! Started logfile: /scr/pima/bg219h_uvs/J2143-2549_S_dfm.log on Thu May 19 22:41:40 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219h_uvs/J2143-2549_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219h_uvs/J2143-2549_S_uva.fits ! AN table 1: 62 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.933244 visibilities/baseline/integration-bin. ! Found source: J2143-2549 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 8332 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2143-2549_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.007261Jy sigma=17.932648 ! Fit after self-cal, rms=0.912471Jy sigma=16.266869 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.44 mas, bmaj=6.38 mas, bpa=-7.333 degrees ! Estimated noise=0.659347 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0699601 Jy ! Component: 100 - total flux cleaned = 0.0854222 Jy ! Total flux subtracted in 100 components = 0.0854222 Jy ! Clean residual min=-0.004264 max=0.005905 Jy/beam ! Clean residual mean=-0.000009 rms=0.001074 Jy/beam ! Combined flux in latest and established models = 0.0854222 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0854222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082282Jy sigma=1.391586 ! Fit after self-cal, rms=0.081817Jy sigma=1.383635 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.869 mas, bmaj=7.182 mas, bpa=-6.05 degrees ! Estimated noise=0.470765 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00607094 Jy ! Component: 100 - total flux cleaned = 0.00860611 Jy ! Component: 150 - total flux cleaned = 0.00979299 Jy ! Component: 200 - total flux cleaned = 0.0100475 Jy ! Total flux subtracted in 200 components = 0.0100475 Jy ! Clean residual min=-0.003226 max=0.004176 Jy/beam ! Clean residual mean=-0.000014 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 0.0954697 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 13 components and 0.0954697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081416Jy sigma=1.376103 ! Fit after self-cal, rms=0.081421Jy sigma=1.376006 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.869 x 7.182 at -6.05 degrees (North through East) ! Clean map min=-0.0030493 max=0.090677 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 HN 1.06 KP 0.97 LA 1.01 ! MK 1.02 NL 0.92 OV 0.94 PT 0.99 ! SC 0.93 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 HN 1.14 KP 0.95 LA 1.01 ! MK 0.96 NL 1.01 OV 0.98 PT 0.98 ! SC 0.98 ! ! ! Fit before self-cal, rms=0.081421Jy sigma=1.376006 ! Fit after self-cal, rms=0.080685Jy sigma=1.373516 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.873 mas, bmaj=7.158 mas, bpa=-5.788 degrees ! Estimated noise=0.462624 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00112301 Jy ! Component: 100 - total flux cleaned = -0.00112263 Jy ! Component: 150 - total flux cleaned = -0.00112359 Jy ! Component: 200 - total flux cleaned = -0.00112529 Jy ! Total flux subtracted in 200 components = -0.00112529 Jy ! Clean residual min=-0.003212 max=0.003649 Jy/beam ! Clean residual mean=-0.000020 rms=0.000824 Jy/beam ! Combined flux in latest and established models = 0.0943445 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 21 components and 0.0943444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080663Jy sigma=1.373163 ! Fit after self-cal, rms=0.080706Jy sigma=1.373065 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080706Jy sigma=1.373065 ! Fit after self-cal, rms=0.080392Jy sigma=1.371168 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.882 mas, bmaj=7.178 mas, bpa=-5.657 degrees ! Estimated noise=0.458307 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00118996 Jy ! Component: 100 - total flux cleaned = -0.00134156 Jy ! Component: 150 - total flux cleaned = -0.00134214 Jy ! Component: 200 - total flux cleaned = -0.00135986 Jy ! Total flux subtracted in 200 components = -0.00135986 Jy ! Clean residual min=-0.002875 max=0.003453 Jy/beam ! Clean residual mean=-0.000016 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.0929846 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 25 components and 0.0929846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080371Jy sigma=1.370794 ! Fit after self-cal, rms=0.080406Jy sigma=1.370690 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6.5, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0032355 Jy ! Component: 100 - total flux cleaned = 0.00426055 Jy ! Component: 150 - total flux cleaned = 0.00443398 Jy ! Component: 200 - total flux cleaned = 0.00447226 Jy ! Total flux subtracted in 200 components = 0.00447226 Jy ! Clean residual min=-0.002678 max=0.002972 Jy/beam ! Clean residual mean=-0.000013 rms=0.000687 Jy/beam ! Combined flux in latest and established models = 0.0974568 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 45 components and 0.0974568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080299Jy sigma=1.367811 ! Fit after self-cal, rms=0.080272Jy sigma=1.367357 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080272Jy sigma=1.367357 ! Fit after self-cal, rms=0.079876Jy sigma=1.365666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.887 mas, bmaj=7.195 mas, bpa=-5.523 degrees ! Estimated noise=0.456529 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000804 Jy ! Component: 100 - total flux cleaned = 0.000976738 Jy ! Component: 150 - total flux cleaned = 0.000911633 Jy ! Component: 200 - total flux cleaned = 0.000821847 Jy ! Total flux subtracted in 200 components = 0.000821847 Jy ! Clean residual min=-0.002640 max=0.002736 Jy/beam ! Clean residual mean=-0.000012 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.0982787 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 50 components and 0.0982786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079840Jy sigma=1.364751 ! Fit after self-cal, rms=0.079845Jy sigma=1.364571 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000329087 Jy ! Component: 100 - total flux cleaned = 0.000246131 Jy ! Component: 150 - total flux cleaned = 0.000196528 Jy ! Component: 200 - total flux cleaned = 0.000196291 Jy ! Total flux subtracted in 200 components = 0.000196291 Jy ! Clean residual