! Started logfile: /scr/pima/bg219h_uvs/J2223-1607_X_dfm.log on Thu May 19 22:43:30 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J2223-1607_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J2223-1607_X_uva.fits
! AN table 1: 62 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.750896 visibilities/baseline/integration-bin.
! Found source: J2223-1607
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 25140 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2223-1607_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005551Jy  sigma=22.770158
! Fit after  self-cal, rms=0.945759Jy  sigma=21.396086
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6223 mas, bmaj=1.652 mas, bpa=-1.69 degrees
! Estimated noise=0.433246 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0394918 Jy
! Component: 100  -  total flux cleaned = 0.0498829 Jy
! Total flux subtracted in 100 components = 0.0498829 Jy
! Clean residual min=-0.006016 max=0.011106 Jy/beam
! Clean residual mean=0.000005 rms=0.001409 Jy/beam
! Combined flux in latest and established models = 0.0498829 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0498829 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072434Jy  sigma=1.532812
! Fit after  self-cal, rms=0.070836Jy  sigma=1.497811
! Inverting map 
! Added new window around map position (-1.6, 1.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0118211 Jy
! Component: 100  -  total flux cleaned = 0.0183302 Jy
! Total flux subtracted in 100 components = 0.0183302 Jy
! Clean residual min=-0.004547 max=0.006993 Jy/beam
! Clean residual mean=0.000003 rms=0.001105 Jy/beam
! Combined flux in latest and established models = 0.0682131 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 10 components and 0.0682131 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068298Jy  sigma=1.430441
! Fit after  self-cal, rms=0.067644Jy  sigma=1.416524
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00775158 Jy
! Component: 100  -  total flux cleaned = 0.0115654 Jy
! Total flux subtracted in 100 components = 0.0115654 Jy
! Clean residual min=-0.003837 max=0.004452 Jy/beam
! Clean residual mean=0.000002 rms=0.000943 Jy/beam
! Combined flux in latest and established models = 0.0797785 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 15 components and 0.0797785 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066520Jy  sigma=1.386340
! Fit after  self-cal, rms=0.066161Jy  sigma=1.378507
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00550047 Jy
! Component: 100  -  total flux cleaned = 0.00832826 Jy
! Total flux subtracted in 100 components = 0.00832826 Jy
! Clean residual min=-0.004014 max=0.004881 Jy/beam
! Clean residual mean=0.000001 rms=0.000961 Jy/beam
! Combined flux in latest and established models = 0.0881068 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 21 components and 0.0881068 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065646Jy  sigma=1.364731
! Fit after  self-cal, rms=0.065448Jy  sigma=1.360488
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8103 mas, bmaj=2.001 mas, bpa=-2.313 degrees
! Estimated noise=0.212096 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.8, 0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00526493 Jy
! Component: 100  -  total flux cleaned = 0.00726704 Jy
! Component: 150  -  total flux cleaned = 0.00785153 Jy
! Component: 200  -  total flux cleaned = 0.00823234 Jy
! Total flux subtracted in 200 components = 0.00823234 Jy
! Clean residual min=-0.001865 max=0.002720 Jy/beam
! Clean residual mean=-0.000000 rms=0.000476 Jy/beam
! Combined flux in latest and established models = 0.0963392 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 41 components and 0.0963392 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065040Jy  sigma=1.350556
! Fit after  self-cal, rms=0.064948Jy  sigma=1.347548
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8103 x 2.001 at -2.313 degrees (North through East)
! Clean map  min=-0.0017728  max=0.052548 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.03     HN        0.99     KP        0.97     
!   LA        0.93     MK        1.08     NL        1.03     OV        1.06     
!   PT        0.94     SC        1.11     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.12     KP        0.90     
!   LA        0.97     MK        1.01     NL        1.04     OV        1.07     
!   PT        0.97     SC        1.06     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.08     HN        0.99     KP        0.96     
