! Started logfile: /scr/pima/bg219h_uvs/J1918+5520_X_uvs.log on Thu Apr  7 12:19:00 2016
obs /scr/pima/bg219h_uvs/J1918+5520_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1918+5520_X_uva.fits
! AN table 1: 56 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.444841 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1918+5520
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 13452 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219h_uvs/J1918+5520_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 263 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 263 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 263 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 263 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 263 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 263 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 263 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.040382Jy  sigma=23.561770
! Fit after  self-cal, rms=0.739012Jy  sigma=16.411505
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7559 mas, bmaj=1.014 mas, bpa=-2.065 degrees
! Estimated noise=0.692742 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.202437 Jy
! Component: 100  -  total flux cleaned = 0.281447 Jy
! Total flux subtracted in 100 components = 0.281447 Jy
! Clean residual min=-0.017081 max=0.036512 Jy/beam
! Clean residual mean=0.000112 rms=0.004856 Jy/beam
! Combined flux in latest and established models = 0.281447 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.281447 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.122851Jy  sigma=2.736722
! Fit after  self-cal, rms=0.120437Jy  sigma=2.706641
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0465801 Jy
! Component: 100  -  total flux cleaned = 0.0734265 Jy
! Total flux subtracted in 100 components = 0.0734265 Jy
! Clean residual min=-0.011363 max=0.016576 Jy/beam
! Clean residual mean=0.000056 rms=0.002857 Jy/beam
! Combined flux in latest and established models = 0.354873 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 21 components and 0.354873 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.095478Jy  sigma=1.984012
! Fit after  self-cal, rms=0.094062Jy  sigma=1.963848
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0202162 Jy
! Component: 100  -  total flux cleaned = 0.0317038 Jy
! Total flux subtracted in 100 components = 0.0317038 Jy
! Clean residual min=-0.008762 max=0.011739 Jy/beam
! Clean residual mean=0.000033 rms=0.002210 Jy/beam
! Combined flux in latest and established models = 0.386577 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 24 components and 0.386577 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.088475Jy  sigma=1.775022
! Fit after  self-cal, rms=0.088107Jy  sigma=1.768582
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9232 mas, bmaj=1.198 mas, bpa=-2.029 degrees
! Estimated noise=0.410227 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0149512 Jy
! Component: 100  -  total flux cleaned = 0.0231819 Jy
! Component: 150  -  total flux cleaned = 0.0282906 Jy
! Component: 200  -  total flux cleaned = 0.0306691 Jy
! Total flux subtracted in 200 components = 0.0306691 Jy
! Clean residual min=-0.007983 max=0.008647 Jy/beam
! Clean residual mean=0.000026 rms=0.001763 Jy/beam
! Combined flux in latest and established models = 0.417246 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 32 components and 0.417246 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.086237Jy  sigma=1.689352
! Fit after  self-cal, rms=0.086195Jy  sigma=1.688178
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9232 x 1.198 at -2.029 degrees (North through East)
! Clean map  min=-0.0074978  max=0.24859 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 57 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 57 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 57 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 57 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 57 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 7.
!  A total of 57 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 8.
