! Started logfile: /scr/pima/bg219h_uvs/J2126-0654_S_uvs.log on Thu Apr  7 09:11:40 2016
obs /scr/pima/bg219h_uvs/J2126-0654_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J2126-0654_S_uva.fits
! AN table 1: 62 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.681004 visibilities/baseline/integration-bin.
! Found source: J2126-0654
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 6080 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219h_uvs/J2126-0654_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 87 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 87 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 87 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 87 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004135Jy  sigma=21.367485
! Fit after  self-cal, rms=0.950343Jy  sigma=20.231389
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.542 mas, bmaj=8.102 mas, bpa=-2.509 degrees
! Estimated noise=0.604919 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0400577 Jy
! Component: 100  -  total flux cleaned = 0.0490272 Jy
! Total flux subtracted in 100 components = 0.0490272 Jy
! Clean residual min=-0.003281 max=0.003282 Jy/beam
! Clean residual mean=-0.000000 rms=0.000858 Jy/beam
! Combined flux in latest and established models = 0.0490272 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0490272 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064202Jy  sigma=1.316555
! Fit after  self-cal, rms=0.062285Jy  sigma=1.277980
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00478988 Jy
! Component: 100  -  total flux cleaned = 0.00670387 Jy
! Total flux subtracted in 100 components = 0.00670387 Jy
! Clean residual min=-0.003068 max=0.002896 Jy/beam
! Clean residual mean=0.000001 rms=0.000790 Jy/beam
! Combined flux in latest and established models = 0.0557311 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 21 components and 0.0557311 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061944Jy  sigma=1.270775
! Fit after  self-cal, rms=0.061922Jy  sigma=1.270170
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.204 mas, bmaj=9.24 mas, bpa=-2.321 degrees
! Estimated noise=0.461937 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000675737 Jy
! Component: 100  -  total flux cleaned = 0.000676752 Jy
! Component: 150  -  total flux cleaned = 0.00072059 Jy
! Component: 200  -  total flux cleaned = 0.000755035 Jy
! Total flux subtracted in 200 components = 0.000755035 Jy
! Clean residual min=-0.002616 max=0.002586 Jy/beam
! Clean residual mean=0.000004 rms=0.000717 Jy/beam
! Combined flux in latest and established models = 0.0564861 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 29 components and 0.0564861 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061862Jy  sigma=1.268962
! Fit after  self-cal, rms=0.061829Jy  sigma=1.268365
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.204 x 9.24 at -2.321 degrees (North through East)
! Clean map  min=-0.0026072  max=0.054096 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     HN        1.00     KP        0.95     LA        1.14     
!   MK        0.88     NL        1.02     OV        1.02     PT        0.95     
!   SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     HN        1.02     KP        1.08     LA        1.15     
!   MK        0.91     NL        1.09     OV        0.93     PT        0.93     
!   SC        0.90     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     HN        0.92     KP        1.14     LA        1.10     
!   MK        1.06     NL        0.94     OV        0.94     PT        0.94     
!   SC        0.89     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     HN        1.07     KP        1.06     LA        0.98     
!   MK        0.97     NL        0.85     OV        1.00     PT        0.96     
!   SC        0.97     
! 
! 
