! Started logfile: /scr/pima/bg219h_uvs/J1755-2232_X_uvs.log on Thu Apr  7 12:17:05 2016
obs /scr/pima/bg219h_uvs/J1755-2232_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1755-2232_X_uva.fits
! AN table 1: 62 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.74552 visibilities/baseline/integration-bin.
! Found source: J1755-2232
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 24960 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219h_uvs/J1755-2232_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.017170Jy  sigma=23.182176
! Fit after  self-cal, rms=0.853200Jy  sigma=19.191921
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8208 mas, bmaj=2.033 mas, bpa=-13.2 degrees
! Estimated noise=0.490343 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.102119 Jy
! Component: 100  -  total flux cleaned = 0.155983 Jy
! Total flux subtracted in 100 components = 0.155983 Jy
! Clean residual min=-0.011229 max=0.027421 Jy/beam
! Clean residual mean=-0.000083 rms=0.003790 Jy/beam
! Combined flux in latest and established models = 0.155983 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.155983 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.097396Jy  sigma=2.149163
! Fit after  self-cal, rms=0.096486Jy  sigma=2.136526
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0334969 Jy
! Component: 100  -  total flux cleaned = 0.0552526 Jy
! Total flux subtracted in 100 components = 0.0552526 Jy
! Clean residual min=-0.007110 max=0.012634 Jy/beam
! Clean residual mean=-0.000044 rms=0.002111 Jy/beam
! Combined flux in latest and established models = 0.211235 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 50 components and 0.211235 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.075933Jy  sigma=1.601937
! Fit after  self-cal, rms=0.075703Jy  sigma=1.599729
! Inverting map 
! Added new window around map position (1, -0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0157424 Jy
! Component: 100  -  total flux cleaned = 0.026934 Jy
! Total flux subtracted in 100 components = 0.026934 Jy
! Clean residual min=-0.005273 max=0.007828 Jy/beam
! Clean residual mean=-0.000025 rms=0.001455 Jy/beam
! Combined flux in latest and established models = 0.238169 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 66 components and 0.238169 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.069934Jy  sigma=1.449031
! Fit after  self-cal, rms=0.069898Jy  sigma=1.448223
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.029 mas, bmaj=2.444 mas, bpa=-9.773 degrees
! Estimated noise=0.281883 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.013785 Jy
! Component: 100  -  total flux cleaned = 0.0217363 Jy
! Component: 150  -  total flux cleaned = 0.0265562 Jy
! Component: 200  -  total flux cleaned = 0.0295522 Jy
! Total flux subtracted in 200 components = 0.0295522 Jy
! Clean residual min=-0.002794 max=0.004990 Jy/beam
! Clean residual mean=-0.000010 rms=0.000710 Jy/beam
! Combined flux in latest and established models = 0.267722 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 91 components and 0.267721 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.067215Jy  sigma=1.376016
! Fit after  self-cal, rms=0.067141Jy  sigma=1.375092
! Inverting map 
! Added new window around map position (-1.6, 0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00374196 Jy
! Component: 100  -  total flux cleaned = 0.0057994 Jy
! Component: 150  -  total flux cleaned = 0.007008 Jy
! Component: 200  -  total flux cleaned = 0.00754278 Jy
! Total flux subtracted in 200 components = 0.00754278 Jy
! Clean residual min=-0.002146 max=0.002529 Jy/beam
! Clean residual mean=-0.000004 rms=0.000557 Jy/beam
! Combined flux in latest and established models = 0.275264 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 110 components and 0.275264 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.066889Jy  sigma=1.370160
! Fit after  self-cal, rms=0.066881Jy  sigma=1.369870
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.029 x 2.444 at -9.773 degrees (North through East)
! Clean map  min=-0.0019582  max=0.14006 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.10     KP        0.99     
!   LA        1.02     MK        1.13     NL        1.01     OV        1.00     
!   PT        1.00     SC        1.15     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.10     KP        0.97     
!   LA        1.01     MK        1.03     NL        1.03     OV        1.00     
!   PT        0.99     SC        1.09     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.07     KP        0.97     
