! Started logfile: /scr/pima/bg219h_uvs/J2120-0330_X_dfm.log on Thu May 19 22:40:56 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J2120-0330_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J2120-0330_X_uva.fits
! AN table 1: 52 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.728632 visibilities/baseline/integration-bin.
! Found source: J2120-0330
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 20460 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2120-0330_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.015491Jy  sigma=23.474914
! Fit after  self-cal, rms=0.862005Jy  sigma=19.858080
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7214 mas, bmaj=1.773 mas, bpa=1.378 degrees
! Estimated noise=0.375331 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.105539 Jy
! Component: 100  -  total flux cleaned = 0.13179 Jy
! Total flux subtracted in 100 components = 0.13179 Jy
! Clean residual min=-0.004228 max=0.010488 Jy/beam
! Clean residual mean=0.000005 rms=0.001244 Jy/beam
! Combined flux in latest and established models = 0.13179 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.13179 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068854Jy  sigma=1.474461
! Fit after  self-cal, rms=0.068487Jy  sigma=1.465417
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0116649 Jy
! Component: 100  -  total flux cleaned = 0.0178832 Jy
! Total flux subtracted in 100 components = 0.0178832 Jy
! Clean residual min=-0.002945 max=0.004827 Jy/beam
! Clean residual mean=0.000003 rms=0.000771 Jy/beam
! Combined flux in latest and established models = 0.149673 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 15 components and 0.149673 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066163Jy  sigma=1.396171
! Fit after  self-cal, rms=0.066167Jy  sigma=1.395657
! Inverting map 
! Added new window around map position (-1.2, -0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00483732 Jy
! Component: 100  -  total flux cleaned = 0.00806903 Jy
! Total flux subtracted in 100 components = 0.00806903 Jy
! Clean residual min=-0.002579 max=0.003555 Jy/beam
! Clean residual mean=0.000002 rms=0.000665 Jy/beam
! Combined flux in latest and established models = 0.157742 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 29 components and 0.157742 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065692Jy  sigma=1.383436
! Fit after  self-cal, rms=0.065676Jy  sigma=1.382649
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9076 mas, bmaj=2.076 mas, bpa=1.727 degrees
! Estimated noise=0.231877 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00356122 Jy
! Component: 100  -  total flux cleaned = 0.0056297 Jy
! Component: 150  -  total flux cleaned = 0.00646563 Jy
! Component: 200  -  total flux cleaned = 0.00696998 Jy
! Total flux subtracted in 200 components = 0.00696998 Jy
! Clean residual min=-0.002265 max=0.002781 Jy/beam
! Clean residual mean=0.000003 rms=0.000556 Jy/beam
! Combined flux in latest and established models = 0.164712 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 46 components and 0.164712 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065468Jy  sigma=1.377203
! Fit after  self-cal, rms=0.065470Jy  sigma=1.376787
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9076 x 2.076 at 1.727 degrees (North through East)
! Clean map  min=-0.0022398  max=0.13909 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.99     HN        1.12     KP        1.00     
!   LA        0.95     MK        0.98     NL        1.02     OV        1.00     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.12     KP        0.99     
!   LA        0.93     MK        0.99     NL        0.99     OV        1.02     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.08     KP        0.98     
!   LA        0.94     MK        1.00     NL        0.98     OV        1.01     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.05     KP        1.01     
!   LA        0.92     MK        0.97     NL        0.97     OV        1.00     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.11     KP        1.00     
!   LA        0.93     MK        0.97     NL        0.95     OV        1.00     
!   PT        1.02     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.14     KP        0.97     
!   LA        0.93     MK        1.00     NL        1.01     OV        0.98     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        1.05     KP        1.01     
!   LA        0.92     MK        1.00     NL        1.01     OV        0.97     
!   PT        1.07     SC        0.97     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.06     HN        1.11     KP        0.98     
!   LA        0.92     MK        0.97     NL        0.97     OV        0.97     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        1.04     KP        0.98     
!   LA        0.91     MK        0.94     NL        0.96     OV        0.99     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.11     KP        0.97     
!   LA        0.92     MK        0.95     NL        1.00     OV        1.00     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.08     KP        1.01     
!   LA        0.97     MK        1.00     NL        0.97     OV        1.01     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.17     KP        1.04     
!   LA        0.96     MK        0.94     NL        0.98     OV        1.01     
!   PT        1.01     SC        1.05     
! 
! 
