! Started logfile: /scr/pima/bg219h_uvs/J2245+0324_S_dfm.log on Thu May 19 22:44:45 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219h_uvs/J2245+0324_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219h_uvs/J2245+0324_S_uva.fits ! AN table 1: 28 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.810317 visibilities/baseline/integration-bin. ! Found source: J2245+0324 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 4084 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2245+0324_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.096493Jy sigma=22.570964 ! Fit after self-cal, rms=0.632553Jy sigma=13.182340 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.739 mas, bmaj=6.568 mas, bpa=-5.42 degrees ! Estimated noise=0.805663 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.288965 Jy ! Component: 100 - total flux cleaned = 0.391085 Jy ! Total flux subtracted in 100 components = 0.391085 Jy ! Clean residual min=-0.025053 max=0.053835 Jy/beam ! Clean residual mean=0.000031 rms=0.007255 Jy/beam ! Combined flux in latest and established models = 0.391085 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.391085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135598Jy sigma=2.726503 ! Fit after self-cal, rms=0.133217Jy sigma=2.670042 ! Inverting map ! Added new window around map position (3, 4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0628036 Jy ! Component: 100 - total flux cleaned = 0.0954135 Jy ! Total flux subtracted in 100 components = 0.0954135 Jy ! Clean residual min=-0.019439 max=0.030520 Jy/beam ! Clean residual mean=0.000008 rms=0.004425 Jy/beam ! Combined flux in latest and established models = 0.486499 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 14 components and 0.486499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094655Jy sigma=1.911274 ! Fit after self-cal, rms=0.092101Jy sigma=1.849108 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0273033 Jy ! Component: 100 - total flux cleaned = 0.0413276 Jy ! Total flux subtracted in 100 components = 0.0413276 Jy ! Clean residual min=-0.014811 max=0.020324 Jy/beam ! Clean residual mean=-0.000001 rms=0.003317 Jy/beam ! Combined flux in latest and established models = 0.527826 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 25 components and 0.527826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082773Jy sigma=1.664203 ! Fit after self-cal, rms=0.081445Jy sigma=1.632724 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.306 mas, bmaj=7.409 mas, bpa=-5.387 degrees ! Estimated noise=0.633915 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.014859 Jy ! Component: 100 - total flux cleaned = 0.0186763 Jy ! Component: 150 - total flux cleaned = 0.0187009 Jy ! Component: 200 - total flux cleaned = 0.0185419 Jy ! Total flux subtracted in 200 components = 0.0185419 Jy ! Clean residual min=-0.012921 max=0.013981 Jy/beam ! Clean residual mean=-0.000001 rms=0.003052 Jy/beam ! Combined flux in latest and established models = 0.546368 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 47 components and 0.546368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078639Jy sigma=1.579918 ! Fit after self-cal, rms=0.078065Jy sigma=1.566143 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.306 x 7.409 at -5.387 degrees (North through East) ! Clean map min=-0.013717 max=0.35239 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 1.00 KP 0.97 ! LA 1.07 MK 0.97 NL 0.95 OV 0.96 ! PT 0.96 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 0.99 KP 0.98 ! LA 1.08 MK 0.97 NL 1.12 OV 0.95 ! PT 0.97 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 1.00 KP 0.98 ! LA 1.07 MK 1.00 NL 1.13 OV 0.97 ! PT 0.97 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 1.04 KP 0.99 ! LA 1.07 MK 0.98 NL 1.01 OV 1.01 ! PT 0.98 SC 0.99 ! ! ! Fit before self-cal, rms=0.078065Jy sigma=1.566143 ! Fit after self-cal, rms=0.076316Jy sigma=1.466252 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.295 mas, bmaj=7.372 mas, bpa=-5.312 degrees ! Estimated noise=0.629967 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00094466 Jy ! Component: 100 - total flux cleaned = 0.000980339 Jy ! Component: 150 - total flux cleaned = 0.000982715 Jy ! Component: 200 - total flux cleaned = 0.000882371 Jy ! Total flux subtracted in 200 components = 0.000882371 Jy ! Clean residual min=-0.013299 max=0.010520 Jy/beam ! Clean residual mean=0.000011 rms=0.002368 Jy/beam ! Combined flux in latest and established models = 0.54725 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 54 components and 0.54725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075264Jy sigma=1.448957 ! Fit after self-cal, rms=0.074984Jy sigma=1.440157 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074984Jy sigma=1.440157 ! Fit after self-cal, rms=0.073087Jy sigma=1.385156 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.289 mas, bmaj=7.36 mas, bpa=-5.22 degrees ! Estimated noise=0.634878 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00305327 Jy ! Component: 100 - total flux cleaned = 0.00348874 Jy ! Component: 150 - total flux cleaned = 0.00406622 Jy ! Component: 200 - total flux cleaned = 0.00406494 Jy ! Total flux subtracted in 200 components = 0.00406494 Jy ! Clean residual min=-0.008794 max=0.007650 Jy/beam ! Clean residual mean=0.000003 rms=0.001765 Jy/beam ! Combined flux in latest and established models = 0.551315 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 64 components and 0.551315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072300Jy sigma=1.372262 ! Fit after self-cal, rms=0.072081Jy sigma=1.365777 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.7437e-05 Jy ! Component: 100 - total flux cleaned = -0.000285741 Jy ! Component: 150 - total flux cleaned = -0.000210414 Jy ! Component: 200 - total flux cleaned = -0.000142385 Jy ! Total flux subtracted in 200 components = -0.000142385 Jy ! Clean residual min=-0.008264 max=0.006827 Jy/beam ! Clean residual mean=0.000003 rms=0.001669 Jy/beam ! Combined flux in latest and established models = 0.551173 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 69 components and 0.551173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071651Jy sigma=1.358582 ! Fit after self-cal, rms=0.071509Jy sigma=1.354388 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071509Jy sigma=1.354388 ! Fit after self-cal, rms=0.070651Jy sigma=1.330593 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.29 mas, bmaj=7.357 mas, bpa=-5.188 degrees ! Estimated noise=0.638523 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168192 Jy ! Component: 100 - total flux cleaned = 0.00217807 Jy ! Component: 150 - total flux cleaned = 0.00275997 Jy ! Component: 200 - total flux cleaned = 0.00290347 Jy ! Total flux subtracted in 200 components = 0.00290347 Jy ! Clean residual min=-0.005779 max=0.005788 Jy/beam ! Clean residual mean=0.000005 rms=0.001302 Jy/beam ! Combined flux in latest and established models = 0.554077 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 70 components and 0.554076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070330Jy sigma=1.325243 ! Fit after self-cal, rms=0.070221Jy sigma=1.322123 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000136869 Jy ! Component: 100 - total flux cleaned = -0.00016773 Jy ! Component: 150 - total flux cleaned = -0.000112819 Jy ! Component: 200 - total flux cleaned = 5.81251e-05 Jy ! Total flux subtracted in 200 components = 5.81251e-05 Jy ! Clean residual min=-0.005440 max=0.005288 Jy/beam ! Clean residual mean=0.000005 rms=0.001243 Jy/beam ! Combined flux in latest and established models = 0.554135 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 74 components and 0.554135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070030Jy sigma=1.318735 ! Fit after self-cal, rms=0.069958Jy sigma=1.316771 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069958Jy sigma=1.316771 ! Fit after self-cal, rms=0.070138Jy sigma=1.316034 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.674 mas, bmaj=11.12 mas, bpa=-7.435 degrees ! Estimated noise=0.838364 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00293855 Jy ! Component: 100 - total flux cleaned = 0.0031018 Jy ! Component: 150 - total flux cleaned = 0.00316848 Jy ! Component: 200 - total flux cleaned = 0.00316733 Jy ! Total flux subtracted in 200 components = 0.00316733 Jy ! Clean residual min=-0.005742 max=0.004944 Jy/beam ! Clean residual mean=0.000008 rms=0.001376 Jy/beam ! Combined flux in latest and established models = 0.557302 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 88 components and 0.557302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070022Jy sigma=1.314636 ! Fit after self-cal, rms=0.070001Jy sigma=1.314067 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000693537 Jy ! Component: 100 - total flux cleaned = 0.000422425 Jy ! Component: 150 - total flux cleaned = 0.000285311 Jy ! Component: 200 - total flux cleaned = 0.000324817 Jy ! Total flux subtracted in 200 components = 0.000324817 Jy ! Clean residual min=-0.005579 max=0.004714 Jy/beam ! Clean residual mean=0.000007 rms=0.001336 Jy/beam ! Combined flux in latest and established models = 0.557627 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 99 components and 0.557627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069974Jy sigma=1.314025 ! Fit after self-cal, rms=0.069961Jy sigma=1.313717 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.29 mas, bmaj=7.354 mas, bpa=-5.157 degrees ! Estimated noise=0.641224 