! Started logfile: /scr/pima/bg219h_uvs/J2150-2812_S_uvs.log on Thu Apr  7 09:12:03 2016
obs /scr/pima/bg219h_uvs/J2150-2812_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J2150-2812_S_uva.fits
! AN table 1: 47 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.795272 visibilities/baseline/integration-bin.
! Found source: J2150-2812
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 6728 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219h_uvs/J2150-2812_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.023665Jy  sigma=17.871539
! Fit after  self-cal, rms=0.799790Jy  sigma=13.882077
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.516 mas, bmaj=6.285 mas, bpa=-8.158 degrees
! Estimated noise=0.765044 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.153815 Jy
! Component: 100  -  total flux cleaned = 0.190157 Jy
! Total flux subtracted in 100 components = 0.190157 Jy
! Clean residual min=-0.010117 max=0.016690 Jy/beam
! Clean residual mean=-0.000064 rms=0.002675 Jy/beam
! Combined flux in latest and established models = 0.190157 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.190157 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095675Jy  sigma=1.617498
! Fit after  self-cal, rms=0.095675Jy  sigma=1.617315
! Inverting map 
! Added new window around map position (3, 7).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0173389 Jy
! Component: 100  -  total flux cleaned = 0.027805 Jy
! Total flux subtracted in 100 components = 0.027805 Jy
! Clean residual min=-0.008013 max=0.014864 Jy/beam
! Clean residual mean=-0.000047 rms=0.002098 Jy/beam
! Combined flux in latest and established models = 0.217962 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 25 components and 0.217962 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091048Jy  sigma=1.516464
! Fit after  self-cal, rms=0.090980Jy  sigma=1.514550
! Inverting map 
! Added new window around map position (-6, 1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0134025 Jy
! Component: 100  -  total flux cleaned = 0.0214494 Jy
! Total flux subtracted in 100 components = 0.0214494 Jy
! Clean residual min=-0.007258 max=0.008709 Jy/beam
! Clean residual mean=-0.000035 rms=0.001743 Jy/beam
! Combined flux in latest and established models = 0.239411 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 37 components and 0.239411 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087864Jy  sigma=1.451602
! Fit after  self-cal, rms=0.087684Jy  sigma=1.449085
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.948 mas, bmaj=7.369 mas, bpa=-7.085 degrees
! Estimated noise=0.535795 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-12.5, -1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0145493 Jy
! Component: 100  -  total flux cleaned = 0.024202 Jy
! Component: 150  -  total flux cleaned = 0.0311614 Jy
! Component: 200  -  total flux cleaned = 0.0363731 Jy
! Total flux subtracted in 200 components = 0.0363731 Jy
! Clean residual min=-0.005835 max=0.006380 Jy/beam
! Clean residual mean=-0.000054 rms=0.001382 Jy/beam
! Combined flux in latest and established models = 0.275784 Jy
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 82 components and 0.275784 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084812Jy  sigma=1.392443
! Fit after  self-cal, rms=0.084530Jy  sigma=1.387369
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.948 x 7.369 at -7.085 degrees (North through East)
! Clean map  min=-0.0047993  max=0.19772 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00*    HN        1.11     KP        0.98     
!   LA        0.99     MK        1.03     NL        1.05     OV        0.97     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00*    HN        1.06     KP        0.96     
!   LA        1.02     MK        0.99     NL        1.16     OV        0.97     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00*    HN        1.14     KP        0.93     
!   LA        1.02     MK        1.02     NL        0.94     OV        0.99     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00*    HN        1.06     KP        0.97     
!   LA        0.97     MK        1.00     NL        0.91     OV        0.98     