! Fit before self-cal, rms=0.065470Jy  sigma=1.376787
! Fit after  self-cal, rms=0.067001Jy  sigma=1.366804
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9067 mas, bmaj=2.071 mas, bpa=1.752 degrees
! Estimated noise=0.231342 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000608366 Jy
! Component: 100  -  total flux cleaned = -0.000667174 Jy
! Component: 150  -  total flux cleaned = -0.000667624 Jy
! Component: 200  -  total flux cleaned = -0.00068683 Jy
! Total flux subtracted in 200 components = -0.00068683 Jy
! Clean residual min=-0.001369 max=0.001521 Jy/beam
! Clean residual mean=0.000002 rms=0.000353 Jy/beam
! Combined flux in latest and established models = 0.164025 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 51 components and 0.164025 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066979Jy  sigma=1.366319
! Fit after  self-cal, rms=0.067034Jy  sigma=1.366174
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067034Jy  sigma=1.366174
! Fit after  self-cal, rms=0.067026Jy  sigma=1.363834
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9053 mas, bmaj=2.069 mas, bpa=1.799 degrees
! Estimated noise=0.230972 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000351081 Jy
! Component: 100  -  total flux cleaned = -0.000425222 Jy
! Component: 150  -  total flux cleaned = -0.000455461 Jy
! Component: 200  -  total flux cleaned = -0.000481567 Jy
! Total flux subtracted in 200 components = -0.000481567 Jy
! Clean residual min=-0.001379 max=0.001394 Jy/beam
! Clean residual mean=0.000002 rms=0.000323 Jy/beam
! Combined flux in latest and established models = 0.163543 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 56 components and 0.163543 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067017Jy  sigma=1.363630
! Fit after  self-cal, rms=0.067017Jy  sigma=1.363588
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.17782e-05 Jy
! Component: 100  -  total flux cleaned = -2.15507e-05 Jy
! Component: 150  -  total flux cleaned = -3.18683e-05 Jy
! Component: 200  -  total flux cleaned = -5.07299e-05 Jy
! Total flux subtracted in 200 components = -5.07299e-05 Jy
! Clean residual min=-0.001390 max=0.001386 Jy/beam
! Clean residual mean=0.000002 rms=0.000321 Jy/beam
! Combined flux in latest and established models = 0.163493 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 58 components and 0.163493 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067014Jy  sigma=1.363504
! Fit after  self-cal, rms=0.067012Jy  sigma=1.363496
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067012Jy  sigma=1.363496
! Fit after  self-cal, rms=0.067087Jy  sigma=1.363469
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9049 mas, bmaj=2.068 mas, bpa=1.823 degrees
! Estimated noise=0.230831 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000212073 Jy
! Component: 100  -  total flux cleaned = -0.000296211 Jy
! Component: 150  -  total flux cleaned = -0.000295878 Jy
! Component: 200  -  total flux cleaned = -0.000287412 Jy
! Total flux subtracted in 200 components = -0.000287412 Jy
! Clean residual min=-0.001387 max=0.001376 Jy/beam
! Clean residual mean=0.000002 rms=0.000318 Jy/beam
! Combined flux in latest and established models = 0.163205 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 59 components and 0.163205 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067084Jy  sigma=1.363394
! Fit after  self-cal, rms=0.067084Jy  sigma=1.363386
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.75837e-06 Jy
! Component: 100  -  total flux cleaned = -1.72976e-05 Jy
! Component: 150  -  total flux cleaned = -2.46826e-05 Jy
! Component: 200  -  total flux cleaned = -3.21778e-05 Jy
! Total flux subtracted in 200 components = -3.21778e-05 Jy
! Clean residual min=-0.001389 max=0.001366 Jy/beam
! Clean residual mean=0.000002 rms=0.000317 Jy/beam
! Combined flux in latest and established models = 0.163173 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 63 components and 0.163173 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067082Jy  sigma=1.363351
! Fit after  self-cal, rms=0.067081Jy  sigma=1.363346
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067081Jy  sigma=1.363346
! Fit after  self-cal, rms=0.067092Jy  sigma=1.363338
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.098 mas, bmaj=3.473 mas, bpa=0.02295 degrees
! Estimated noise=0.284914 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000430868 Jy
! Component: 100  -  total flux cleaned = -0.000448312 Jy
! Component: 150  -  total flux cleaned = -0.00046285 Jy
! Component: 200  -  total flux cleaned = -0.000474823 Jy
! Total flux subtracted in 200 components = -0.000474823 Jy
! Clean residual min=-0.001517 max=0.001613 Jy/beam
! Clean residual mean=0.000004 rms=0.000410 Jy/beam
! Combined flux in latest and established models = 0.162698 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 72 components and 0.162698 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067091Jy  sigma=1.363345
