! Started logfile: /scr/pima/bg219h_uvs/J1759-1505_X_dfm.log on Thu May 19 22:36:56 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J1759-1505_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1759-1505_X_uva.fits
! AN table 1: 62 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.410138 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1759-1505
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 6408 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1759-1505_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 179 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 179 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 179 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 179 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 179 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 179 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 179 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 179 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 179 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 179 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 179 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 179 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006386Jy  sigma=24.966873
! Fit after  self-cal, rms=0.957648Jy  sigma=23.228452
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.856 mas, bmaj=6.759 mas, bpa=23 degrees
! Estimated noise=0.53229 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0325928 Jy
! Component: 100  -  total flux cleaned = 0.0402519 Jy
! Total flux subtracted in 100 components = 0.0402519 Jy
! Clean residual min=-0.003709 max=0.003738 Jy/beam
! Clean residual mean=-0.000004 rms=0.001318 Jy/beam
! Combined flux in latest and established models = 0.0402519 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.0402519 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.046324Jy  sigma=1.084633
! Fit after  self-cal, rms=0.044683Jy  sigma=1.043840
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.321 mas, bmaj=6.449 mas, bpa=17.74 degrees
! Estimated noise=0.44341 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00435739 Jy
! Component: 100  -  total flux cleaned = 0.00451141 Jy
! Component: 150  -  total flux cleaned = 0.00501816 Jy
! Component: 200  -  total flux cleaned = 0.00503431 Jy
! Total flux subtracted in 200 components = 0.00503431 Jy
! Clean residual min=-0.001269 max=0.001273 Jy/beam
! Clean residual mean=0.000001 rms=0.000528 Jy/beam
! Combined flux in latest and established models = 0.0452862 Jy
! Performing phase self-cal
! Adding 76 model components to the UV plane model.
! The established model now contains 88 components and 0.0452862 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.043686Jy  sigma=1.020516
! Fit after  self-cal, rms=0.043561Jy  sigma=1.017953
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.321 x 6.449 at 17.74 degrees (North through East)
! Clean map  min=-0.0035424  max=0.041707 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.86     FD        1.01     KP        0.96     LA        1.13     
!   NL        1.00*    OV        1.14     PT        0.96     
! 
! 
! Correcting IF 2.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.17     FD        0.92     KP        1.00     LA        1.05     
!   NL        1.00*    OV        0.98     PT        0.93     
! 
! 
! Correcting IF 3.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.95     KP        0.94     LA        1.18     
!   NL        1.00*    OV        1.04     PT        0.95     
! 
! 
! Correcting IF 4.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.97     KP        1.04     LA        1.06     
!   NL        1.00*    OV        0.92     PT        0.98     
! 
! 
! Correcting IF 5.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     KP        1.01     LA        1.14     
!   NL        1.00*    OV        1.08     PT        0.91     
! 
! 
! Correcting IF 6.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 7.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        0.85     KP        1.09     LA        0.93     
!   NL        1.00*    OV        0.95     PT        0.93     
! 
! 
! Correcting IF 8.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.92     KP        1.10     LA        0.92     
!   NL        1.00*    OV        0.99     PT        1.01     
! 
! 
! Correcting IF 9.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.08     KP        0.96     LA        0.90     
!   NL        1.00*    OV        1.18     PT        0.92     
! 
! 
! Correcting IF 10.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.95     KP        1.01     LA        1.17     
!   NL        1.00*    OV        1.12     PT        0.97     
! 
! 
! Correcting IF 11.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.94     KP        0.99     LA        0.99     
!   NL        1.00*    OV        1.01     PT        0.90     
! 
! 
! Correcting IF 12.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        0.93     KP        1.02     LA        0.86     
!   NL        1.00*    OV        1.10     PT        0.84     
! 
! 
! Fit before self-cal, rms=0.043561Jy  sigma=1.017953
! Fit after  self-cal, rms=0.042652Jy  sigma=1.015269
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.443 mas, bmaj=6.291 mas, bpa=17.78 degrees
! Estimated noise=0.449993 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000678614 Jy
! Component: 100  -  total flux cleaned = 0.000748136 Jy
! Component: 150  -  total flux cleaned = 0.000829865 Jy
! Component: 200  -  total flux cleaned = 0.000799129 Jy
! Total flux subtracted in 200 components = 0.000799129 Jy
! Clean residual min=-0.000495 max=0.000498 Jy/beam
! Clean residual mean=0.000001 rms=0.000187 Jy/beam
! Combined flux in latest and established models = 0.0460854 Jy
! Performing phase self-cal
! Adding 64 model components to the UV plane model.