min=-0.002631 max=0.002635 Jy/beam ! Clean residual mean=-0.000012 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.0984749 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 59 components and 0.0984749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079829Jy sigma=1.364242 ! Fit after self-cal, rms=0.079827Jy sigma=1.364221 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079827Jy sigma=1.364221 ! Fit after self-cal, rms=0.079461Jy sigma=1.364026 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.063 mas, bmaj=16.19 mas, bpa=-0.6976 degrees ! Estimated noise=0.602369 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000578453 Jy ! Component: 100 - total flux cleaned = 0.000607646 Jy ! Component: 150 - total flux cleaned = 0.000657318 Jy ! Component: 200 - total flux cleaned = 0.000677808 Jy ! Total flux subtracted in 200 components = 0.000677808 Jy ! Clean residual min=-0.002628 max=0.002895 Jy/beam ! Clean residual mean=-0.000030 rms=0.000811 Jy/beam ! Combined flux in latest and established models = 0.0991527 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 74 components and 0.0991527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079461Jy sigma=1.363956 ! Fit after self-cal, rms=0.079454Jy sigma=1.363864 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.86169e-05 Jy ! Component: 100 - total flux cleaned = 8.25619e-05 Jy ! Component: 150 - total flux cleaned = 0.000142519 Jy ! Component: 200 - total flux cleaned = 0.000176779 Jy ! Total flux subtracted in 200 components = 0.000176779 Jy ! Clean residual min=-0.002591 max=0.002846 Jy/beam ! Clean residual mean=-0.000030 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.0993295 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 78 components and 0.0993295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079459Jy sigma=1.363915 ! Fit after self-cal, rms=0.079452Jy sigma=1.363858 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.892 mas, bmaj=7.206 mas, bpa=-5.482 degrees ! Estimated noise=0.454571 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.892 x 7.206 at -5.482 degrees (North through East) ! Clean map min=-0.0024356 max=0.086432 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.463 mas, bmaj=6.389 mas, bpa=-6.753 degrees ! Estimated noise=0.639055 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.067962 Jy ! Component: 100 - total flux cleaned = 0.0834079 Jy ! Component: 150 - total flux cleaned = 0.0893667 Jy ! Component: 200 - total flux cleaned = 0.0923947 Jy ! Total flux subtracted in 200 components = 0.0923947 Jy ! Clean residual min=-0.003862 max=0.003746 Jy/beam ! Clean residual mean=-0.000005 rms=0.000868 Jy/beam ! Combined flux in latest and established models = 0.0923947 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0923947 Jy ! Inverting map and beam ! Estimated beam: bmin=2.892 mas, bmaj=7.206 mas, bpa=-5.482 degrees ! Estimated noise=0.454571 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0035919 Jy ! Component: 100 - total flux cleaned = 0.00581798 Jy ! Component: 150 - total flux cleaned = 0.00725406 Jy ! Component: 200 - total flux cleaned = 0.00772065 Jy ! Total flux subtracted in 200 components = 0.00772065 Jy ! Clean residual min=-0.002485 max=0.002366 Jy/beam ! Clean residual mean=-0.000011 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.100115 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 38 components and 0.100115 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.063 mas, bmaj=16.19 mas, bpa=-0.6976 degrees ! Estimated noise=0.602369 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000593951 Jy ! Component: 100 - total flux cleaned = 0.000788686 Jy ! Component: 150 - total flux cleaned = 0.000757352 Jy ! Component: 200 - total flux cleaned = 0.000703832 Jy ! Total flux subtracted in 200 components = 0.000703832 Jy ! Clean residual min=-0.002518 max=0.002593 Jy/beam ! Clean residual mean=-0.000027 rms=0.000765 Jy/beam ! Combined flux in latest and established models = 0.100819 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.69323e-05 Jy ! Component: 100 - total flux cleaned = -6.8506e-05 Jy ! Component: 150 - total flux cleaned = -6.82986e-05 Jy ! Component: 200 - total flux cleaned = -8.72176e-05 Jy ! Total flux subtracted in 200 components = -8.72176e-05 Jy ! Clean residual min=-0.002511 max=0.002535 Jy/beam ! Clean residual mean=-0.000028 rms=0.000758 Jy/beam ! Combined flux in latest and established models = 0.100732 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 68 components and 0.100732 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.892 mas, bmaj=7.206 mas, bpa=-5.482 degrees ! Estimated noise=0.454571 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000347806 Jy ! Component: 100 - total flux cleaned = -0.000347619 Jy ! Component: 150 - total flux cleaned = -0.000317356 Jy ! Component: 200 - total flux cleaned = -0.000261209 Jy ! Total flux subtracted in 200 components = -0.000261209 Jy ! Clean residual min=-0.002509 max=0.002273 Jy/beam ! Clean residual mean=-0.000011 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.100471 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 86 components and 0.100471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079383Jy sigma=1.362394 ! Fit after self-cal, rms=0.079376Jy sigma=1.362133 wmodel /J2143-2549_S_map.mod ! wmodel: Unable to open new model file: /J2143-2549_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219h_uvs/J2143-2549_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.892 x 7.206 at -5.482 degrees (North through East) ! Clean map min=-0.0022642 max=0.086049 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J2143-2549_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0860495 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000603315 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.10338 2.10338 4.20676 8.41352 16.827 33.6541 67.3081 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.086 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 142.627 quit ! Quitting program ! Log file /scr/pima/bg219h_uvs/J2143-2549_S_dfm.log closed on Thu May 19 22:41:42 2016