! Started logfile: /scr/pima/bg219h_uvs/J2203+1007_S_dfm.log on Thu May 19 22:42:28 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219h_uvs/J2203+1007_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J2203+1007_S_uva.fits
! AN table 1: 58 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.778927 visibilities/baseline/integration-bin.
! Found source: J2203+1007
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 8132 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2203+1007_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 77 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 77 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 77 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 77 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.015261Jy  sigma=22.846362
! Fit after  self-cal, rms=0.889800Jy  sigma=20.014890
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.711 mas, bmaj=6.494 mas, bpa=-4.215 degrees
! Estimated noise=0.593609 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0837078 Jy
! Component: 100  -  total flux cleaned = 0.113954 Jy
! Total flux subtracted in 100 components = 0.113954 Jy
! Clean residual min=-0.014306 max=0.048004 Jy/beam
! Clean residual mean=0.000005 rms=0.004572 Jy/beam
! Combined flux in latest and established models = 0.113954 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.113954 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.116880Jy  sigma=2.587024
! Fit after  self-cal, rms=0.113977Jy  sigma=2.528892
! Inverting map 
! Added new window around map position (-9, 3.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0481773 Jy
! Component: 100  -  total flux cleaned = 0.0676199 Jy
! Total flux subtracted in 100 components = 0.0676199 Jy
! Clean residual min=-0.011208 max=0.022683 Jy/beam
! Clean residual mean=0.000003 rms=0.002886 Jy/beam
! Combined flux in latest and established models = 0.181574 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 24 components and 0.181574 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090922Jy  sigma=1.998691
! Fit after  self-cal, rms=0.078804Jy  sigma=1.720834
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0287843 Jy
! Component: 100  -  total flux cleaned = 0.0424867 Jy
! Total flux subtracted in 100 components = 0.0424867 Jy
! Clean residual min=-0.006808 max=0.011870 Jy/beam
! Clean residual mean=0.000005 rms=0.001761 Jy/beam
! Combined flux in latest and established models = 0.22406 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 28 components and 0.22406 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067397Jy  sigma=1.452556
! Fit after  self-cal, rms=0.066511Jy  sigma=1.433350
! Inverting map 
! Added new window around map position (-3, 0.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.013337 Jy
! Component: 100  -  total flux cleaned = 0.0215498 Jy
! Total flux subtracted in 100 components = 0.0215498 Jy
! Clean residual min=-0.005143 max=0.005385 Jy/beam
! Clean residual mean=0.000006 rms=0.001220 Jy/beam
! Combined flux in latest and established models = 0.24561 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 33 components and 0.24561 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063650Jy  sigma=1.366717
! Fit after  self-cal, rms=0.063539Jy  sigma=1.364168
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.233 mas, bmaj=7.275 mas, bpa=-6.021 degrees
! Estimated noise=0.372515 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00661972 Jy
! Component: 100  -  total flux cleaned = 0.0103547 Jy
! Component: 150  -  total flux cleaned = 0.0121407 Jy
! Component: 200  -  total flux cleaned = 0.0130399 Jy
! Total flux subtracted in 200 components = 0.0130399 Jy
! Clean residual min=-0.003284 max=0.003267 Jy/beam
! Clean residual mean=0.000008 rms=0.000760 Jy/beam
! Combined flux in latest and established models = 0.25865 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 55 components and 0.25865 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062783Jy  sigma=1.347288
! Fit after  self-cal, rms=0.062749Jy  sigma=1.346392
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.233 x 7.275 at -6.021 degrees (North through East)
! Clean map  min=-0.0032799  max=0.11166 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00*    HN        1.01     KP        1.00     
!   LA        1.07     MK        1.02     NL        1.04     OV        0.97     
!   PT        0.99     SC        1.06     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00*    HN        1.02     KP        0.98     
!   LA        1.04     MK        1.04     NL        1.07     OV        0.98     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.00*    HN        1.03     KP        0.97     
!   LA        1.06     MK        0.98     NL        1.01     OV        0.98     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00*    HN        1.01     KP        0.96     
!   LA        1.03     MK        0.97     NL        0.97     OV        0.98     
!   PT        0.94     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.062749Jy  sigma=1.346392
! Fit after  self-cal, rms=0.062795Jy  sigma=1.335881
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.239 mas, bmaj=7.27 mas, bpa=-5.97 degrees