!  A total of 57 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.086195Jy  sigma=1.688178
! Fit after  self-cal, rms=0.085209Jy  sigma=1.720323
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9748 mas, bmaj=1.267 mas, bpa=-5.057 degrees
! Estimated noise=0.412548 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.4, -0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00321383 Jy
! Component: 100  -  total flux cleaned = 0.00342323 Jy
! Component: 150  -  total flux cleaned = 0.00397347 Jy
! Component: 200  -  total flux cleaned = 0.00429763 Jy
! Total flux subtracted in 200 components = 0.00429763 Jy
! Clean residual min=-0.007500 max=0.007870 Jy/beam
! Clean residual mean=0.000020 rms=0.001614 Jy/beam
! Combined flux in latest and established models = 0.421544 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 46 components and 0.421544 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.083717Jy  sigma=1.697833
! Fit after  self-cal, rms=0.083606Jy  sigma=1.694813
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.083606Jy  sigma=1.694813
! Fit after  self-cal, rms=0.083361Jy  sigma=1.656556
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9748 mas, bmaj=1.278 mas, bpa=-4.163 degrees
! Estimated noise=0.411754 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00493681 Jy
! Component: 100  -  total flux cleaned = -0.00594162 Jy
! Component: 150  -  total flux cleaned = -0.00641108 Jy
! Component: 200  -  total flux cleaned = -0.0064111 Jy
! Total flux subtracted in 200 components = -0.0064111 Jy
! Clean residual min=-0.005018 max=0.005525 Jy/beam
! Clean residual mean=0.000026 rms=0.001158 Jy/beam
! Combined flux in latest and established models = 0.415133 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 59 components and 0.415133 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.082658Jy  sigma=1.649671
! Fit after  self-cal, rms=0.082675Jy  sigma=1.649309
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.8, 16).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00187553 Jy
! Component: 100  -  total flux cleaned = 0.00159925 Jy
! Component: 150  -  total flux cleaned = 0.00138827 Jy
! Component: 200  -  total flux cleaned = 0.00129782 Jy
! Total flux subtracted in 200 components = 0.00129782 Jy
! Clean residual min=-0.004427 max=0.004522 Jy/beam
! Clean residual mean=0.000025 rms=0.001088 Jy/beam
! Combined flux in latest and established models = 0.41643 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 67 components and 0.41643 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.082070Jy  sigma=1.642197
! Fit after  self-cal, rms=0.082049Jy  sigma=1.641738
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.082049Jy  sigma=1.641738
! Fit after  self-cal, rms=0.081930Jy  sigma=1.640432
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9748 mas, bmaj=1.281 mas, bpa=-4.225 degrees
! Estimated noise=0.410113 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00093924 Jy
! Component: 100  -  total flux cleaned = -0.000854913 Jy
! Component: 150  -  total flux cleaned = -0.000854218 Jy
! Component: 200  -  total flux cleaned = -0.000855568 Jy
! Total flux subtracted in 200 components = -0.000855568 Jy
! Clean residual min=-0.004194 max=0.004673 Jy/beam
! Clean residual mean=0.000026 rms=0.001052 Jy/beam
! Combined flux in latest and established models = 0.415575 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 74 components and 0.415575 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.081619Jy  sigma=1.638216
! Fit after  self-cal, rms=0.081617Jy  sigma=1.638094
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (6.4, -0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00114833 Jy
! Component: 100  -  total flux cleaned = 0.00138223 Jy
! Component: 150  -  total flux cleaned = 0.00180341 Jy
! Component: 200  -  total flux cleaned = 0.00234853 Jy
! Total flux subtracted in 200 components = 0.00234853 Jy
! Clean residual min=-0.003996 max=0.003851 Jy/beam
! Clean residual mean=0.000024 rms=0.000977 Jy/beam
! Combined flux in latest and established models = 0.417923 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 94 components and 0.417923 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.081027Jy  sigma=1.631356
! Fit after  self-cal, rms=0.081022Jy  sigma=1.630925
