! Started logfile: /scr/pima/bg219h_uvs/J2110-0126_X_dfm.log on Thu May 19 22:40:48 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J2110-0126_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J2110-0126_X_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.786772 visibilities/baseline/integration-bin.
! Found source: J2110-0126
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 17844 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2110-0126_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006823Jy  sigma=23.106628
! Fit after  self-cal, rms=0.907115Jy  sigma=20.768261
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7041 mas, bmaj=1.691 mas, bpa=-3.018 degrees
! Estimated noise=0.396016 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0704868 Jy
! Component: 100  -  total flux cleaned = 0.0872842 Jy
! Total flux subtracted in 100 components = 0.0872842 Jy
! Clean residual min=-0.004643 max=0.010289 Jy/beam
! Clean residual mean=0.000001 rms=0.001128 Jy/beam
! Combined flux in latest and established models = 0.0872842 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0872842 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070759Jy  sigma=1.493589
! Fit after  self-cal, rms=0.070499Jy  sigma=1.489192
! Inverting map 
! Added new window around map position (1.8, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0100501 Jy
! Component: 100  -  total flux cleaned = 0.0166409 Jy
! Total flux subtracted in 100 components = 0.0166409 Jy
! Clean residual min=-0.003882 max=0.005063 Jy/beam
! Clean residual mean=0.000001 rms=0.000823 Jy/beam
! Combined flux in latest and established models = 0.103925 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 19 components and 0.103925 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068218Jy  sigma=1.425401
! Fit after  self-cal, rms=0.068097Jy  sigma=1.421735
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00585402 Jy
! Component: 100  -  total flux cleaned = 0.00993344 Jy
! Total flux subtracted in 100 components = 0.00993344 Jy
! Clean residual min=-0.003269 max=0.003873 Jy/beam
! Clean residual mean=0.000001 rms=0.000665 Jy/beam
! Combined flux in latest and established models = 0.113859 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 27 components and 0.113859 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067235Jy  sigma=1.397211
! Fit after  self-cal, rms=0.067204Jy  sigma=1.395984
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8518 mas, bmaj=1.962 mas, bpa=-1.97 degrees
! Estimated noise=0.246289 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00625819 Jy
! Component: 100  -  total flux cleaned = 0.00999077 Jy
! Component: 150  -  total flux cleaned = 0.012422 Jy
! Component: 200  -  total flux cleaned = 0.0140861 Jy
! Total flux subtracted in 200 components = 0.0140861 Jy
! Clean residual min=-0.002119 max=0.002589 Jy/beam
! Clean residual mean=0.000002 rms=0.000494 Jy/beam
! Combined flux in latest and established models = 0.127945 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 47 components and 0.127945 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066637Jy  sigma=1.379110
! Fit after  self-cal, rms=0.066616Jy  sigma=1.377928
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8518 x 1.962 at -1.97 degrees (North through East)
! Clean map  min=-0.0018729  max=0.092859 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.96     HN        1.17     KP        0.97     
!   LA        0.90     MK        1.00     NL        1.03     OV        1.04     
!   PT        0.96     SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.14     KP        0.96     
!   LA        0.95     MK        1.02     NL        0.96     OV        1.05     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.96     HN        1.11     KP        1.00     
!   LA        0.91     MK        1.01     NL        1.00     OV        1.05     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.03     HN        1.14     KP        0.97     
!   LA        0.92     MK        1.02     NL        1.00     OV        1.00     
!   PT        1.05     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.08     KP        0.99     
!   LA        0.92     MK        0.98     NL        1.01     OV        1.03     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.06     KP        0.98     
!   LA        0.92     MK        0.96     NL        1.01     OV        1.04     
!   PT        1.00     SC        0.92     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00     HN        1.06     KP        0.97     
!   LA        0.92     MK        1.02     NL        0.99     OV        1.06     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.11     KP        0.97     
!   LA        0.92     MK        0.98     NL        1.00     OV        0.99     
!   PT        1.06     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.12     KP        0.96     
!   LA        0.97     MK        0.97     NL        1.00     OV        0.97     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.99     HN        1.14     KP        0.98     
!   LA        0.91     MK        0.93     NL        1.02     OV        1.00     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.04     KP        1.00     
!   LA        0.90     MK        0.89     NL        0.98     OV        1.04     
!   PT        1.00     SC        0.95     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.96     HN        1.13     KP        0.94     