!   LA        0.96     MK        0.99     NL        1.02     OV        1.05     
!   PT        0.96     SC        1.05     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.99     KP        0.99     
!   LA        0.94     MK        1.01     NL        1.03     OV        1.04     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.93     HN        0.92     KP        1.04     
!   LA        1.03     MK        0.97     NL        1.00     OV        0.94     
!   PT        0.98     SC        1.04     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.01     HN        1.14     KP        0.96     
!   LA        0.96     MK        1.04     NL        1.03     OV        1.08     
!   PT        0.95     SC        0.96     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.05     HN        0.99     KP        1.00     
!   LA        0.94     MK        1.10     NL        1.00     OV        1.03     
!   PT        0.92     SC        1.05     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        0.97     KP        0.96     
!   LA        0.98     MK        0.99     NL        1.12     OV        1.05     
!   PT        1.01     SC        0.96     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.05     HN        0.88     KP        0.94     
!   LA        0.94     MK        1.03     NL        1.00     OV        1.06     
!   PT        0.93     SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.08     HN        0.83     KP        0.94     
!   LA        0.95     MK        0.99     NL        1.01     OV        1.08     
!   PT        0.95     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.064948Jy  sigma=1.347548
! Fit after  self-cal, rms=0.064613Jy  sigma=1.344667
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8145 mas, bmaj=2.007 mas, bpa=-2.267 degrees
! Estimated noise=0.212411 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.4, -2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00208552 Jy
! Component: 100  -  total flux cleaned = 0.00269129 Jy
! Component: 150  -  total flux cleaned = 0.00290801 Jy
! Component: 200  -  total flux cleaned = 0.00318354 Jy
! Total flux subtracted in 200 components = 0.00318354 Jy
! Clean residual min=-0.001730 max=0.001782 Jy/beam
! Clean residual mean=-0.000001 rms=0.000375 Jy/beam
! Combined flux in latest and established models = 0.0995227 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 61 components and 0.0995227 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064476Jy  sigma=1.341687
! Fit after  self-cal, rms=0.064421Jy  sigma=1.340525
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064421Jy  sigma=1.340525
! Fit after  self-cal, rms=0.064498Jy  sigma=1.339699
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8167 mas, bmaj=2.003 mas, bpa=-2.056 degrees
! Estimated noise=0.212221 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000504748 Jy
! Component: 100  -  total flux cleaned = 0.000776499 Jy
! Component: 150  -  total flux cleaned = 0.00100176 Jy
! Component: 200  -  total flux cleaned = 0.00109991 Jy
! Total flux subtracted in 200 components = 0.00109991 Jy
! Clean residual min=-0.001477 max=0.001479 Jy/beam
! Clean residual mean=-0.000000 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.100623 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 74 components and 0.100623 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064437Jy  sigma=1.338457
! Fit after  self-cal, rms=0.064440Jy  sigma=1.337887
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-9.6, 10.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000725177 Jy
! Component: 100  -  total flux cleaned = 0.000759666 Jy
! Component: 150  -  total flux cleaned = 0.000855568 Jy
! Component: 200  -  total flux cleaned = 0.000885274 Jy
! Total flux subtracted in 200 components = 0.000885274 Jy
! Clean residual min=-0.001467 max=0.001433 Jy/beam
! Clean residual mean=-0.000000 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.101508 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 90 components and 0.101508 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064390Jy  sigma=1.336910
! Fit after  self-cal, rms=0.064375Jy  sigma=1.336691
! Inverting map 
! Added new window around map position (15.4, 35).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00118006 Jy
! Component: 100  -  total flux cleaned = 0.00140965 Jy
! Component: 150  -  total flux cleaned = 0.00147257 Jy
! Component: 200  -  total flux cleaned = 0.00161291 Jy
! Total flux subtracted in 200 components = 0.00161291 Jy
! Clean residual min=-0.001393 max=0.001281 Jy/beam
