! Started logfile: /scr/pima/bg219h_uvs/J1810+5649_X_dfm.log on Thu May 19 22:37:29 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J1810+5649_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1810+5649_X_uva.fits
! AN table 1: 41 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.892141 visibilities/baseline/integration-bin.
! Found source: J1810+5649
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 19752 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1810+5649_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.087109Jy  sigma=23.980948
! Fit after  self-cal, rms=0.646917Jy  sigma=14.106443
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7371 mas, bmaj=0.9737 mas, bpa=-10.11 degrees
! Estimated noise=0.52095 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.267529 Jy
! Component: 100  -  total flux cleaned = 0.336105 Jy
! Total flux subtracted in 100 components = 0.336105 Jy
! Clean residual min=-0.019551 max=0.073113 Jy/beam
! Clean residual mean=-0.000015 rms=0.005147 Jy/beam
! Combined flux in latest and established models = 0.336105 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.336105 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.144056Jy  sigma=2.980503
! Fit after  self-cal, rms=0.144005Jy  sigma=2.979856
! Inverting map 
! Added new window around map position (-1.2, 1.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0623139 Jy
! Component: 100  -  total flux cleaned = 0.0930843 Jy
! Total flux subtracted in 100 components = 0.0930843 Jy
! Clean residual min=-0.011811 max=0.024891 Jy/beam
! Clean residual mean=-0.000012 rms=0.002944 Jy/beam
! Combined flux in latest and established models = 0.429189 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 16 components and 0.429189 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.106022Jy  sigma=2.125031
! Fit after  self-cal, rms=0.103781Jy  sigma=2.077618
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0232551 Jy
! Component: 100  -  total flux cleaned = 0.0398021 Jy
! Total flux subtracted in 100 components = 0.0398021 Jy
! Clean residual min=-0.009935 max=0.016473 Jy/beam
! Clean residual mean=-0.000011 rms=0.002314 Jy/beam
! Combined flux in latest and established models = 0.468991 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 27 components and 0.468991 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.093892Jy  sigma=1.850752
! Fit after  self-cal, rms=0.093726Jy  sigma=1.846234
! Inverting map 
! Added new window around map position (2.2, -2.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0155351 Jy
! Component: 100  -  total flux cleaned = 0.0274716 Jy
! Total flux subtracted in 100 components = 0.0274716 Jy
! Clean residual min=-0.009540 max=0.012395 Jy/beam
! Clean residual mean=-0.000010 rms=0.002011 Jy/beam
! Combined flux in latest and established models = 0.496463 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 33 components and 0.496463 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088489Jy  sigma=1.727113
! Fit after  self-cal, rms=0.088431Jy  sigma=1.725714
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9753 mas, bmaj=1.257 mas, bpa=-13.14 degrees
! Estimated noise=0.241174 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.8, -1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0222175 Jy
! Component: 100  -  total flux cleaned = 0.0384892 Jy
! Component: 150  -  total flux cleaned = 0.0514463 Jy
! Component: 200  -  total flux cleaned = 0.0619063 Jy
! Total flux subtracted in 200 components = 0.0619063 Jy
! Clean residual min=-0.006514 max=0.010349 Jy/beam
! Clean residual mean=-0.000032 rms=0.001880 Jy/beam
! Combined flux in latest and established models = 0.558369 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 65 components and 0.558369 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079832Jy  sigma=1.533427
! Fit after  self-cal, rms=0.079531Jy  sigma=1.526750
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9753 x 1.257 at -13.14 degrees (North through East)
! Clean map  min=-0.0058285  max=0.3558 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.97     HN        1.19     KP        0.97     
!   LA        0.96     MK        1.02     NL        0.99     OV        1.02     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        1.16     KP        0.99     
!   LA        0.95     MK        1.02     NL        0.99     OV        0.99     
!   PT        0.95     SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        1.16     KP        0.98     
!   LA        0.95     MK        1.02     NL        1.01     OV        0.99     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        1.19     KP        0.98     
!   LA        0.95     MK        1.02     NL        0.99     OV        1.00     
!   PT        0.95     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.18     KP        0.97     
!   LA        0.97     MK        1.02     NL        0.99     OV        0.99     
!   PT        0.97     SC        0.97     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        1.14     KP        0.99     