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.081022Jy  sigma=1.630925
! Fit after  self-cal, rms=0.081049Jy  sigma=1.628019
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.193 mas, bmaj=2.468 mas, bpa=16.4 degrees
! Estimated noise=0.52321 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000361391 Jy
! Component: 100  -  total flux cleaned = 0.000201256 Jy
! Component: 150  -  total flux cleaned = 0.000202904 Jy
! Component: 200  -  total flux cleaned = 0.00020376 Jy
! Total flux subtracted in 200 components = 0.00020376 Jy
! Clean residual min=-0.004368 max=0.004258 Jy/beam
! Clean residual mean=0.000043 rms=0.001247 Jy/beam
! Combined flux in latest and established models = 0.418127 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 105 components and 0.418127 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.080982Jy  sigma=1.627485
! Fit after  self-cal, rms=0.080986Jy  sigma=1.627381
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000231838 Jy
! Component: 100  -  total flux cleaned = 0.000230938 Jy
! Component: 150  -  total flux cleaned = 0.000230955 Jy
! Component: 200  -  total flux cleaned = 0.000231212 Jy
! Total flux subtracted in 200 components = 0.000231212 Jy
! Clean residual min=-0.004373 max=0.004264 Jy/beam
! Clean residual mean=0.000043 rms=0.001241 Jy/beam
! Combined flux in latest and established models = 0.418358 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 113 components and 0.418358 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.080931Jy  sigma=1.627127
! Fit after  self-cal, rms=0.080931Jy  sigma=1.627080
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9747 mas, bmaj=1.281 mas, bpa=-4.44 degrees
! Estimated noise=0.409027 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9747 x 1.281 at -4.44 degrees (North through East)
! Clean map  min=-0.0058338  max=0.25514 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7692 mas, bmaj=1.04 mas, bpa=-2.98 degrees
! Estimated noise=0.707835 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.207285 Jy
! Component: 100  -  total flux cleaned = 0.287719 Jy
! Component: 150  -  total flux cleaned = 0.328156 Jy
! Component: 200  -  total flux cleaned = 0.352657 Jy
! Total flux subtracted in 200 components = 0.352657 Jy
! Clean residual min=-0.008716 max=0.013835 Jy/beam
! Clean residual mean=0.000055 rms=0.002373 Jy/beam
! Combined flux in latest and established models = 0.352657 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.352657 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9747 mas, bmaj=1.281 mas, bpa=-4.44 degrees
! Estimated noise=0.409027 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0247909 Jy
! Component: 100  -  total flux cleaned = 0.0385885 Jy
! Component: 150  -  total flux cleaned = 0.0474127 Jy
! Component: 200  -  total flux cleaned = 0.0527056 Jy
! Total flux subtracted in 200 components = 0.0527056 Jy
! Clean residual min=-0.005038 max=0.006404 Jy/beam
! Clean residual mean=0.000037 rms=0.001294 Jy/beam
! Combined flux in latest and established models = 0.405362 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 40 components and 0.405362 Jy
! Inverting map 
! Added new window around map position (1.2, -0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00636321 Jy
! Component: 100  -  total flux cleaned = 0.00750309 Jy
! Component: 150  -  total flux cleaned = 0.00833717 Jy
! Component: 200  -  total flux cleaned = 0.00893524 Jy
! Total flux subtracted in 200 components = 0.00893524 Jy
! Clean residual min=-0.004054 max=0.004943 Jy/beam
! Clean residual mean=0.000023 rms=0.001064 Jy/beam
! Combined flux in latest and established models = 0.414298 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 69 components and 0.414298 Jy
! Inverting map 
! Added new window around map position (-3.6, 0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00240041 Jy
! Component: 100  -  total flux cleaned = 0.00281264 Jy
! Component: 150  -  total flux cleaned = 0.00318911 Jy
! Component: 200  -  total flux cleaned = 0.00330832 Jy
! Total flux subtracted in 200 components = 0.00330832 Jy
! Clean residual min=-0.003671 max=0.004260 Jy/beam
! Clean residual mean=0.000019 rms=0.000960 Jy/beam
! Combined flux in latest and established models = 0.417606 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 84 components and 0.417606 Jy
