! Started logfile: /scr/pima/bg219h_uvs/J1810+5649_X_uvs.log on Thu Apr  7 12:17:28 2016
obs /scr/pima/bg219h_uvs/J1810+5649_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1810+5649_X_uva.fits
! AN table 1: 41 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.892141 visibilities/baseline/integration-bin.
! Found source: J1810+5649
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 19752 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219h_uvs/J1810+5649_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.094906Jy  sigma=25.109847
! Fit after  self-cal, rms=0.644996Jy  sigma=14.610781
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7691 mas, bmaj=1.006 mas, bpa=-12.17 degrees
! Estimated noise=0.597042 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.270039 Jy
! Component: 100  -  total flux cleaned = 0.3393 Jy
! Total flux subtracted in 100 components = 0.3393 Jy
! Clean residual min=-0.020203 max=0.072885 Jy/beam
! Clean residual mean=-0.000017 rms=0.005891 Jy/beam
! Combined flux in latest and established models = 0.3393 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.3393 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.142040Jy  sigma=3.034567
! Fit after  self-cal, rms=0.141988Jy  sigma=3.034017
! Inverting map 
! Added new window around map position (-1.2, 1.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0628618 Jy
! Component: 100  -  total flux cleaned = 0.0945085 Jy
! Total flux subtracted in 100 components = 0.0945085 Jy
! Clean residual min=-0.013578 max=0.025786 Jy/beam
! Clean residual mean=-0.000016 rms=0.003415 Jy/beam
! Combined flux in latest and established models = 0.433809 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 18 components and 0.433809 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.102797Jy  sigma=2.130694
! Fit after  self-cal, rms=0.100501Jy  sigma=2.080206
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0242235 Jy
! Component: 100  -  total flux cleaned = 0.0413305 Jy
! Total flux subtracted in 100 components = 0.0413305 Jy
! Clean residual min=-0.011300 max=0.017271 Jy/beam
! Clean residual mean=-0.000016 rms=0.002658 Jy/beam
! Combined flux in latest and established models = 0.475139 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 29 components and 0.475139 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.090130Jy  sigma=1.840455
! Fit after  self-cal, rms=0.089904Jy  sigma=1.834582
! Inverting map 
! Added new window around map position (2.2, -2.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0165194 Jy
! Component: 100  -  total flux cleaned = 0.0288923 Jy
! Total flux subtracted in 100 components = 0.0288923 Jy
! Clean residual min=-0.009435 max=0.012583 Jy/beam
! Clean residual mean=-0.000014 rms=0.002263 Jy/beam
! Combined flux in latest and established models = 0.504032 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 39 components and 0.504032 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.084439Jy  sigma=1.709707
! Fit after  self-cal, rms=0.084354Jy  sigma=1.707308
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.982 mas, bmaj=1.267 mas, bpa=-13.29 degrees
! Estimated noise=0.303848 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.8, -1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0207567 Jy
! Component: 100  -  total flux cleaned = 0.0359049 Jy
! Component: 150  -  total flux cleaned = 0.0480359 Jy
! Component: 200  -  total flux cleaned = 0.0578646 Jy
! Total flux subtracted in 200 components = 0.0578646 Jy
! Clean residual min=-0.006777 max=0.009975 Jy/beam
! Clean residual mean=-0.000030 rms=0.001936 Jy/beam
! Combined flux in latest and established models = 0.561896 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 74 components and 0.561896 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.076246Jy  sigma=1.529416
! Fit after  self-cal, rms=0.075928Jy  sigma=1.521568
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.982 x 1.267 at -13.29 degrees (North through East)
! Clean map  min=-0.0059606  max=0.35581 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.97     HN        1.19     KP        0.97     
!   LA        0.96     MK        1.02     NL        0.99     OV        1.01     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        1.16     KP        0.99     
!   LA        0.96     MK        1.02     NL        1.00     OV        0.99     
!   PT        0.96     SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        1.16     KP        0.98     
!   LA        0.95     MK        1.02     NL        1.01     OV        0.99     
!   PT        0.97     SC        0.98     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.18     KP        0.97     
!   LA        0.97     MK        1.02     NL        1.00     OV        0.99     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        1.14     KP        0.99     
!   LA        0.97     MK        1.01     NL        1.00     OV        1.00     
!   PT        0.96     SC        1.00     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.075928Jy  sigma=1.521568
! Fit after  self-cal, rms=0.075477Jy  sigma=1.471305
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.989 mas, bmaj=1.275 mas, bpa=-12.25 degrees
! Estimated noise=0.302193 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00720284 Jy
! Component: 100  -  total flux cleaned = 0.0120368 Jy
