! Started logfile: /scr/pima/bg219h_uvs/J1829+0518_X_dfm.log on Thu May 19 22:38:50 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J1829+0518_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1829+0518_X_uva.fits
! AN table 1: 61 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.914026 visibilities/baseline/integration-bin.
! Found source: J1829+0518
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 30108 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1829+0518_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004892Jy  sigma=23.491468
! Fit after  self-cal, rms=0.917055Jy  sigma=21.346394
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6839 mas, bmaj=1.701 mas, bpa=-0.7642 degrees
! Estimated noise=0.344053 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0628994 Jy
! Component: 100  -  total flux cleaned = 0.0806762 Jy
! Total flux subtracted in 100 components = 0.0806762 Jy
! Clean residual min=-0.003485 max=0.007633 Jy/beam
! Clean residual mean=-0.000002 rms=0.000837 Jy/beam
! Combined flux in latest and established models = 0.0806762 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0806762 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072744Jy  sigma=1.457679
! Fit after  self-cal, rms=0.072486Jy  sigma=1.452813
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00851477 Jy
! Component: 100  -  total flux cleaned = 0.0129694 Jy
! Total flux subtracted in 100 components = 0.0129694 Jy
! Clean residual min=-0.002736 max=0.002628 Jy/beam
! Clean residual mean=-0.000001 rms=0.000592 Jy/beam
! Combined flux in latest and established models = 0.0936456 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 14 components and 0.0936457 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071313Jy  sigma=1.413063
! Fit after  self-cal, rms=0.071328Jy  sigma=1.412731
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8968 mas, bmaj=2.057 mas, bpa=-0.2746 degrees
! Estimated noise=0.189144 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00398896 Jy
! Component: 100  -  total flux cleaned = 0.00585555 Jy
! Component: 150  -  total flux cleaned = 0.00638782 Jy
! Component: 200  -  total flux cleaned = 0.00665525 Jy
! Total flux subtracted in 200 components = 0.00665525 Jy
! Clean residual min=-0.001603 max=0.002448 Jy/beam
! Clean residual mean=-0.000002 rms=0.000406 Jy/beam
! Combined flux in latest and established models = 0.100301 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 26 components and 0.100301 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071149Jy  sigma=1.406378
! Fit after  self-cal, rms=0.071162Jy  sigma=1.406203
! Inverting map 
! Added new window around map position (-2.4, -0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0022204 Jy
! Component: 100  -  total flux cleaned = 0.00326477 Jy
! Component: 150  -  total flux cleaned = 0.00326706 Jy
! Component: 200  -  total flux cleaned = 0.0032027 Jy
! Total flux subtracted in 200 components = 0.0032027 Jy
! Clean residual min=-0.001372 max=0.001599 Jy/beam
! Clean residual mean=-0.000001 rms=0.000358 Jy/beam
! Combined flux in latest and established models = 0.103504 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 51 components and 0.103504 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071082Jy  sigma=1.404134
! Fit after  self-cal, rms=0.071071Jy  sigma=1.403887
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8968 x 2.057 at -0.2746 degrees (North through East)
! Clean map  min=-0.0012948  max=0.085709 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.98     HN        1.19     KP        0.95     
!   LA        1.00     MK        0.95     NL        0.98     OV        0.98     
!   PT        1.02     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.09     KP        1.00     
!   LA        0.95     MK        0.95     NL        0.96     OV        0.98     
!   PT        1.05     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        1.14     KP        0.99     
!   LA        0.99     MK        0.95     NL        1.00     OV        0.99     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.06     KP        1.02     
!   LA        1.01     MK        1.00     NL        0.98     OV        0.99     
!   PT        1.03     SC        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.00     KP        0.97     
!   LA        1.03     MK        0.94     NL        0.98     OV        1.01     
!   PT        1.02     SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.13     KP        0.97     
!   LA        1.00     MK        0.98     NL        1.01     OV        0.99     
!   PT        1.03     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.19     KP        0.96     
!   LA        1.02     MK        0.98     NL        0.99     OV        1.02     
!   PT        1.03     SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.02     HN        1.10     KP        0.96     
!   LA        0.99     MK        0.99     NL        1.01     OV        1.03     
!   PT        1.05     SC        1.03     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.11     KP        1.02     
!   LA        1.00     MK        0.95     NL        1.01     OV        1.00     
