! Started logfile: /scr/pima/bg219h_uvs/J1755-2232_X_dfm.log on Thu May 19 22:36:47 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J1755-2232_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1755-2232_X_uva.fits
! AN table 1: 62 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.74552 visibilities/baseline/integration-bin.
! Found source: J1755-2232
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 24960 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1755-2232_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.017493Jy  sigma=22.282159
! Fit after  self-cal, rms=0.852420Jy  sigma=18.424028
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.807 mas, bmaj=1.962 mas, bpa=-12.99 degrees
! Estimated noise=0.421467 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0969502 Jy
! Component: 100  -  total flux cleaned = 0.148866 Jy
! Total flux subtracted in 100 components = 0.148866 Jy
! Clean residual min=-0.009389 max=0.026784 Jy/beam
! Clean residual mean=-0.000077 rms=0.003435 Jy/beam
! Combined flux in latest and established models = 0.148866 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.148866 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.102630Jy  sigma=2.178525
! Fit after  self-cal, rms=0.101803Jy  sigma=2.167112
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0333738 Jy
! Component: 100  -  total flux cleaned = 0.0553485 Jy
! Total flux subtracted in 100 components = 0.0553485 Jy
! Clean residual min=-0.006254 max=0.012788 Jy/beam
! Clean residual mean=-0.000041 rms=0.001947 Jy/beam
! Combined flux in latest and established models = 0.204214 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 48 components and 0.204214 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080374Jy  sigma=1.628532
! Fit after  self-cal, rms=0.080095Jy  sigma=1.626221
! Inverting map 
! Added new window around map position (1, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0161657 Jy
! Component: 100  -  total flux cleaned = 0.0278605 Jy
! Total flux subtracted in 100 components = 0.0278605 Jy
! Clean residual min=-0.004882 max=0.008081 Jy/beam
! Clean residual mean=-0.000023 rms=0.001324 Jy/beam
! Combined flux in latest and established models = 0.232075 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 68 components and 0.232075 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073667Jy  sigma=1.461927
! Fit after  self-cal, rms=0.073602Jy  sigma=1.461110
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.021 mas, bmaj=2.426 mas, bpa=-9.738 degrees
! Estimated noise=0.224497 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0159518 Jy
! Component: 100  -  total flux cleaned = 0.0249712 Jy
! Component: 150  -  total flux cleaned = 0.030457 Jy
! Component: 200  -  total flux cleaned = 0.0338755 Jy
! Total flux subtracted in 200 components = 0.0338755 Jy
! Clean residual min=-0.002505 max=0.005190 Jy/beam
! Clean residual mean=-0.000008 rms=0.000656 Jy/beam
! Combined flux in latest and established models = 0.26595 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 90 components and 0.26595 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070242Jy  sigma=1.372233
! Fit after  self-cal, rms=0.070209Jy  sigma=1.371405
! Inverting map 
! Added new window around map position (-1.4, 0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00399778 Jy
! Component: 100  -  total flux cleaned = 0.0061027 Jy
! Component: 150  -  total flux cleaned = 0.00718132 Jy
! Component: 200  -  total flux cleaned = 0.00761424 Jy
! Total flux subtracted in 200 components = 0.00761424 Jy
! Clean residual min=-0.002023 max=0.002108 Jy/beam
! Clean residual mean=-0.000002 rms=0.000499 Jy/beam
! Combined flux in latest and established models = 0.273565 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 108 components and 0.273564 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069948Jy  sigma=1.366350
! Fit after  self-cal, rms=0.069946Jy  sigma=1.365992
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.021 x 2.426 at -9.738 degrees (North through East)
! Clean map  min=-0.0018147  max=0.14278 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.12     KP        0.97     
!   LA        1.01     MK        1.08     NL        1.04     OV        1.01     
!   PT        0.98     SC        1.17     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.08     KP        0.97     
!   LA        1.01     MK        1.04     NL        0.99     OV        1.00     
!   PT        1.01     SC        1.09     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        1.08     KP        0.98     
!   LA        1.03     MK        1.03     NL        1.01     OV        0.99     
!   PT        0.98     SC        1.17     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.16     KP        0.98     
!   LA        1.04     MK        1.02     NL        1.00     OV        1.00     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.00     KP        0.98     
!   LA        1.03     MK        1.03     NL        0.99     OV        0.99     
!   PT        1.00     SC        1.12     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.00     KP        0.99     
!   LA        1.03     MK        0.99     NL        0.99     OV        0.99     
!   PT        1.00     SC        0.92     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.09     KP        0.99     
!   LA        1.02     MK        0.96     NL        0.96     OV        1.00     
!   PT        0.98     SC        0.88     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.08     KP        0.99     
!   LA        1.05     MK        0.92     NL        0.96     OV        1.01     
!   PT        0.98     SC        0.88     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.069946Jy  sigma=1.365992
! Fit after  self-cal, rms=0.071274Jy  sigma=1.361688
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.024 mas, bmaj=2.431 mas, bpa=-9.864 degrees
! Estimated noise=0.225815 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000207762 Jy
! Component: 100  -  total flux cleaned = 4.45039e-05 Jy
! Component: 150  -  total flux cleaned = 1.93348e-05 Jy
! Component: 200  -  total flux cleaned = 1.88618e-05 Jy
! Total flux subtracted in 200 components = 1.88618e-05 Jy
! Clean residual min=-0.001314 max=0.001619 Jy/beam
! Clean residual mean=-0.000002 rms=0.000370 Jy/beam
! Combined flux in latest and established models = 0.273583 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 120 components and 0.273583 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071250Jy  sigma=1.361335