! Clean residual mean=0.000000 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.103121 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 103 components and 0.103121 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064328Jy  sigma=1.335684
! Fit after  self-cal, rms=0.064322Jy  sigma=1.335547
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064322Jy  sigma=1.335547
! Fit after  self-cal, rms=0.063858Jy  sigma=1.335165
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8154 mas, bmaj=2 mas, bpa=-1.902 degrees
! Estimated noise=0.211005 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00021464 Jy
! Component: 100  -  total flux cleaned = 0.000448782 Jy
! Component: 150  -  total flux cleaned = 0.000582529 Jy
! Component: 200  -  total flux cleaned = 0.000704199 Jy
! Total flux subtracted in 200 components = 0.000704199 Jy
! Clean residual min=-0.001303 max=0.001236 Jy/beam
! Clean residual mean=0.000000 rms=0.000284 Jy/beam
! Combined flux in latest and established models = 0.103825 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 111 components and 0.103825 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063834Jy  sigma=1.334647
! Fit after  self-cal, rms=0.063833Jy  sigma=1.334554
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.03817e-05 Jy
! Component: 100  -  total flux cleaned = 0.00018814 Jy
! Component: 150  -  total flux cleaned = 0.000256648 Jy
! Component: 200  -  total flux cleaned = 0.000299772 Jy
! Total flux subtracted in 200 components = 0.000299772 Jy
! Clean residual min=-0.001248 max=0.001241 Jy/beam
! Clean residual mean=0.000000 rms=0.000278 Jy/beam
! Combined flux in latest and established models = 0.104125 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 116 components and 0.104125 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063816Jy  sigma=1.334208
! Fit after  self-cal, rms=0.063812Jy  sigma=1.334162
! Inverting map 
! Added new window around map position (31.8, 50.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000889195 Jy
! Component: 100  -  total flux cleaned = 0.00114275 Jy
! Component: 150  -  total flux cleaned = 0.00133614 Jy
! Component: 200  -  total flux cleaned = 0.00153486 Jy
! Total flux subtracted in 200 components = 0.00153486 Jy
! Clean residual min=-0.001181 max=0.001066 Jy/beam
! Clean residual mean=0.000000 rms=0.000266 Jy/beam
! Combined flux in latest and established models = 0.10566 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 125 components and 0.10566 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063783Jy  sigma=1.333509
! Fit after  self-cal, rms=0.063778Jy  sigma=1.333413
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063778Jy  sigma=1.333413
! Fit after  self-cal, rms=0.063592Jy  sigma=1.333153
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.192 mas, bmaj=4.165 mas, bpa=-3.265 degrees
! Estimated noise=0.272779 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000190205 Jy
! Component: 100  -  total flux cleaned = 0.000384972 Jy
! Component: 150  -  total flux cleaned = 0.00047726 Jy
! Component: 200  -  total flux cleaned = 0.000478309 Jy
! Total flux subtracted in 200 components = 0.000478309 Jy
! Clean residual min=-0.001084 max=0.001036 Jy/beam
! Clean residual mean=0.000001 rms=0.000300 Jy/beam
! Combined flux in latest and established models = 0.106138 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 139 components and 0.106138 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063588Jy  sigma=1.333025
! Fit after  self-cal, rms=0.063588Jy  sigma=1.332946
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000130563 Jy
! Component: 100  -  total flux cleaned = 0.000151965 Jy
! Component: 150  -  total flux cleaned = 0.000169716 Jy
! Component: 200  -  total flux cleaned = 0.000153476 Jy
! Total flux subtracted in 200 components = 0.000153476 Jy
! Clean residual min=-0.001004 max=0.001046 Jy/beam
! Clean residual mean=0.000001 rms=0.000286 Jy/beam
! Combined flux in latest and established models = 0.106291 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 142 components and 0.106291 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063587Jy  sigma=1.332947
! Fit after  self-cal, rms=0.063585Jy  sigma=1.332917
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8145 mas, bmaj=1.999 mas, bpa=-1.858 degrees
! Estimated noise=0.210128 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8145 x 1.999 at -1.858 degrees (North through East)
! Clean map  min=-0.0017948  max=0.050175 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6242 mas, bmaj=1.649 mas, bpa=-1.247 degrees