!   PT        0.96     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.084530Jy  sigma=1.387369
! Fit after  self-cal, rms=0.084676Jy  sigma=1.366756
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.971 mas, bmaj=7.372 mas, bpa=-6.756 degrees
! Estimated noise=0.531137 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00213336 Jy
! Component: 100  -  total flux cleaned = 0.00301437 Jy
! Component: 150  -  total flux cleaned = 0.00367123 Jy
! Component: 200  -  total flux cleaned = 0.00400019 Jy
! Total flux subtracted in 200 components = 0.00400019 Jy
! Clean residual min=-0.003300 max=0.003958 Jy/beam
! Clean residual mean=-0.000022 rms=0.000875 Jy/beam
! Combined flux in latest and established models = 0.279784 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 104 components and 0.279784 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084407Jy  sigma=1.362312
! Fit after  self-cal, rms=0.084421Jy  sigma=1.361415
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084421Jy  sigma=1.361415
! Fit after  self-cal, rms=0.085024Jy  sigma=1.355604
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.972 mas, bmaj=7.382 mas, bpa=-6.843 degrees
! Estimated noise=0.531013 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000126044 Jy
! Component: 100  -  total flux cleaned = 0.000291369 Jy
! Component: 150  -  total flux cleaned = 0.000454033 Jy
! Component: 200  -  total flux cleaned = 0.000411517 Jy
! Total flux subtracted in 200 components = 0.000411517 Jy
! Clean residual min=-0.002942 max=0.002701 Jy/beam
! Clean residual mean=-0.000012 rms=0.000704 Jy/beam
! Combined flux in latest and established models = 0.280196 Jy
selfcal
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 138 components and 0.280196 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084916Jy  sigma=1.353862
! Fit after  self-cal, rms=0.084898Jy  sigma=1.353479
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000372943 Jy
! Component: 100  -  total flux cleaned = 0.000635198 Jy
! Component: 150  -  total flux cleaned = 0.000704689 Jy
! Component: 200  -  total flux cleaned = 0.000704033 Jy
! Total flux subtracted in 200 components = 0.000704033 Jy
! Clean residual min=-0.002838 max=0.002714 Jy/beam
! Clean residual mean=-0.000010 rms=0.000680 Jy/beam
! Combined flux in latest and established models = 0.2809 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 152 components and 0.2809 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084854Jy  sigma=1.352851
! Fit after  self-cal, rms=0.084843Jy  sigma=1.352716
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084843Jy  sigma=1.352716
! Fit after  self-cal, rms=0.085542Jy  sigma=1.351809
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.973 mas, bmaj=7.387 mas, bpa=-6.858 degrees
! Estimated noise=0.530677 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000326149 Jy
! Component: 100  -  total flux cleaned = -0.00027539 Jy
! Component: 150  -  total flux cleaned = -0.000415632 Jy
! Component: 200  -  total flux cleaned = -0.000477828 Jy
! Total flux subtracted in 200 components = -0.000477828 Jy
! Clean residual min=-0.002527 max=0.002561 Jy/beam
! Clean residual mean=-0.000003 rms=0.000633 Jy/beam
! Combined flux in latest and established models = 0.280422 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 166 components and 0.280422 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085499Jy  sigma=1.351237
! Fit after  self-cal, rms=0.085499Jy  sigma=1.351147
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000232179 Jy
! Component: 100  -  total flux cleaned = 0.000319385 Jy
! Component: 150  -  total flux cleaned = 0.000320261 Jy
! Component: 200  -  total flux cleaned = 0.000321131 Jy
! Total flux subtracted in 200 components = 0.000321131 Jy
! Clean residual min=-0.002464 max=0.002550 Jy/beam
! Clean residual mean=-0.000002 rms=0.000624 Jy/beam
! Combined flux in latest and established models = 0.280743 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 176 components and 0.280743 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085479Jy  sigma=1.350878
! Fit after  self-cal, rms=0.085475Jy  sigma=1.350837
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085475Jy  sigma=1.350837
! Fit after  self-cal, rms=0.085755Jy  sigma=1.350749
