! Started logfile: /scr/pima/bg219h_uvs/J1739+4955_X_dfm.log on Thu May 19 22:35:51 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J1739+4955_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1739+4955_X_uva.fits
! AN table 1: 7 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.869841 visibilities/baseline/integration-bin.
! Found source: J1739+4955
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 3288 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1739+4955_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.031517Jy  sigma=21.368479
! Fit after  self-cal, rms=0.789918Jy  sigma=16.008144
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6273 mas, bmaj=2.391 mas, bpa=19.92 degrees
! Estimated noise=1.02959 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.165981 Jy
! Component: 100  -  total flux cleaned = 0.20587 Jy
! Total flux subtracted in 100 components = 0.20587 Jy
! Clean residual min=-0.011297 max=0.019234 Jy/beam
! Clean residual mean=-0.000006 rms=0.002983 Jy/beam
! Combined flux in latest and established models = 0.20587 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.20587 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085376Jy  sigma=1.536930
! Fit after  self-cal, rms=0.085257Jy  sigma=1.535607
! Inverting map 
! Added new window around map position (-14, -25.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0203015 Jy
! Component: 100  -  total flux cleaned = 0.032538 Jy
! Total flux subtracted in 100 components = 0.032538 Jy
! Clean residual min=-0.008701 max=0.012168 Jy/beam
! Clean residual mean=-0.000001 rms=0.002140 Jy/beam
! Combined flux in latest and established models = 0.238408 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 13 components and 0.238408 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079317Jy  sigma=1.366654
! Fit after  self-cal, rms=0.079191Jy  sigma=1.361608
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7752 mas, bmaj=2.46 mas, bpa=19.17 degrees
! Estimated noise=0.685724 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0122069 Jy
! Component: 100  -  total flux cleaned = 0.0195513 Jy
! Component: 150  -  total flux cleaned = 0.0243614 Jy
! Component: 200  -  total flux cleaned = 0.0276774 Jy
! Total flux subtracted in 200 components = 0.0276774 Jy
! Clean residual min=-0.005282 max=0.008023 Jy/beam
! Clean residual mean=0.000004 rms=0.001407 Jy/beam
! Combined flux in latest and established models = 0.266085 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 30 components and 0.266085 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077322Jy  sigma=1.305137
! Fit after  self-cal, rms=0.077328Jy  sigma=1.304463
! Inverting map 
! Added new window around map position (3.6, -11.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00728541 Jy
! Component: 100  -  total flux cleaned = 0.00981208 Jy
! Component: 150  -  total flux cleaned = 0.0109197 Jy
! Component: 200  -  total flux cleaned = 0.0117674 Jy
! Total flux subtracted in 200 components = 0.0117674 Jy
! Clean residual min=-0.004320 max=0.004896 Jy/beam
! Clean residual mean=0.000005 rms=0.001131 Jy/beam
! Combined flux in latest and established models = 0.277853 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 55 components and 0.277853 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076331Jy  sigma=1.288872
! Fit after  self-cal, rms=0.076295Jy  sigma=1.287616
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7752 x 2.46 at 19.17 degrees (North through East)
! Clean map  min=-0.004085  max=0.21414 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.02     HN        1.12     KP        0.98     
!   LA        0.95     MK        0.98     NL        1.06     OV        1.03     
!   PT        0.97     SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.00     HN        1.06     KP        0.99     
!   LA        1.01     MK        1.00     NL        0.99     OV        0.99     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.06     HN        1.10     KP        0.97     
!   LA        1.01     MK        0.99     NL        1.01     OV        0.95     
!   PT        1.05     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.02     HN        1.11     KP        1.05     
!   LA        1.03     MK        0.98     NL        1.01     OV        0.99     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.00     HN        1.11     KP        0.98     
!   LA        1.00     MK        0.97     NL        1.01     OV        0.98     
!   PT        0.93     SC        1.05     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.00     KP        0.98     
!   LA        1.02     MK        0.97     NL        1.01     OV        1.02     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.00     HN        1.09     KP        0.97     
!   LA        0.99     MK        0.98     NL        0.98     OV        0.96     
!   PT        1.02     SC        1.04     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.96     HN        1.11     KP        0.93     
!   LA        1.02     MK        1.08     NL        0.98     OV        1.03     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.96     HN        1.04     KP        1.00     