! Fit before self-cal, rms=0.061829Jy  sigma=1.268365
! Fit after  self-cal, rms=0.062086Jy  sigma=1.263448
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.175 mas, bmaj=9.089 mas, bpa=-1.949 degrees
! Estimated noise=0.457791 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000840474 Jy
! Component: 100  -  total flux cleaned = 0.000780444 Jy
! Component: 150  -  total flux cleaned = 0.000758013 Jy
! Component: 200  -  total flux cleaned = 0.000739569 Jy
! Total flux subtracted in 200 components = 0.000739569 Jy
! Clean residual min=-0.002358 max=0.002235 Jy/beam
! Clean residual mean=0.000007 rms=0.000627 Jy/beam
! Combined flux in latest and established models = 0.0572257 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 40 components and 0.0572257 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062054Jy  sigma=1.262848
! Fit after  self-cal, rms=0.062194Jy  sigma=1.262013
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062194Jy  sigma=1.262013
! Fit after  self-cal, rms=0.061268Jy  sigma=1.259586
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.196 mas, bmaj=9.167 mas, bpa=-2.254 degrees
! Estimated noise=0.452384 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00110867 Jy
! Component: 100  -  total flux cleaned = -0.00119939 Jy
! Component: 150  -  total flux cleaned = -0.0012544 Jy
! Component: 200  -  total flux cleaned = -0.00128349 Jy
! Total flux subtracted in 200 components = -0.00128349 Jy
! Clean residual min=-0.002092 max=0.002146 Jy/beam
! Clean residual mean=0.000004 rms=0.000552 Jy/beam
! Combined flux in latest and established models = 0.0559422 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 54 components and 0.0559422 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061246Jy  sigma=1.259112
! Fit after  self-cal, rms=0.061267Jy  sigma=1.258749
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.05657e-05 Jy
! Component: 100  -  total flux cleaned = -7.97494e-05 Jy
! Component: 150  -  total flux cleaned = -0.000102671 Jy
! Component: 200  -  total flux cleaned = -0.000131962 Jy
! Total flux subtracted in 200 components = -0.000131962 Jy
! Clean residual min=-0.002085 max=0.002088 Jy/beam
! Clean residual mean=0.000004 rms=0.000551 Jy/beam
! Combined flux in latest and established models = 0.0558103 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 57 components and 0.0558103 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061262Jy  sigma=1.258642
! Fit after  self-cal, rms=0.061259Jy  sigma=1.258623
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061259Jy  sigma=1.258623
! Fit after  self-cal, rms=0.061661Jy  sigma=1.256298
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.173 mas, bmaj=9.103 mas, bpa=-2.284 degrees
! Estimated noise=0.450679 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000480324 Jy
! Component: 100  -  total flux cleaned = 0.000577126 Jy
! Component: 150  -  total flux cleaned = 0.000629461 Jy
! Component: 200  -  total flux cleaned = 0.000684922 Jy
! Total flux subtracted in 200 components = 0.000684922 Jy
! Clean residual min=-0.001859 max=0.002067 Jy/beam
! Clean residual mean=0.000002 rms=0.000491 Jy/beam
! Combined flux in latest and established models = 0.0564952 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 64 components and 0.0564952 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061653Jy  sigma=1.256116
! Fit after  self-cal, rms=0.061710Jy  sigma=1.255866
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.59365e-05 Jy
! Component: 100  -  total flux cleaned = 2.52467e-05 Jy
! Component: 150  -  total flux cleaned = 4.18603e-05 Jy
! Component: 200  -  total flux cleaned = 5.68997e-05 Jy
! Total flux subtracted in 200 components = 5.68997e-05 Jy
! Clean residual min=-0.001895 max=0.002028 Jy/beam
! Clean residual mean=0.000002 rms=0.000493 Jy/beam