! Fit after  self-cal, rms=0.071280Jy  sigma=1.361260
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071280Jy  sigma=1.361260
! Fit after  self-cal, rms=0.072030Jy  sigma=1.358951
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.025 mas, bmaj=2.43 mas, bpa=-9.927 degrees
! Estimated noise=0.226476 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000483258 Jy
! Component: 100  -  total flux cleaned = -0.000508775 Jy
! Component: 150  -  total flux cleaned = -0.000486117 Jy
! Component: 200  -  total flux cleaned = -0.000486129 Jy
! Total flux subtracted in 200 components = -0.000486129 Jy
! Clean residual min=-0.001334 max=0.001597 Jy/beam
! Clean residual mean=-0.000003 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.273097 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 133 components and 0.273097 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072013Jy  sigma=1.358661
! Fit after  self-cal, rms=0.072027Jy  sigma=1.358626
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (24.2, 37.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00129068 Jy
! Component: 100  -  total flux cleaned = 0.00128859 Jy
! Component: 150  -  total flux cleaned = 0.00131015 Jy
! Component: 200  -  total flux cleaned = 0.0013304 Jy
! Total flux subtracted in 200 components = 0.0013304 Jy
! Clean residual min=-0.001250 max=0.001383 Jy/beam
! Clean residual mean=-0.000003 rms=0.000318 Jy/beam
! Combined flux in latest and established models = 0.274428 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 147 components and 0.274428 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071998Jy  sigma=1.357972
! Fit after  self-cal, rms=0.071992Jy  sigma=1.357904
! Inverting map 
! Added new window around map position (23, -45.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000895863 Jy
! Component: 100  -  total flux cleaned = 0.00092564 Jy
! Component: 150  -  total flux cleaned = 0.000852171 Jy
! Component: 200  -  total flux cleaned = 0.000851605 Jy
! Total flux subtracted in 200 components = 0.000851605 Jy
! Clean residual min=-0.001203 max=0.001238 Jy/beam
! Clean residual mean=-0.000002 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.275279 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 159 components and 0.275279 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071968Jy  sigma=1.357296
! Fit after  self-cal, rms=0.071961Jy  sigma=1.357225
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071961Jy  sigma=1.357225
! Fit after  self-cal, rms=0.071892Jy  sigma=1.355860
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.021 mas, bmaj=2.425 mas, bpa=-9.955 degrees
! Estimated noise=0.225862 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000363768 Jy
! Component: 100  -  total flux cleaned = 0.000304121 Jy
! Component: 150  -  total flux cleaned = 0.000304177 Jy
! Component: 200  -  total flux cleaned = 0.000269523 Jy
! Total flux subtracted in 200 components = 0.000269523 Jy
! Clean residual min=-0.001213 max=0.001129 Jy/beam
! Clean residual mean=-0.000002 rms=0.000282 Jy/beam
! Combined flux in latest and established models = 0.275549 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 173 components and 0.275549 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071881Jy  sigma=1.355606
! Fit after  self-cal, rms=0.071880Jy  sigma=1.355567
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.93886e-05 Jy
! Component: 100  -  total flux cleaned = 8.92578e-05 Jy
! Component: 150  -  total flux cleaned = 7.34423e-05 Jy
! Component: 200  -  total flux cleaned = 8.86836e-05 Jy
! Total flux subtracted in 200 components = 8.86836e-05 Jy
! Clean residual min=-0.001243 max=0.001130 Jy/beam
! Clean residual mean=-0.000002 rms=0.000280 Jy/beam
! Combined flux in latest and established models = 0.275637 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 179 components and 0.275638 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071873Jy  sigma=1.355426
! Fit after  self-cal, rms=0.071870Jy  sigma=1.355419
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071870Jy  sigma=1.355419
! Fit after  self-cal, rms=0.072006Jy  sigma=1.355116
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.215 mas, bmaj=4.872 mas, bpa=-0.5315 degrees
! Estimated noise=0.273587 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.39419e-05 Jy
! Component: 100  -  total flux cleaned = -4.54529e-06 Jy
! Component: 150  -  total flux cleaned = 2.15441e-05 Jy
! Component: 200  -  total flux cleaned = 3.77781e-05 Jy
! Total flux subtracted in 200 components = 3.77781e-05 Jy
! Clean residual min=-0.001005 max=0.001074 Jy/beam
! Clean residual mean=-0.000004 rms=0.000297 Jy/beam
! Combined flux in latest and established models = 0.275675 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 195 components and 0.275675 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072004Jy  sigma=1.355084
! Fit after  self-cal, rms=0.072000Jy  sigma=1.355077
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.51688e-05 Jy
! Component: 100  -  total flux cleaned = 5.75075e-05 Jy
! Component: 150  -  total flux cleaned = 7.16552e-05 Jy
! Component: 200  -  total flux cleaned = 9.15423e-05 Jy
! Total flux subtracted in 200 components = 9.15423e-05 Jy
! Clean residual min=-0.001004 max=0.001070 Jy/beam
! Clean residual mean=-0.000004 rms=0.000294 Jy/beam
! Combined flux in latest and established models = 0.275767 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 200 components and 0.275767 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071999Jy  sigma=1.355059
! Fit after  self-cal, rms=0.071996Jy  sigma=1.355056
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.023 mas, bmaj=2.43 mas, bpa=-9.936 degrees
! Estimated noise=0.22626 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.023 x 2.43 at -9.936 degrees (North through East)
! Clean map  min=-0.001146  max=0.14332 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.806 mas, bmaj=1.967 mas, bpa=-13.29 degrees
! Estimated noise=0.428189 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0985326 Jy
! Component: 100  -  total flux cleaned = 0.152173 Jy
! Component: 150  -  total flux cleaned = 0.185309 Jy
! Component: 200  -  total flux cleaned = 0.20689 Jy
! Total flux subtracted in 200 components = 0.20689 Jy
! Clean residual min=-0.006130 max=0.012036 Jy/beam
! Clean residual mean=-0.000040 rms=0.001885 Jy/beam
! Combined flux in latest and established models = 0.20689 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 53 model components to the UV plane model.