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.371 mas, bmaj=17.84 mas, bpa=-2.566 degrees
! Estimated noise=0.686483 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000368658 Jy
! Component: 100  -  total flux cleaned = -0.000448981 Jy
! Component: 150  -  total flux cleaned = -0.000495986 Jy
! Component: 200  -  total flux cleaned = -0.000524541 Jy
! Total flux subtracted in 200 components = -0.000524541 Jy
! Clean residual min=-0.002748 max=0.002775 Jy/beam
! Clean residual mean=0.000003 rms=0.000762 Jy/beam
! Combined flux in latest and established models = 0.280219 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 189 components and 0.280219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085748Jy  sigma=1.350682
! Fit after  self-cal, rms=0.085749Jy  sigma=1.350649
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.99945e-05 Jy
! Component: 100  -  total flux cleaned = 1.46755e-05 Jy
! Component: 150  -  total flux cleaned = 2.81629e-05 Jy
! Component: 200  -  total flux cleaned = 2.81403e-05 Jy
! Total flux subtracted in 200 components = 2.81403e-05 Jy
! Clean residual min=-0.002689 max=0.002701 Jy/beam
! Clean residual mean=0.000004 rms=0.000755 Jy/beam
! Combined flux in latest and established models = 0.280247 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 207 components and 0.280247 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085745Jy  sigma=1.350612
! Fit after  self-cal, rms=0.085745Jy  sigma=1.350603
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.974 mas, bmaj=7.39 mas, bpa=-6.833 degrees
! Estimated noise=0.530808 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.974 x 7.39 at -6.833 degrees (North through East)
! Clean map  min=-0.0023105  max=0.19561 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.538 mas, bmaj=6.287 mas, bpa=-7.649 degrees
! Estimated noise=0.760412 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.152651 Jy
! Component: 100  -  total flux cleaned = 0.188313 Jy
! Component: 150  -  total flux cleaned = 0.205708 Jy
! Component: 200  -  total flux cleaned = 0.218468 Jy
! Total flux subtracted in 200 components = 0.218468 Jy
! Clean residual min=-0.005617 max=0.007433 Jy/beam
! Clean residual mean=-0.000035 rms=0.001612 Jy/beam
! Combined flux in latest and established models = 0.218468 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 33 model components to the UV plane model.
! The established model now contains 33 components and 0.218468 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.974 mas, bmaj=7.39 mas, bpa=-6.833 degrees
! Estimated noise=0.530808 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0170068 Jy
! Component: 100  -  total flux cleaned = 0.0285415 Jy
! Component: 150  -  total flux cleaned = 0.0367046 Jy
! Component: 200  -  total flux cleaned = 0.042711 Jy
! Total flux subtracted in 200 components = 0.042711 Jy
! Clean residual min=-0.003040 max=0.003738 Jy/beam
! Clean residual mean=-0.000037 rms=0.000939 Jy/beam
! Combined flux in latest and established models = 0.261179 Jy
! Adding 60 model components to the UV plane model.
! The established model now contains 85 components and 0.261179 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.371 mas, bmaj=17.84 mas, bpa=-2.566 degrees
! Estimated noise=0.686483 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00781878 Jy
! Component: 100  -  total flux cleaned = 0.0120354 Jy
! Component: 150  -  total flux cleaned = 0.0145118 Jy
! Component: 200  -  total flux cleaned = 0.0160583 Jy
! Total flux subtracted in 200 components = 0.0160583 Jy
! Clean residual min=-0.002674 max=0.002565 Jy/beam
! Clean residual mean=-0.000006 rms=0.000764 Jy/beam
! Combined flux in latest and established models = 0.277237 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000989238 Jy
! Component: 100  -  total flux cleaned = 0.00163058 Jy
! Component: 150  -  total flux cleaned = 0.0019639 Jy
! Component: 200  -  total flux cleaned = 0.0020347 Jy
! Total flux subtracted in 200 components = 0.0020347 Jy
! Clean residual min=-0.002561 max=0.002470 Jy/beam
! Clean residual mean=0.000003 rms=0.000743 Jy/beam
! Combined flux in latest and established models = 0.279272 Jy
! Adding 87 model components to the UV plane model.
