! Started logfile: /scr/pima/bg219h_uvs/J2211+1841_X_dfm.log on Thu May 19 22:42:58 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J2211+1841_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J2211+1841_X_uva.fits
! AN table 1: 41 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.927371 visibilities/baseline/integration-bin.
! Found source: J2211+1841
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 20532 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2211+1841_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.036806Jy  sigma=23.058587
! Fit after  self-cal, rms=0.779061Jy  sigma=17.256526
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7303 mas, bmaj=1.553 mas, bpa=-2.083 degrees
! Estimated noise=0.463243 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.170667 Jy
! Component: 100  -  total flux cleaned = 0.211828 Jy
! Total flux subtracted in 100 components = 0.211828 Jy
! Clean residual min=-0.006685 max=0.016177 Jy/beam
! Clean residual mean=-0.000006 rms=0.001633 Jy/beam
! Combined flux in latest and established models = 0.211828 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.211828 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078072Jy  sigma=1.585624
! Fit after  self-cal, rms=0.078039Jy  sigma=1.584921
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0169402 Jy
! Component: 100  -  total flux cleaned = 0.0248005 Jy
! Total flux subtracted in 100 components = 0.0248005 Jy
! Clean residual min=-0.004771 max=0.006417 Jy/beam
! Clean residual mean=-0.000004 rms=0.001092 Jy/beam
! Combined flux in latest and established models = 0.236629 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 9 components and 0.236629 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074285Jy  sigma=1.483570
! Fit after  self-cal, rms=0.074250Jy  sigma=1.482683
! Inverting map 
! Added new window around map position (-5.8, 13).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00515494 Jy
! Component: 100  -  total flux cleaned = 0.00527556 Jy
! Total flux subtracted in 100 components = 0.00527556 Jy
! Clean residual min=-0.004457 max=0.004685 Jy/beam
! Clean residual mean=-0.000005 rms=0.000994 Jy/beam
! Combined flux in latest and established models = 0.241904 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 15 components and 0.241904 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073865Jy  sigma=1.474135
! Fit after  self-cal, rms=0.073850Jy  sigma=1.473547
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9542 mas, bmaj=1.862 mas, bpa=-0.1801 degrees
! Estimated noise=0.23132 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1, 2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00531987 Jy
! Component: 100  -  total flux cleaned = 0.00875444 Jy
! Component: 150  -  total flux cleaned = 0.0112455 Jy
! Component: 200  -  total flux cleaned = 0.012469 Jy
! Total flux subtracted in 200 components = 0.012469 Jy
! Clean residual min=-0.002795 max=0.003850 Jy/beam
! Clean residual mean=-0.000003 rms=0.000749 Jy/beam
! Combined flux in latest and established models = 0.254373 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 28 components and 0.254373 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073365Jy  sigma=1.462753
! Fit after  self-cal, rms=0.073347Jy  sigma=1.462216
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9542 x 1.862 at -0.1801 degrees (North through East)
! Clean map  min=-0.0026044  max=0.22146 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.10     KP        1.00     
!   LA        1.03     MK        1.02     NL        1.00     OV        1.01     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.08     KP        0.99     
!   LA        1.01     MK        1.00     NL        1.00     OV        1.00     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.12     KP        0.98     
!   LA        1.01     MK        1.02     NL        0.99     OV        1.01     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        1.05     KP        0.98     
!   LA        1.00     MK        1.00     NL        1.02     OV        1.00     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.05     KP        0.98     
!   LA        1.00     MK        1.02     NL        0.99     OV        1.01     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.06     KP        0.98     
!   LA        0.99     MK        1.02     NL        1.01     OV        0.99     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.05     KP        0.99     
!   LA        0.98     MK        0.98     NL        0.98     OV        0.98     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.07     KP        0.96     
!   LA        1.02     MK        0.99     NL        0.98     OV        1.00     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.97     KP        0.97     
!   LA        1.00     MK        0.98     NL        1.00     OV        0.98     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.01     KP        0.97     
!   LA        0.98     MK        0.98     NL        0.97     OV        0.99     
!   PT        1.02     SC        0.97     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.02     KP        0.96     
!   LA        0.97     MK        1.00     NL        0.99     OV        1.00     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.03     KP        0.96     
