! Started logfile: /scr/pima/bg219h_uvs/J2108+1430_X_dfm.log on Thu May 19 22:40:41 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J2108+1430_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J2108+1430_X_uva.fits
! AN table 1: 7 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.847619 visibilities/baseline/integration-bin.
! Found source: J2108+1430
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 3204 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2108+1430_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.062478Jy  sigma=20.454427
! Fit after  self-cal, rms=0.688172Jy  sigma=12.917165
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6735 mas, bmaj=1.881 mas, bpa=6.439 degrees
! Estimated noise=1.14303 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.246274 Jy
! Component: 100  -  total flux cleaned = 0.307266 Jy
! Total flux subtracted in 100 components = 0.307266 Jy
! Clean residual min=-0.013867 max=0.024870 Jy/beam
! Clean residual mean=-0.000005 rms=0.003748 Jy/beam
! Combined flux in latest and established models = 0.307266 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.307266 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.102151Jy  sigma=1.797656
! Fit after  self-cal, rms=0.102103Jy  sigma=1.796702
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0264921 Jy
! Component: 100  -  total flux cleaned = 0.0395706 Jy
! Total flux subtracted in 100 components = 0.0395706 Jy
! Clean residual min=-0.010632 max=0.015608 Jy/beam
! Clean residual mean=-0.000003 rms=0.002497 Jy/beam
! Combined flux in latest and established models = 0.346837 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 10 components and 0.346837 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.095324Jy  sigma=1.592250
! Fit after  self-cal, rms=0.095265Jy  sigma=1.591041
! Inverting map 
! Added new window around map position (-7.8, 9).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0132724 Jy
! Component: 100  -  total flux cleaned = 0.0202254 Jy
! Total flux subtracted in 100 components = 0.0202254 Jy
! Clean residual min=-0.008566 max=0.011558 Jy/beam
! Clean residual mean=-0.000002 rms=0.002092 Jy/beam
! Combined flux in latest and established models = 0.367062 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 22 components and 0.367062 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.093383Jy  sigma=1.546649
! Fit after  self-cal, rms=0.093137Jy  sigma=1.539594
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8229 mas, bmaj=2.106 mas, bpa=5.527 degrees
! Estimated noise=0.754836 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.4, 8.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.011027 Jy
! Component: 100  -  total flux cleaned = 0.0161988 Jy
! Component: 150  -  total flux cleaned = 0.0188112 Jy
! Component: 200  -  total flux cleaned = 0.0199106 Jy
! Total flux subtracted in 200 components = 0.0199106 Jy
! Clean residual min=-0.006408 max=0.008328 Jy/beam
! Clean residual mean=-0.000001 rms=0.001555 Jy/beam
! Combined flux in latest and established models = 0.386973 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 47 components and 0.386973 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091296Jy  sigma=1.506526
! Fit after  self-cal, rms=0.091252Jy  sigma=1.505421
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8229 x 2.106 at 5.527 degrees (North through East)
! Clean map  min=-0.005718  max=0.31588 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.15     KP        0.99     
!   LA        1.01     MK        0.97     NL        0.99     OV        0.99     
!   PT        0.94     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.03     HN        1.10     KP        0.99     
!   LA        1.02     MK        1.00     NL        0.99     OV        0.99     
!   PT        0.96     SC        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.13     KP        0.99     
!   LA        0.96     MK        1.00     NL        0.98     OV        1.02     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.09     KP        0.97     
!   LA        0.94     MK        0.99     NL        0.98     OV        1.03     
!   PT        0.98     SC        0.95     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.08     KP        1.00     
!   LA        0.99     MK        1.01     NL        1.00     OV        0.98     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.10     KP        0.99     
!   LA        0.98     MK        1.04     NL        1.02     OV        1.01     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00     HN        1.13     KP        0.98     
!   LA        1.00     MK        1.00     NL        0.98     OV        0.99     
!   PT        0.98     SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.12     KP        1.00     
!   LA        0.96     MK        0.98     NL        0.98     OV        1.03     
!   PT        0.97     SC        0.97     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        1.17     KP        1.00     
!   LA        0.97     MK        1.01     NL        1.03     OV        1.01     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.06     KP        1.02     
!   LA        0.97     MK        1.00     NL        1.01     OV        0.97     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.99     HN        1.09     KP        1.01     