! Estimated noise=0.371358 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000288644 Jy
! Component: 100  -  total flux cleaned = 0.000751731 Jy
! Component: 150  -  total flux cleaned = 0.000882386 Jy
! Component: 200  -  total flux cleaned = 0.000958653 Jy
! Total flux subtracted in 200 components = 0.000958653 Jy
! Clean residual min=-0.002287 max=0.002332 Jy/beam
! Clean residual mean=0.000005 rms=0.000559 Jy/beam
! Combined flux in latest and established models = 0.259609 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 65 components and 0.259609 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062708Jy  sigma=1.334351
! Fit after  self-cal, rms=0.062735Jy  sigma=1.334169
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062735Jy  sigma=1.334169
! Fit after  self-cal, rms=0.062202Jy  sigma=1.328770
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.24 mas, bmaj=7.268 mas, bpa=-6.097 degrees
! Estimated noise=0.369105 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.44096e-05 Jy
! Component: 100  -  total flux cleaned = 0.000184918 Jy
! Component: 150  -  total flux cleaned = 0.000298778 Jy
! Component: 200  -  total flux cleaned = 0.000349785 Jy
! Total flux subtracted in 200 components = 0.000349785 Jy
! Clean residual min=-0.001781 max=0.002032 Jy/beam
! Clean residual mean=0.000000 rms=0.000455 Jy/beam
! Combined flux in latest and established models = 0.259958 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 78 components and 0.259958 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062165Jy  sigma=1.328113
! Fit after  self-cal, rms=0.062167Jy  sigma=1.328014
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-116, -38).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00162528 Jy
! Component: 100  -  total flux cleaned = 0.00175323 Jy
! Component: 150  -  total flux cleaned = 0.00171817 Jy
! Component: 200  -  total flux cleaned = 0.00165391 Jy
! Total flux subtracted in 200 components = 0.00165391 Jy
! Clean residual min=-0.001764 max=0.001783 Jy/beam
! Clean residual mean=0.000000 rms=0.000435 Jy/beam
! Combined flux in latest and established models = 0.261612 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 92 components and 0.261612 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062101Jy  sigma=1.326619
! Fit after  self-cal, rms=0.062099Jy  sigma=1.326501
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062099Jy  sigma=1.326501
! Fit after  self-cal, rms=0.062026Jy  sigma=1.326400
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.236 mas, bmaj=7.26 mas, bpa=-6.091 degrees
! Estimated noise=0.368703 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000859358 Jy
! Component: 100  -  total flux cleaned = 0.000860351 Jy
! Component: 150  -  total flux cleaned = 0.000833588 Jy
! Component: 200  -  total flux cleaned = 0.000807524 Jy
! Total flux subtracted in 200 components = 0.000807524 Jy
! Clean residual min=-0.001740 max=0.001783 Jy/beam
! Clean residual mean=0.000000 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.26242 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 102 components and 0.26242 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061996Jy  sigma=1.325828
! Fit after  self-cal, rms=0.061996Jy  sigma=1.325796
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000203169 Jy
! Component: 100  -  total flux cleaned = 0.000155032 Jy
! Component: 150  -  total flux cleaned = 0.000109011 Jy
! Component: 200  -  total flux cleaned = 8.73153e-05 Jy
! Total flux subtracted in 200 components = 8.73153e-05 Jy
! Clean residual min=-0.001717 max=0.001777 Jy/beam
! Clean residual mean=0.000000 rms=0.000423 Jy/beam
! Combined flux in latest and established models = 0.262507 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 110 components and 0.262507 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061977Jy  sigma=1.325465
! Fit after  self-cal, rms=0.061977Jy  sigma=1.325455
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061977Jy  sigma=1.325455
! Fit after  self-cal, rms=0.061942Jy  sigma=1.325412
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.763 mas, bmaj=11.01 mas, bpa=-8.129 degrees
! Estimated noise=0.468484 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000164131 Jy
! Component: 100  -  total flux cleaned = -0.000209963 Jy
! Component: 150  -  total flux cleaned = -0.000222914 Jy
! Component: 200  -  total flux cleaned = -0.000223168 Jy
! Total flux subtracted in 200 components = -0.000223168 Jy
! Clean residual min=-0.002078 max=0.001857 Jy/beam
! Clean residual mean=0.000001 rms=0.000463 Jy/beam
! Combined flux in latest and established models = 0.262284 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 125 components and 0.262284 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061942Jy  sigma=1.325401
! Fit after  self-cal, rms=0.061941Jy  sigma=1.325391
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.58622e-05 Jy
! Component: 100  -  total flux cleaned = -9.73729e-05 Jy
! Component: 150  -  total flux cleaned = -9.74474e-05 Jy
! Component: 200  -  total flux cleaned = -9.7575e-05 Jy
! Total flux subtracted in 200 components = -9.7575e-05 Jy
! Clean residual min=-0.002081 max=0.001853 Jy/beam
! Clean residual mean=0.000001 rms=0.000459 Jy/beam