! Inverting map 
! Added new window around map position (-1.2, -16.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00270295 Jy
! Component: 100  -  total flux cleaned = 0.00358335 Jy
! Component: 150  -  total flux cleaned = 0.0040836 Jy
! Component: 200  -  total flux cleaned = 0.00417482 Jy
! Total flux subtracted in 200 components = 0.00417482 Jy
! Clean residual min=-0.003568 max=0.003656 Jy/beam
! Clean residual mean=0.000014 rms=0.000885 Jy/beam
! Combined flux in latest and established models = 0.421781 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 101 components and 0.421781 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.193 mas, bmaj=2.468 mas, bpa=16.4 degrees
! Estimated noise=0.52321 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000123372 Jy
! Component: 100  -  total flux cleaned = 0.000602844 Jy
! Component: 150  -  total flux cleaned = 0.000957493 Jy
! Component: 200  -  total flux cleaned = 0.00121734 Jy
! Total flux subtracted in 200 components = 0.00121734 Jy
! Clean residual min=-0.003877 max=0.004213 Jy/beam
! Clean residual mean=0.000030 rms=0.001199 Jy/beam
! Combined flux in latest and established models = 0.422998 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00018292 Jy
! Component: 100  -  total flux cleaned = 0.000412187 Jy
! Component: 150  -  total flux cleaned = 0.000628271 Jy
! Component: 200  -  total flux cleaned = 0.000679205 Jy
! Total flux subtracted in 200 components = 0.000679205 Jy
! Clean residual min=-0.003818 max=0.004293 Jy/beam
! Clean residual mean=0.000028 rms=0.001169 Jy/beam
! Combined flux in latest and established models = 0.423677 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 127 components and 0.423677 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9747 mas, bmaj=1.281 mas, bpa=-4.44 degrees
! Estimated noise=0.409027 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000911508 Jy
! Component: 100  -  total flux cleaned = -0.000910146 Jy
! Component: 150  -  total flux cleaned = -0.00112937 Jy
! Component: 200  -  total flux cleaned = -0.00140722 Jy
! Total flux subtracted in 200 components = -0.00140722 Jy
! Clean residual min=-0.003181 max=0.003356 Jy/beam
! Clean residual mean=0.000013 rms=0.000804 Jy/beam
! Combined flux in latest and established models = 0.42227 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 148 components and 0.42227 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.080498Jy  sigma=1.619774
! Fit after  self-cal, rms=0.080453Jy  sigma=1.618811
wmodel /scr/pima/bg219h_uvs/J1918+5520_X_map.mod
! Writing 148 model components to file: /scr/pima/bg219h_uvs/J1918+5520_X_map.mod
wobs /scr/pima/bg219h_uvs/J1918+5520_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219h_uvs/J1918+5520_X_uvs.fits
wwins /scr/pima/bg219h_uvs/J1918+5520_X_map.win
! wwins: Wrote 7 windows to /scr/pima/bg219h_uvs/J1918+5520_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000134131 Jy
! Component: 100  -  total flux cleaned = -2.82488e-05 Jy
! Component: 150  -  total flux cleaned = -0.00033969 Jy
! Component: 200  -  total flux cleaned = -0.000441083 Jy
! Component: 250  -  total flux cleaned = -0.000538683 Jy
! Component: 300  -  total flux cleaned = -0.000678092 Jy
! Component: 350  -  total flux cleaned = -0.000900557 Jy
! Component: 400  -  total flux cleaned = -0.00102934 Jy
! Component: 450  -  total flux cleaned = -0.00115575 Jy
! Component: 500  -  total flux cleaned = -0.00136245 Jy
! Component: 550  -  total flux cleaned = -0.00144356 Jy
! Component: 600  -  total flux cleaned = -0.00164153 Jy
! Component: 650  -  total flux cleaned = -0.00175781 Jy
! Component: 700  -  total flux cleaned = -0.00172046 Jy
! Component: 750  -  total flux cleaned = -0.00186951 Jy
! Component: 800  -  total flux cleaned = -0.0018331 Jy
! Component: 850  -  total flux cleaned = -0.00179831 Jy
! Component: 900  -  total flux cleaned = -0.00197411 Jy
! Component: 950  -  total flux cleaned = -0.00207721 Jy
! Component: 1000  -  total flux cleaned = -0.00207763 Jy
! Component: 1050  -  total flux cleaned = -0.00217806 Jy
! Component: 1100  -  total flux cleaned = -0.00227657 Jy
! Component: 1150  -  total flux cleaned = -0.00240564 Jy
! Component: 1200  -  total flux cleaned = -0.00243685 Jy
! Component: 1250  -  total flux cleaned = -0.00246802 Jy