!   LA        0.96     MK        1.01     NL        1.00     OV        1.00     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.18     KP        0.97     
!   LA        0.94     MK        1.02     NL        0.99     OV        1.00     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.18     KP        0.97     
!   LA        0.95     MK        1.03     NL        0.98     OV        0.99     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.17     KP        0.98     
!   LA        0.95     MK        1.02     NL        0.99     OV        1.00     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        1.20     KP        1.01     
!   LA        0.96     MK        1.02     NL        1.01     OV        1.01     
!   PT        0.95     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.079531Jy  sigma=1.526750
! Fit after  self-cal, rms=0.079338Jy  sigma=1.466526
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9844 mas, bmaj=1.268 mas, bpa=-11.92 degrees
! Estimated noise=0.239623 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00732784 Jy
! Component: 100  -  total flux cleaned = 0.0121297 Jy
! Component: 150  -  total flux cleaned = 0.0143244 Jy
! Component: 200  -  total flux cleaned = 0.0151882 Jy
! Total flux subtracted in 200 components = 0.0151882 Jy
! Clean residual min=-0.004489 max=0.006177 Jy/beam
! Clean residual mean=-0.000014 rms=0.001100 Jy/beam
! Combined flux in latest and established models = 0.573557 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 85 components and 0.573557 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078441Jy  sigma=1.445295
! Fit after  self-cal, rms=0.078426Jy  sigma=1.443949
! Inverting map 
! Added new window around map position (4.4, -7.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00577208 Jy
! Component: 100  -  total flux cleaned = 0.00921258 Jy
! Component: 150  -  total flux cleaned = 0.0116433 Jy
! Component: 200  -  total flux cleaned = 0.0128764 Jy
! Total flux subtracted in 200 components = 0.0128764 Jy
! Clean residual min=-0.003552 max=0.004233 Jy/beam
! Clean residual mean=-0.000011 rms=0.000912 Jy/beam
! Combined flux in latest and established models = 0.586434 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 104 components and 0.586434 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077796Jy  sigma=1.430252
! Fit after  self-cal, rms=0.077779Jy  sigma=1.429244
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077779Jy  sigma=1.429244
! Fit after  self-cal, rms=0.077579Jy  sigma=1.413438
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9835 mas, bmaj=1.267 mas, bpa=-12.46 degrees
! Estimated noise=0.239682 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00151783 Jy
! Component: 100  -  total flux cleaned = 0.00294753 Jy
! Component: 150  -  total flux cleaned = 0.0042313 Jy
! Component: 200  -  total flux cleaned = 0.00542331 Jy
! Total flux subtracted in 200 components = 0.00542331 Jy
! Clean residual min=-0.003034 max=0.003087 Jy/beam
! Clean residual mean=-0.000005 rms=0.000726 Jy/beam
! Combined flux in latest and established models = 0.591857 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 115 components and 0.591857 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077336Jy  sigma=1.408551
! Fit after  self-cal, rms=0.077330Jy  sigma=1.408179
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2, -9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00311023 Jy
! Component: 100  -  total flux cleaned = 0.00376189 Jy
! Component: 150  -  total flux cleaned = 0.004391 Jy
! Component: 200  -  total flux cleaned = 0.00502117 Jy
! Total flux subtracted in 200 components = 0.00502117 Jy
! Clean residual min=-0.002795 max=0.002980 Jy/beam
! Clean residual mean=-0.000005 rms=0.000662 Jy/beam
! Combined flux in latest and established models = 0.596879 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 129 components and 0.596879 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077120Jy  sigma=1.404316
! Fit after  self-cal, rms=0.077108Jy  sigma=1.403945
! Inverting map 
! Added new window around map position (6.8, -7.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00269716 Jy
! Component: 100  -  total flux cleaned = 0.00372005 Jy
! Component: 150  -  total flux cleaned = 0.00433439 Jy
! Component: 200  -  total flux cleaned = 0.00489679 Jy
! Total flux subtracted in 200 components = 0.00489679 Jy
! Clean residual min=-0.002527 max=0.002730 Jy/beam
! Clean residual mean=-0.000004 rms=0.000610 Jy/beam
! Combined flux in latest and established models = 0.601775 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 144 components and 0.601775 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076952Jy  sigma=1.401085
! Fit after  self-cal, rms=0.076946Jy  sigma=1.400831
! Inverting map 
! Added new window around map position (0, 21.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00275974 Jy
! Component: 100  -  total flux cleaned = 0.00445445 Jy