! Estimated noise=0.43172 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0430503 Jy
! Component: 100  -  total flux cleaned = 0.0624835 Jy
! Component: 150  -  total flux cleaned = 0.0736084 Jy
! Component: 200  -  total flux cleaned = 0.080787 Jy
! Total flux subtracted in 200 components = 0.080787 Jy
! Clean residual min=-0.003640 max=0.003871 Jy/beam
! Clean residual mean=0.000002 rms=0.000928 Jy/beam
! Combined flux in latest and established models = 0.080787 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.080787 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8145 mas, bmaj=1.999 mas, bpa=-1.858 degrees
! Estimated noise=0.210128 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00651816 Jy
! Component: 100  -  total flux cleaned = 0.0102681 Jy
! Component: 150  -  total flux cleaned = 0.0129049 Jy
! Component: 200  -  total flux cleaned = 0.014992 Jy
! Total flux subtracted in 200 components = 0.014992 Jy
! Clean residual min=-0.001488 max=0.001790 Jy/beam
! Clean residual mean=0.000001 rms=0.000372 Jy/beam
! Combined flux in latest and established models = 0.0957789 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 50 components and 0.0957789 Jy
! Inverting map 
! Added new window around map position (0.6, -3.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00187964 Jy
! Component: 100  -  total flux cleaned = 0.00337818 Jy
! Component: 150  -  total flux cleaned = 0.00466497 Jy
! Component: 200  -  total flux cleaned = 0.0057416 Jy
! Total flux subtracted in 200 components = 0.0057416 Jy
! Clean residual min=-0.001306 max=0.001140 Jy/beam
! Clean residual mean=0.000001 rms=0.000302 Jy/beam
! Combined flux in latest and established models = 0.101521 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 72 components and 0.101521 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.192 mas, bmaj=4.165 mas, bpa=-3.265 degrees
! Estimated noise=0.272779 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00135689 Jy
! Component: 100  -  total flux cleaned = 0.00216252 Jy
! Component: 150  -  total flux cleaned = 0.00280042 Jy
! Component: 200  -  total flux cleaned = 0.00319734 Jy
! Total flux subtracted in 200 components = 0.00319734 Jy
! Clean residual min=-0.001093 max=0.001121 Jy/beam
! Clean residual mean=0.000001 rms=0.000314 Jy/beam
! Combined flux in latest and established models = 0.104718 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000266804 Jy
! Component: 100  -  total flux cleaned = 0.000482911 Jy
! Component: 150  -  total flux cleaned = 0.000634732 Jy
! Component: 200  -  total flux cleaned = 0.000791654 Jy
! Total flux subtracted in 200 components = 0.000791654 Jy
! Clean residual min=-0.000999 max=0.001064 Jy/beam
! Clean residual mean=0.000001 rms=0.000285 Jy/beam
! Combined flux in latest and established models = 0.10551 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 113 components and 0.10551 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8145 mas, bmaj=1.999 mas, bpa=-1.858 degrees
! Estimated noise=0.210128 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.83369e-05 Jy
! Component: 100  -  total flux cleaned = 0.000151988 Jy
! Component: 150  -  total flux cleaned = 0.000400618 Jy
! Component: 200  -  total flux cleaned = 0.000604412 Jy
! Total flux subtracted in 200 components = 0.000604412 Jy
! Clean residual min=-0.001205 max=0.001083 Jy/beam
! Clean residual mean=0.000001 rms=0.000258 Jy/beam
! Combined flux in latest and established models = 0.106114 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 131 components and 0.106114 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063597Jy  sigma=1.333077
! Fit after  self-cal, rms=0.063604Jy  sigma=1.332809
wmodel /J2223-1607_X_map.mod
! wmodel: Unable to open new model file: /J2223-1607_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J2223-1607_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8145 x 1.999 at -1.858 degrees (North through East)
! Clean map  min=-0.001077  max=0.048427 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J2223-1607_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0484268 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00025421 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.57481 1.57481 3.14962 6.29923 12.5985 25.1969 50.3938
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.048 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  190.499 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J2223-1607_X_dfm.log closed on Thu May 19 22:43:34 2016