! Component: 1300  -  total flux cleaned = -0.00252993 Jy
! Component: 1350  -  total flux cleaned = -0.00252953 Jy
! Component: 1400  -  total flux cleaned = -0.00252865 Jy
! Component: 1450  -  total flux cleaned = -0.0025578 Jy
! Component: 1500  -  total flux cleaned = -0.00246988 Jy
! Component: 1550  -  total flux cleaned = -0.00252734 Jy
! Component: 1600  -  total flux cleaned = -0.00244238 Jy
! Component: 1650  -  total flux cleaned = -0.00247078 Jy
! Component: 1700  -  total flux cleaned = -0.00255394 Jy
! Component: 1750  -  total flux cleaned = -0.00252629 Jy
! Component: 1800  -  total flux cleaned = -0.00252641 Jy
! Component: 1850  -  total flux cleaned = -0.00257956 Jy
! Component: 1900  -  total flux cleaned = -0.00255269 Jy
! Component: 1950  -  total flux cleaned = -0.00255258 Jy
! Component: 2000  -  total flux cleaned = -0.00265645 Jy
! Component: 2050  -  total flux cleaned = -0.00268204 Jy
! Component: 2100  -  total flux cleaned = -0.0027581 Jy
! Component: 2150  -  total flux cleaned = -0.00278313 Jy
! Component: 2200  -  total flux cleaned = -0.00290749 Jy
! Component: 2250  -  total flux cleaned = -0.00290708 Jy
! Component: 2300  -  total flux cleaned = -0.0030042 Jy
! Component: 2350  -  total flux cleaned = -0.00310019 Jy
! Component: 2400  -  total flux cleaned = -0.00319548 Jy
! Component: 2450  -  total flux cleaned = -0.00324286 Jy
! Component: 2500  -  total flux cleaned = -0.0033604 Jy
! Component: 2550  -  total flux cleaned = -0.00350001 Jy
! Component: 2600  -  total flux cleaned = -0.00359194 Jy
! Component: 2650  -  total flux cleaned = -0.00368282 Jy
! Component: 2700  -  total flux cleaned = -0.00370512 Jy
! Component: 2750  -  total flux cleaned = -0.00374972 Jy
! Component: 2800  -  total flux cleaned = -0.00372745 Jy
! Component: 2850  -  total flux cleaned = -0.00377174 Jy
! Component: 2900  -  total flux cleaned = -0.00379372 Jy
! Component: 2950  -  total flux cleaned = -0.00381529 Jy
! Component: 3000  -  total flux cleaned = -0.00387973 Jy
! Component: 3050  -  total flux cleaned = -0.00383692 Jy
! Component: 3100  -  total flux cleaned = -0.00387921 Jy
! Component: 3150  -  total flux cleaned = -0.00385812 Jy
! Component: 3200  -  total flux cleaned = -0.00385812 Jy
! Component: 3250  -  total flux cleaned = -0.00385795 Jy
! Component: 3300  -  total flux cleaned = -0.0038373 Jy
! Component: 3350  -  total flux cleaned = -0.00383745 Jy
! Component: 3400  -  total flux cleaned = -0.00387794 Jy
! Component: 3450  -  total flux cleaned = -0.00381748 Jy
! Component: 3500  -  total flux cleaned = -0.00381748 Jy
! Component: 3550  -  total flux cleaned = -0.0038374 Jy
! Component: 3600  -  total flux cleaned = -0.00379791 Jy
! Component: 3650  -  total flux cleaned = -0.00379794 Jy
! Component: 3700  -  total flux cleaned = -0.00381751 Jy
! Component: 3750  -  total flux cleaned = -0.00379829 Jy
! Component: 3800  -  total flux cleaned = -0.00381761 Jy
! Component: 3850  -  total flux cleaned = -0.00381768 Jy
! Component: 3900  -  total flux cleaned = -0.00385563 Jy
! Component: 3950  -  total flux cleaned = -0.00383669 Jy
! Component: 4000  -  total flux cleaned = -0.0038365 Jy
! Component: 4050  -  total flux cleaned = -0.00376181 Jy
! Total flux subtracted in 4096 components = -0.00378037 Jy
! Clean residual min=-0.001117 max=0.001094 Jy/beam
! Clean residual mean=0.000003 rms=0.000321 Jy/beam
! Combined flux in latest and established models = 0.41849 Jy
keep
! Adding 316 model components to the UV plane model.
! The established model now contains 464 components and 0.41849 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219h_uvs/J1918+5520_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9747 x 1.281 at -4.44 degrees (North through East)
! Clean map  min=-0.0045776  max=0.25651 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1918+5520_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.256506 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000313168 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.36627 0.36627 0.73254 1.46508 2.93016 5.86032 11.7206 23.4413 46.8826 93.7652
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.256 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  819.067 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1918+5520_X_uvs.log closed on Thu Apr  7 12:19:04 2016