! The established model now contains 163 components and 0.279272 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.974 mas, bmaj=7.39 mas, bpa=-6.833 degrees
! Estimated noise=0.530808 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00011316 Jy
! Component: 100  -  total flux cleaned = 0.000167942 Jy
! Component: 150  -  total flux cleaned = 0.000126684 Jy
! Component: 200  -  total flux cleaned = 8.86351e-05 Jy
! Total flux subtracted in 200 components = 8.86351e-05 Jy
! Clean residual min=-0.002368 max=0.002547 Jy/beam
! Clean residual mean=0.000001 rms=0.000621 Jy/beam
! Combined flux in latest and established models = 0.27936 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 180 components and 0.27936 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085796Jy  sigma=1.351223
! Fit after  self-cal, rms=0.085772Jy  sigma=1.351020
wmodel /scr/pima/bg219h_uvs/J2150-2812_S_map.mod
! Writing 180 model components to file: /scr/pima/bg219h_uvs/J2150-2812_S_map.mod
wobs /scr/pima/bg219h_uvs/J2150-2812_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219h_uvs/J2150-2812_S_uvs.fits
wwins /scr/pima/bg219h_uvs/J2150-2812_S_map.win
! wwins: Wrote 4 windows to /scr/pima/bg219h_uvs/J2150-2812_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000577467 Jy
! Component: 100  -  total flux cleaned = 0.000321576 Jy
! Component: 150  -  total flux cleaned = 0.000119028 Jy
! Component: 200  -  total flux cleaned = -3.45007e-05 Jy
! Component: 250  -  total flux cleaned = -0.000181913 Jy
! Component: 300  -  total flux cleaned = 7.2273e-05 Jy
! Component: 350  -  total flux cleaned = 0.000316818 Jy
! Component: 400  -  total flux cleaned = 0.000418462 Jy
! Component: 450  -  total flux cleaned = 0.000584287 Jy
! Component: 500  -  total flux cleaned = 0.000746662 Jy
! Component: 550  -  total flux cleaned = 0.000841632 Jy
! Component: 600  -  total flux cleaned = 0.000934894 Jy
! Component: 650  -  total flux cleaned = 0.000995396 Jy
! Component: 700  -  total flux cleaned = 0.000995393 Jy
! Component: 750  -  total flux cleaned = 0.00102526 Jy
! Component: 800  -  total flux cleaned = 0.00108333 Jy
! Component: 850  -  total flux cleaned = 0.00108322 Jy
! Component: 900  -  total flux cleaned = 0.00105565 Jy
! Component: 950  -  total flux cleaned = 0.00116638 Jy
! Component: 1000  -  total flux cleaned = 0.00127468 Jy
! Component: 1050  -  total flux cleaned = 0.0013009 Jy
! Component: 1100  -  total flux cleaned = 0.00138038 Jy
! Component: 1150  -  total flux cleaned = 0.00145825 Jy
! Component: 1200  -  total flux cleaned = 0.0014326 Jy
! Component: 1250  -  total flux cleaned = 0.00148345 Jy
! Component: 1300  -  total flux cleaned = 0.00148333 Jy
! Component: 1350  -  total flux cleaned = 0.00148381 Jy
! Component: 1400  -  total flux cleaned = 0.00148378 Jy
! Component: 1450  -  total flux cleaned = 0.00146016 Jy
! Component: 1500  -  total flux cleaned = 0.00153207 Jy
! Component: 1550  -  total flux cleaned = 0.00153193 Jy
! Component: 1600  -  total flux cleaned = 0.00150876 Jy
! Component: 1650  -  total flux cleaned = 0.00146267 Jy
! Component: 1700  -  total flux cleaned = 0.00150852 Jy
! Component: 1750  -  total flux cleaned = 0.00150885 Jy
! Component: 1800  -  total flux cleaned = 0.00155356 Jy
! Component: 1850  -  total flux cleaned = 0.00150939 Jy
! Component: 1900  -  total flux cleaned = 0.001663 Jy
! Component: 1950  -  total flux cleaned = 0.00177126 Jy