!   LA        1.02     MK        0.98     NL        0.98     OV        1.00     
!   PT        1.01     SC        1.02     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.15     KP        0.98     
!   LA        1.04     MK        0.96     NL        0.99     OV        1.00     
!   PT        1.01     SC        0.92     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        0.99     KP        0.98     
!   LA        1.03     MK        0.97     NL        0.98     OV        0.99     
!   PT        1.00     SC        1.05     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.066881Jy  sigma=1.369870
! Fit after  self-cal, rms=0.068725Jy  sigma=1.365547
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.033 mas, bmaj=2.459 mas, bpa=-10.07 degrees
! Estimated noise=0.285168 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000512314 Jy
! Component: 100  -  total flux cleaned = 0.000569315 Jy
! Component: 150  -  total flux cleaned = 0.00062107 Jy
! Component: 200  -  total flux cleaned = 0.000645419 Jy
! Total flux subtracted in 200 components = 0.000645419 Jy
! Clean residual min=-0.001795 max=0.001773 Jy/beam
! Clean residual mean=-0.000005 rms=0.000447 Jy/beam
! Combined flux in latest and established models = 0.27591 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 121 components and 0.27591 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.068700Jy  sigma=1.365117
! Fit after  self-cal, rms=0.068721Jy  sigma=1.365051
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.068721Jy  sigma=1.365051
! Fit after  self-cal, rms=0.069306Jy  sigma=1.363847
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.034 mas, bmaj=2.464 mas, bpa=-10.14 degrees
! Estimated noise=0.286423 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000205383 Jy
! Component: 100  -  total flux cleaned = 0.000154537 Jy
! Component: 150  -  total flux cleaned = 6.57366e-05 Jy
! Component: 200  -  total flux cleaned = 4.58612e-05 Jy
! Total flux subtracted in 200 components = 4.58612e-05 Jy
! Clean residual min=-0.001777 max=0.001813 Jy/beam
! Clean residual mean=-0.000005 rms=0.000438 Jy/beam
! Combined flux in latest and established models = 0.275956 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 128 components and 0.275956 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.069288Jy  sigma=1.363522
! Fit after  self-cal, rms=0.069299Jy  sigma=1.363487
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.07459e-06 Jy
! Component: 100  -  total flux cleaned = -1.34234e-05 Jy
! Component: 150  -  total flux cleaned = 4.28773e-06 Jy
! Component: 200  -  total flux cleaned = 2.08063e-05 Jy
! Total flux subtracted in 200 components = 2.08063e-05 Jy
! Clean residual min=-0.001773 max=0.001820 Jy/beam
! Clean residual mean=-0.000005 rms=0.000434 Jy/beam
! Combined flux in latest and established models = 0.275976 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 131 components and 0.275976 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.069289Jy  sigma=1.363306
! Fit after  self-cal, rms=0.069282Jy  sigma=1.363293
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.069282Jy  sigma=1.363293
! Fit after  self-cal, rms=0.069525Jy  sigma=1.362641
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.032 mas, bmaj=2.469 mas, bpa=-10.23 degrees
! Estimated noise=0.286602 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000160481 Jy
! Component: 100  -  total flux cleaned = 0.00014271 Jy
! Component: 150  -  total flux cleaned = 0.000142641 Jy
! Component: 200  -  total flux cleaned = 0.000142684 Jy
! Total flux subtracted in 200 components = 0.000142684 Jy
! Clean residual min=-0.001723 max=0.001843 Jy/beam
! Clean residual mean=-0.000005 rms=0.000423 Jy/beam
! Combined flux in latest and established models = 0.276119 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 141 components and 0.276119 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.069515Jy  sigma=1.362480
! Fit after  self-cal, rms=0.069514Jy  sigma=1.362466
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (33, 2.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00160911 Jy
! Component: 100  -  total flux cleaned = 0.00233462 Jy
! Component: 150  -  total flux cleaned = 0.00273408 Jy
! Component: 200  -  total flux cleaned = 0.00303642 Jy
! Total flux subtracted in 200 components = 0.00303642 Jy
! Clean residual min=-0.001714 max=0.001551 Jy/beam
! Clean residual mean=-0.000003 rms=0.000396 Jy/beam