! Fit after  self-cal, rms=0.067088Jy  sigma=1.363312
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.24792e-05 Jy
! Component: 100  -  total flux cleaned = -5.02363e-05 Jy
! Component: 150  -  total flux cleaned = -4.95686e-05 Jy
! Component: 200  -  total flux cleaned = -4.37587e-05 Jy
! Total flux subtracted in 200 components = -4.37587e-05 Jy
! Clean residual min=-0.001513 max=0.001603 Jy/beam
! Clean residual mean=0.000004 rms=0.000409 Jy/beam
! Combined flux in latest and established models = 0.162654 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 75 components and 0.162654 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067087Jy  sigma=1.363325
! Fit after  self-cal, rms=0.067085Jy  sigma=1.363305
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9046 mas, bmaj=2.068 mas, bpa=1.845 degrees
! Estimated noise=0.230697 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9046 x 2.068 at 1.845 degrees (North through East)
! Clean map  min=-0.001293  max=0.13905 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7173 mas, bmaj=1.766 mas, bpa=1.444 degrees
! Estimated noise=0.37304 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.10478 Jy
! Component: 100  -  total flux cleaned = 0.132017 Jy
! Component: 150  -  total flux cleaned = 0.14407 Jy
! Component: 200  -  total flux cleaned = 0.150365 Jy
! Total flux subtracted in 200 components = 0.150365 Jy
! Clean residual min=-0.002457 max=0.003188 Jy/beam
! Clean residual mean=0.000003 rms=0.000607 Jy/beam
! Combined flux in latest and established models = 0.150365 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.150365 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9046 mas, bmaj=2.068 mas, bpa=1.845 degrees
! Estimated noise=0.230697 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00529105 Jy
! Component: 100  -  total flux cleaned = 0.0082362 Jy
! Component: 150  -  total flux cleaned = 0.00998238 Jy
! Component: 200  -  total flux cleaned = 0.0110303 Jy
! Total flux subtracted in 200 components = 0.0110303 Jy
! Clean residual min=-0.001414 max=0.001345 Jy/beam
! Clean residual mean=0.000002 rms=0.000323 Jy/beam
! Combined flux in latest and established models = 0.161396 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 32 components and 0.161396 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.098 mas, bmaj=3.473 mas, bpa=0.02295 degrees
! Estimated noise=0.284914 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000871151 Jy
! Component: 100  -  total flux cleaned = 0.00117195 Jy
! Component: 150  -  total flux cleaned = 0.00121693 Jy
! Component: 200  -  total flux cleaned = 0.00124652 Jy
! Total flux subtracted in 200 components = 0.00124652 Jy
! Clean residual min=-0.001514 max=0.001623 Jy/beam
! Clean residual mean=0.000004 rms=0.000407 Jy/beam
! Combined flux in latest and established models = 0.162642 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.17864e-06 Jy
! Component: 100  -  total flux cleaned = 4.16948e-06 Jy
! Component: 150  -  total flux cleaned = 4.27e-06 Jy
! Component: 200  -  total flux cleaned = 1.59042e-06 Jy
! Total flux subtracted in 200 components = 1.59042e-06 Jy
! Clean residual min=-0.001514 max=0.001618 Jy/beam
! Clean residual mean=0.000004 rms=0.000407 Jy/beam
! Combined flux in latest and established models = 0.162644 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 40 components and 0.162644 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9046 mas, bmaj=2.068 mas, bpa=1.845 degrees
! Estimated noise=0.230697 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.03386e-05 Jy
! Component: 100  -  total flux cleaned = 5.02342e-05 Jy
! Component: 150  -  total flux cleaned = 4.88847e-05 Jy
! Component: 200  -  total flux cleaned = 4.91254e-05 Jy
! Total flux subtracted in 200 components = 4.91254e-05 Jy
! Clean residual min=-0.001418 max=0.001348 Jy/beam
! Clean residual mean=0.000002 rms=0.000314 Jy/beam
! Combined flux in latest and established models = 0.162693 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 57 components and 0.162693 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067087Jy  sigma=1.363308
! Fit after  self-cal, rms=0.067083Jy  sigma=1.363265
wmodel /J2120-0330_X_map.mod
! wmodel: Unable to open new model file: /J2120-0330_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J2120-0330_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9046 x 2.068 at 1.845 degrees (North through East)
! Clean map  min=-0.0012881  max=0.13931 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J2120-0330_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.139311 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000313149 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.674349 0.674349 1.3487 2.6974 5.39479 10.7896 21.5792 43.1584 86.3167
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.139 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  444.873 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J2120-0330_X_dfm.log closed on Thu May 19 22:40:59 2016