! Combined flux in latest and established models = 0.262186 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 133 components and 0.262186 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061942Jy  sigma=1.325405
! Fit after  self-cal, rms=0.061941Jy  sigma=1.325398
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.235 mas, bmaj=7.256 mas, bpa=-6.08 degrees
! Estimated noise=0.368546 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.235 x 7.256 at -6.08 degrees (North through East)
! Clean map  min=-0.0016085  max=0.11037 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.715 mas, bmaj=6.464 mas, bpa=-4.246 degrees
! Estimated noise=0.586161 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0999773 Jy
! Component: 100  -  total flux cleaned = 0.154173 Jy
! Component: 150  -  total flux cleaned = 0.186841 Jy
! Component: 200  -  total flux cleaned = 0.206952 Jy
! Total flux subtracted in 200 components = 0.206952 Jy
! Clean residual min=-0.006388 max=0.010536 Jy/beam
! Clean residual mean=-0.000001 rms=0.001714 Jy/beam
! Combined flux in latest and established models = 0.206952 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.206952 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.235 mas, bmaj=7.256 mas, bpa=-6.08 degrees
! Estimated noise=0.368546 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0165963 Jy
! Component: 100  -  total flux cleaned = 0.027295 Jy
! Component: 150  -  total flux cleaned = 0.0345563 Jy
! Component: 200  -  total flux cleaned = 0.0396445 Jy
! Total flux subtracted in 200 components = 0.0396445 Jy
! Clean residual min=-0.002234 max=0.002906 Jy/beam
! Clean residual mean=0.000002 rms=0.000664 Jy/beam
! Combined flux in latest and established models = 0.246596 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 50 components and 0.246596 Jy
! Inverting map 
! Added new window around map position (2.5, 1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00377089 Jy
! Component: 100  -  total flux cleaned = 0.00662648 Jy
! Component: 150  -  total flux cleaned = 0.0088417 Jy
! Component: 200  -  total flux cleaned = 0.0106119 Jy
! Total flux subtracted in 200 components = 0.0106119 Jy
! Clean residual min=-0.001909 max=0.001969 Jy/beam
! Clean residual mean=0.000001 rms=0.000469 Jy/beam
! Combined flux in latest and established models = 0.257208 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 88 components and 0.257208 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.763 mas, bmaj=11.01 mas, bpa=-8.129 degrees
! Estimated noise=0.468484 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00226281 Jy
! Component: 100  -  total flux cleaned = 0.00343897 Jy
! Component: 150  -  total flux cleaned = 0.00395528 Jy
! Component: 200  -  total flux cleaned = 0.00437861 Jy
! Total flux subtracted in 200 components = 0.00437861 Jy
! Clean residual min=-0.002159 max=0.001797 Jy/beam
! Clean residual mean=0.000001 rms=0.000470 Jy/beam
! Combined flux in latest and established models = 0.261586 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000271449 Jy
! Component: 100  -  total flux cleaned = 0.000407307 Jy
! Component: 150  -  total flux cleaned = 0.000493191 Jy
! Component: 200  -  total flux cleaned = 0.000541265 Jy
! Total flux subtracted in 200 components = 0.000541265 Jy
! Clean residual min=-0.002065 max=0.001850 Jy/beam
! Clean residual mean=0.000001 rms=0.000456 Jy/beam
! Combined flux in latest and established models = 0.262128 Jy
! Adding 73 model components to the UV plane model.
! The established model now contains 151 components and 0.262128 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.235 mas, bmaj=7.256 mas, bpa=-6.08 degrees
! Estimated noise=0.368546 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00015484 Jy
! Component: 100  -  total flux cleaned = 0.000307805 Jy
! Component: 150  -  total flux cleaned = 0.000407715 Jy
! Component: 200  -  total flux cleaned = 0.00046704 Jy
! Total flux subtracted in 200 components = 0.00046704 Jy
! Clean residual min=-0.001795 max=0.001663 Jy/beam
! Clean residual mean=0.000000 rms=0.000415 Jy/beam
! Combined flux in latest and established models = 0.262595 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 166 components and 0.262595 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061919Jy  sigma=1.324963
! Fit after  self-cal, rms=0.061911Jy  sigma=1.324830
wmodel /J2203+1007_S_map.mod
! wmodel: Unable to open new model file: /J2203+1007_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J2203+1007_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.235 x 7.256 at -6.08 degrees (North through East)
! Clean map  min=-0.0016974  max=0.11078 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J2203+1007_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.110776 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000414544 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.12266 1.12266 2.24532 4.49064 8.98128 17.9626 35.9251 71.8502
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0012 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.11 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  267.222 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J2203+1007_S_dfm.log closed on Thu May 19 22:42:31 2016