! Combined flux in latest and established models = 0.279155 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 156 components and 0.279155 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.069480Jy  sigma=1.361498
! Fit after  self-cal, rms=0.069479Jy  sigma=1.361401
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.069479Jy  sigma=1.361401
! Fit after  self-cal, rms=0.069584Jy  sigma=1.361360
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.222 mas, bmaj=4.892 mas, bpa=-0.6356 degrees
! Estimated noise=0.345681 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00053341 Jy
! Component: 100  -  total flux cleaned = 0.000621723 Jy
! Component: 150  -  total flux cleaned = 0.00072888 Jy
! Component: 200  -  total flux cleaned = 0.000795902 Jy
! Total flux subtracted in 200 components = 0.000795902 Jy
! Clean residual min=-0.001536 max=0.001874 Jy/beam
! Clean residual mean=-0.000004 rms=0.000443 Jy/beam
! Combined flux in latest and established models = 0.279951 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 166 components and 0.279951 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.069581Jy  sigma=1.361272
! Fit after  self-cal, rms=0.069578Jy  sigma=1.361248
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000103231 Jy
! Component: 100  -  total flux cleaned = 0.000164586 Jy
! Component: 150  -  total flux cleaned = 0.000186664 Jy
! Component: 200  -  total flux cleaned = 0.000217846 Jy
! Total flux subtracted in 200 components = 0.000217846 Jy
! Clean residual min=-0.001463 max=0.001816 Jy/beam
! Clean residual mean=-0.000004 rms=0.000436 Jy/beam
! Combined flux in latest and established models = 0.280169 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 175 components and 0.280169 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.069577Jy  sigma=1.361222
! Fit after  self-cal, rms=0.069575Jy  sigma=1.361212
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.032 mas, bmaj=2.473 mas, bpa=-10.28 degrees
! Estimated noise=0.286962 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.032 x 2.473 at -10.28 degrees (North through East)
! Clean map  min=-0.0015122  max=0.14247 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8206 mas, bmaj=2.052 mas, bpa=-13.58 degrees
! Estimated noise=0.501866 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.104376 Jy
! Component: 100  -  total flux cleaned = 0.160109 Jy
! Component: 150  -  total flux cleaned = 0.193347 Jy
! Component: 200  -  total flux cleaned = 0.214707 Jy
! Total flux subtracted in 200 components = 0.214707 Jy
! Clean residual min=-0.007218 max=0.011855 Jy/beam
! Clean residual mean=-0.000043 rms=0.002076 Jy/beam
! Combined flux in latest and established models = 0.214707 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 53 model components to the UV plane model.
! The established model now contains 53 components and 0.214707 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.032 mas, bmaj=2.473 mas, bpa=-10.28 degrees
! Estimated noise=0.286962 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0236324 Jy
! Component: 100  -  total flux cleaned = 0.0372691 Jy
! Component: 150  -  total flux cleaned = 0.0456032 Jy
! Component: 200  -  total flux cleaned = 0.0507569 Jy
! Total flux subtracted in 200 components = 0.0507569 Jy
! Clean residual min=-0.002365 max=0.002712 Jy/beam
! Clean residual mean=-0.000014 rms=0.000641 Jy/beam
! Combined flux in latest and established models = 0.265464 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 80 components and 0.265464 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.222 mas, bmaj=4.892 mas, bpa=-0.6356 degrees
! Estimated noise=0.345681 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0045877 Jy
! Component: 100  -  total flux cleaned = 0.00707814 Jy
! Component: 150  -  total flux cleaned = 0.00887836 Jy
! Component: 200  -  total flux cleaned = 0.0102424 Jy
! Total flux subtracted in 200 components = 0.0102424 Jy
! Clean residual min=-0.001805 max=0.002237 Jy/beam
! Clean residual mean=-0.000010 rms=0.000520 Jy/beam
! Combined flux in latest and established models = 0.275706 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (24.2, 39.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0018713 Jy
! Component: 100  -  total flux cleaned = 0.00285058 Jy
! Component: 150  -  total flux cleaned = 0.00340356 Jy
! Component: 200  -  total flux cleaned = 0.00381232 Jy
! Total flux subtracted in 200 components = 0.00381232 Jy
! Clean residual min=-0.001435 max=0.001454 Jy/beam
! Clean residual mean=-0.000006 rms=0.000409 Jy/beam
! Combined flux in latest and established models = 0.279519 Jy
! Adding 64 model components to the UV plane model.