! Component: 150  -  total flux cleaned = 0.0055868 Jy
! Component: 200  -  total flux cleaned = 0.00656357 Jy
! Total flux subtracted in 200 components = 0.00656357 Jy
! Clean residual min=-0.002366 max=0.002453 Jy/beam
! Clean residual mean=-0.000004 rms=0.000544 Jy/beam
! Combined flux in latest and established models = 0.608339 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 161 components and 0.608339 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076805Jy  sigma=1.397614
! Fit after  self-cal, rms=0.076801Jy  sigma=1.397466
! Inverting map 
! Added new window around map position (6.8, -1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00220169 Jy
! Component: 100  -  total flux cleaned = 0.00363636 Jy
! Component: 150  -  total flux cleaned = 0.00460695 Jy
! Component: 200  -  total flux cleaned = 0.0051279 Jy
! Total flux subtracted in 200 components = 0.0051279 Jy
! Clean residual min=-0.002206 max=0.002130 Jy/beam
! Clean residual mean=-0.000003 rms=0.000510 Jy/beam
! Combined flux in latest and established models = 0.613467 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 177 components and 0.613467 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076697Jy  sigma=1.395436
! Fit after  self-cal, rms=0.076690Jy  sigma=1.395327
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076690Jy  sigma=1.395327
! Fit after  self-cal, rms=0.076658Jy  sigma=1.394217
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9826 mas, bmaj=1.267 mas, bpa=-12.59 degrees
! Estimated noise=0.239562 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00096374 Jy
! Component: 100  -  total flux cleaned = 0.0018874 Jy
! Component: 150  -  total flux cleaned = 0.00252356 Jy
! Component: 200  -  total flux cleaned = 0.00311165 Jy
! Total flux subtracted in 200 components = 0.00311165 Jy
! Clean residual min=-0.002112 max=0.001994 Jy/beam
! Clean residual mean=-0.000002 rms=0.000487 Jy/beam
! Combined flux in latest and established models = 0.616579 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 185 components and 0.616579 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076584Jy  sigma=1.392843
! Fit after  self-cal, rms=0.076582Jy  sigma=1.392795
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00064473 Jy
! Component: 100  -  total flux cleaned = 0.00119267 Jy
! Component: 150  -  total flux cleaned = 0.00174715 Jy
! Component: 200  -  total flux cleaned = 0.00215854 Jy
! Total flux subtracted in 200 components = 0.00215854 Jy
! Clean residual min=-0.002058 max=0.001926 Jy/beam
! Clean residual mean=-0.000002 rms=0.000471 Jy/beam
! Combined flux in latest and established models = 0.618737 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 191 components and 0.618737 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076538Jy  sigma=1.391968
! Fit after  self-cal, rms=0.076537Jy  sigma=1.391943
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076537Jy  sigma=1.391943
! Fit after  self-cal, rms=0.076519Jy  sigma=1.391786
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.23 mas, bmaj=2.364 mas, bpa=-8.134 degrees
! Estimated noise=0.307998 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00155892 Jy
! Component: 100  -  total flux cleaned = 0.00261952 Jy
! Component: 150  -  total flux cleaned = 0.00311964 Jy
! Component: 200  -  total flux cleaned = 0.00342343 Jy
! Total flux subtracted in 200 components = 0.00342343 Jy
! Clean residual min=-0.002163 max=0.002299 Jy/beam
! Clean residual mean=-0.000002 rms=0.000636 Jy/beam
! Combined flux in latest and established models = 0.622161 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 204 components and 0.622161 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076490Jy  sigma=1.391233
! Fit after  self-cal, rms=0.076488Jy  sigma=1.391194
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000344872 Jy
! Component: 100  -  total flux cleaned = 0.000583021 Jy
! Component: 150  -  total flux cleaned = 0.000802101 Jy
! Component: 200  -  total flux cleaned = 0.00100647 Jy
! Total flux subtracted in 200 components = 0.00100647 Jy
! Clean residual min=-0.002129 max=0.002197 Jy/beam
! Clean residual mean=-0.000002 rms=0.000616 Jy/beam
! Combined flux in latest and established models = 0.623167 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 212 components and 0.623167 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076475Jy  sigma=1.390946
! Fit after  self-cal, rms=0.076473Jy  sigma=1.390924
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9823 mas, bmaj=1.268 mas, bpa=-12.71 degrees
! Estimated noise=0.239574 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9823 x 1.268 at -12.71 degrees (North through East)
! Clean map  min=-0.0017536  max=0.35104 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7402 mas, bmaj=0.9799 mas, bpa=-9.615 degrees
! Estimated noise=0.521254 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.267074 Jy
! Component: 100  -  total flux cleaned = 0.352404 Jy
! Component: 150  -  total flux cleaned = 0.399987 Jy
