! Started logfile: /scr/pima/bg219h_uvs/J1832+0118_S_dfm.log on Thu May 19 22:39:10 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219h_uvs/J1832+0118_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1832+0118_S_uva.fits
! AN table 1: 57 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.759747 visibilities/baseline/integration-bin.
! Found source: J1832+0118
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 6236 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1832+0118_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002249Jy  sigma=22.632783
! Fit after  self-cal, rms=0.929514Jy  sigma=20.958580
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.371 mas, bmaj=7.244 mas, bpa=-5.363 degrees
! Estimated noise=0.54079 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0527608 Jy
! Component: 100  -  total flux cleaned = 0.0685178 Jy
! Total flux subtracted in 100 components = 0.0685178 Jy
! Clean residual min=-0.004033 max=0.007808 Jy/beam
! Clean residual mean=0.000017 rms=0.001328 Jy/beam
! Combined flux in latest and established models = 0.0685178 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.0685178 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064620Jy  sigma=1.399396
! Fit after  self-cal, rms=0.063104Jy  sigma=1.371893
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0102221 Jy
! Component: 100  -  total flux cleaned = 0.0165245 Jy
! Total flux subtracted in 100 components = 0.0165245 Jy
! Clean residual min=-0.003270 max=0.003696 Jy/beam
! Clean residual mean=0.000011 rms=0.000908 Jy/beam
! Combined flux in latest and established models = 0.0850423 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 40 components and 0.0850423 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060771Jy  sigma=1.314017
! Fit after  self-cal, rms=0.060726Jy  sigma=1.313077
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.786 mas, bmaj=8.131 mas, bpa=-4.001 degrees
! Estimated noise=0.410605 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00692775 Jy
! Component: 100  -  total flux cleaned = 0.0113488 Jy
! Component: 150  -  total flux cleaned = 0.0143771 Jy
! Component: 200  -  total flux cleaned = 0.0164884 Jy
! Total flux subtracted in 200 components = 0.0164884 Jy
! Clean residual min=-0.002124 max=0.002758 Jy/beam
! Clean residual mean=0.000007 rms=0.000657 Jy/beam
! Combined flux in latest and established models = 0.101531 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 71 components and 0.101531 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059821Jy  sigma=1.291579
! Fit after  self-cal, rms=0.059821Jy  sigma=1.291034
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.786 x 8.131 at -4.001 degrees (North through East)
! Clean map  min=-0.0021074  max=0.072839 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     HN        1.07     KP        1.03     LA        0.99     
!   MK        1.06     NL        0.99     OV        0.92     PT        0.98     
!   SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     HN        1.05     KP        1.00     LA        0.98     
!   MK        1.03     NL        1.12     OV        0.94     PT        0.96     
!   SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     HN        1.01     KP        0.99     LA        0.97     
!   MK        0.96     NL        0.98     OV        1.00     PT        0.92     
!   SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     HN        1.01     KP        1.06     LA        0.93     
!   MK        1.02     NL        0.93     OV        0.99     PT        0.95     
!   SC        0.97     
! 
! 