!   LA        0.99     MK        1.00     NL        0.99     OV        0.99     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.12     KP        1.03     
!   LA        0.98     MK        1.02     NL        1.03     OV        1.01     
!   PT        0.96     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.091252Jy  sigma=1.505421
! Fit after  self-cal, rms=0.092156Jy  sigma=1.479531
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8281 mas, bmaj=2.115 mas, bpa=5.961 degrees
! Estimated noise=0.754878 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4.2, -15.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0030129 Jy
! Component: 100  -  total flux cleaned = 0.00228558 Jy
! Component: 150  -  total flux cleaned = 0.00140294 Jy
! Component: 200  -  total flux cleaned = 0.000977559 Jy
! Total flux subtracted in 200 components = 0.000977559 Jy
! Clean residual min=-0.004482 max=0.004531 Jy/beam
! Clean residual mean=-0.000001 rms=0.000993 Jy/beam
! Combined flux in latest and established models = 0.38795 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 74 components and 0.38795 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091620Jy  sigma=1.474519
! Fit after  self-cal, rms=0.091636Jy  sigma=1.474298
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091636Jy  sigma=1.474298
! Fit after  self-cal, rms=0.091241Jy  sigma=1.473447
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8292 mas, bmaj=2.117 mas, bpa=5.943 degrees
! Estimated noise=0.750133 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00242242 Jy
! Component: 100  -  total flux cleaned = -0.002928 Jy
! Component: 150  -  total flux cleaned = -0.00322819 Jy
! Component: 200  -  total flux cleaned = -0.00350641 Jy
! Total flux subtracted in 200 components = -0.00350641 Jy
! Clean residual min=-0.004150 max=0.004328 Jy/beam
! Clean residual mean=-0.000001 rms=0.000945 Jy/beam
! Combined flux in latest and established models = 0.384444 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 85 components and 0.384444 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090974Jy  sigma=1.472514
! Fit after  self-cal, rms=0.090970Jy  sigma=1.472470
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (11.2, -45).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00339429 Jy
! Component: 100  -  total flux cleaned = 0.00380295 Jy
! Component: 150  -  total flux cleaned = 0.00436364 Jy
! Component: 200  -  total flux cleaned = 0.00459535 Jy
! Total flux subtracted in 200 components = 0.00459535 Jy
! Clean residual min=-0.003665 max=0.003414 Jy/beam
! Clean residual mean=-0.000001 rms=0.000856 Jy/beam
! Combined flux in latest and established models = 0.389039 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 100 components and 0.389039 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090734Jy  sigma=1.470329
! Fit after  self-cal, rms=0.090725Jy  sigma=1.470164
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090725Jy  sigma=1.470164
! Fit after  self-cal, rms=0.090037Jy  sigma=1.468998
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8293 mas, bmaj=2.118 mas, bpa=5.895 degrees
! Estimated noise=0.743812 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00189555 Jy
! Component: 100  -  total flux cleaned = -0.00171163 Jy
! Component: 150  -  total flux cleaned = -0.00181899 Jy
! Component: 200  -  total flux cleaned = -0.00176478 Jy
! Total flux subtracted in 200 components = -0.00176478 Jy
! Clean residual min=-0.003509 max=0.003456 Jy/beam
! Clean residual mean=-0.000001 rms=0.000826 Jy/beam
! Combined flux in latest and established models = 0.387275 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 108 components and 0.387275 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.089813Jy  sigma=1.469107
! Fit after  self-cal, rms=0.089810Jy  sigma=1.469082
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.86717e-05 Jy
! Component: 100  -  total flux cleaned = 0.000242494 Jy
! Component: 150  -  total flux cleaned = 0.000242327 Jy
! Component: 200  -  total flux cleaned = 0.000329684 Jy
! Total flux subtracted in 200 components = 0.000329684 Jy
! Clean residual min=-0.003502 max=0.003345 Jy/beam
! Clean residual mean=-0.000001 rms=0.000803 Jy/beam
! Combined flux in latest and established models = 0.387604 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 118 components and 0.387604 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.089741Jy  sigma=1.468660
! Fit after  self-cal, rms=0.089741Jy  sigma=1.468637
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.089741Jy  sigma=1.468637
! Fit after  self-cal, rms=0.089087Jy  sigma=1.467579
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.088 mas, bmaj=3.203 mas, bpa=-2.277 degrees
! Estimated noise=0.948599 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00031621 Jy
! Component: 100  -  total flux cleaned = 0.000951402 Jy
! Component: 150  -  total flux cleaned = 0.00143878 Jy
! Component: 200  -  total flux cleaned = 0.00170016 Jy
! Total flux subtracted in 200 components = 0.00170016 Jy
! Clean residual min=-0.003739 max=0.003757 Jy/beam
! Clean residual mean=-0.000002 rms=0.000990 Jy/beam
