! Started logfile: /scr/pima/bg219h_uvs/J1826-2924_X_dfm.log on Thu May 19 22:38:42 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J1826-2924_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1826-2924_X_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.855556 visibilities/baseline/integration-bin.
! Found source: J1826-2924
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 12936 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1826-2924_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.048361Jy  sigma=19.529244
! Fit after  self-cal, rms=0.717586Jy  sigma=13.135639
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5956 mas, bmaj=1.692 mas, bpa=-10.23 degrees
! Estimated noise=0.620993 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.218512 Jy
! Component: 100  -  total flux cleaned = 0.272796 Jy
! Total flux subtracted in 100 components = 0.272796 Jy
! Clean residual min=-0.008912 max=0.024720 Jy/beam
! Clean residual mean=-0.000021 rms=0.002328 Jy/beam
! Combined flux in latest and established models = 0.272796 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.272796 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.100980Jy  sigma=1.705930
! Fit after  self-cal, rms=0.100959Jy  sigma=1.705243
! Inverting map 
! Added new window around map position (-0.8, -2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0254479 Jy
! Component: 100  -  total flux cleaned = 0.0383227 Jy
! Total flux subtracted in 100 components = 0.0383227 Jy
! Clean residual min=-0.006790 max=0.012895 Jy/beam
! Clean residual mean=-0.000014 rms=0.001532 Jy/beam
! Combined flux in latest and established models = 0.311119 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 10 components and 0.311119 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.093995Jy  sigma=1.538332
! Fit after  self-cal, rms=0.093878Jy  sigma=1.534434
! Inverting map 
! Added new window around map position (-1.2, 1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0111158 Jy
! Component: 100  -  total flux cleaned = 0.0135853 Jy
! Total flux subtracted in 100 components = 0.0135853 Jy
! Clean residual min=-0.005611 max=0.010720 Jy/beam
! Clean residual mean=-0.000011 rms=0.001298 Jy/beam
! Combined flux in latest and established models = 0.324704 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 18 components and 0.324704 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.092575Jy  sigma=1.510618
! Fit after  self-cal, rms=0.092482Jy  sigma=1.507402
! Inverting map 
! Added new window around map position (1.2, -2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00771656 Jy
! Component: 100  -  total flux cleaned = 0.0118361 Jy
! Total flux subtracted in 100 components = 0.0118361 Jy
! Clean residual min=-0.005108 max=0.005936 Jy/beam
! Clean residual mean=-0.000009 rms=0.001154 Jy/beam
! Combined flux in latest and established models = 0.33654 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 23 components and 0.33654 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091872Jy  sigma=1.499095
! Fit after  self-cal, rms=0.091888Jy  sigma=1.498906
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7805 mas, bmaj=2.068 mas, bpa=-7.285 degrees
! Estimated noise=0.38085 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000338252 Jy
! Component: 100  -  total flux cleaned = 0.000436309 Jy
! Component: 150  -  total flux cleaned = 0.000355465 Jy
! Component: 200  -  total flux cleaned = 0.00020858 Jy
! Total flux subtracted in 200 components = 0.00020858 Jy
! Clean residual min=-0.005958 max=0.005818 Jy/beam
! Clean residual mean=-0.000007 rms=0.001212 Jy/beam
! Combined flux in latest and established models = 0.336749 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 35 components and 0.336749 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091657Jy  sigma=1.496791
! Fit after  self-cal, rms=0.091661Jy  sigma=1.496720
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7805 x 2.068 at -7.285 degrees (North through East)
! Clean map  min=-0.0056354  max=0.27697 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.18     KP        0.98     
!   LA        1.02     MK        1.02     NL        0.98     OV        0.99     
!   PT        1.02     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.14     KP        0.97     
!   LA        1.03     MK        1.06     NL        0.98     OV        0.98     
!   PT        1.04     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.11     KP        1.01     
!   LA        1.04     MK        1.00     NL        0.97     OV        0.99     
!   PT        1.04     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        1.12     KP        0.97     
!   LA        1.04     MK        1.01     NL        0.97     OV        0.99     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.99     HN        1.13     KP        0.97     
!   LA        1.04     MK        1.00     NL        0.96     OV        0.98     
!   PT        1.06     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.13     KP        0.98     
!   LA        1.05     MK        1.01     NL        0.98     OV        0.95     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.14     KP        0.99     
!   LA        1.04     MK        0.98     NL        0.94     OV        0.98     
!   PT        1.05     SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        1.07     KP        1.00     