!   LA        1.01     MK        0.99     NL        0.99     OV        1.02     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.06     KP        1.02     
!   LA        0.96     MK        0.99     NL        1.03     OV        0.97     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.01     HN        1.14     KP        0.93     
!   LA        0.97     MK        0.97     NL        1.00     OV        1.04     
!   PT        0.99     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.076295Jy  sigma=1.287616
! Fit after  self-cal, rms=0.078120Jy  sigma=1.270550
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7771 mas, bmaj=2.475 mas, bpa=19.39 degrees
! Estimated noise=0.686962 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0013933 Jy
! Component: 100  -  total flux cleaned = -0.00180349 Jy
! Component: 150  -  total flux cleaned = -0.00213973 Jy
! Component: 200  -  total flux cleaned = -0.00231321 Jy
! Total flux subtracted in 200 components = -0.00231321 Jy
! Clean residual min=-0.003724 max=0.003795 Jy/beam
! Clean residual mean=0.000005 rms=0.000908 Jy/beam
! Combined flux in latest and established models = 0.27554 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 67 components and 0.27554 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077967Jy  sigma=1.267552
! Fit after  self-cal, rms=0.077988Jy  sigma=1.267338
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077988Jy  sigma=1.267338
! Fit after  self-cal, rms=0.078014Jy  sigma=1.266952
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7778 mas, bmaj=2.476 mas, bpa=19.42 degrees
! Estimated noise=0.684071 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00132885 Jy
! Component: 100  -  total flux cleaned = -0.00147988 Jy
! Component: 150  -  total flux cleaned = -0.00161891 Jy
! Component: 200  -  total flux cleaned = -0.0017059 Jy
! Total flux subtracted in 200 components = -0.0017059 Jy
! Clean residual min=-0.003672 max=0.003511 Jy/beam
! Clean residual mean=0.000004 rms=0.000867 Jy/beam
! Combined flux in latest and established models = 0.273834 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 76 components and 0.273834 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077925Jy  sigma=1.265784
! Fit after  self-cal, rms=0.077916Jy  sigma=1.265714
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.39903e-06 Jy
! Component: 100  -  total flux cleaned = -3.55346e-05 Jy
! Component: 150  -  total flux cleaned = 7.15334e-07 Jy
! Component: 200  -  total flux cleaned = 3.6017e-05 Jy
! Total flux subtracted in 200 components = 3.6017e-05 Jy
! Clean residual min=-0.003653 max=0.003373 Jy/beam
! Clean residual mean=0.000004 rms=0.000850 Jy/beam
! Combined flux in latest and established models = 0.27387 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 86 components and 0.27387 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077878Jy  sigma=1.264997
! Fit after  self-cal, rms=0.077871Jy  sigma=1.264958
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077871Jy  sigma=1.264958
! Fit after  self-cal, rms=0.077725Jy  sigma=1.264609
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.778 mas, bmaj=2.476 mas, bpa=19.45 degrees
! Estimated noise=0.680795 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00111806 Jy
! Component: 100  -  total flux cleaned = -0.00100218 Jy
! Component: 150  -  total flux cleaned = -0.00107059 Jy
! Component: 200  -  total flux cleaned = -0.00110276 Jy
! Total flux subtracted in 200 components = -0.00110276 Jy
! Clean residual min=-0.003644 max=0.003208 Jy/beam
! Clean residual mean=0.000004 rms=0.000830 Jy/beam
! Combined flux in latest and established models = 0.272767 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 93 components and 0.272767 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077661Jy  sigma=1.264260
! Fit after  self-cal, rms=0.077656Jy  sigma=1.264234
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.247e-05 Jy
! Component: 100  -  total flux cleaned = -4.75146e-05 Jy
! Component: 150  -  total flux cleaned = -7.68926e-05 Jy
! Component: 200  -  total flux cleaned = -7.73813e-05 Jy
! Total flux subtracted in 200 components = -7.73813e-05 Jy
! Clean residual min=-0.003617 max=0.003104 Jy/beam
! Clean residual mean=0.000004 rms=0.000820 Jy/beam
! Combined flux in latest and established models = 0.272689 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 101 components and 0.272689 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077634Jy  sigma=1.263805
! Fit after  self-cal, rms=0.077630Jy  sigma=1.263787
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077630Jy  sigma=1.263787
! Fit after  self-cal, rms=0.077370Jy  sigma=1.263498
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.969 mas, bmaj=2.769 mas, bpa=24.7 degrees
! Estimated noise=0.877137 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00134261 Jy
! Component: 100  -  total flux cleaned = -0.00194308 Jy
! Component: 150  -  total flux cleaned = -0.00219978 Jy
! Component: 200  -  total flux cleaned = -0.0023566 Jy
! Total flux subtracted in 200 components = -0.0023566 Jy
! Clean residual min=-0.003506 max=0.003962 Jy/beam
! Clean residual mean=0.000009 rms=0.001099 Jy/beam