! Combined flux in latest and established models = 0.0565521 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 66 components and 0.0565521 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061707Jy  sigma=1.255810
! Fit after  self-cal, rms=0.061707Jy  sigma=1.255801
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061707Jy  sigma=1.255801
! Fit after  self-cal, rms=0.061731Jy  sigma=1.255704
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.297 mas, bmaj=13.38 mas, bpa=-3.052 degrees
! Estimated noise=0.539904 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0004781 Jy
! Component: 100  -  total flux cleaned = 0.00049614 Jy
! Component: 150  -  total flux cleaned = 0.000509805 Jy
! Component: 200  -  total flux cleaned = 0.000527767 Jy
! Total flux subtracted in 200 components = 0.000527767 Jy
! Clean residual min=-0.002133 max=0.002171 Jy/beam
! Clean residual mean=0.000004 rms=0.000583 Jy/beam
! Combined flux in latest and established models = 0.0570798 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 74 components and 0.0570798 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061731Jy  sigma=1.255654
! Fit after  self-cal, rms=0.061738Jy  sigma=1.255612
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.085e-05 Jy
! Component: 100  -  total flux cleaned = 4.0019e-05 Jy
! Component: 150  -  total flux cleaned = 2.71534e-05 Jy
! Component: 200  -  total flux cleaned = 2.19467e-05 Jy
! Total flux subtracted in 200 components = 2.19467e-05 Jy
! Clean residual min=-0.002131 max=0.002169 Jy/beam
! Clean residual mean=0.000004 rms=0.000582 Jy/beam
! Combined flux in latest and established models = 0.0571018 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 80 components and 0.0571018 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061738Jy  sigma=1.255602
! Fit after  self-cal, rms=0.061736Jy  sigma=1.255583
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.158 mas, bmaj=9.073 mas, bpa=-2.319 degrees
! Estimated noise=0.449809 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.158 x 9.073 at -2.319 degrees (North through East)
! Clean map  min=-0.0018627  max=0.053043 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.495 mas, bmaj=7.973 mas, bpa=-2.866 degrees
! Estimated noise=0.578886 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0398801 Jy
! Component: 100  -  total flux cleaned = 0.0494231 Jy
! Component: 150  -  total flux cleaned = 0.0538183 Jy
! Component: 200  -  total flux cleaned = 0.05565 Jy
! Total flux subtracted in 200 components = 0.05565 Jy
! Clean residual min=-0.002492 max=0.002692 Jy/beam
! Clean residual mean=0.000000 rms=0.000636 Jy/beam
! Combined flux in latest and established models = 0.05565 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.05565 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.158 mas, bmaj=9.073 mas, bpa=-2.319 degrees
! Estimated noise=0.449809 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00103188 Jy
! Component: 100  -  total flux cleaned = 0.00124879 Jy
! Component: 150  -  total flux cleaned = 0.0012908 Jy
! Component: 200  -  total flux cleaned = 0.00132676 Jy
! Total flux subtracted in 200 components = 0.00132676 Jy
! Clean residual min=-0.002090 max=0.001989 Jy/beam
! Clean residual mean=0.000002 rms=0.000511 Jy/beam
! Combined flux in latest and established models = 0.0569767 Jy
! Adding 13 model components to the UV plane model.
! The established model now contains 26 components and 0.0569767 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.297 mas, bmaj=13.38 mas, bpa=-3.052 degrees
! Estimated noise=0.539904 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000391172 Jy
! Component: 100  -  total flux cleaned = 0.000298137 Jy
! Component: 150  -  total flux cleaned = 0.000259679 Jy
! Component: 200  -  total flux cleaned = 0.000241731 Jy