! Fit before self-cal, rms=0.059821Jy  sigma=1.291034
! Fit after  self-cal, rms=0.059826Jy  sigma=1.284759
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.799 mas, bmaj=8.186 mas, bpa=-3.766 degrees
! Estimated noise=0.408477 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000354031 Jy
! Component: 100  -  total flux cleaned = 0.000370614 Jy
! Component: 150  -  total flux cleaned = 0.000370051 Jy
! Component: 200  -  total flux cleaned = 0.000358119 Jy
! Total flux subtracted in 200 components = 0.000358119 Jy
! Clean residual min=-0.002019 max=0.002070 Jy/beam
! Clean residual mean=-0.000002 rms=0.000552 Jy/beam
! Combined flux in latest and established models = 0.101889 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 82 components and 0.101889 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059816Jy  sigma=1.284628
! Fit after  self-cal, rms=0.059871Jy  sigma=1.284353
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059871Jy  sigma=1.284353
! Fit after  self-cal, rms=0.059933Jy  sigma=1.281671
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.805 mas, bmaj=8.183 mas, bpa=-3.79 degrees
! Estimated noise=0.408237 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000227293 Jy
! Component: 100  -  total flux cleaned = 0.000276764 Jy
! Component: 150  -  total flux cleaned = 0.000290359 Jy
! Component: 200  -  total flux cleaned = 0.000303221 Jy
! Total flux subtracted in 200 components = 0.000303221 Jy
! Clean residual min=-0.001822 max=0.002129 Jy/beam
! Clean residual mean=-0.000002 rms=0.000509 Jy/beam
! Combined flux in latest and established models = 0.102192 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 85 components and 0.102192 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059923Jy  sigma=1.281518
! Fit after  self-cal, rms=0.059939Jy  sigma=1.281409
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.75198e-05 Jy
! Component: 100  -  total flux cleaned = 4.22406e-05 Jy
! Component: 150  -  total flux cleaned = 4.20368e-05 Jy
! Component: 200  -  total flux cleaned = 4.24327e-05 Jy
! Total flux subtracted in 200 components = 4.24327e-05 Jy
! Clean residual min=-0.001839 max=0.002105 Jy/beam
! Clean residual mean=-0.000002 rms=0.000506 Jy/beam
! Combined flux in latest and established models = 0.102234 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 86 components and 0.102234 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059934Jy  sigma=1.281329
! Fit after  self-cal, rms=0.059934Jy  sigma=1.281321
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059934Jy  sigma=1.281321
! Fit after  self-cal, rms=0.060102Jy  sigma=1.281314
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.805 mas, bmaj=8.191 mas, bpa=-3.889 degrees
! Estimated noise=0.409011 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00029641 Jy
! Component: 100  -  total flux cleaned = 0.000296974 Jy
! Component: 150  -  total flux cleaned = 0.000297068 Jy
! Component: 200  -  total flux cleaned = 0.000297232 Jy
! Total flux subtracted in 200 components = 0.000297232 Jy
! Clean residual min=-0.001816 max=0.002143 Jy/beam
! Clean residual mean=-0.000001 rms=0.000506 Jy/beam
! Combined flux in latest and established models = 0.102532 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 87 components and 0.102532 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060096Jy  sigma=1.281228
! Fit after  self-cal, rms=0.060099Jy  sigma=1.281217
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.37873e-05 Jy
! Component: 100  -  total flux cleaned = 2.48315e-05 Jy
! Component: 150  -  total flux cleaned = 2.48495e-05 Jy
! Component: 200  -  total flux cleaned = 1.50107e-05 Jy
! Total flux subtracted in 200 components = 1.50107e-05 Jy
! Clean residual min=-0.001824 max=0.002128 Jy/beam
! Clean residual mean=-0.000001 rms=0.000504 Jy/beam
! Combined flux in latest and established models = 0.102547 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 88 components and 0.102547 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060095Jy  sigma=1.281155
! Fit after  self-cal, rms=0.060094Jy  sigma=1.281150
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060094Jy  sigma=1.281150
! Fit after  self-cal, rms=0.060144Jy  sigma=1.281130
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.821 mas, bmaj=12.34 mas, bpa=-7.843 degrees
! Estimated noise=0.498867 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000333309 Jy
! Component: 100  -  total flux cleaned = 0.000331049 Jy
! Component: 150  -  total flux cleaned = 0.00034281 Jy
! Component: 200  -  total flux cleaned = 0.000343666 Jy
! Total flux subtracted in 200 components = 0.000343666 Jy
! Clean residual min=-0.001930 max=0.002820 Jy/beam
! Clean residual mean=-0.000003 rms=0.000630 Jy/beam
! Combined flux in latest and established models = 0.10289 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 91 components and 0.10289 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060144Jy  sigma=1.281079
! Fit after  self-cal, rms=0.060147Jy  sigma=1.281043
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (10.5, 38).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0024984 Jy
! Component: 100  -  total flux cleaned = 0.00327188 Jy
! Component: 150  -  total flux cleaned = 0.00388721 Jy
! Component: 200  -  total flux cleaned = 0.00418199 Jy