! The established model now contains 137 components and 0.279519 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.032 mas, bmaj=2.473 mas, bpa=-10.28 degrees
! Estimated noise=0.286962 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000394823 Jy
! Component: 100  -  total flux cleaned = 0.000603177 Jy
! Component: 150  -  total flux cleaned = 0.000749796 Jy
! Component: 200  -  total flux cleaned = 0.000816192 Jy
! Total flux subtracted in 200 components = 0.000816192 Jy
! Clean residual min=-0.001488 max=0.001456 Jy/beam
! Clean residual mean=-0.000003 rms=0.000369 Jy/beam
! Combined flux in latest and established models = 0.280335 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 167 components and 0.280335 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.069555Jy  sigma=1.360772
! Fit after  self-cal, rms=0.069549Jy  sigma=1.360484
wmodel /scr/pima/bg219h_uvs/J1755-2232_X_map.mod
! Writing 167 model components to file: /scr/pima/bg219h_uvs/J1755-2232_X_map.mod
wobs /scr/pima/bg219h_uvs/J1755-2232_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219h_uvs/J1755-2232_X_uvs.fits
wwins /scr/pima/bg219h_uvs/J1755-2232_X_map.win
! wwins: Wrote 5 windows to /scr/pima/bg219h_uvs/J1755-2232_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000284126 Jy
! Component: 100  -  total flux cleaned = -0.000385076 Jy
! Component: 150  -  total flux cleaned = -0.000578473 Jy
! Component: 200  -  total flux cleaned = -0.000810693 Jy
! Component: 250  -  total flux cleaned = -0.00092302 Jy
! Component: 300  -  total flux cleaned = -0.00103244 Jy
! Component: 350  -  total flux cleaned = -0.00109703 Jy
! Component: 400  -  total flux cleaned = -0.0012854 Jy
! Component: 450  -  total flux cleaned = -0.00146801 Jy
! Component: 500  -  total flux cleaned = -0.00154722 Jy
! Component: 550  -  total flux cleaned = -0.00162521 Jy
! Component: 600  -  total flux cleaned = -0.00175899 Jy
! Component: 650  -  total flux cleaned = -0.00183396 Jy
! Component: 700  -  total flux cleaned = -0.00194406 Jy
! Component: 750  -  total flux cleaned = -0.00207003 Jy
! Component: 800  -  total flux cleaned = -0.00215855 Jy
! Component: 850  -  total flux cleaned = -0.00226253 Jy
! Component: 900  -  total flux cleaned = -0.00226231 Jy
! Component: 950  -  total flux cleaned = -0.00227897 Jy
! Component: 1000  -  total flux cleaned = -0.002345 Jy
! Component: 1050  -  total flux cleaned = -0.002329 Jy
! Component: 1100  -  total flux cleaned = -0.00244122 Jy
! Component: 1150  -  total flux cleaned = -0.00250433 Jy
! Component: 1200  -  total flux cleaned = -0.00253546 Jy
! Component: 1250  -  total flux cleaned = -0.00256637 Jy
! Component: 1300  -  total flux cleaned = -0.00261232 Jy
! Component: 1350  -  total flux cleaned = -0.00273201 Jy
! Component: 1400  -  total flux cleaned = -0.00276151 Jy
! Component: 1450  -  total flux cleaned = -0.00283415 Jy
! Component: 1500  -  total flux cleaned = -0.00283411 Jy
! Component: 1550  -  total flux cleaned = -0.0028766 Jy
! Component: 1600  -  total flux cleaned = -0.00293292 Jy
! Component: 1650  -  total flux cleaned = -0.0028494 Jy
! Component: 1700  -  total flux cleaned = -0.00284939 Jy
! Component: 1750  -  total flux cleaned = -0.00284923 Jy
! Component: 1800  -  total flux cleaned = -0.00282222 Jy
! Component: 1850  -  total flux cleaned = -0.00286206 Jy
! Component: 1900  -  total flux cleaned = -0.00282259 Jy
! Component: 1950  -  total flux cleaned = -0.00282258 Jy
! Component: 2000  -  total flux cleaned = -0.00280954 Jy