! Component: 150  -  total flux cleaned = 0.0151125 Jy
! Component: 200  -  total flux cleaned = 0.0165301 Jy
! Total flux subtracted in 200 components = 0.0165301 Jy
! Clean residual min=-0.004559 max=0.006092 Jy/beam
! Clean residual mean=-0.000014 rms=0.001194 Jy/beam
! Combined flux in latest and established models = 0.578427 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 92 components and 0.578426 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.074534Jy  sigma=1.449809
! Fit after  self-cal, rms=0.074497Jy  sigma=1.448354
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.074497Jy  sigma=1.448354
! Fit after  self-cal, rms=0.074126Jy  sigma=1.426904
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9873 mas, bmaj=1.275 mas, bpa=-12.61 degrees
! Estimated noise=0.302102 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00139475 Jy
! Component: 100  -  total flux cleaned = 0.00251225 Jy
! Component: 150  -  total flux cleaned = 0.00335733 Jy
! Component: 200  -  total flux cleaned = 0.00395287 Jy
! Total flux subtracted in 200 components = 0.00395287 Jy
! Clean residual min=-0.003859 max=0.004747 Jy/beam
! Clean residual mean=-0.000007 rms=0.000987 Jy/beam
! Combined flux in latest and established models = 0.582379 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 102 components and 0.582379 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.073875Jy  sigma=1.421651
! Fit after  self-cal, rms=0.073858Jy  sigma=1.421189
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4, -5.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00481103 Jy
! Component: 100  -  total flux cleaned = 0.00801563 Jy
! Component: 150  -  total flux cleaned = 0.0103099 Jy
! Component: 200  -  total flux cleaned = 0.0116376 Jy
! Total flux subtracted in 200 components = 0.0116376 Jy
! Clean residual min=-0.003357 max=0.003713 Jy/beam
! Clean residual mean=-0.000003 rms=0.000849 Jy/beam
! Combined flux in latest and established models = 0.594017 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 124 components and 0.594017 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.073411Jy  sigma=1.411528
! Fit after  self-cal, rms=0.073396Jy  sigma=1.410935
! Inverting map 
! Added new window around map position (2, -9.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00320824 Jy
! Component: 100  -  total flux cleaned = 0.00472272 Jy
! Component: 150  -  total flux cleaned = 0.00571944 Jy
! Component: 200  -  total flux cleaned = 0.00648107 Jy
! Total flux subtracted in 200 components = 0.00648107 Jy
! Clean residual min=-0.003049 max=0.003455 Jy/beam
! Clean residual mean=-0.000002 rms=0.000765 Jy/beam
! Combined flux in latest and established models = 0.600498 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 141 components and 0.600498 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.073121Jy  sigma=1.405631
! Fit after  self-cal, rms=0.073109Jy  sigma=1.405192
! Inverting map 
! Added new window around map position (6.6, -7.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00323506 Jy
! Component: 100  -  total flux cleaned = 0.00479031 Jy
! Component: 150  -  total flux cleaned = 0.00569778 Jy
! Component: 200  -  total flux cleaned = 0.00623067 Jy
! Total flux subtracted in 200 components = 0.00623067 Jy
! Clean residual min=-0.002781 max=0.003034 Jy/beam
! Clean residual mean=-0.000001 rms=0.000696 Jy/beam
! Combined flux in latest and established models = 0.606729 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 159 components and 0.606729 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.072899Jy  sigma=1.401285
! Fit after  self-cal, rms=0.072890Jy  sigma=1.400843
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.072890Jy  sigma=1.400843
! Fit after  self-cal, rms=0.072719Jy  sigma=1.399198
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9866 mas, bmaj=1.275 mas, bpa=-12.65 degrees
! Estimated noise=0.302108 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00213748 Jy
! Component: 100  -  total flux cleaned = 0.00357039 Jy
! Component: 150  -  total flux cleaned = 0.00436641 Jy
! Component: 200  -  total flux cleaned = 0.00487288 Jy
! Total flux subtracted in 200 components = 0.00487288 Jy
! Clean residual min=-0.002699 max=0.002869 Jy/beam
! Clean residual mean=-0.000002 rms=0.000663 Jy/beam
! Combined flux in latest and established models = 0.611602 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 168 components and 0.611602 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.072589Jy  sigma=1.396861
! Fit after  self-cal, rms=0.072587Jy  sigma=1.396689
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (19.6, -51.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0024102 Jy
! Component: 100  -  total flux cleaned = 0.00373925 Jy
! Component: 150  -  total flux cleaned = 0.00428383 Jy
! Component: 200  -  total flux cleaned = 0.00469617 Jy
! Total flux subtracted in 200 components = 0.00469617 Jy
! Clean residual min=-0.002552 max=0.002478 Jy/beam
! Clean residual mean=-0.000002 rms=0.000616 Jy/beam
! Combined flux in latest and established models = 0.616298 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 178 components and 0.616298 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.072467Jy  sigma=1.393902
! Fit after  self-cal, rms=0.072463Jy  sigma=1.393784
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.072463Jy  sigma=1.393784