! Component: 200  -  total flux cleaned = 0.429758 Jy
! Total flux subtracted in 200 components = 0.429758 Jy
! Clean residual min=-0.009531 max=0.015857 Jy/beam
! Clean residual mean=-0.000009 rms=0.002409 Jy/beam
! Combined flux in latest and established models = 0.429758 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.429758 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9823 mas, bmaj=1.268 mas, bpa=-12.71 degrees
! Estimated noise=0.239574 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0339465 Jy
! Component: 100  -  total flux cleaned = 0.0577168 Jy
! Component: 150  -  total flux cleaned = 0.075579 Jy
! Component: 200  -  total flux cleaned = 0.0895988 Jy
! Total flux subtracted in 200 components = 0.0895988 Jy
! Clean residual min=-0.005407 max=0.008936 Jy/beam
! Clean residual mean=-0.000024 rms=0.001806 Jy/beam
! Combined flux in latest and established models = 0.519356 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 54 components and 0.519356 Jy
! Inverting map 
! Added new window around map position (0.8, 0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0114536 Jy
! Component: 100  -  total flux cleaned = 0.0208256 Jy
! Component: 150  -  total flux cleaned = 0.0285642 Jy
! Component: 200  -  total flux cleaned = 0.0351481 Jy
! Total flux subtracted in 200 components = 0.0351481 Jy
! Clean residual min=-0.003554 max=0.005071 Jy/beam
! Clean residual mean=-0.000015 rms=0.001152 Jy/beam
! Combined flux in latest and established models = 0.554505 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 87 components and 0.554504 Jy
! Inverting map 
! Added new window around map position (11.2, -37).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00597916 Jy
! Component: 100  -  total flux cleaned = 0.0111116 Jy
! Component: 150  -  total flux cleaned = 0.0157068 Jy
! Component: 200  -  total flux cleaned = 0.0198503 Jy
! Total flux subtracted in 200 components = 0.0198503 Jy
! Clean residual min=-0.002855 max=0.003496 Jy/beam
! Clean residual mean=-0.000011 rms=0.000862 Jy/beam
! Combined flux in latest and established models = 0.574355 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 120 components and 0.574355 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.23 mas, bmaj=2.364 mas, bpa=-8.134 degrees
! Estimated noise=0.307998 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00755706 Jy
! Component: 100  -  total flux cleaned = 0.0134151 Jy
! Component: 150  -  total flux cleaned = 0.0182204 Jy
! Component: 200  -  total flux cleaned = 0.0223131 Jy
! Total flux subtracted in 200 components = 0.0223131 Jy
! Clean residual min=-0.003401 max=0.003463 Jy/beam
! Clean residual mean=-0.000013 rms=0.001040 Jy/beam
! Combined flux in latest and established models = 0.596668 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00352708 Jy
! Component: 100  -  total flux cleaned = 0.00660059 Jy
! Component: 150  -  total flux cleaned = 0.00929812 Jy
! Component: 200  -  total flux cleaned = 0.0116724 Jy
! Total flux subtracted in 200 components = 0.0116724 Jy
! Clean residual min=-0.002843 max=0.002551 Jy/beam
! Clean residual mean=-0.000008 rms=0.000776 Jy/beam
! Combined flux in latest and established models = 0.60834 Jy
! Adding 109 model components to the UV plane model.
! The established model now contains 210 components and 0.60834 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9823 mas, bmaj=1.268 mas, bpa=-12.71 degrees
! Estimated noise=0.239574 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00210463 Jy
! Component: 100  -  total flux cleaned = 0.00373111 Jy
! Component: 150  -  total flux cleaned = 0.00499911 Jy
! Component: 200  -  total flux cleaned = 0.00591603 Jy
! Total flux subtracted in 200 components = 0.00591603 Jy
! Clean residual min=-0.002310 max=0.002243 Jy/beam
! Clean residual mean=-0.000002 rms=0.000493 Jy/beam
! Combined flux in latest and established models = 0.614256 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 237 components and 0.614256 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076724Jy  sigma=1.394751
! Fit after  self-cal, rms=0.076663Jy  sigma=1.393682
wmodel /J1810+5649_X_map.mod
! wmodel: Unable to open new model file: /J1810+5649_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1810+5649_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9823 x 1.268 at -12.71 degrees (North through East)
! Clean map  min=-0.0019689  max=0.35615 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1810+5649_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.356148 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000483243 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.407058 0.407058 0.814117 1.62823 3.25647 6.51293 13.0259 26.0517 52.1035
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0014 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.356 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  736.995 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1810+5649_X_dfm.log closed on Thu May 19 22:37:33 2016