!   PT        1.00     SC        0.96     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.14     KP        0.93     
!   LA        1.02     MK        1.05     NL        1.02     OV        0.97     
!   PT        1.05     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.071071Jy  sigma=1.403887
! Fit after  self-cal, rms=0.074080Jy  sigma=1.401097
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.896 mas, bmaj=2.054 mas, bpa=-0.3285 degrees
! Estimated noise=0.189216 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000647813 Jy
! Component: 100  -  total flux cleaned = 0.000561306 Jy
! Component: 150  -  total flux cleaned = 0.000504394 Jy
! Component: 200  -  total flux cleaned = 0.000452114 Jy
! Total flux subtracted in 200 components = 0.000452114 Jy
! Clean residual min=-0.001093 max=0.001285 Jy/beam
! Clean residual mean=-0.000000 rms=0.000289 Jy/beam
! Combined flux in latest and established models = 0.103956 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 61 components and 0.103956 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074065Jy  sigma=1.400707
! Fit after  self-cal, rms=0.074109Jy  sigma=1.400591
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074109Jy  sigma=1.400591
! Fit after  self-cal, rms=0.075679Jy  sigma=1.398232
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8963 mas, bmaj=2.054 mas, bpa=-0.3149 degrees
! Estimated noise=0.189364 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000261472 Jy
! Component: 100  -  total flux cleaned = 0.000162822 Jy
! Component: 150  -  total flux cleaned = 4.69427e-05 Jy
! Component: 200  -  total flux cleaned = -3.00455e-05 Jy
! Total flux subtracted in 200 components = -3.00455e-05 Jy
! Clean residual min=-0.001212 max=0.001072 Jy/beam
! Clean residual mean=-0.000001 rms=0.000261 Jy/beam
! Combined flux in latest and established models = 0.103926 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 68 components and 0.103926 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075671Jy  sigma=1.398032
! Fit after  self-cal, rms=0.075686Jy  sigma=1.397941
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.57321e-06 Jy
! Component: 100  -  total flux cleaned = -3.80336e-05 Jy
! Component: 150  -  total flux cleaned = -5.98905e-05 Jy
! Component: 200  -  total flux cleaned = -5.95993e-05 Jy
! Total flux subtracted in 200 components = -5.95993e-05 Jy
! Clean residual min=-0.001174 max=0.001046 Jy/beam
! Clean residual mean=-0.000001 rms=0.000259 Jy/beam
! Combined flux in latest and established models = 0.103866 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 74 components and 0.103866 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075682Jy  sigma=1.397864
! Fit after  self-cal, rms=0.075682Jy  sigma=1.397859
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075682Jy  sigma=1.397859
! Fit after  self-cal, rms=0.075917Jy  sigma=1.397838
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8967 mas, bmaj=2.055 mas, bpa=-0.3209 degrees
! Estimated noise=0.18945 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.25228e-05 Jy
! Component: 100  -  total flux cleaned = -4.40419e-05 Jy
! Component: 150  -  total flux cleaned = -5.39993e-05 Jy
! Component: 200  -  total flux cleaned = -6.31585e-05 Jy
! Total flux subtracted in 200 components = -6.31585e-05 Jy
! Clean residual min=-0.001160 max=0.001026 Jy/beam
! Clean residual mean=-0.000001 rms=0.000257 Jy/beam
! Combined flux in latest and established models = 0.103803 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 75 components and 0.103803 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075914Jy  sigma=1.397767
! Fit after  self-cal, rms=0.075916Jy  sigma=1.397762
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.50685e-08 Jy
! Component: 100  -  total flux cleaned = 5.44587e-08 Jy
! Component: 150  -  total flux cleaned = -1.68855e-05 Jy
! Component: 200  -  total flux cleaned = -2.49877e-05 Jy
! Total flux subtracted in 200 components = -2.49877e-05 Jy
! Clean residual min=-0.001138 max=0.001016 Jy/beam
! Clean residual mean=-0.000001 rms=0.000257 Jy/beam
! Combined flux in latest and established models = 0.103778 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 80 components and 0.103778 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075914Jy  sigma=1.397718
! Fit after  self-cal, rms=0.075914Jy  sigma=1.397714
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075914Jy  sigma=1.397714
! Fit after  self-cal, rms=0.075973Jy  sigma=1.397711
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.141 mas, bmaj=3.221 mas, bpa=-3.316 degrees
! Estimated noise=0.232143 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000233348 Jy
! Component: 100  -  total flux cleaned = -0.000245063 Jy
! Component: 150  -  total flux cleaned = -0.000253649 Jy
! Component: 200  -  total flux cleaned = -0.000278049 Jy
! Total flux subtracted in 200 components = -0.000278049 Jy
! Clean residual min=-0.001134 max=0.000951 Jy/beam
! Clean residual mean=-0.000002 rms=0.000292 Jy/beam