! Fit after  self-cal, rms=0.072387Jy  sigma=1.393484
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.223 mas, bmaj=2.366 mas, bpa=-7.29 degrees
! Estimated noise=0.390598 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00221141 Jy
! Component: 100  -  total flux cleaned = 0.00391649 Jy
! Component: 150  -  total flux cleaned = 0.0051371 Jy
! Component: 200  -  total flux cleaned = 0.00605507 Jy
! Total flux subtracted in 200 components = 0.00605507 Jy
! Clean residual min=-0.002927 max=0.003080 Jy/beam
! Clean residual mean=-0.000004 rms=0.000835 Jy/beam
! Combined flux in latest and established models = 0.622353 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 201 components and 0.622353 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.072338Jy  sigma=1.392560
! Fit after  self-cal, rms=0.072334Jy  sigma=1.392478
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000695951 Jy
! Component: 100  -  total flux cleaned = 0.00130778 Jy
! Component: 150  -  total flux cleaned = 0.00187 Jy
! Component: 200  -  total flux cleaned = 0.00238999 Jy
! Total flux subtracted in 200 components = 0.00238999 Jy
! Clean residual min=-0.002786 max=0.002808 Jy/beam
! Clean residual mean=-0.000004 rms=0.000801 Jy/beam
! Combined flux in latest and established models = 0.624743 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 212 components and 0.624743 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.072304Jy  sigma=1.392045
! Fit after  self-cal, rms=0.072304Jy  sigma=1.392014
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.986 mas, bmaj=1.275 mas, bpa=-12.71 degrees
! Estimated noise=0.302116 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.986 x 1.275 at -12.71 degrees (North through East)
! Clean map  min=-0.0023692  max=0.35146 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7713 mas, bmaj=1.013 mas, bpa=-11.76 degrees
! Estimated noise=0.595499 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.268617 Jy
! Component: 100  -  total flux cleaned = 0.354475 Jy
! Component: 150  -  total flux cleaned = 0.403091 Jy
! Component: 200  -  total flux cleaned = 0.433951 Jy
! Total flux subtracted in 200 components = 0.433951 Jy
! Clean residual min=-0.011791 max=0.016817 Jy/beam
! Clean residual mean=-0.000010 rms=0.002859 Jy/beam
! Combined flux in latest and established models = 0.433952 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.433952 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.986 mas, bmaj=1.275 mas, bpa=-12.71 degrees
! Estimated noise=0.302116 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0336956 Jy
! Component: 100  -  total flux cleaned = 0.0575244 Jy
! Component: 150  -  total flux cleaned = 0.0757509 Jy
! Component: 200  -  total flux cleaned = 0.0902227 Jy
! Total flux subtracted in 200 components = 0.0902227 Jy
! Clean residual min=-0.005652 max=0.009256 Jy/beam
! Clean residual mean=-0.000023 rms=0.001901 Jy/beam
! Combined flux in latest and established models = 0.524174 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 58 components and 0.524174 Jy
! Inverting map 
! Added new window around map position (0.8, 0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0117665 Jy
! Component: 100  -  total flux cleaned = 0.0212824 Jy
! Component: 150  -  total flux cleaned = 0.0292123 Jy
! Component: 200  -  total flux cleaned = 0.036067 Jy
! Total flux subtracted in 200 components = 0.036067 Jy
! Clean residual min=-0.003986 max=0.005388 Jy/beam
! Clean residual mean=-0.000014 rms=0.001234 Jy/beam
! Combined flux in latest and established models = 0.560241 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 86 components and 0.560241 Jy
! Inverting map 
! Added new window around map position (4.4, -7.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00622598 Jy
! Component: 100  -  total flux cleaned = 0.0115545 Jy
! Component: 150  -  total flux cleaned = 0.0163079 Jy
! Component: 200  -  total flux cleaned = 0.0205721 Jy
! Total flux subtracted in 200 components = 0.0205721 Jy
! Clean residual min=-0.003311 max=0.003990 Jy/beam
! Clean residual mean=-0.000010 rms=0.000947 Jy/beam
! Combined flux in latest and established models = 0.580813 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 114 components and 0.580814 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.223 mas, bmaj=2.366 mas, bpa=-7.29 degrees
! Estimated noise=0.390598 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00741213 Jy
! Component: 100  -  total flux cleaned = 0.0131096 Jy
! Component: 150  -  total flux cleaned = 0.0178734 Jy
! Component: 200  -  total flux cleaned = 0.0219598 Jy
! Total flux subtracted in 200 components = 0.0219598 Jy
! Clean residual min=-0.003750 max=0.004497 Jy/beam
! Clean residual mean=-0.000011 rms=0.001171 Jy/beam
! Combined flux in latest and established models = 0.602773 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00351761 Jy
! Component: 100  -  total flux cleaned = 0.00656476 Jy
! Component: 150  -  total flux cleaned = 0.00911551 Jy
! Component: 200  -  total flux cleaned = 0.0109006 Jy
! Total flux subtracted in 200 components = 0.0109006 Jy
! Clean residual min=-0.003276 max=0.003534 Jy/beam
! Clean residual mean=-0.000007 rms=0.000949 Jy/beam
! Combined flux in latest and established models = 0.613674 Jy
! Adding 100 model components to the UV plane model.