! The established model now contains 53 components and 0.20689 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.023 mas, bmaj=2.43 mas, bpa=-9.936 degrees
! Estimated noise=0.22626 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0261958 Jy
! Component: 100  -  total flux cleaned = 0.0410149 Jy
! Component: 150  -  total flux cleaned = 0.0500794 Jy
! Component: 200  -  total flux cleaned = 0.0557062 Jy
! Total flux subtracted in 200 components = 0.0557062 Jy
! Clean residual min=-0.001850 max=0.002920 Jy/beam
! Clean residual mean=-0.000012 rms=0.000587 Jy/beam
! Combined flux in latest and established models = 0.262596 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 80 components and 0.262596 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00359543 Jy
! Component: 100  -  total flux cleaned = 0.00619744 Jy
! Component: 150  -  total flux cleaned = 0.00815715 Jy
! Component: 200  -  total flux cleaned = 0.00965454 Jy
! Total flux subtracted in 200 components = 0.00965454 Jy
! Clean residual min=-0.001506 max=0.001331 Jy/beam
! Clean residual mean=-0.000005 rms=0.000335 Jy/beam
! Combined flux in latest and established models = 0.272251 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 114 components and 0.272251 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.215 mas, bmaj=4.872 mas, bpa=-0.5315 degrees
! Estimated noise=0.273587 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00144753 Jy
! Component: 100  -  total flux cleaned = 0.00234296 Jy
! Component: 150  -  total flux cleaned = 0.0029034 Jy
! Component: 200  -  total flux cleaned = 0.00306367 Jy
! Total flux subtracted in 200 components = 0.00306367 Jy
! Clean residual min=-0.001117 max=0.001085 Jy/beam
! Clean residual mean=-0.000005 rms=0.000314 Jy/beam
! Combined flux in latest and established models = 0.275314 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000137029 Jy
! Component: 100  -  total flux cleaned = 0.000240574 Jy
! Component: 150  -  total flux cleaned = 0.000305555 Jy
! Component: 200  -  total flux cleaned = 0.000352234 Jy
! Total flux subtracted in 200 components = 0.000352234 Jy
! Clean residual min=-0.001051 max=0.001078 Jy/beam
! Clean residual mean=-0.000005 rms=0.000303 Jy/beam
! Combined flux in latest and established models = 0.275666 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 164 components and 0.275666 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.023 mas, bmaj=2.43 mas, bpa=-9.936 degrees
! Estimated noise=0.22626 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.07496e-05 Jy
! Component: 100  -  total flux cleaned = -2.14374e-05 Jy
! Component: 150  -  total flux cleaned = -2.28937e-05 Jy
! Component: 200  -  total flux cleaned = -2.30225e-05 Jy
! Total flux subtracted in 200 components = -2.30225e-05 Jy
! Clean residual min=-0.001328 max=0.001186 Jy/beam
! Clean residual mean=-0.000002 rms=0.000287 Jy/beam
! Combined flux in latest and established models = 0.275643 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 182 components and 0.275643 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072014Jy  sigma=1.355467
! Fit after  self-cal, rms=0.072010Jy  sigma=1.355365
wmodel /J1755-2232_X_map.mod
! wmodel: Unable to open new model file: /J1755-2232_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1755-2232_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.023 x 2.43 at -9.936 degrees (North through East)
! Clean map  min=-0.0012221  max=0.14636 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1755-2232_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.146363 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000283506 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.581103 0.581103 1.16221 2.32441 4.64882 9.29765 18.5953 37.1906 74.3812
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.146 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  516.259 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1755-2232_X_dfm.log closed on Thu May 19 22:36:51 2016