!   LA        0.91     MK        0.96     NL        1.01     OV        0.97     
!   PT        0.97     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.066616Jy  sigma=1.377928
! Fit after  self-cal, rms=0.067802Jy  sigma=1.370846
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8531 mas, bmaj=1.96 mas, bpa=-1.858 degrees
! Estimated noise=0.244667 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000751141 Jy
! Component: 100  -  total flux cleaned = 0.000719063 Jy
! Component: 150  -  total flux cleaned = 0.00070035 Jy
! Component: 200  -  total flux cleaned = 0.000682307 Jy
! Total flux subtracted in 200 components = 0.000682307 Jy
! Clean residual min=-0.001468 max=0.001448 Jy/beam
! Clean residual mean=-0.000000 rms=0.000322 Jy/beam
! Combined flux in latest and established models = 0.128627 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 61 components and 0.128627 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067778Jy  sigma=1.370124
! Fit after  self-cal, rms=0.067821Jy  sigma=1.369888
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067821Jy  sigma=1.369888
! Fit after  self-cal, rms=0.068076Jy  sigma=1.367451
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.854 mas, bmaj=1.961 mas, bpa=-1.825 degrees
! Estimated noise=0.244699 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.06854e-05 Jy
! Component: 100  -  total flux cleaned = 2.89491e-05 Jy
! Component: 150  -  total flux cleaned = 2.98767e-05 Jy
! Component: 200  -  total flux cleaned = 1.81009e-05 Jy
! Total flux subtracted in 200 components = 1.81009e-05 Jy
! Clean residual min=-0.001305 max=0.001272 Jy/beam
! Clean residual mean=0.000000 rms=0.000304 Jy/beam
! Combined flux in latest and established models = 0.128645 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 66 components and 0.128645 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068069Jy  sigma=1.367259
! Fit after  self-cal, rms=0.068074Jy  sigma=1.367166
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.70849e-05 Jy
! Component: 100  -  total flux cleaned = 5.47186e-05 Jy
! Component: 150  -  total flux cleaned = 3.33184e-05 Jy
! Component: 200  -  total flux cleaned = 2.36668e-05 Jy
! Total flux subtracted in 200 components = 2.36668e-05 Jy
! Clean residual min=-0.001289 max=0.001293 Jy/beam
! Clean residual mean=0.000000 rms=0.000302 Jy/beam
! Combined flux in latest and established models = 0.128669 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 69 components and 0.128669 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068070Jy  sigma=1.367082
! Fit after  self-cal, rms=0.068069Jy  sigma=1.367068
! Inverting map 
! Added new window around map position (39.2, -6.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000945605 Jy
! Component: 100  -  total flux cleaned = 0.00101197 Jy
! Component: 150  -  total flux cleaned = 0.00112849 Jy
! Component: 200  -  total flux cleaned = 0.00114557 Jy
! Total flux subtracted in 200 components = 0.00114557 Jy
! Clean residual min=-0.001283 max=0.001169 Jy/beam
! Clean residual mean=0.000000 rms=0.000292 Jy/beam
! Combined flux in latest and established models = 0.129814 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 85 components and 0.129814 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068045Jy  sigma=1.366608
! Fit after  self-cal, rms=0.068043Jy  sigma=1.366560
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068043Jy  sigma=1.366560
! Fit after  self-cal, rms=0.067970Jy  sigma=1.366523
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8546 mas, bmaj=1.961 mas, bpa=-1.79 degrees
! Estimated noise=0.244423 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000362043 Jy
! Component: 100  -  total flux cleaned = 0.000362369 Jy
! Component: 150  -  total flux cleaned = 0.000347457 Jy
! Component: 200  -  total flux cleaned = 0.000347913 Jy
! Total flux subtracted in 200 components = 0.000347913 Jy
! Clean residual min=-0.001274 max=0.001153 Jy/beam
! Clean residual mean=0.000000 rms=0.000289 Jy/beam
! Combined flux in latest and established models = 0.130162 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 89 components and 0.130162 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067962Jy  sigma=1.366374
! Fit after  self-cal, rms=0.067961Jy  sigma=1.366253
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000111822 Jy
! Component: 100  -  total flux cleaned = 9.86339e-05 Jy
! Component: 150  -  total flux cleaned = 8.58788e-05 Jy
! Component: 200  -  total flux cleaned = 8.55686e-05 Jy
! Total flux subtracted in 200 components = 8.55686e-05 Jy
! Clean residual min=-0.001258 max=0.001155 Jy/beam
! Clean residual mean=0.000000 rms=0.000288 Jy/beam
! Combined flux in latest and established models = 0.130248 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 93 components and 0.130248 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067956Jy  sigma=1.366161
! Fit after  self-cal, rms=0.067956Jy  sigma=1.366158
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067956Jy  sigma=1.366158
! Fit after  self-cal, rms=0.067918Jy  sigma=1.366143
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.147 mas, bmaj=3.22 mas, bpa=-1.408 degrees
! Estimated noise=0.305847 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.96445e-05 Jy
! Component: 100  -  total flux cleaned = -3.83487e-05 Jy