! The established model now contains 194 components and 0.613674 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.986 mas, bmaj=1.275 mas, bpa=-12.71 degrees
! Estimated noise=0.302116 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000513436 Jy
! Component: 100  -  total flux cleaned = 0.00169387 Jy
! Component: 150  -  total flux cleaned = 0.00275938 Jy
! Component: 200  -  total flux cleaned = 0.00361694 Jy
! Total flux subtracted in 200 components = 0.00361694 Jy
! Clean residual min=-0.002683 max=0.002580 Jy/beam
! Clean residual mean=-0.000003 rms=0.000615 Jy/beam
! Combined flux in latest and established models = 0.617291 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 221 components and 0.617291 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.072454Jy  sigma=1.394238
! Fit after  self-cal, rms=0.072419Jy  sigma=1.393354
wmodel /scr/pima/bg219h_uvs/J1810+5649_X_map.mod
! Writing 221 model components to file: /scr/pima/bg219h_uvs/J1810+5649_X_map.mod
wobs /scr/pima/bg219h_uvs/J1810+5649_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219h_uvs/J1810+5649_X_uvs.fits
wwins /scr/pima/bg219h_uvs/J1810+5649_X_map.win
! wwins: Wrote 10 windows to /scr/pima/bg219h_uvs/J1810+5649_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000504016 Jy
! Component: 100  -  total flux cleaned = -0.00103838 Jy
! Component: 150  -  total flux cleaned = -0.00124768 Jy
! Component: 200  -  total flux cleaned = -0.00132647 Jy
! Component: 250  -  total flux cleaned = -0.00124908 Jy
! Component: 300  -  total flux cleaned = -0.0012494 Jy
! Component: 350  -  total flux cleaned = -0.00121351 Jy
! Component: 400  -  total flux cleaned = -0.00117842 Jy
! Component: 450  -  total flux cleaned = -0.00117881 Jy
! Component: 500  -  total flux cleaned = -0.00114516 Jy
! Component: 550  -  total flux cleaned = -0.00104704 Jy
! Component: 600  -  total flux cleaned = -0.00104781 Jy
! Component: 650  -  total flux cleaned = -0.000921617 Jy
! Component: 700  -  total flux cleaned = -0.000798613 Jy
! Component: 750  -  total flux cleaned = -0.00067786 Jy
! Component: 800  -  total flux cleaned = -0.000529632 Jy
! Component: 850  -  total flux cleaned = -0.000413383 Jy
! Component: 900  -  total flux cleaned = -0.000242118 Jy
! Component: 950  -  total flux cleaned = -0.00013042 Jy
! Component: 1000  -  total flux cleaned = -2.14034e-05 Jy
! Component: 1050  -  total flux cleaned = 3.27448e-05 Jy
! Component: 1100  -  total flux cleaned = 0.000139481 Jy
! Component: 1150  -  total flux cleaned = 0.000244301 Jy
! Component: 1200  -  total flux cleaned = 0.00034795 Jy
! Component: 1250  -  total flux cleaned = 0.000499769 Jy
! Component: 1300  -  total flux cleaned = 0.000599381 Jy
! Component: 1350  -  total flux cleaned = 0.000697326 Jy
! Component: 1400  -  total flux cleaned = 0.000866136 Jy
! Component: 1450  -  total flux cleaned = 0.000865669 Jy
! Component: 1500  -  total flux cleaned = 0.000959856 Jy
! Component: 1550  -  total flux cleaned = 0.00112212 Jy
! Component: 1600  -  total flux cleaned = 0.00109945 Jy
! Component: 1650  -  total flux cleaned = 0.00123471 Jy
! Component: 1700  -  total flux cleaned = 0.0013682 Jy
! Component: 1750  -  total flux cleaned = 0.00139004 Jy
! Component: 1800  -  total flux cleaned = 0.00145529 Jy
! Component: 1850  -  total flux cleaned = 0.00151915 Jy
! Component: 1900  -  total flux cleaned = 0.00149837 Jy
! Component: 1950  -  total flux cleaned = 0.00158222 Jy