! Total flux subtracted in 200 components = 0.000241731 Jy
! Clean residual min=-0.002194 max=0.002154 Jy/beam
! Clean residual mean=0.000003 rms=0.000589 Jy/beam
! Combined flux in latest and established models = 0.0572185 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.19719e-05 Jy
! Component: 100  -  total flux cleaned = -5.85968e-05 Jy
! Component: 150  -  total flux cleaned = -7.02145e-05 Jy
! Component: 200  -  total flux cleaned = -8.17048e-05 Jy
! Total flux subtracted in 200 components = -8.17048e-05 Jy
! Clean residual min=-0.002166 max=0.002147 Jy/beam
! Clean residual mean=0.000004 rms=0.000584 Jy/beam
! Combined flux in latest and established models = 0.0571368 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 40 components and 0.0571368 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.158 mas, bmaj=9.073 mas, bpa=-2.319 degrees
! Estimated noise=0.449809 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00016209 Jy
! Component: 100  -  total flux cleaned = -0.000241636 Jy
! Component: 150  -  total flux cleaned = -0.000270916 Jy
! Component: 200  -  total flux cleaned = -0.000307735 Jy
! Total flux subtracted in 200 components = -0.000307735 Jy
! Clean residual min=-0.001941 max=0.002032 Jy/beam
! Clean residual mean=0.000002 rms=0.000491 Jy/beam
! Combined flux in latest and established models = 0.056829 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 48 components and 0.056829 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061736Jy  sigma=1.255754
! Fit after  self-cal, rms=0.061734Jy  sigma=1.255720
wmodel /scr/pima/bg219h_uvs/J2126-0654_S_map.mod
! Writing 48 model components to file: /scr/pima/bg219h_uvs/J2126-0654_S_map.mod
wobs /scr/pima/bg219h_uvs/J2126-0654_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219h_uvs/J2126-0654_S_uvs.fits
wwins /scr/pima/bg219h_uvs/J2126-0654_S_map.win
! wwins: Wrote 1 windows to /scr/pima/bg219h_uvs/J2126-0654_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 8.57379e-05 Jy
! Component: 100  -  total flux cleaned = 2.01963e-05 Jy
! Component: 150  -  total flux cleaned = 5.00793e-05 Jy
! Component: 200  -  total flux cleaned = 7.87858e-05 Jy
! Component: 250  -  total flux cleaned = 7.94518e-05 Jy
! Component: 300  -  total flux cleaned = 7.92862e-05 Jy
! Component: 350  -  total flux cleaned = 2.98124e-05 Jy
! Component: 400  -  total flux cleaned = 7.86778e-05 Jy
! Component: 450  -  total flux cleaned = 0.000125615 Jy
! Component: 500  -  total flux cleaned = 0.000194673 Jy
! Component: 550  -  total flux cleaned = 0.000284176 Jy
! Component: 600  -  total flux cleaned = 0.000349753 Jy
! Component: 650  -  total flux cleaned = 0.000477881 Jy
! Component: 700  -  total flux cleaned = 0.000602644 Jy
! Component: 750  -  total flux cleaned = 0.000785957 Jy
! Component: 800  -  total flux cleaned = 0.000885831 Jy
! Component: 850  -  total flux cleaned = 0.00102319 Jy
! Component: 900  -  total flux cleaned = 0.00115785 Jy
! Component: 950  -  total flux cleaned = 0.00128986 Jy
! Component: 1000  -  total flux cleaned = 0.00140077 Jy
! Component: 1050  -  total flux cleaned = 0.00149189 Jy
! Component: 1100  -  total flux cleaned = 0.00161716 Jy
! Component: 1150  -  total flux cleaned = 0.00172262 Jy
! Component: 1200  -  total flux cleaned = 0.00182594 Jy
! Component: 1250  -  total flux cleaned = 0.00189362 Jy
! Component: 1300  -  total flux cleaned = 0.00197696 Jy
! Component: 1350  -  total flux cleaned = 0.00200956 Jy
! Component: 1400  -  total flux cleaned = 0.00202613 Jy
! Component: 1450  -  total flux cleaned = 0.00212208 Jy
! Component: 1500  -  total flux cleaned = 0.0021377 Jy
! Component: 1550  -  total flux cleaned = 0.00223038 Jy
! Component: 1600  -  total flux cleaned = 0.00229149 Jy
! Component: 1650  -  total flux cleaned = 0.00236668 Jy
