cleaned = 0.00292042 Jy
! Component: 200  -  total flux cleaned = 0.0034949 Jy
! Total flux subtracted in 200 components = 0.0034949 Jy
! Clean residual min=-0.006325 max=0.004955 Jy/beam
! Clean residual mean=0.000001 rms=0.001030 Jy/beam
! Combined flux in latest and established models = 0.56633 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 94 components and 0.566329 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.094878Jy  sigma=1.826722
! Fit after  self-cal, rms=0.094859Jy  sigma=1.826352
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.094859Jy  sigma=1.826352
! Fit after  self-cal, rms=0.094600Jy  sigma=1.815108
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8527 mas, bmaj=1.958 mas, bpa=-6.689 degrees
! Estimated noise=0.384135 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000439809 Jy
! Component: 100  -  total flux cleaned = 0.000348628 Jy
! Component: 150  -  total flux cleaned = 0.000828132 Jy
! Component: 200  -  total flux cleaned = 0.00125194 Jy
! Total flux subtracted in 200 components = 0.00125194 Jy
! Clean residual min=-0.004307 max=0.003937 Jy/beam
! Clean residual mean=0.000000 rms=0.000845 Jy/beam
! Combined flux in latest and established models = 0.567581 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 109 components and 0.567581 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.094473Jy  sigma=1.813347
! Fit after  self-cal, rms=0.094476Jy  sigma=1.813113
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000396674 Jy
! Component: 100  -  total flux cleaned = 0.000748211 Jy
! Component: 150  -  total flux cleaned = 0.00100454 Jy
! Component: 200  -  total flux cleaned = 0.00127512 Jy
! Total flux subtracted in 200 components = 0.00127512 Jy
! Clean residual min=-0.004205 max=0.004012 Jy/beam
! Clean residual mean=0.000000 rms=0.000831 Jy/beam
! Combined flux in latest and established models = 0.568856 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 111 components and 0.568856 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.094421Jy  sigma=1.812347
! Fit after  self-cal, rms=0.094412Jy  sigma=1.812214
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.094412Jy  sigma=1.812214
! Fit after  self-cal, rms=0.094103Jy  sigma=1.809780
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.119 mas, bmaj=3.144 mas, bpa=-6.146 degrees
! Estimated noise=0.499468 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00104455 Jy
! Component: 100  -  total flux cleaned = 0.00135952 Jy
! Component: 150  -  total flux cleaned = 0.00142029 Jy
! Component: 200  -  total flux cleaned = 0.00149435 Jy
! Total flux subtracted in 200 components = 0.00149435 Jy
! Clean residual min=-0.003618 max=0.003633 Jy/beam
! Clean residual mean=0.000000 rms=0.000931 Jy/beam
! Combined flux in latest and established models = 0.570351 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 124 components and 0.570351 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.094080Jy  sigma=1.809367
! Fit after  self-cal, rms=0.094078Jy  sigma=1.809289
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000338575 Jy
! Component: 100  -  total flux cleaned = 0.000412356 Jy
! Component: 150  -  total flux cleaned = 0.000392841 Jy
! Component: 200  -  total flux cleaned = 0.000392907 Jy
! Total flux subtracted in 200 components = 0.000392907 Jy
! Clean residual min=-0.003674 max=0.003554 Jy/beam
! Clean residual mean=0.000000 rms=0.000927 Jy/beam
! Combined flux in latest and established models = 0.570744 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 128 components and 0.570744 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.094064Jy  sigma=1.809190
! Fit after  self-cal, rms=0.094063Jy  sigma=1.809152
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8517 mas, bmaj=1.96 mas, bpa=-6.781 degrees
! Estimated noise=0.383335 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8517 x 1.96 at -6.781 degrees (North through East)
! Clean map  min=-0.0039696  max=0.40674 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7171 mas, bmaj=1.716 mas, bpa=-7.401 degrees
! Estimated noise=0.596869 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.310404 Jy
! Component: 100  -  total flux cleaned = 0.401038 Jy
! Component: 150  -  total flux cleaned = 0.445209 Jy
! Component: 200  -  total flux cleaned = 0.470938 Jy
! Total flux subtracted in 200 components = 0.470938 Jy
! Clean residual min=-0.009409 max=0.013888 Jy/beam
! Clean residual mean=0.000009 rms=0.002311 Jy/beam
! Combined flux in latest and established models = 0.470938 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.470938 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8517 mas, bmaj=1.96 mas, bpa=-6.781 degrees
! Estimated noise=0.383335 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0268413 Jy
! Component: 100  -  total flux cleaned = 0.043994 Jy
! Component: 150  -  total flux cleaned = 0.0561045 Jy
! Component: 200  -  total flux cleaned = 0.065061 Jy
! Total flux subtracted in 200 components = 0.065061 Jy
! Clean residual min=-0.004782 max=0.006533 Jy/beam
! Clean residual mean=0.000007 rms=0.001371 Jy/beam
! Combined flux in latest and established models = 0.535999 Jy
! Adding 54 model components to the UV plane model.