!   LA        1.01     MK        0.95     NL        0.97     OV        0.98     
!   PT        0.97     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.073347Jy  sigma=1.462216
! Fit after  self-cal, rms=0.073529Jy  sigma=1.453898
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9554 mas, bmaj=1.863 mas, bpa=0.06191 degrees
! Estimated noise=0.230414 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00017818 Jy
! Component: 100  -  total flux cleaned = -0.000517969 Jy
! Component: 150  -  total flux cleaned = -0.000563407 Jy
! Component: 200  -  total flux cleaned = -0.00060686 Jy
! Total flux subtracted in 200 components = -0.00060686 Jy
! Clean residual min=-0.003119 max=0.003240 Jy/beam
! Clean residual mean=-0.000002 rms=0.000675 Jy/beam
! Combined flux in latest and established models = 0.253766 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 44 components and 0.253766 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073436Jy  sigma=1.452479
! Fit after  self-cal, rms=0.073449Jy  sigma=1.452387
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073449Jy  sigma=1.452387
! Fit after  self-cal, rms=0.073970Jy  sigma=1.436642
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9585 mas, bmaj=1.854 mas, bpa=0.1019 degrees
! Estimated noise=0.230686 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00106175 Jy
! Component: 100  -  total flux cleaned = 0.00086884 Jy
! Component: 150  -  total flux cleaned = 0.000788185 Jy
! Component: 200  -  total flux cleaned = 0.000718144 Jy
! Total flux subtracted in 200 components = 0.000718144 Jy
! Clean residual min=-0.001580 max=0.001666 Jy/beam
! Clean residual mean=-0.000004 rms=0.000382 Jy/beam
! Combined flux in latest and established models = 0.254484 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 66 components and 0.254484 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073908Jy  sigma=1.435428
! Fit after  self-cal, rms=0.073928Jy  sigma=1.435293
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-20, 4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00124125 Jy
! Component: 100  -  total flux cleaned = 0.00127862 Jy
! Component: 150  -  total flux cleaned = 0.00134146 Jy
! Component: 200  -  total flux cleaned = 0.00136957 Jy
! Total flux subtracted in 200 components = 0.00136957 Jy
! Clean residual min=-0.001539 max=0.001560 Jy/beam
! Clean residual mean=-0.000004 rms=0.000359 Jy/beam
! Combined flux in latest and established models = 0.255854 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 77 components and 0.255854 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073888Jy  sigma=1.434381
! Fit after  self-cal, rms=0.073884Jy  sigma=1.434332
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073884Jy  sigma=1.434332
! Fit after  self-cal, rms=0.073887Jy  sigma=1.434149
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9592 mas, bmaj=1.853 mas, bpa=0.1865 degrees
! Estimated noise=0.230589 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.234e-05 Jy
! Component: 100  -  total flux cleaned = 0.000145212 Jy
! Component: 150  -  total flux cleaned = 0.000144169 Jy
! Component: 200  -  total flux cleaned = 0.000118798 Jy
! Total flux subtracted in 200 components = 0.000118798 Jy
! Clean residual min=-0.001461 max=0.001488 Jy/beam
! Clean residual mean=-0.000004 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.255973 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 82 components and 0.255973 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073862Jy  sigma=1.433671
! Fit after  self-cal, rms=0.073859Jy  sigma=1.433639
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.89926e-05 Jy
! Component: 100  -  total flux cleaned = -2.54985e-05 Jy
! Component: 150  -  total flux cleaned = -4.73331e-05 Jy
! Component: 200  -  total flux cleaned = -6.7854e-05 Jy
! Total flux subtracted in 200 components = -6.7854e-05 Jy
! Clean residual min=-0.001436 max=0.001406 Jy/beam
! Clean residual mean=-0.000004 rms=0.000338 Jy/beam
! Combined flux in latest and established models = 0.255905 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 85 components and 0.255905 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073845Jy  sigma=1.433339
! Fit after  self-cal, rms=0.073842Jy  sigma=1.433324
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073842Jy  sigma=1.433324
! Fit after  self-cal, rms=0.073889Jy  sigma=1.433265
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.083 mas, bmaj=2.841 mas, bpa=-4.094 degrees
! Estimated noise=0.283813 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000268079 Jy
! Component: 100  -  total flux cleaned = -0.000391694 Jy
! Component: 150  -  total flux cleaned = -0.000529366 Jy
! Component: 200  -  total flux cleaned = -0.000574451 Jy
! Total flux subtracted in 200 components = -0.000574451 Jy
! Clean residual min=-0.001493 max=0.001553 Jy/beam
! Clean residual mean=-0.000008 rms=0.000381 Jy/beam
! Combined flux in latest and established models = 0.255331 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 94 components and 0.255331 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073884Jy  sigma=1.433121
! Fit after  self-cal, rms=0.073880Jy  sigma=1.433093
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.17148e-05 Jy
! Component: 100  -  total flux cleaned = -6.04194e-06 Jy
! Component: 150  -  total flux cleaned = -4.36925e-05 Jy