! Total flux subtracted in 200 components = 0.00418199 Jy
! Clean residual min=-0.001481 max=0.001639 Jy/beam
! Clean residual mean=-0.000004 rms=0.000462 Jy/beam
! Combined flux in latest and established models = 0.107072 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 136 components and 0.107072 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060072Jy  sigma=1.279097
! Fit after  self-cal, rms=0.060063Jy  sigma=1.278908
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.806 mas, bmaj=8.195 mas, bpa=-3.929 degrees
! Estimated noise=0.409442 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.806 x 8.195 at -3.929 degrees (North through East)
! Clean map  min=-0.0016937  max=0.072519 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.384 mas, bmaj=7.26 mas, bpa=-5.152 degrees
! Estimated noise=0.539845 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0532856 Jy
! Component: 100  -  total flux cleaned = 0.069767 Jy
! Component: 150  -  total flux cleaned = 0.0794983 Jy
! Component: 200  -  total flux cleaned = 0.085609 Jy
! Total flux subtracted in 200 components = 0.085609 Jy
! Clean residual min=-0.003099 max=0.003295 Jy/beam
! Clean residual mean=0.000008 rms=0.000821 Jy/beam
! Combined flux in latest and established models = 0.085609 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 0.085609 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.806 mas, bmaj=8.195 mas, bpa=-3.929 degrees
! Estimated noise=0.409442 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00621095 Jy
! Component: 100  -  total flux cleaned = 0.0101023 Jy
! Component: 150  -  total flux cleaned = 0.012924 Jy
! Component: 200  -  total flux cleaned = 0.0147273 Jy
! Total flux subtracted in 200 components = 0.0147273 Jy
! Clean residual min=-0.001951 max=0.002395 Jy/beam
! Clean residual mean=0.000003 rms=0.000522 Jy/beam
! Combined flux in latest and established models = 0.100336 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 61 components and 0.100336 Jy
! Inverting map 
! Added new window around map position (2, 11).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00215256 Jy
! Component: 100  -  total flux cleaned = 0.00339506 Jy
! Component: 150  -  total flux cleaned = 0.00413825 Jy
! Component: 200  -  total flux cleaned = 0.0046064 Jy
! Total flux subtracted in 200 components = 0.0046064 Jy
! Clean residual min=-0.001723 max=0.001831 Jy/beam
! Clean residual mean=0.000000 rms=0.000432 Jy/beam
! Combined flux in latest and established models = 0.104943 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 89 components and 0.104943 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.821 mas, bmaj=12.34 mas, bpa=-7.843 degrees
! Estimated noise=0.498867 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0012716 Jy
! Component: 100  -  total flux cleaned = 0.00190173 Jy
! Component: 150  -  total flux cleaned = 0.00246292 Jy
! Component: 200  -  total flux cleaned = 0.00284228 Jy
! Total flux subtracted in 200 components = 0.00284228 Jy
! Clean residual min=-0.001420 max=0.001510 Jy/beam
! Clean residual mean=-0.000003 rms=0.000440 Jy/beam
! Combined flux in latest and established models = 0.107785 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000289357 Jy
! Component: 100  -  total flux cleaned = 0.000570089 Jy
! Component: 150  -  total flux cleaned = 0.000784699 Jy
! Component: 200  -  total flux cleaned = 0.000981837 Jy
! Total flux subtracted in 200 components = 0.000981837 Jy
! Clean residual min=-0.001379 max=0.001476 Jy/beam
! Clean residual mean=-0.000004 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.108767 Jy
! Adding 74 model components to the UV plane model.
! The established model now contains 158 components and 0.108767 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.806 mas, bmaj=8.195 mas, bpa=-3.929 degrees
! Estimated noise=0.409442 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000128657 Jy
! Component: 100  -  total flux cleaned = 6.90388e-05 Jy
! Component: 150  -  total flux cleaned = 4.27364e-05 Jy
! Component: 200  -  total flux cleaned = 4.13245e-05 Jy
! Total flux subtracted in 200 components = 4.13245e-05 Jy
! Clean residual min=-0.001582 max=0.001595 Jy/beam
! Clean residual mean=-0.000001 rms=0.000390 Jy/beam
! Combined flux in latest and established models = 0.108808 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 181 components and 0.108808 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059984Jy  sigma=1.277351
! Fit after  self-cal, rms=0.059963Jy  sigma=1.277138
wmodel /J1832+0118_S_map.mod
! wmodel: Unable to open new model file: /J1832+0118_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1832+0118_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.806 x 8.195 at -3.929 degrees (North through East)
! Clean map  min=-0.0015449  max=0.073237 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1832+0118_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0732374 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000395692 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.62086 1.62086 3.24172 6.48345 12.9669 25.9338 51.8676
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.073 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  185.086 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1832+0118_S_dfm.log closed on Thu May 19 22:39:13 2016