! Component: 150  -  total flux cleaned = -2.87173e-05 Jy
! Component: 200  -  total flux cleaned = -2.89504e-05 Jy
! Total flux subtracted in 200 components = -2.89504e-05 Jy
! Clean residual min=-0.001386 max=0.001372 Jy/beam
! Clean residual mean=0.000000 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 0.130219 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 104 components and 0.130219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067916Jy  sigma=1.366099
! Fit after  self-cal, rms=0.067916Jy  sigma=1.366095
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.05799e-06 Jy
! Component: 100  -  total flux cleaned = -4.15165e-06 Jy
! Component: 150  -  total flux cleaned = -4.1681e-06 Jy
! Component: 200  -  total flux cleaned = 2.78971e-06 Jy
! Total flux subtracted in 200 components = 2.78971e-06 Jy
! Clean residual min=-0.001383 max=0.001369 Jy/beam
! Clean residual mean=0.000000 rms=0.000360 Jy/beam
! Combined flux in latest and established models = 0.130222 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 106 components and 0.130222 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067915Jy  sigma=1.366079
! Fit after  self-cal, rms=0.067915Jy  sigma=1.366074
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8549 mas, bmaj=1.962 mas, bpa=-1.77 degrees
! Estimated noise=0.2443 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8549 x 1.962 at -1.77 degrees (North through East)
! Clean map  min=-0.0012017  max=0.091791 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7053 mas, bmaj=1.69 mas, bpa=-2.866 degrees
! Estimated noise=0.3954 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.070016 Jy
! Component: 100  -  total flux cleaned = 0.0888141 Jy
! Component: 150  -  total flux cleaned = 0.0991956 Jy
! Component: 200  -  total flux cleaned = 0.106442 Jy
! Total flux subtracted in 200 components = 0.106442 Jy
! Clean residual min=-0.003264 max=0.004075 Jy/beam
! Clean residual mean=0.000001 rms=0.000702 Jy/beam
! Combined flux in latest and established models = 0.106442 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.106442 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8549 mas, bmaj=1.962 mas, bpa=-1.77 degrees
! Estimated noise=0.2443 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00847472 Jy
! Component: 100  -  total flux cleaned = 0.0134963 Jy
! Component: 150  -  total flux cleaned = 0.016581 Jy
! Component: 200  -  total flux cleaned = 0.0186105 Jy
! Total flux subtracted in 200 components = 0.0186105 Jy
! Clean residual min=-0.001496 max=0.001428 Jy/beam
! Clean residual mean=0.000001 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.125053 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 32 components and 0.125053 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.147 mas, bmaj=3.22 mas, bpa=-1.408 degrees
! Estimated noise=0.305847 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00198088 Jy
! Component: 100  -  total flux cleaned = 0.00302363 Jy
! Component: 150  -  total flux cleaned = 0.0037101 Jy
! Component: 200  -  total flux cleaned = 0.0041802 Jy
! Total flux subtracted in 200 components = 0.0041802 Jy
! Clean residual min=-0.001440 max=0.001313 Jy/beam
! Clean residual mean=0.000001 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.129233 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000135228 Jy
! Component: 100  -  total flux cleaned = 0.000224642 Jy
! Component: 150  -  total flux cleaned = 0.000305722 Jy
! Component: 200  -  total flux cleaned = 0.000367502 Jy
! Total flux subtracted in 200 components = 0.000367502 Jy
! Clean residual min=-0.001417 max=0.001324 Jy/beam
! Clean residual mean=0.000001 rms=0.000368 Jy/beam
! Combined flux in latest and established models = 0.129601 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 67 components and 0.129601 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8549 mas, bmaj=1.962 mas, bpa=-1.77 degrees
! Estimated noise=0.2443 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.95755e-06 Jy
! Component: 100  -  total flux cleaned = 3.60999e-05 Jy
! Component: 150  -  total flux cleaned = 5.84436e-05 Jy
! Component: 200  -  total flux cleaned = 5.8985e-05 Jy
! Total flux subtracted in 200 components = 5.8985e-05 Jy
! Clean residual min=-0.001285 max=0.001163 Jy/beam
! Clean residual mean=0.000000 rms=0.000296 Jy/beam
! Combined flux in latest and established models = 0.12966 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 81 components and 0.12966 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067941Jy  sigma=1.366641
! Fit after  self-cal, rms=0.067941Jy  sigma=1.366559
wmodel /J2110-0126_X_map.mod
! wmodel: Unable to open new model file: /J2110-0126_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J2110-0126_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8549 x 1.962 at -1.77 degrees (North through East)
! Clean map  min=-0.0012445  max=0.09207 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J2110-0126_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0920699 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000293122 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.955107 0.955107 1.91021 3.82043 7.64085 15.2817 30.5634 61.1268
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.092 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  314.101 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J2110-0126_X_dfm.log closed on Thu May 19 22:40:51 2016