! Combined flux in latest and established models = 0.1035 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 92 components and 0.1035 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075974Jy  sigma=1.397696
! Fit after  self-cal, rms=0.075974Jy  sigma=1.397684
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.54204e-05 Jy
! Component: 100  -  total flux cleaned = -7.92478e-05 Jy
! Component: 150  -  total flux cleaned = -8.59665e-05 Jy
! Component: 200  -  total flux cleaned = -9.82055e-05 Jy
! Total flux subtracted in 200 components = -9.82055e-05 Jy
! Clean residual min=-0.001123 max=0.000954 Jy/beam
! Clean residual mean=-0.000002 rms=0.000290 Jy/beam
! Combined flux in latest and established models = 0.103402 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 96 components and 0.103402 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075975Jy  sigma=1.397694
! Fit after  self-cal, rms=0.075975Jy  sigma=1.397690
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8969 mas, bmaj=2.056 mas, bpa=-0.3145 degrees
! Estimated noise=0.189489 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8969 x 2.056 at -0.3145 degrees (North through East)
! Clean map  min=-0.0010129  max=0.085721 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6828 mas, bmaj=1.699 mas, bpa=-0.829 degrees
! Estimated noise=0.344417 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.062635 Jy
! Component: 100  -  total flux cleaned = 0.0814553 Jy
! Component: 150  -  total flux cleaned = 0.0899663 Jy
! Component: 200  -  total flux cleaned = 0.0946302 Jy
! Total flux subtracted in 200 components = 0.0946302 Jy
! Clean residual min=-0.002235 max=0.002573 Jy/beam
! Clean residual mean=-0.000001 rms=0.000547 Jy/beam
! Combined flux in latest and established models = 0.0946302 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.0946302 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8969 mas, bmaj=2.056 mas, bpa=-0.3145 degrees
! Estimated noise=0.189489 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.004102 Jy
! Component: 100  -  total flux cleaned = 0.00642523 Jy
! Component: 150  -  total flux cleaned = 0.00791044 Jy
! Component: 200  -  total flux cleaned = 0.00857554 Jy
! Total flux subtracted in 200 components = 0.00857554 Jy
! Clean residual min=-0.001419 max=0.001125 Jy/beam
! Clean residual mean=-0.000001 rms=0.000279 Jy/beam
! Combined flux in latest and established models = 0.103206 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 26 components and 0.103206 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.141 mas, bmaj=3.221 mas, bpa=-3.316 degrees
! Estimated noise=0.232143 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000532564 Jy
! Component: 100  -  total flux cleaned = 0.000535721 Jy
! Component: 150  -  total flux cleaned = 0.000517253 Jy
! Component: 200  -  total flux cleaned = 0.000487163 Jy
! Total flux subtracted in 200 components = 0.000487163 Jy
! Clean residual min=-0.001177 max=0.001022 Jy/beam
! Clean residual mean=-0.000002 rms=0.000299 Jy/beam
! Combined flux in latest and established models = 0.103693 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.51802e-05 Jy
! Component: 100  -  total flux cleaned = -4.88048e-05 Jy
! Component: 150  -  total flux cleaned = -8.14115e-05 Jy
! Component: 200  -  total flux cleaned = -0.000101888 Jy
! Total flux subtracted in 200 components = -0.000101888 Jy
! Clean residual min=-0.001148 max=0.001006 Jy/beam
! Clean residual mean=-0.000002 rms=0.000294 Jy/beam
! Combined flux in latest and established models = 0.103591 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 48 components and 0.103591 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8969 mas, bmaj=2.056 mas, bpa=-0.3145 degrees
! Estimated noise=0.189489 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.90617e-05 Jy
! Component: 100  -  total flux cleaned = -0.000143134 Jy
! Component: 150  -  total flux cleaned = -0.000252499 Jy
! Component: 200  -  total flux cleaned = -0.000253448 Jy
! Total flux subtracted in 200 components = -0.000253448 Jy
! Clean residual min=-0.001270 max=0.001079 Jy/beam
! Clean residual mean=-0.000001 rms=0.000262 Jy/beam
! Combined flux in latest and established models = 0.103338 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 63 components and 0.103338 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075989Jy  sigma=1.398061
! Fit after  self-cal, rms=0.075983Jy  sigma=1.398018
wmodel /J1829+0518_X_map.mod
! wmodel: Unable to open new model file: /J1829+0518_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1829+0518_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8969 x 2.056 at -0.3145 degrees (North through East)
! Clean map  min=-0.0010964  max=0.085839 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1829+0518_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0858394 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000260857 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.911669 0.911669 1.82334 3.64668 7.29335 14.5867 29.1734 58.3468
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.085 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  329.066 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1829+0518_X_dfm.log closed on Thu May 19 22:38:53 2016