! Started logfile: /scr/pima/bg219h_uvs/J2203+1007_X_dfm.log on Thu May 19 22:42:32 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J2203+1007_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J2203+1007_X_uva.fits
! AN table 1: 58 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.933333 visibilities/baseline/integration-bin.
! Found source: J2203+1007
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 29232 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2203+1007_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.015224Jy  sigma=22.550946
! Fit after  self-cal, rms=0.897463Jy  sigma=19.760125
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.728 mas, bmaj=1.682 mas, bpa=-4.374 degrees
! Estimated noise=0.399652 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0745618 Jy
! Component: 100  -  total flux cleaned = 0.106821 Jy
! Total flux subtracted in 100 components = 0.106821 Jy
! Clean residual min=-0.008934 max=0.021024 Jy/beam
! Clean residual mean=-0.000026 rms=0.002650 Jy/beam
! Combined flux in latest and established models = 0.106821 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.106821 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090593Jy  sigma=1.910683
! Fit after  self-cal, rms=0.089656Jy  sigma=1.896987
! Inverting map 
! Added new window around map position (-10, 3.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0230921 Jy
! Component: 100  -  total flux cleaned = 0.038564 Jy
! Total flux subtracted in 100 components = 0.038564 Jy
! Clean residual min=-0.006804 max=0.017196 Jy/beam
! Clean residual mean=-0.000019 rms=0.001904 Jy/beam
! Combined flux in latest and established models = 0.145385 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 25 components and 0.145385 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080913Jy  sigma=1.664628
! Fit after  self-cal, rms=0.080323Jy  sigma=1.654254
! Inverting map 
! Added new window around map position (-1, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0171261 Jy
! Component: 100  -  total flux cleaned = 0.0282525 Jy
! Total flux subtracted in 100 components = 0.0282525 Jy
! Clean residual min=-0.005347 max=0.010747 Jy/beam
! Clean residual mean=-0.000014 rms=0.001354 Jy/beam
! Combined flux in latest and established models = 0.173637 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 34 components and 0.173637 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075328Jy  sigma=1.522505
! Fit after  self-cal, rms=0.074922Jy  sigma=1.513651
! Inverting map 
! Added new window around map position (-9, 3.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0113136 Jy
! Component: 100  -  total flux cleaned = 0.0189126 Jy
! Total flux subtracted in 100 components = 0.0189126 Jy
! Clean residual min=-0.004648 max=0.004809 Jy/beam
! Clean residual mean=-0.000011 rms=0.001013 Jy/beam
! Combined flux in latest and established models = 0.19255 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 36 components and 0.19255 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072669Jy  sigma=1.451650
! Fit after  self-cal, rms=0.072549Jy  sigma=1.448607
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9084 mas, bmaj=2.004 mas, bpa=-3.694 degrees
! Estimated noise=0.195252 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2, 0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00991869 Jy
! Component: 100  -  total flux cleaned = 0.0169284 Jy
! Component: 150  -  total flux cleaned = 0.0222129 Jy
! Component: 200  -  total flux cleaned = 0.0262552 Jy
! Total flux subtracted in 200 components = 0.0262552 Jy
! Clean residual min=-0.002382 max=0.002689 Jy/beam
! Clean residual mean=-0.000009 rms=0.000692 Jy/beam
! Combined flux in latest and established models = 0.218805 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 56 components and 0.218805 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070885Jy  sigma=1.402331
! Fit after  self-cal, rms=0.070811Jy  sigma=1.399718
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9084 x 2.004 at -3.694 degrees (North through East)
! Clean map  min=-0.0023004  max=0.10102 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.92     HN        1.01     KP        1.00     
!   LA        0.97     MK        1.03     NL        1.00     OV        0.97     
!   PT        0.95     SC        1.07     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.94     HN        0.99     KP        0.97     
!   LA        0.97     MK        1.04     NL        1.01     OV        0.96     
!   PT        0.96     SC        1.06     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.96     HN        0.97     KP        0.98     
!   LA        0.96     MK        0.99     NL        1.00     OV        0.97     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.01     KP        0.98     
!   LA        0.97     MK        1.07     NL        0.99     OV        0.97     
!   PT        0.99     SC        1.06     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        0.97     KP        0.97     
!   LA        1.01     MK        1.10     NL        1.00     OV        0.98     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        0.99     KP        0.99     
!   LA        0.98     MK        1.05     NL        1.02     OV        0.98     
!   PT        1.00     SC        1.04     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        0.99     KP        0.98     
!   LA        0.98     MK        1.04     NL        1.01     OV        1.00     
!   PT        0.97     SC        1.05     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        0.95     KP        0.97     
!   LA        0.99     MK        1.05     NL        1.01     OV        0.99     