! Component: 1700  -  total flux cleaned = 0.00238141 Jy
! Component: 1750  -  total flux cleaned = 0.00245441 Jy
! Component: 1800  -  total flux cleaned = 0.00246869 Jy
! Component: 1850  -  total flux cleaned = 0.00251108 Jy
! Component: 1900  -  total flux cleaned = 0.00249695 Jy
! Component: 1950  -  total flux cleaned = 0.00253871 Jy
! Component: 2000  -  total flux cleaned = 0.0025938 Jy
! Component: 2050  -  total flux cleaned = 0.00259366 Jy
! Component: 2100  -  total flux cleaned = 0.00266093 Jy
! Component: 2150  -  total flux cleaned = 0.00268756 Jy
! Component: 2200  -  total flux cleaned = 0.00271397 Jy
! Component: 2250  -  total flux cleaned = 0.00277861 Jy
! Component: 2300  -  total flux cleaned = 0.00279148 Jy
! Component: 2350  -  total flux cleaned = 0.00284225 Jy
! Component: 2400  -  total flux cleaned = 0.00286744 Jy
! Component: 2450  -  total flux cleaned = 0.00294209 Jy
! Component: 2500  -  total flux cleaned = 0.002942 Jy
! Component: 2550  -  total flux cleaned = 0.00296651 Jy
! Component: 2600  -  total flux cleaned = 0.00300276 Jy
! Component: 2650  -  total flux cleaned = 0.00301497 Jy
! Component: 2700  -  total flux cleaned = 0.00307425 Jy
! Component: 2750  -  total flux cleaned = 0.0031212 Jy
! Component: 2800  -  total flux cleaned = 0.00313289 Jy
! Component: 2850  -  total flux cleaned = 0.00322498 Jy
! Component: 2900  -  total flux cleaned = 0.00321355 Jy
! Component: 2950  -  total flux cleaned = 0.00330411 Jy
! Component: 3000  -  total flux cleaned = 0.00331532 Jy
! Component: 3050  -  total flux cleaned = 0.00335983 Jy
! Component: 3100  -  total flux cleaned = 0.00340393 Jy
! Component: 3150  -  total flux cleaned = 0.0034695 Jy
! Component: 3200  -  total flux cleaned = 0.0035129 Jy
! Component: 3250  -  total flux cleaned = 0.00357717 Jy
! Component: 3300  -  total flux cleaned = 0.00359841 Jy
! Component: 3350  -  total flux cleaned = 0.00360899 Jy
! Component: 3400  -  total flux cleaned = 0.0036719 Jy
! Component: 3450  -  total flux cleaned = 0.00368224 Jy
! Component: 3500  -  total flux cleaned = 0.00371323 Jy
! Component: 3550  -  total flux cleaned = 0.00375414 Jy
! Component: 3600  -  total flux cleaned = 0.00378467 Jy
! Component: 3650  -  total flux cleaned = 0.00382519 Jy
! Component: 3700  -  total flux cleaned = 0.0038754 Jy
! Component: 3750  -  total flux cleaned = 0.00392529 Jy
! Component: 3800  -  total flux cleaned = 0.00393525 Jy
! Component: 3850  -  total flux cleaned = 0.00394506 Jy
! Component: 3900  -  total flux cleaned = 0.00397446 Jy
! Component: 3950  -  total flux cleaned = 0.00397441 Jy
! Component: 4000  -  total flux cleaned = 0.00399376 Jy
! Component: 4050  -  total flux cleaned = 0.00402268 Jy
! Total flux subtracted in 4096 components = 0.00403224 Jy
! Clean residual min=-0.000594 max=0.000577 Jy/beam
! Clean residual mean=0.000001 rms=0.000176 Jy/beam
! Combined flux in latest and established models = 0.0608613 Jy
keep
! Adding 267 model components to the UV plane model.
! The established model now contains 315 components and 0.0608612 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219h_uvs/J2126-0654_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.158 x 9.073 at -2.319 degrees (North through East)
! Clean map  min=-0.0013683  max=0.053002 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J2126-0654_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0530015 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000170143 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.963045 0.963045 1.92609 3.85218 7.70436 15.4087 30.8174 61.6349
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.053 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  311.511 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J2126-0654_S_uvs.log closed on Thu Apr  7 09:11:44 2016