! The established model now contains 62 components and 0.535999 Jy
! Inverting map 
! Added new window around map position (-9, 13).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00720156 Jy
! Component: 100  -  total flux cleaned = 0.0127911 Jy
! Component: 150  -  total flux cleaned = 0.0173876 Jy
! Component: 200  -  total flux cleaned = 0.0212759 Jy
! Total flux subtracted in 200 components = 0.0212759 Jy
! Clean residual min=-0.004059 max=0.004471 Jy/beam
! Clean residual mean=0.000003 rms=0.000950 Jy/beam
! Combined flux in latest and established models = 0.557274 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 100 components and 0.557275 Jy
! Inverting map 
! Added new window around map position (11.8, -7.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00425445 Jy
! Component: 100  -  total flux cleaned = 0.00705004 Jy
! Component: 150  -  total flux cleaned = 0.00846648 Jy
! Component: 200  -  total flux cleaned = 0.00937349 Jy
! Total flux subtracted in 200 components = 0.00937349 Jy
! Clean residual min=-0.003594 max=0.003814 Jy/beam
! Clean residual mean=0.000001 rms=0.000823 Jy/beam
! Combined flux in latest and established models = 0.566648 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 120 components and 0.566648 Jy
! Inverting map 
! Added new window around map position (16.4, -26.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00237964 Jy
! Component: 100  -  total flux cleaned = 0.00266676 Jy
! Component: 150  -  total flux cleaned = 0.003208 Jy
! Component: 200  -  total flux cleaned = 0.00346282 Jy
! Total flux subtracted in 200 components = 0.00346282 Jy
! Clean residual min=-0.003280 max=0.003466 Jy/beam
! Clean residual mean=0.000001 rms=0.000754 Jy/beam
! Combined flux in latest and established models = 0.570111 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 142 components and 0.570111 Jy
! Inverting map 
! Added new window around map position (51, 1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00215943 Jy
! Component: 100  -  total flux cleaned = 0.00264241 Jy
! Component: 150  -  total flux cleaned = 0.0028669 Jy
! Component: 200  -  total flux cleaned = 0.00322717 Jy
! Total flux subtracted in 200 components = 0.00322717 Jy
! Clean residual min=-0.003002 max=0.002881 Jy/beam
! Clean residual mean=0.000001 rms=0.000694 Jy/beam
! Combined flux in latest and established models = 0.573338 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 157 components and 0.573338 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.119 mas, bmaj=3.144 mas, bpa=-6.146 degrees
! Estimated noise=0.499468 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00210367 Jy
! Component: 100  -  total flux cleaned = 0.00307451 Jy
! Component: 150  -  total flux cleaned = 0.00359298 Jy
! Component: 200  -  total flux cleaned = 0.0040604 Jy
! Total flux subtracted in 200 components = 0.0040604 Jy
! Clean residual min=-0.003207 max=0.002644 Jy/beam
! Clean residual mean=0.000001 rms=0.000760 Jy/beam
! Combined flux in latest and established models = 0.577398 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000422863 Jy
! Component: 100  -  total flux cleaned = 0.000713295 Jy
! Component: 150  -  total flux cleaned = 0.000936625 Jy
! Component: 200  -  total flux cleaned = 0.00114608 Jy
! Total flux subtracted in 200 components = 0.00114608 Jy
! Clean residual min=-0.003007 max=0.002577 Jy/beam
! Clean residual mean=0.000001 rms=0.000715 Jy/beam
! Combined flux in latest and established models = 0.578545 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 190 components and 0.578544 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8517 mas, bmaj=1.96 mas, bpa=-6.781 degrees
! Estimated noise=0.383335 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000732356 Jy
! Component: 100  -  total flux cleaned = -0.00112282 Jy
! Component: 150  -  total flux cleaned = -0.00124451 Jy
! Component: 200  -  total flux cleaned = -0.00130386 Jy
! Total flux subtracted in 200 components = -0.00130386 Jy
! Clean residual min=-0.002452 max=0.002575 Jy/beam
! Clean residual mean=0.000000 rms=0.000616 Jy/beam
! Combined flux in latest and established models = 0.577241 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 206 components and 0.577241 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.093454Jy  sigma=1.799903
! Fit after  self-cal, rms=0.093425Jy  sigma=1.799118
wmodel /J2247+0000_X_map.mod
! wmodel: Unable to open new model file: /J2247+0000_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J2247+0000_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8517 x 1.96 at -6.781 degrees (North through East)
! Clean map  min=-0.0023795  max=0.4057 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J2247+0000_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.405699 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00060723 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.449025 0.449025 0.898049 1.7961 3.5922 7.18439 14.3688 28.7376 57.4752
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0018 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.405 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  668.114 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J2247+0000_X_dfm.log closed on Thu May 19 22:44:59 2016