! Started logfile: /scr/pima/bg219h_uvs/J1733-1304_S_uvs.log on Thu Apr  7 09:08:31 2016
obs /scr/pima/bg219h_uvs/J1733-1304_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1733-1304_S_uva.fits
! AN table 1: 14 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.52381 visibilities/baseline/integration-bin.
! Found source: J1733-1304
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 1320 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219h_uvs/J1733-1304_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=2.798829Jy  sigma=39.417256
! Fit after  self-cal, rms=1.628340Jy  sigma=21.586157
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.611 mas, bmaj=6.528 mas, bpa=2.544 degrees
! Estimated noise=2.13537 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.59984 Jy
! Component: 100  -  total flux cleaned = 2.06072 Jy
! Total flux subtracted in 100 components = 2.06072 Jy
! Clean residual min=-0.166801 max=0.234909 Jy/beam
! Clean residual mean=0.000384 rms=0.049833 Jy/beam
! Combined flux in latest and established models = 2.06072 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 2.06072 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.907515Jy  sigma=11.754780
! Fit after  self-cal, rms=0.907306Jy  sigma=11.743486
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.092 mas, bmaj=7.392 mas, bpa=3.603 degrees
! Estimated noise=1.76102 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.434763 Jy
! Component: 100  -  total flux cleaned = 0.675313 Jy
! Component: 150  -  total flux cleaned = 0.817179 Jy
! Component: 200  -  total flux cleaned = 0.907743 Jy
! Total flux subtracted in 200 components = 0.907743 Jy
! Clean residual min=-0.190553 max=0.245606 Jy/beam
! Clean residual mean=0.000683 rms=0.064759 Jy/beam
! Combined flux in latest and established models = 2.96846 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 41 components and 2.96846 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.629016Jy  sigma=8.013141
! Fit after  self-cal, rms=0.624970Jy  sigma=7.942136
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.092 x 7.392 at 3.603 degrees (North through East)
! Clean map  min=-0.18606  max=2.2399 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00*    HN        0.97     KP        1.08     
!   LA        0.89     MK        0.90     NL        1.16     OV        1.08     
!   PT        0.92     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.00*    HN        1.01     KP        1.00     
!   LA        0.89     MK        0.94     NL        1.05     OV        0.92     
!   PT        0.89     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.624970Jy  sigma=7.942136
! Fit after  self-cal, rms=0.592888Jy  sigma=7.464076
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.08 mas, bmaj=7.404 mas, bpa=3.257 degrees
! Estimated noise=1.73778 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0526394 Jy
! Component: 100  -  total flux cleaned = 0.0539755 Jy
! Component: 150  -  total flux cleaned = 0.0565048 Jy
! Component: 200  -  total flux cleaned = 0.0600027 Jy
! Total flux subtracted in 200 components = 0.0600027 Jy
! Clean residual min=-0.157213 max=0.215579 Jy/beam
! Clean residual mean=0.000525 rms=0.052126 Jy/beam
! Combined flux in latest and established models = 3.02847 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 50 components and 3.02847 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.582608Jy  sigma=7.351247
! Fit after  self-cal, rms=0.582778Jy  sigma=7.334333
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.582778Jy  sigma=7.334333
! Fit after  self-cal, rms=0.571745Jy  sigma=6.963284
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.088 mas, bmaj=7.425 mas, bpa=3.052 degrees
! Estimated noise=1.71485 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0372319 Jy
! Component: 100  -  total flux cleaned = -0.0439001 Jy
! Component: 150  -  total flux cleaned = -0.0492142 Jy
! Component: 200  -  total flux cleaned = -0.0519245 Jy
! Total flux subtracted in 200 components = -0.0519245 Jy
! Clean residual min=-0.142940 max=0.216176 Jy/beam
! Clean residual mean=-0.000103 rms=0.047071 Jy/beam
! Combined flux in latest and established models = 2.97654 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 54 components and 2.97654 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.563664Jy  sigma=6.911940
! Fit after  self-cal, rms=0.564531Jy  sigma=6.901063
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-37.5, 68.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.191192 Jy
! Component: 100  -  total flux cleaned = 0.288014 Jy
! Component: 150  -  total flux cleaned = 0.355501 Jy
! Component: 200  -  total flux cleaned = 0.401707 Jy
! Total flux subtracted in 200 components = 0.401707 Jy
! Clean residual min=-0.108901 max=0.139537 Jy/beam
! Clean residual mean=-0.000033 rms=0.033884 Jy/beam