! Combined flux in latest and established models = 0.389304 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 131 components and 0.389304 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088955Jy  sigma=1.468514
! Fit after  self-cal, rms=0.088949Jy  sigma=1.468389
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000313365 Jy
! Component: 100  -  total flux cleaned = 9.427e-06 Jy
! Component: 150  -  total flux cleaned = 0.000143356 Jy
! Component: 200  -  total flux cleaned = 0.000362639 Jy
! Total flux subtracted in 200 components = 0.000362639 Jy
! Clean residual min=-0.003615 max=0.003649 Jy/beam
! Clean residual mean=-0.000002 rms=0.000952 Jy/beam
! Combined flux in latest and established models = 0.389667 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 142 components and 0.389667 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088931Jy  sigma=1.468614
! Fit after  self-cal, rms=0.088927Jy  sigma=1.468575
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8292 mas, bmaj=2.118 mas, bpa=5.86 degrees
! Estimated noise=0.737463 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8292 x 2.118 at 5.86 degrees (North through East)
! Clean map  min=-0.0049868  max=0.31179 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6757 mas, bmaj=1.891 mas, bpa=6.78 degrees
! Estimated noise=1.12185 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.241535 Jy
! Component: 100  -  total flux cleaned = 0.300309 Jy
! Component: 150  -  total flux cleaned = 0.326125 Jy
! Component: 200  -  total flux cleaned = 0.340287 Jy
! Total flux subtracted in 200 components = 0.340287 Jy
! Clean residual min=-0.008943 max=0.008299 Jy/beam
! Clean residual mean=-0.000002 rms=0.001991 Jy/beam
! Combined flux in latest and established models = 0.340287 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.340287 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8292 mas, bmaj=2.118 mas, bpa=5.86 degrees
! Estimated noise=0.737463 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0115329 Jy
! Component: 100  -  total flux cleaned = 0.0193061 Jy
! Component: 150  -  total flux cleaned = 0.0255195 Jy
! Component: 200  -  total flux cleaned = 0.029636 Jy
! Total flux subtracted in 200 components = 0.029636 Jy
! Clean residual min=-0.005818 max=0.005388 Jy/beam
! Clean residual mean=-0.000002 rms=0.001232 Jy/beam
! Combined flux in latest and established models = 0.369923 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 28 components and 0.369923 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.088 mas, bmaj=3.203 mas, bpa=-2.277 degrees
! Estimated noise=0.948599 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00575956 Jy
! Component: 100  -  total flux cleaned = 0.00881489 Jy
! Component: 150  -  total flux cleaned = 0.0109637 Jy
! Component: 200  -  total flux cleaned = 0.0124725 Jy
! Total flux subtracted in 200 components = 0.0124725 Jy
! Clean residual min=-0.004539 max=0.004409 Jy/beam
! Clean residual mean=-0.000003 rms=0.001260 Jy/beam
! Combined flux in latest and established models = 0.382395 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00114094 Jy
! Component: 100  -  total flux cleaned = 0.00222622 Jy
! Component: 150  -  total flux cleaned = 0.00303893 Jy
! Component: 200  -  total flux cleaned = 0.00390242 Jy
! Total flux subtracted in 200 components = 0.00390242 Jy
! Clean residual min=-0.003961 max=0.003875 Jy/beam
! Clean residual mean=-0.000003 rms=0.001092 Jy/beam
! Combined flux in latest and established models = 0.386298 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 59 components and 0.386298 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8292 mas, bmaj=2.118 mas, bpa=5.86 degrees
! Estimated noise=0.737463 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000491728 Jy
! Component: 100  -  total flux cleaned = -0.000367272 Jy
! Component: 150  -  total flux cleaned = -0.000577744 Jy
! Component: 200  -  total flux cleaned = -0.000666846 Jy
! Total flux subtracted in 200 components = -0.000666846 Jy
! Clean residual min=-0.003791 max=0.003580 Jy/beam
! Clean residual mean=-0.000001 rms=0.000841 Jy/beam
! Combined flux in latest and established models = 0.385631 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 79 components and 0.385631 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.089207Jy  sigma=1.471870
! Fit after  self-cal, rms=0.089170Jy  sigma=1.471353
wmodel /J2108+1430_X_map.mod
! wmodel: Unable to open new model file: /J2108+1430_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J2108+1430_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8292 x 2.118 at 5.86 degrees (North through East)
! Clean map  min=-0.0031961  max=0.30991 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J2108+1430_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.309914 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000825797 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.799379 0.799379 1.59876 3.19752 6.39504 12.7901 25.5801 51.1603
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0024 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.309 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  375.291 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J2108+1430_X_dfm.log closed on Thu May 19 22:40:44 2016