! Component: 2050  -  total flux cleaned = -0.00277116 Jy
! Component: 2100  -  total flux cleaned = -0.00273331 Jy
! Component: 2150  -  total flux cleaned = -0.00272081 Jy
! Component: 2200  -  total flux cleaned = -0.00267134 Jy
! Component: 2250  -  total flux cleaned = -0.00267138 Jy
! Component: 2300  -  total flux cleaned = -0.00268364 Jy
! Component: 2350  -  total flux cleaned = -0.00264786 Jy
! Component: 2400  -  total flux cleaned = -0.00264777 Jy
! Component: 2450  -  total flux cleaned = -0.00263613 Jy
! Component: 2500  -  total flux cleaned = -0.00264804 Jy
! Component: 2550  -  total flux cleaned = -0.00263634 Jy
! Component: 2600  -  total flux cleaned = -0.00267075 Jy
! Component: 2650  -  total flux cleaned = -0.00269352 Jy
! Component: 2700  -  total flux cleaned = -0.00268195 Jy
! Component: 2750  -  total flux cleaned = -0.00269326 Jy
! Component: 2800  -  total flux cleaned = -0.00269334 Jy
! Component: 2850  -  total flux cleaned = -0.00272644 Jy
! Component: 2900  -  total flux cleaned = -0.00273734 Jy
! Component: 2950  -  total flux cleaned = -0.00274815 Jy
! Component: 3000  -  total flux cleaned = -0.00276965 Jy
! Component: 3050  -  total flux cleaned = -0.0027483 Jy
! Component: 3100  -  total flux cleaned = -0.00274811 Jy
! Component: 3150  -  total flux cleaned = -0.00276921 Jy
! Component: 3200  -  total flux cleaned = -0.00276905 Jy
! Component: 3250  -  total flux cleaned = -0.00278985 Jy
! Component: 3300  -  total flux cleaned = -0.00280027 Jy
! Component: 3350  -  total flux cleaned = -0.00283113 Jy
! Component: 3400  -  total flux cleaned = -0.0027903 Jy
! Component: 3450  -  total flux cleaned = -0.00282078 Jy
! Component: 3500  -  total flux cleaned = -0.00281072 Jy
! Component: 3550  -  total flux cleaned = -0.00283073 Jy
! Component: 3600  -  total flux cleaned = -0.00285055 Jy
! Component: 3650  -  total flux cleaned = -0.00286044 Jy
! Component: 3700  -  total flux cleaned = -0.00288004 Jy
! Component: 3750  -  total flux cleaned = -0.00289951 Jy
! Component: 3800  -  total flux cleaned = -0.00290919 Jy
! Component: 3850  -  total flux cleaned = -0.00288998 Jy
! Component: 3900  -  total flux cleaned = -0.00291869 Jy
! Component: 3950  -  total flux cleaned = -0.00294728 Jy
! Component: 4000  -  total flux cleaned = -0.00295673 Jy
! Component: 4050  -  total flux cleaned = -0.00297564 Jy
! Total flux subtracted in 4096 components = -0.00298501 Jy
! Clean residual min=-0.000641 max=0.000490 Jy/beam
! Clean residual mean=-0.000001 rms=0.000159 Jy/beam
! Combined flux in latest and established models = 0.27735 Jy
keep
! Adding 287 model components to the UV plane model.
! The established model now contains 454 components and 0.27735 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219h_uvs/J1755-2232_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.032 x 2.473 at -10.28 degrees (North through East)
! Clean map  min=-0.001403  max=0.14674 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1755-2232_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.146741 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000157192 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.321367 0.321367 0.642734 1.28547 2.57094 5.14188 10.2838 20.5675 41.135 82.27
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.146 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  933.511 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1755-2232_X_uvs.log closed on Thu Apr  7 12:17:10 2016