! Combined flux in latest and established models = 3.37825 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 94 components and 3.37825 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.487837Jy  sigma=5.561287
! Fit after  self-cal, rms=0.470304Jy  sigma=5.412984
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.470304Jy  sigma=5.412984
! Fit after  self-cal, rms=0.424682Jy  sigma=4.983249
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.108 mas, bmaj=7.459 mas, bpa=3.111 degrees
! Estimated noise=1.70581 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0623272 Jy
! Component: 100  -  total flux cleaned = 0.0779331 Jy
! Component: 150  -  total flux cleaned = 0.0869456 Jy
! Component: 200  -  total flux cleaned = 0.0944074 Jy
! Total flux subtracted in 200 components = 0.0944074 Jy
! Clean residual min=-0.093821 max=0.126839 Jy/beam
! Clean residual mean=-0.000068 rms=0.028425 Jy/beam
! Combined flux in latest and established models = 3.47266 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 113 components and 3.47266 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.409656Jy  sigma=4.665109
! Fit after  self-cal, rms=0.405146Jy  sigma=4.630967
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (13.5, -15.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.129637 Jy
! Component: 100  -  total flux cleaned = 0.197989 Jy
! Component: 150  -  total flux cleaned = 0.225089 Jy
! Component: 200  -  total flux cleaned = 0.242242 Jy
! Total flux subtracted in 200 components = 0.242242 Jy
! Clean residual min=-0.071225 max=0.069227 Jy/beam
! Clean residual mean=-0.000283 rms=0.020089 Jy/beam
! Combined flux in latest and established models = 3.7149 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 141 components and 3.7149 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.339603Jy  sigma=3.899112
! Fit after  self-cal, rms=0.334156Jy  sigma=3.829559
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.334156Jy  sigma=3.829559
! Fit after  self-cal, rms=0.330623Jy  sigma=3.629484
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.557 mas, bmaj=11.6 mas, bpa=-5.078 degrees
! Estimated noise=2.28897 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.113688 Jy
! Component: 100  -  total flux cleaned = 0.134277 Jy
! Component: 150  -  total flux cleaned = 0.144581 Jy
! Component: 200  -  total flux cleaned = 0.155334 Jy
! Total flux subtracted in 200 components = 0.155334 Jy
! Clean residual min=-0.097788 max=0.084557 Jy/beam
! Clean residual mean=-0.000390 rms=0.027035 Jy/beam
! Combined flux in latest and established models = 3.87023 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 154 components and 3.87023 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.297986Jy  sigma=3.425309
! Fit after  self-cal, rms=0.295418Jy  sigma=3.361032
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00911683 Jy
! Component: 100  -  total flux cleaned = 0.0134122 Jy
! Component: 150  -  total flux cleaned = 0.0183872 Jy
! Component: 200  -  total flux cleaned = 0.025013 Jy
! Total flux subtracted in 200 components = 0.025013 Jy
! Clean residual min=-0.095442 max=0.081525 Jy/beam
! Clean residual mean=-0.000429 rms=0.024763 Jy/beam
! Combined flux in latest and established models = 3.89524 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 162 components and 3.89524 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.288630Jy  sigma=3.350916
! Fit after  self-cal, rms=0.288735Jy  sigma=3.333708
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.104 mas, bmaj=7.45 mas, bpa=3.026 degrees
! Estimated noise=1.7019 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.104 x 7.45 at 3.026 degrees (North through East)
! Clean map  min=-0.07033  max=2.1005 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.288735Jy  sigma=3.333708
! Fit after  self-cal, rms=0.282311Jy  sigma=3.027321
! Inverting map and beam 
! Estimated beam: bmin=3.09 mas, bmaj=7.441 mas, bpa=2.809 degrees
! Estimated noise=1.69716 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0350625 Jy
! Component: 100  -  total flux cleaned = 0.0398366 Jy
! Component: 150  -  total flux cleaned = 0.04174 Jy
! Component: 200  -  total flux cleaned = 0.0434954 Jy
! Total flux subtracted in 200 components = 0.0434954 Jy
! Clean residual min=-0.052485 max=0.051300 Jy/beam
! Clean residual mean=0.000012 rms=0.013636 Jy/beam
! Combined flux in latest and established models = 3.93874 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 179 components and 3.93874 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.271362Jy  sigma=2.867142
! Fit after  self-cal, rms=0.270953Jy  sigma=2.851438
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.02094e-05 Jy
! Component: 100  -  total flux cleaned = 0.00152943 Jy
! Component: 150  -  total flux cleaned = 0.00149608 Jy
! Component: 200  -  total flux cleaned = 0.000825037 Jy
! Total flux subtracted in 200 components = 0.000825037 Jy
! Clean residual min=-0.051458 max=0.048067 Jy/beam