! The established model now contains 150 components and 0.0460854 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.042527Jy  sigma=1.012427
! Fit after  self-cal, rms=0.042591Jy  sigma=1.009979
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.042591Jy  sigma=1.009979
! Fit after  self-cal, rms=0.042975Jy  sigma=1.007392
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.434 mas, bmaj=6.324 mas, bpa=17.69 degrees
! Estimated noise=0.44818 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000870807 Jy
! Component: 100  -  total flux cleaned = 0.00128358 Jy
! Component: 150  -  total flux cleaned = 0.00114802 Jy
! Component: 200  -  total flux cleaned = 0.00105275 Jy
! Total flux subtracted in 200 components = 0.00105275 Jy
! Clean residual min=-0.000359 max=0.000360 Jy/beam
! Clean residual mean=0.000001 rms=0.000139 Jy/beam
! Combined flux in latest and established models = 0.0471381 Jy
selfcal
! Performing phase self-cal
! Adding 67 model components to the UV plane model.
! The established model now contains 214 components and 0.0471381 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.042921Jy  sigma=1.006155
! Fit after  self-cal, rms=0.043035Jy  sigma=1.004944
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000329289 Jy
! Component: 100  -  total flux cleaned = 0.000252771 Jy
! Component: 150  -  total flux cleaned = -2.44152e-05 Jy
! Component: 200  -  total flux cleaned = -0.000291385 Jy
! Total flux subtracted in 200 components = -0.000291385 Jy
! Clean residual min=-0.000329 max=0.000321 Jy/beam
! Clean residual mean=0.000001 rms=0.000123 Jy/beam
! Combined flux in latest and established models = 0.0468467 Jy
! Performing phase self-cal
! Adding 65 model components to the UV plane model.
! The established model now contains 269 components and 0.0468467 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.043001Jy  sigma=1.004265
! Fit after  self-cal, rms=0.043013Jy  sigma=1.003763
! Inverting map 
! Added new window around map position (-9.4, 26.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000307066 Jy
! Component: 100  -  total flux cleaned = 0.000455417 Jy
! Component: 150  -  total flux cleaned = 0.000556394 Jy
! Component: 200  -  total flux cleaned = 0.000666936 Jy
! Total flux subtracted in 200 components = 0.000666936 Jy
! Clean residual min=-0.000421 max=0.000456 Jy/beam
! Clean residual mean=0.000002 rms=0.000142 Jy/beam
! Combined flux in latest and established models = 0.0475137 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 310 components and 0.0475137 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.043001Jy  sigma=1.003503
! Fit after  self-cal, rms=0.043009Jy  sigma=1.003281
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.043009Jy  sigma=1.003281
! Fit after  self-cal, rms=0.043163Jy  sigma=1.002728
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.426 mas, bmaj=6.329 mas, bpa=17.67 degrees
! Estimated noise=0.444947 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000331446 Jy
! Component: 100  -  total flux cleaned = 0.000531747 Jy
! Component: 150  -  total flux cleaned = 0.000601875 Jy
! Component: 200  -  total flux cleaned = 0.000623186 Jy
! Total flux subtracted in 200 components = 0.000623186 Jy
! Clean residual min=-0.000490 max=0.000573 Jy/beam
! Clean residual mean=0.000002 rms=0.000158 Jy/beam
! Combined flux in latest and established models = 0.0481369 Jy
selfcal
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 351 components and 0.0481369 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.043152Jy  sigma=1.002541
! Fit after  self-cal, rms=0.043239Jy  sigma=1.002241
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000349756 Jy
! Component: 100  -  total flux cleaned = 0.000441367 Jy
! Component: 150  -  total flux cleaned = 0.000485952 Jy
! Component: 200  -  total flux cleaned = 0.000517019 Jy
! Total flux subtracted in 200 components = 0.000517019 Jy
! Clean residual min=-0.000549 max=0.000611 Jy/beam
! Clean residual mean=0.000002 rms=0.000161 Jy/beam
! Combined flux in latest and established models = 0.0486539 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 378 components and 0.0486539 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.043230Jy  sigma=1.002083
! Fit after  self-cal, rms=0.043252Jy  sigma=1.001799
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.043252Jy  sigma=1.001799
! Fit after  self-cal, rms=0.043353Jy  sigma=1.001620
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.53 mas, bmaj=6.443 mas, bpa=16.64 degrees
! Estimated noise=0.444225 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000310394 Jy
! Component: 100  -  total flux cleaned = 0.000517149 Jy
! Component: 150  -  total flux cleaned = 0.000678072 Jy
! Component: 200  -  total flux cleaned = 0.00077591 Jy
! Total flux subtracted in 200 components = 0.00077591 Jy
! Clean residual min=-0.000522 max=0.000637 Jy/beam
! Clean residual mean=0.000002 rms=0.000155 Jy/beam
! Combined flux in latest and established models = 0.0494298 Jy
selfcal
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 406 components and 0.0494298 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.043342Jy  sigma=1.001436