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.29 x 7.354 at -5.157 degrees (North through East) ! Clean map min=-0.0052641 max=0.34815 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.727 mas, bmaj=6.529 mas, bpa=-5.228 degrees ! Estimated noise=0.808777 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.298173 Jy ! Component: 100 - total flux cleaned = 0.419746 Jy ! Component: 150 - total flux cleaned = 0.474303 Jy ! Component: 200 - total flux cleaned = 0.502557 Jy ! Total flux subtracted in 200 components = 0.502557 Jy ! Clean residual min=-0.008406 max=0.014442 Jy/beam ! Clean residual mean=0.000012 rms=0.002353 Jy/beam ! Combined flux in latest and established models = 0.502557 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.502557 Jy ! Inverting map and beam ! Estimated beam: bmin=3.29 mas, bmaj=7.354 mas, bpa=-5.157 degrees ! Estimated noise=0.641224 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0219472 Jy ! Component: 100 - total flux cleaned = 0.0346681 Jy ! Component: 150 - total flux cleaned = 0.0426283 Jy ! Component: 200 - total flux cleaned = 0.0478632 Jy ! Total flux subtracted in 200 components = 0.0478632 Jy ! Clean residual min=-0.005276 max=0.007354 Jy/beam ! Clean residual mean=0.000008 rms=0.001302 Jy/beam ! Combined flux in latest and established models = 0.55042 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 44 components and 0.55042 Jy ! Inverting map ! Added new window around map position (-4.5, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00539903 Jy ! Component: 100 - total flux cleaned = 0.00614867 Jy ! Component: 150 - total flux cleaned = 0.00652116 Jy ! Component: 200 - total flux cleaned = 0.00672682 Jy ! Total flux subtracted in 200 components = 0.00672682 Jy ! Clean residual min=-0.004435 max=0.004482 Jy/beam ! Clean residual mean=0.000003 rms=0.001136 Jy/beam ! Combined flux in latest and established models = 0.557147 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 65 components and 0.557147 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.674 mas, bmaj=11.12 mas, bpa=-7.435 degrees ! Estimated noise=0.838364 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000657076 Jy ! Component: 100 - total flux cleaned = 0.000808449 Jy ! Component: 150 - total flux cleaned = 0.000756124 Jy ! Component: 200 - total flux cleaned = 0.000704063 Jy ! Total flux subtracted in 200 components = 0.000704063 Jy ! Clean residual min=-0.004793 max=0.004428 Jy/beam ! Clean residual mean=0.000005 rms=0.001341 Jy/beam ! Combined flux in latest and established models = 0.557851 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.4289e-05 Jy ! Component: 100 - total flux cleaned = 4.42661e-05 Jy ! Component: 150 - total flux cleaned = 4.45555e-05 Jy ! Component: 200 - total flux cleaned = 4.47024e-05 Jy ! Total flux subtracted in 200 components = 4.47024e-05 Jy ! Clean residual min=-0.004692 max=0.004292 Jy/beam ! Clean residual mean=0.000005 rms=0.001320 Jy/beam ! Combined flux in latest and established models = 0.557896 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 85 components and 0.557896 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.29 mas, bmaj=7.354 mas, bpa=-5.157 degrees ! Estimated noise=0.641224 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000220791 Jy ! Component: 100 - total flux cleaned = -0.000212699 Jy ! Component: 150 - total flux cleaned = -0.000208217 Jy ! Component: 200 - total flux cleaned = -0.000262076 Jy ! Total flux subtracted in 200 components = -0.000262076 Jy ! Clean residual min=-0.004039 max=0.004242 Jy/beam ! Clean residual mean=0.000002 rms=0.001075 Jy/beam ! Combined flux in latest and established models = 0.557634 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 99 components and 0.557634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069283Jy sigma=1.301583 ! Fit after self-cal, rms=0.069196Jy sigma=1.299608 wmodel /J2245+0324_S_map.mod ! wmodel: Unable to open new model file: /J2245+0324_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219h_uvs/J2245+0324_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.29 x 7.354 at -5.157 degrees (North through East) ! Clean map min=-0.0047523 max=0.34642 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J2245+0324_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.346423 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00105932 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.917367 0.917367 1.83473 3.66947 7.33893 14.6779 29.3557 58.7115 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0031 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.346 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 327.023 quit ! Quitting program ! Log file /scr/pima/bg219h_uvs/J2245+0324_S_dfm.log closed on Thu May 19 22:44:48 2016