!   LA        1.05     MK        0.97     NL        0.97     OV        0.99     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        1.13     KP        0.98     
!   LA        1.03     MK        0.99     NL        0.96     OV        0.99     
!   PT        1.02     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.97     HN        1.17     KP        0.99     
!   LA        1.01     MK        0.99     NL        0.96     OV        0.98     
!   PT        1.04     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.96     HN        1.10     KP        0.97     
!   LA        1.01     MK        0.98     NL        0.93     OV        0.98     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.13     KP        0.94     
!   LA        1.03     MK        1.03     NL        0.96     OV        0.98     
!   PT        1.00     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.091661Jy  sigma=1.496720
! Fit after  self-cal, rms=0.095078Jy  sigma=1.473726
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7836 mas, bmaj=2.061 mas, bpa=-7.074 degrees
! Estimated noise=0.382903 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00324626 Jy
! Component: 100  -  total flux cleaned = -0.00364498 Jy
! Component: 150  -  total flux cleaned = -0.00390699 Jy
! Component: 200  -  total flux cleaned = -0.00413647 Jy
! Total flux subtracted in 200 components = -0.00413647 Jy
! Clean residual min=-0.004029 max=0.003855 Jy/beam
! Clean residual mean=-0.000010 rms=0.000887 Jy/beam
! Combined flux in latest and established models = 0.332613 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 50 components and 0.332613 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.094940Jy  sigma=1.470785
! Fit after  self-cal, rms=0.094994Jy  sigma=1.470595
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.094994Jy  sigma=1.470595
! Fit after  self-cal, rms=0.095701Jy  sigma=1.466688
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7849 mas, bmaj=2.062 mas, bpa=-6.982 degrees
! Estimated noise=0.38249 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0023652 Jy
! Component: 100  -  total flux cleaned = -0.00271834 Jy
! Component: 150  -  total flux cleaned = -0.002821 Jy
! Component: 200  -  total flux cleaned = -0.00295959 Jy
! Total flux subtracted in 200 components = -0.00295959 Jy
! Clean residual min=-0.003584 max=0.003522 Jy/beam
! Clean residual mean=-0.000009 rms=0.000799 Jy/beam
! Combined flux in latest and established models = 0.329653 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 60 components and 0.329653 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.095615Jy  sigma=1.465119
! Fit after  self-cal, rms=0.095614Jy  sigma=1.465067
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (15.4, 22.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00286521 Jy
! Component: 100  -  total flux cleaned = 0.00349355 Jy
! Component: 150  -  total flux cleaned = 0.00366977 Jy
! Component: 200  -  total flux cleaned = 0.00386937 Jy
! Total flux subtracted in 200 components = 0.00386937 Jy
! Clean residual min=-0.003678 max=0.003294 Jy/beam
! Clean residual mean=-0.000010 rms=0.000768 Jy/beam
! Combined flux in latest and established models = 0.333522 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 81 components and 0.333522 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.095509Jy  sigma=1.463204
! Fit after  self-cal, rms=0.095501Jy  sigma=1.463088
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.095501Jy  sigma=1.463088
! Fit after  self-cal, rms=0.096273Jy  sigma=1.457957
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7855 mas, bmaj=2.063 mas, bpa=-6.966 degrees
! Estimated noise=0.381862 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000468902 Jy
! Component: 100  -  total flux cleaned = -0.000617672 Jy
! Component: 150  -  total flux cleaned = -0.000619007 Jy
! Component: 200  -  total flux cleaned = -0.000581728 Jy
! Total flux subtracted in 200 components = -0.000581728 Jy
! Clean residual min=-0.003120 max=0.002829 Jy/beam
! Clean residual mean=-0.000009 rms=0.000666 Jy/beam
! Combined flux in latest and established models = 0.332941 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 94 components and 0.332941 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.096218Jy  sigma=1.457151
! Fit after  self-cal, rms=0.096222Jy  sigma=1.457104
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.9908e-05 Jy
! Component: 100  -  total flux cleaned = 4.27114e-05 Jy
! Component: 150  -  total flux cleaned = 4.24797e-05 Jy
! Component: 200  -  total flux cleaned = 4.27279e-05 Jy
! Total flux subtracted in 200 components = 4.27279e-05 Jy
! Clean residual min=-0.003072 max=0.002826 Jy/beam
! Clean residual mean=-0.000009 rms=0.000661 Jy/beam
! Combined flux in latest and established models = 0.332983 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 102 components and 0.332983 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.096199Jy  sigma=1.456721
! Fit after  self-cal, rms=0.096195Jy  sigma=1.456708
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.096195Jy  sigma=1.456708
! Fit after  self-cal, rms=0.096558Jy  sigma=1.456535
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.262 mas, bmaj=5.778 mas, bpa=-1.759 degrees
! Estimated noise=0.496917 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000275863 Jy
! Component: 100  -  total flux cleaned = -0.000278415 Jy
! Component: 150  -  total flux cleaned = -0.000279868 Jy
! Component: 200  -  total flux cleaned = -0.000304842 Jy