! Component: 2000  -  total flux cleaned = 0.00170653 Jy
! Component: 2050  -  total flux cleaned = 0.00174961 Jy
! Component: 2100  -  total flux cleaned = 0.0019182 Jy
! Component: 2150  -  total flux cleaned = 0.00187611 Jy
! Component: 2200  -  total flux cleaned = 0.00189688 Jy
! Component: 2250  -  total flux cleaned = 0.00195845 Jy
! Component: 2300  -  total flux cleaned = 0.00191764 Jy
! Component: 2350  -  total flux cleaned = 0.00195787 Jy
! Component: 2400  -  total flux cleaned = 0.00193758 Jy
! Component: 2450  -  total flux cleaned = 0.00191792 Jy
! Component: 2500  -  total flux cleaned = 0.00197715 Jy
! Component: 2550  -  total flux cleaned = 0.00201629 Jy
! Component: 2600  -  total flux cleaned = 0.00211322 Jy
! Component: 2650  -  total flux cleaned = 0.00217104 Jy
! Component: 2700  -  total flux cleaned = 0.00226652 Jy
! Component: 2750  -  total flux cleaned = 0.00230436 Jy
! Component: 2800  -  total flux cleaned = 0.00243565 Jy
! Component: 2850  -  total flux cleaned = 0.00237981 Jy
! Component: 2900  -  total flux cleaned = 0.00243507 Jy
! Component: 2950  -  total flux cleaned = 0.00247164 Jy
! Component: 3000  -  total flux cleaned = 0.00256284 Jy
! Component: 3050  -  total flux cleaned = 0.00259885 Jy
! Component: 3100  -  total flux cleaned = 0.00272402 Jy
! Component: 3150  -  total flux cleaned = 0.00274201 Jy
! Component: 3200  -  total flux cleaned = 0.00288293 Jy
! Component: 3250  -  total flux cleaned = 0.00286537 Jy
! Component: 3300  -  total flux cleaned = 0.00298677 Jy
! Component: 3350  -  total flux cleaned = 0.00300418 Jy
! Component: 3400  -  total flux cleaned = 0.00305577 Jy
! Component: 3450  -  total flux cleaned = 0.00310704 Jy
! Component: 3500  -  total flux cleaned = 0.00322519 Jy
! Component: 3550  -  total flux cleaned = 0.00329225 Jy
! Component: 3600  -  total flux cleaned = 0.0033589 Jy
! Component: 3650  -  total flux cleaned = 0.00339197 Jy
! Component: 3700  -  total flux cleaned = 0.00355633 Jy
! Component: 3750  -  total flux cleaned = 0.00360508 Jy
! Component: 3800  -  total flux cleaned = 0.00370243 Jy
! Component: 3850  -  total flux cleaned = 0.00378302 Jy
! Component: 3900  -  total flux cleaned = 0.00381517 Jy
! Component: 3950  -  total flux cleaned = 0.0039425 Jy
! Component: 4000  -  total flux cleaned = 0.0040373 Jy
! Component: 4050  -  total flux cleaned = 0.00410027 Jy
! Total flux subtracted in 4096 components = 0.00420979 Jy
! Clean residual min=-0.000990 max=0.000882 Jy/beam
! Clean residual mean=-0.000000 rms=0.000281 Jy/beam
! Combined flux in latest and established models = 0.28357 Jy
keep
! Adding 296 model components to the UV plane model.
! The established model now contains 476 components and 0.28357 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219h_uvs/J2150-2812_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.974 x 7.39 at -6.833 degrees (North through East)
! Clean map  min=-0.0015506  max=0.19699 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J2150-2812_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.196992 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00027705 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.42192 0.42192 0.843841 1.68768 3.37536 6.75072 13.5014 27.0029 54.0058
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.196 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  711.034 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J2150-2812_S_uvs.log closed on Thu Apr  7 09:12:07 2016