! Component: 2000  -  total flux cleaned = 0.0017271 Jy
! Component: 2050  -  total flux cleaned = 0.00178804 Jy
! Component: 2100  -  total flux cleaned = 0.00186898 Jy
! Component: 2150  -  total flux cleaned = 0.00188894 Jy
! Component: 2200  -  total flux cleaned = 0.00198788 Jy
! Component: 2250  -  total flux cleaned = 0.00206609 Jy
! Component: 2300  -  total flux cleaned = 0.0021433 Jy
! Component: 2350  -  total flux cleaned = 0.00212387 Jy
! Component: 2400  -  total flux cleaned = 0.00216208 Jy
! Component: 2450  -  total flux cleaned = 0.00221845 Jy
! Component: 2500  -  total flux cleaned = 0.00218124 Jy
! Component: 2550  -  total flux cleaned = 0.00221809 Jy
! Component: 2600  -  total flux cleaned = 0.00227306 Jy
! Component: 2650  -  total flux cleaned = 0.00229151 Jy
! Component: 2700  -  total flux cleaned = 0.00232744 Jy
! Component: 2750  -  total flux cleaned = 0.00238091 Jy
! Component: 2800  -  total flux cleaned = 0.00234548 Jy
! Component: 2850  -  total flux cleaned = 0.00241565 Jy
! Component: 2900  -  total flux cleaned = 0.00250256 Jy
! Component: 2950  -  total flux cleaned = 0.00251939 Jy
! Component: 3000  -  total flux cleaned = 0.00253672 Jy
! Component: 3050  -  total flux cleaned = 0.0024858 Jy
! Component: 3100  -  total flux cleaned = 0.00251946 Jy
! Component: 3150  -  total flux cleaned = 0.00250275 Jy
! Component: 3200  -  total flux cleaned = 0.00255262 Jy
! Component: 3250  -  total flux cleaned = 0.00255264 Jy
! Component: 3300  -  total flux cleaned = 0.00265068 Jy
! Component: 3350  -  total flux cleaned = 0.00269922 Jy
! Component: 3400  -  total flux cleaned = 0.00269919 Jy
! Component: 3450  -  total flux cleaned = 0.00277898 Jy
! Component: 3500  -  total flux cleaned = 0.00284248 Jy
! Component: 3550  -  total flux cleaned = 0.00282665 Jy
! Component: 3600  -  total flux cleaned = 0.00282661 Jy
! Component: 3650  -  total flux cleaned = 0.00288852 Jy
! Component: 3700  -  total flux cleaned = 0.00284246 Jy
! Component: 3750  -  total flux cleaned = 0.00288844 Jy
! Component: 3800  -  total flux cleaned = 0.00293395 Jy
! Component: 3850  -  total flux cleaned = 0.00290374 Jy
! Component: 3900  -  total flux cleaned = 0.00291876 Jy
! Component: 3950  -  total flux cleaned = 0.00293364 Jy
! Component: 4000  -  total flux cleaned = 0.0029927 Jy
! Component: 4050  -  total flux cleaned = 0.00299254 Jy
! Total flux subtracted in 4096 components = 0.0029925 Jy
! Clean residual min=-0.000970 max=0.000798 Jy/beam
! Clean residual mean=-0.000000 rms=0.000245 Jy/beam
! Combined flux in latest and established models = 0.620283 Jy
keep
! Adding 303 model components to the UV plane model.
! The established model now contains 524 components and 0.620284 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219h_uvs/J1810+5649_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.986 x 1.275 at -12.71 degrees (North through East)
! Clean map  min=-0.0022171  max=0.35613 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1810+5649_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.35613 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000242816 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.204546 0.204546 0.409091 0.818182 1.63636 3.27273 6.54546 13.0909 26.1818 52.3637
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.356 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1466.67 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1810+5649_X_uvs.log closed on Thu Apr  7 12:17:33 2016