! Combined flux in latest and established models = 0.270333 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 113 components and 0.270333 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077351Jy  sigma=1.263757
! Fit after  self-cal, rms=0.077349Jy  sigma=1.263703
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000337788 Jy
! Component: 100  -  total flux cleaned = -0.000585208 Jy
! Component: 150  -  total flux cleaned = -0.00068437 Jy
! Component: 200  -  total flux cleaned = -0.000811089 Jy
! Total flux subtracted in 200 components = -0.000811089 Jy
! Clean residual min=-0.003450 max=0.003736 Jy/beam
! Clean residual mean=0.000009 rms=0.001073 Jy/beam
! Combined flux in latest and established models = 0.269522 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 117 components and 0.269522 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077341Jy  sigma=1.263934
! Fit after  self-cal, rms=0.077340Jy  sigma=1.263921
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.778 mas, bmaj=2.476 mas, bpa=19.46 degrees
! Estimated noise=0.67746 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.778 x 2.476 at 19.46 degrees (North through East)
! Clean map  min=-0.0031309  max=0.21215 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.629 mas, bmaj=2.409 mas, bpa=20.14 degrees
! Estimated noise=1.01993 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.164342 Jy
! Component: 100  -  total flux cleaned = 0.203921 Jy
! Component: 150  -  total flux cleaned = 0.222945 Jy
! Component: 200  -  total flux cleaned = 0.23516 Jy
! Total flux subtracted in 200 components = 0.23516 Jy
! Clean residual min=-0.007411 max=0.007986 Jy/beam
! Clean residual mean=-0.000000 rms=0.001828 Jy/beam
! Combined flux in latest and established models = 0.23516 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.23516 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.778 mas, bmaj=2.476 mas, bpa=19.46 degrees
! Estimated noise=0.67746 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0125646 Jy
! Component: 100  -  total flux cleaned = 0.0199416 Jy
! Component: 150  -  total flux cleaned = 0.0249497 Jy
! Component: 200  -  total flux cleaned = 0.0278812 Jy
! Total flux subtracted in 200 components = 0.0278812 Jy
! Clean residual min=-0.004052 max=0.004138 Jy/beam
! Clean residual mean=0.000003 rms=0.001034 Jy/beam
! Combined flux in latest and established models = 0.263041 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 44 components and 0.263041 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.969 mas, bmaj=2.769 mas, bpa=24.7 degrees
! Estimated noise=0.877137 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00542679 Jy
! Component: 100  -  total flux cleaned = 0.00727012 Jy
! Component: 150  -  total flux cleaned = 0.00771537 Jy
! Component: 200  -  total flux cleaned = 0.0078715 Jy
! Total flux subtracted in 200 components = 0.0078715 Jy
! Clean residual min=-0.003984 max=0.004081 Jy/beam
! Clean residual mean=0.000009 rms=0.001215 Jy/beam
! Combined flux in latest and established models = 0.270912 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.358e-05 Jy
! Component: 100  -  total flux cleaned = -0.00012091 Jy
! Component: 150  -  total flux cleaned = -0.000224006 Jy
! Component: 200  -  total flux cleaned = -0.000320085 Jy
! Total flux subtracted in 200 components = -0.000320085 Jy
! Clean residual min=-0.003818 max=0.003809 Jy/beam
! Clean residual mean=0.000009 rms=0.001132 Jy/beam
! Combined flux in latest and established models = 0.270592 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 69 components and 0.270592 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.778 mas, bmaj=2.476 mas, bpa=19.46 degrees
! Estimated noise=0.67746 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000102498 Jy
! Component: 100  -  total flux cleaned = 0.000577754 Jy
! Component: 150  -  total flux cleaned = 0.00112667 Jy
! Component: 200  -  total flux cleaned = 0.00128589 Jy
! Total flux subtracted in 200 components = 0.00128589 Jy
! Clean residual min=-0.003567 max=0.003253 Jy/beam
! Clean residual mean=0.000004 rms=0.000819 Jy/beam
! Combined flux in latest and established models = 0.271878 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 87 components and 0.271878 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077382Jy  sigma=1.264979
! Fit after  self-cal, rms=0.077355Jy  sigma=1.264654
wmodel /J1739+4955_X_map.mod
! wmodel: Unable to open new model file: /J1739+4955_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1739+4955_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.778 x 2.476 at 19.46 degrees (North through East)
! Clean map  min=-0.0031655  max=0.2114 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1739+4955_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.211402 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000814881 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.15639 1.15639 2.31279 4.62558 9.25116 18.5023 37.0046 74.0092
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0024 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.211 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  259.427 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1739+4955_X_dfm.log closed on Thu May 19 22:35:54 2016