!   PT        0.98     SC        1.09     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        0.90     KP        0.99     
!   LA        0.97     MK        1.03     NL        0.99     OV        1.01     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.96     HN        0.96     KP        1.00     
!   LA        0.97     MK        0.98     NL        1.03     OV        0.96     
!   PT        1.01     SC        0.93     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.96     HN        0.97     KP        0.99     
!   LA        0.95     MK        1.03     NL        1.05     OV        0.99     
!   PT        0.97     SC        1.11     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.97     HN        1.00     KP        0.99     
!   LA        0.97     MK        1.12     NL        1.02     OV        0.97     
!   PT        1.02     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.070811Jy  sigma=1.399718
! Fit after  self-cal, rms=0.069697Jy  sigma=1.393221
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9234 mas, bmaj=2.024 mas, bpa=-3.698 degrees
! Estimated noise=0.192361 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00211157 Jy
! Component: 100  -  total flux cleaned = 0.00340736 Jy
! Component: 150  -  total flux cleaned = 0.00450661 Jy
! Component: 200  -  total flux cleaned = 0.00523878 Jy
! Total flux subtracted in 200 components = 0.00523878 Jy
! Clean residual min=-0.001854 max=0.002068 Jy/beam
! Clean residual mean=0.000000 rms=0.000490 Jy/beam
! Combined flux in latest and established models = 0.224044 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 76 components and 0.224044 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069533Jy  sigma=1.388803
! Fit after  self-cal, rms=0.069526Jy  sigma=1.388439
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069526Jy  sigma=1.388439
! Fit after  self-cal, rms=0.070231Jy  sigma=1.383786
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.921 mas, bmaj=2.01 mas, bpa=-3.67 degrees
! Estimated noise=0.192574 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.001602 Jy
! Component: 100  -  total flux cleaned = 0.00233493 Jy
! Component: 150  -  total flux cleaned = 0.00285341 Jy
! Component: 200  -  total flux cleaned = 0.00319322 Jy
! Total flux subtracted in 200 components = 0.00319322 Jy
! Clean residual min=-0.001412 max=0.001505 Jy/beam
! Clean residual mean=-0.000001 rms=0.000334 Jy/beam
! Combined flux in latest and established models = 0.227237 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 89 components and 0.227237 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070172Jy  sigma=1.382361
! Fit after  self-cal, rms=0.070199Jy  sigma=1.382215
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2, 5.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0012705 Jy
! Component: 100  -  total flux cleaned = 0.00161709 Jy
! Component: 150  -  total flux cleaned = 0.00192844 Jy
! Component: 200  -  total flux cleaned = 0.00223827 Jy
! Total flux subtracted in 200 components = 0.00223827 Jy
! Clean residual min=-0.001388 max=0.001366 Jy/beam
! Clean residual mean=-0.000000 rms=0.000313 Jy/beam
! Combined flux in latest and established models = 0.229475 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 99 components and 0.229475 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070162Jy  sigma=1.381388
! Fit after  self-cal, rms=0.070160Jy  sigma=1.381343
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070160Jy  sigma=1.381343
! Fit after  self-cal, rms=0.070156Jy  sigma=1.380480
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9182 mas, bmaj=2.003 mas, bpa=-3.53 degrees
! Estimated noise=0.191605 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000244944 Jy
! Component: 100  -  total flux cleaned = 0.000552518 Jy
! Component: 150  -  total flux cleaned = 0.000751286 Jy
! Component: 200  -  total flux cleaned = 0.000910696 Jy
! Total flux subtracted in 200 components = 0.000910696 Jy
! Clean residual min=-0.001238 max=0.001194 Jy/beam
! Clean residual mean=0.000001 rms=0.000285 Jy/beam
! Combined flux in latest and established models = 0.230386 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 107 components and 0.230386 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070137Jy  sigma=1.380037
! Fit after  self-cal, rms=0.070155Jy  sigma=1.379958
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00016364 Jy
! Component: 100  -  total flux cleaned = 0.000335842 Jy
! Component: 150  -  total flux cleaned = 0.000454863 Jy
! Component: 200  -  total flux cleaned = 0.0005657 Jy
! Total flux subtracted in 200 components = 0.0005657 Jy
! Clean residual min=-0.001229 max=0.001148 Jy/beam
! Clean residual mean=0.000001 rms=0.000281 Jy/beam
! Combined flux in latest and established models = 0.230952 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 111 components and 0.230952 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070144Jy  sigma=1.379709
! Fit after  self-cal, rms=0.070145Jy  sigma=1.379694
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070145Jy  sigma=1.379694
! Fit after  self-cal, rms=0.070004Jy  sigma=1.379328
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.078 mas, bmaj=3.084 mas, bpa=-7.905 degrees
! Estimated noise=0.236339 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000809791 Jy
! Component: 100  -  total flux cleaned = 0.00100955 Jy
! Component: 150  -  total flux cleaned = 0.00113473 Jy
! Component: 200  -  total flux cleaned = 0.00120114 Jy
! Total flux subtracted in 200 components = 0.00120114 Jy
! Clean residual min=-0.001075 max=0.001001 Jy/beam
! Clean residual mean=0.000002 rms=0.000298 Jy/beam