! Total flux subtracted in 200 components = -0.000304842 Jy
! Clean residual min=-0.003964 max=0.003217 Jy/beam
! Clean residual mean=-0.000018 rms=0.000957 Jy/beam
! Combined flux in latest and established models = 0.332679 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 108 components and 0.332679 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.096545Jy  sigma=1.456255
! Fit after  self-cal, rms=0.096542Jy  sigma=1.456204
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.4296e-05 Jy
! Component: 100  -  total flux cleaned = -8.84957e-06 Jy
! Component: 150  -  total flux cleaned = 1.2739e-05 Jy
! Component: 200  -  total flux cleaned = -5.30141e-06 Jy
! Total flux subtracted in 200 components = -5.30141e-06 Jy
! Clean residual min=-0.003963 max=0.003157 Jy/beam
! Clean residual mean=-0.000017 rms=0.000949 Jy/beam
! Combined flux in latest and established models = 0.332673 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 111 components and 0.332673 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.096542Jy  sigma=1.456169
! Fit after  self-cal, rms=0.096540Jy  sigma=1.456154
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7857 mas, bmaj=2.062 mas, bpa=-6.956 degrees
! Estimated noise=0.381366 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7857 x 2.062 at -6.956 degrees (North through East)
! Clean map  min=-0.0026854  max=0.28144 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5983 mas, bmaj=1.68 mas, bpa=-9.959 degrees
! Estimated noise=0.625789 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.219875 Jy
! Component: 100  -  total flux cleaned = 0.273811 Jy
! Component: 150  -  total flux cleaned = 0.297659 Jy
! Component: 200  -  total flux cleaned = 0.310234 Jy
! Total flux subtracted in 200 components = 0.310234 Jy
! Clean residual min=-0.004757 max=0.006305 Jy/beam
! Clean residual mean=-0.000009 rms=0.001119 Jy/beam
! Combined flux in latest and established models = 0.310234 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.310234 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7857 mas, bmaj=2.062 mas, bpa=-6.956 degrees
! Estimated noise=0.381366 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00841949 Jy
! Component: 100  -  total flux cleaned = 0.0132928 Jy
! Component: 150  -  total flux cleaned = 0.0154021 Jy
! Component: 200  -  total flux cleaned = 0.0167211 Jy
! Total flux subtracted in 200 components = 0.0167211 Jy
! Clean residual min=-0.003289 max=0.002856 Jy/beam
! Clean residual mean=-0.000010 rms=0.000720 Jy/beam
! Combined flux in latest and established models = 0.326955 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 33 components and 0.326955 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.262 mas, bmaj=5.778 mas, bpa=-1.759 degrees
! Estimated noise=0.496917 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0031669 Jy
! Component: 100  -  total flux cleaned = 0.00487574 Jy
! Component: 150  -  total flux cleaned = 0.00546402 Jy
! Component: 200  -  total flux cleaned = 0.005645 Jy
! Total flux subtracted in 200 components = 0.005645 Jy
! Clean residual min=-0.003939 max=0.003318 Jy/beam
! Clean residual mean=-0.000018 rms=0.000961 Jy/beam
! Combined flux in latest and established models = 0.3326 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000149118 Jy
! Component: 100  -  total flux cleaned = 0.000204553 Jy
! Component: 150  -  total flux cleaned = 0.000204623 Jy
! Component: 200  -  total flux cleaned = 0.000227738 Jy
! Total flux subtracted in 200 components = 0.000227738 Jy
! Clean residual min=-0.003928 max=0.003240 Jy/beam
! Clean residual mean=-0.000017 rms=0.000954 Jy/beam
! Combined flux in latest and established models = 0.332828 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 60 components and 0.332828 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7857 mas, bmaj=2.062 mas, bpa=-6.956 degrees
! Estimated noise=0.381366 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000127997 Jy
! Component: 100  -  total flux cleaned = -0.000182218 Jy
! Component: 150  -  total flux cleaned = -0.000383975 Jy
! Component: 200  -  total flux cleaned = -0.000385053 Jy
! Total flux subtracted in 200 components = -0.000385053 Jy
! Clean residual min=-0.002867 max=0.002810 Jy/beam
! Clean residual mean=-0.000008 rms=0.000652 Jy/beam
! Combined flux in latest and established models = 0.332443 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 77 components and 0.332443 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.096615Jy  sigma=1.457566
! Fit after  self-cal, rms=0.096587Jy  sigma=1.457426
wmodel /J1826-2924_X_map.mod
! wmodel: Unable to open new model file: /J1826-2924_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1826-2924_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7857 x 2.062 at -6.956 degrees (North through East)
! Clean map  min=-0.0026595  max=0.28412 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1826-2924_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.28412 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000649099 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.68538 0.68538 1.37076 2.74152 5.48304 10.9661 21.9321 43.8643 87.7286
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0019 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.284 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  437.713 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1826-2924_X_dfm.log closed on Thu May 19 22:38:45 2016