! Fit after  self-cal, rms=0.043356Jy  sigma=1.000949
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000289912 Jy
! Component: 100  -  total flux cleaned = 0.000431718 Jy
! Component: 150  -  total flux cleaned = 0.000511332 Jy
! Component: 200  -  total flux cleaned = 0.000555052 Jy
! Total flux subtracted in 200 components = 0.000555052 Jy
! Clean residual min=-0.000526 max=0.000566 Jy/beam
! Clean residual mean=0.000002 rms=0.000156 Jy/beam
! Combined flux in latest and established models = 0.0499849 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 429 components and 0.0499848 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.043349Jy  sigma=1.000815
! Fit after  self-cal, rms=0.043353Jy  sigma=1.000575
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.427 mas, bmaj=6.32 mas, bpa=17.67 degrees
! Estimated noise=0.443418 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.427 x 6.32 at 17.67 degrees (North through East)
! Clean map  min=-0.002278  max=0.04039 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.844 mas, bmaj=6.836 mas, bpa=22.78 degrees
! Estimated noise=0.532201 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0164837 Jy
! Component: 100  -  total flux cleaned = 0.0173224 Jy
! Component: 150  -  total flux cleaned = 0.0161197 Jy
! Component: 200  -  total flux cleaned = 0.0163632 Jy
! Total flux subtracted in 200 components = 0.0163632 Jy
! Clean residual min=-0.015607 max=0.028926 Jy/beam
! Clean residual mean=-0.000071 rms=0.006002 Jy/beam
! Combined flux in latest and established models = 0.0163633 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.0163633 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.427 mas, bmaj=6.32 mas, bpa=17.67 degrees
! Estimated noise=0.443418 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.2, -0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0210961 Jy
! Component: 100  -  total flux cleaned = 0.0228356 Jy
! Component: 150  -  total flux cleaned = 0.024962 Jy
! Component: 200  -  total flux cleaned = 0.0259851 Jy
! Total flux subtracted in 200 components = 0.0259851 Jy
! Clean residual min=-0.005457 max=0.006376 Jy/beam
! Clean residual mean=0.000002 rms=0.001941 Jy/beam
! Combined flux in latest and established models = 0.0423484 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 64 components and 0.0423484 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.53 mas, bmaj=6.443 mas, bpa=16.64 degrees
! Estimated noise=0.444225 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000321564 Jy
! Component: 100  -  total flux cleaned = 0.00125349 Jy
! Component: 150  -  total flux cleaned = 0.00218686 Jy
! Component: 200  -  total flux cleaned = 0.00288877 Jy
! Total flux subtracted in 200 components = 0.00288877 Jy
! Clean residual min=-0.004261 max=0.004443 Jy/beam
! Clean residual mean=0.000008 rms=0.001412 Jy/beam
! Combined flux in latest and established models = 0.0452372 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000614381 Jy
! Component: 100  -  total flux cleaned = 0.00079584 Jy
! Component: 150  -  total flux cleaned = 0.000629266 Jy
! Component: 200  -  total flux cleaned = 0.000484458 Jy
! Total flux subtracted in 200 components = 0.000484458 Jy
! Clean residual min=-0.003736 max=0.003551 Jy/beam
! Clean residual mean=0.000010 rms=0.001139 Jy/beam
! Combined flux in latest and established models = 0.0457216 Jy
! Adding 89 model components to the UV plane model.
! The established model now contains 142 components and 0.0457216 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.427 mas, bmaj=6.32 mas, bpa=17.67 degrees
! Estimated noise=0.443418 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.47384e-05 Jy
! Component: 100  -  total flux cleaned = -4.39483e-05 Jy
! Component: 150  -  total flux cleaned = -0.000385447 Jy
! Component: 200  -  total flux cleaned = -0.000750028 Jy
! Total flux subtracted in 200 components = -0.000750028 Jy
! Clean residual min=-0.003360 max=0.003003 Jy/beam
! Clean residual mean=0.000012 rms=0.000955 Jy/beam
! Combined flux in latest and established models = 0.0449716 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 171 components and 0.0449716 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.043861Jy  sigma=1.013536
! Fit after  self-cal, rms=0.043689Jy  sigma=1.008481
wmodel /J1759-1505_X_map.mod
! wmodel: Unable to open new model file: /J1759-1505_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1759-1505_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.427 x 6.32 at 17.67 degrees (North through East)
! Clean map  min=-0.0048034  max=0.033509 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1759-1505_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0335091 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000706371 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -6.324 6.324 12.648 25.296 50.592
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0021 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.033 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  47.438 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1759-1505_X_dfm.log closed on Thu May 19 22:36:59 2016