! Component: 200  -  total flux cleaned = -9.22628e-05 Jy
! Total flux subtracted in 200 components = -9.22628e-05 Jy
! Clean residual min=-0.001410 max=0.001533 Jy/beam
! Clean residual mean=-0.000008 rms=0.000375 Jy/beam
! Combined flux in latest and established models = 0.255238 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 100 components and 0.255238 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073879Jy  sigma=1.433027
! Fit after  self-cal, rms=0.073876Jy  sigma=1.433016
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9597 mas, bmaj=1.852 mas, bpa=0.2504 degrees
! Estimated noise=0.230519 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9597 x 1.852 at 0.2504 degrees (North through East)
! Clean map  min=-0.0012862  max=0.22097 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7334 mas, bmaj=1.539 mas, bpa=-1.722 degrees
! Estimated noise=0.462422 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.170225 Jy
! Component: 100  -  total flux cleaned = 0.211576 Jy
! Component: 150  -  total flux cleaned = 0.228274 Jy
! Component: 200  -  total flux cleaned = 0.235749 Jy
! Total flux subtracted in 200 components = 0.235749 Jy
! Clean residual min=-0.003453 max=0.003774 Jy/beam
! Clean residual mean=-0.000005 rms=0.000841 Jy/beam
! Combined flux in latest and established models = 0.235749 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.235749 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9597 mas, bmaj=1.852 mas, bpa=0.2504 degrees
! Estimated noise=0.230519 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00613666 Jy
! Component: 100  -  total flux cleaned = 0.00968409 Jy
! Component: 150  -  total flux cleaned = 0.0121733 Jy
! Component: 200  -  total flux cleaned = 0.0140493 Jy
! Total flux subtracted in 200 components = 0.0140493 Jy
! Clean residual min=-0.001657 max=0.001677 Jy/beam
! Clean residual mean=-0.000005 rms=0.000369 Jy/beam
! Combined flux in latest and established models = 0.249798 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 33 components and 0.249798 Jy
! Inverting map 
! Added new window around map position (-3.8, 9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00166825 Jy
! Component: 100  -  total flux cleaned = 0.002781 Jy
! Component: 150  -  total flux cleaned = 0.00347277 Jy
! Component: 200  -  total flux cleaned = 0.00416116 Jy
! Total flux subtracted in 200 components = 0.00416116 Jy
! Clean residual min=-0.001452 max=0.001347 Jy/beam
! Clean residual mean=-0.000004 rms=0.000329 Jy/beam
! Combined flux in latest and established models = 0.253959 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 48 components and 0.253959 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.083 mas, bmaj=2.841 mas, bpa=-4.094 degrees
! Estimated noise=0.283813 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00108294 Jy
! Component: 100  -  total flux cleaned = 0.00166268 Jy
! Component: 150  -  total flux cleaned = 0.00196428 Jy
! Component: 200  -  total flux cleaned = 0.0021609 Jy
! Total flux subtracted in 200 components = 0.0021609 Jy
! Clean residual min=-0.001377 max=0.001361 Jy/beam
! Clean residual mean=-0.000008 rms=0.000355 Jy/beam
! Combined flux in latest and established models = 0.25612 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000195485 Jy
! Component: 100  -  total flux cleaned = 0.000388142 Jy
! Component: 150  -  total flux cleaned = 0.000547671 Jy
! Component: 200  -  total flux cleaned = 0.000664835 Jy
! Total flux subtracted in 200 components = 0.000664835 Jy
! Clean residual min=-0.001331 max=0.001307 Jy/beam
! Clean residual mean=-0.000007 rms=0.000347 Jy/beam
! Combined flux in latest and established models = 0.256785 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 89 components and 0.256785 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9597 mas, bmaj=1.852 mas, bpa=0.2504 degrees
! Estimated noise=0.230519 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.94443e-05 Jy
! Component: 100  -  total flux cleaned = 0.00018849 Jy
! Component: 150  -  total flux cleaned = 0.000306905 Jy
! Component: 200  -  total flux cleaned = 0.000395466 Jy
! Total flux subtracted in 200 components = 0.000395466 Jy
! Clean residual min=-0.001280 max=0.001217 Jy/beam
! Clean residual mean=-0.000003 rms=0.000306 Jy/beam
! Combined flux in latest and established models = 0.25718 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 105 components and 0.25718 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073844Jy  sigma=1.432249
! Fit after  self-cal, rms=0.073829Jy  sigma=1.432100
wmodel /J2211+1841_X_map.mod
! wmodel: Unable to open new model file: /J2211+1841_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J2211+1841_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9597 x 1.852 at 0.2504 degrees (North through East)
! Clean map  min=-0.0011951  max=0.22129 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J2211+1841_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.221293 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000304926 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.413379 0.413379 0.826759 1.65352 3.30703 6.61407 13.2281 26.4563 52.9125
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.221 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  725.725 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J2211+1841_X_dfm.log closed on Thu May 19 22:43:01 2016