! Combined flux in latest and established models = 0.232153 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 129 components and 0.232153 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070002Jy  sigma=1.379233
! Fit after  self-cal, rms=0.070001Jy  sigma=1.379201
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000164373 Jy
! Component: 100  -  total flux cleaned = 0.000200432 Jy
! Component: 150  -  total flux cleaned = 0.000244879 Jy
! Component: 200  -  total flux cleaned = 0.000276624 Jy
! Total flux subtracted in 200 components = 0.000276624 Jy
! Clean residual min=-0.001064 max=0.000990 Jy/beam
! Clean residual mean=0.000002 rms=0.000293 Jy/beam
! Combined flux in latest and established models = 0.232429 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 133 components and 0.232429 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070001Jy  sigma=1.379194
! Fit after  self-cal, rms=0.070000Jy  sigma=1.379187
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9161 mas, bmaj=2.001 mas, bpa=-3.614 degrees
! Estimated noise=0.191298 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9161 x 2.001 at -3.614 degrees (North through East)
! Clean map  min=-0.0010714  max=0.097781 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7336 mas, bmaj=1.672 mas, bpa=-4.099 degrees
! Estimated noise=0.393776 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0741303 Jy
! Component: 100  -  total flux cleaned = 0.110551 Jy
! Component: 150  -  total flux cleaned = 0.134714 Jy
! Component: 200  -  total flux cleaned = 0.152269 Jy
! Total flux subtracted in 200 components = 0.152269 Jy
! Clean residual min=-0.005465 max=0.010008 Jy/beam
! Clean residual mean=-0.000016 rms=0.001565 Jy/beam
! Combined flux in latest and established models = 0.152269 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.152269 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9161 mas, bmaj=2.001 mas, bpa=-3.614 degrees
! Estimated noise=0.191298 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0194752 Jy
! Component: 100  -  total flux cleaned = 0.0327711 Jy
! Component: 150  -  total flux cleaned = 0.0425357 Jy
! Component: 200  -  total flux cleaned = 0.0499985 Jy
! Total flux subtracted in 200 components = 0.0499985 Jy
! Clean residual min=-0.002825 max=0.004339 Jy/beam
! Clean residual mean=-0.000012 rms=0.000808 Jy/beam
! Combined flux in latest and established models = 0.202268 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 52 components and 0.202268 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00576557 Jy
! Component: 100  -  total flux cleaned = 0.0102592 Jy
! Component: 150  -  total flux cleaned = 0.0138052 Jy
! Component: 200  -  total flux cleaned = 0.0166425 Jy
! Total flux subtracted in 200 components = 0.0166425 Jy
! Clean residual min=-0.001748 max=0.001781 Jy/beam
! Clean residual mean=-0.000004 rms=0.000429 Jy/beam
! Combined flux in latest and established models = 0.21891 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 79 components and 0.21891 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.078 mas, bmaj=3.084 mas, bpa=-7.905 degrees
! Estimated noise=0.236339 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00384425 Jy
! Component: 100  -  total flux cleaned = 0.00636744 Jy
! Component: 150  -  total flux cleaned = 0.00816189 Jy
! Component: 200  -  total flux cleaned = 0.00952196 Jy
! Total flux subtracted in 200 components = 0.00952196 Jy
! Clean residual min=-0.001274 max=0.001264 Jy/beam
! Clean residual mean=-0.000001 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.228432 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00105479 Jy
! Component: 100  -  total flux cleaned = 0.00173552 Jy
! Component: 150  -  total flux cleaned = 0.00216395 Jy
! Component: 200  -  total flux cleaned = 0.00243738 Jy
! Total flux subtracted in 200 components = 0.00243738 Jy
! Clean residual min=-0.001111 max=0.001087 Jy/beam
! Clean residual mean=0.000001 rms=0.000308 Jy/beam
! Combined flux in latest and established models = 0.230869 Jy
! Adding 64 model components to the UV plane model.
! The established model now contains 132 components and 0.230869 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9161 mas, bmaj=2.001 mas, bpa=-3.614 degrees
! Estimated noise=0.191298 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000283211 Jy
! Component: 100  -  total flux cleaned = -2.24087e-05 Jy
! Component: 150  -  total flux cleaned = 0.000172972 Jy
! Component: 200  -  total flux cleaned = 0.000349696 Jy
! Total flux subtracted in 200 components = 0.000349696 Jy
! Clean residual min=-0.001137 max=0.001143 Jy/beam
! Clean residual mean=0.000001 rms=0.000275 Jy/beam
! Combined flux in latest and established models = 0.231219 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 148 components and 0.231219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070003Jy  sigma=1.379417
! Fit after  self-cal, rms=0.069994Jy  sigma=1.378995
wmodel /J2203+1007_X_map.mod
! wmodel: Unable to open new model file: /J2203+1007_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J2203+1007_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9161 x 2.001 at -3.614 degrees (North through East)
! Clean map  min=-0.0010257  max=0.096778 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J2203+1007_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0967783 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000269302 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.8348 0.8348 1.6696 3.3392 6.6784 13.3568 26.7136 53.4272
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.096 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  359.367 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J2203+1007_X_dfm.log closed on Thu May 19 22:42:36 2016