! Clean residual mean=0.000007 rms=0.013115 Jy/beam
! Combined flux in latest and established models = 3.93956 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 190 components and 3.93956 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.266256Jy  sigma=2.792614
! Fit after  self-cal, rms=0.266413Jy  sigma=2.787126
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.266413Jy  sigma=2.787126
! Fit after  self-cal, rms=0.261423Jy  sigma=2.699516
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.606 mas, bmaj=6.575 mas, bpa=1.934 degrees
! Estimated noise=2.07232 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.54721 Jy
! Component: 100  -  total flux cleaned = 2.01416 Jy
! Component: 150  -  total flux cleaned = 2.28678 Jy
! Component: 200  -  total flux cleaned = 2.49664 Jy
! Total flux subtracted in 200 components = 2.49664 Jy
! Clean residual min=-0.126867 max=0.174293 Jy/beam
! Clean residual mean=0.000180 rms=0.035210 Jy/beam
! Combined flux in latest and established models = 2.49664 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 2.49664 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.094 mas, bmaj=7.443 mas, bpa=2.87 degrees
! Estimated noise=1.69994 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.29386 Jy
! Component: 100  -  total flux cleaned = 0.511642 Jy
! Component: 150  -  total flux cleaned = 0.686418 Jy
! Component: 200  -  total flux cleaned = 0.828359 Jy
! Total flux subtracted in 200 components = 0.828359 Jy
! Clean residual min=-0.107327 max=0.131064 Jy/beam
! Clean residual mean=0.000284 rms=0.034649 Jy/beam
! Combined flux in latest and established models = 3.325 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 62 components and 3.325 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.543 mas, bmaj=11.59 mas, bpa=-5.42 degrees
! Estimated noise=2.29271 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.220905 Jy
! Component: 100  -  total flux cleaned = 0.362732 Jy
! Component: 150  -  total flux cleaned = 0.459801 Jy
! Component: 200  -  total flux cleaned = 0.525466 Jy
! Total flux subtracted in 200 components = 0.525466 Jy
! Clean residual min=-0.095894 max=0.093820 Jy/beam
! Clean residual mean=0.000207 rms=0.027081 Jy/beam
! Combined flux in latest and established models = 3.85047 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0235864 Jy
! Component: 100  -  total flux cleaned = 0.0419373 Jy
! Component: 150  -  total flux cleaned = 0.0592369 Jy
! Component: 200  -  total flux cleaned = 0.072829 Jy
! Total flux subtracted in 200 components = 0.072829 Jy
! Clean residual min=-0.083718 max=0.076994 Jy/beam
! Clean residual mean=0.000124 rms=0.022407 Jy/beam
! Combined flux in latest and established models = 3.9233 Jy
! Adding 62 model components to the UV plane model.
! The established model now contains 112 components and 3.92329 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.094 mas, bmaj=7.443 mas, bpa=2.87 degrees
! Estimated noise=1.69994 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0123469 Jy
! Component: 100  -  total flux cleaned = 0.0239838 Jy
! Component: 150  -  total flux cleaned = 0.0300192 Jy
! Component: 200  -  total flux cleaned = 0.0332233 Jy
! Total flux subtracted in 200 components = 0.0332233 Jy
! Clean residual min=-0.053110 max=0.055200 Jy/beam
! Clean residual mean=0.000067 rms=0.014127 Jy/beam
! Combined flux in latest and established models = 3.95652 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 131 components and 3.95652 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.269027Jy  sigma=2.929695
! Fit after  self-cal, rms=0.268889Jy  sigma=2.863262
wmodel /scr/pima/bg219h_uvs/J1733-1304_S_map.mod
! Writing 131 model components to file: /scr/pima/bg219h_uvs/J1733-1304_S_map.mod
wobs /scr/pima/bg219h_uvs/J1733-1304_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219h_uvs/J1733-1304_S_uvs.fits
wwins /scr/pima/bg219h_uvs/J1733-1304_S_map.win
! wwins: Wrote 3 windows to /scr/pima/bg219h_uvs/J1733-1304_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00431589 Jy
! Component: 100  -  total flux cleaned = -0.0141138 Jy
! Component: 150  -  total flux cleaned = -0.0223175 Jy
! Component: 200  -  total flux cleaned = -0.0284537 Jy
! Component: 250  -  total flux cleaned = -0.032038 Jy
! Component: 300  -  total flux cleaned = -0.0313458 Jy
! Component: 350  -  total flux cleaned = -0.0320273 Jy
! Component: 400  -  total flux cleaned = -0.0326701 Jy
! Component: 450  -  total flux cleaned = -0.033269 Jy
! Component: 500  -  total flux cleaned = -0.0338462 Jy
! Component: 550  -  total flux cleaned = -0.0332846 Jy
! Component: 600  -  total flux cleaned = -0.0354602 Jy
! Component: 650  -  total flux cleaned = -0.0370253 Jy
! Component: 700  -  total flux cleaned = -0.0395031 Jy
! Component: 750  -  total flux cleaned = -0.0395026 Jy
! Component: 800  -  total flux cleaned = -0.0422947 Jy
! Component: 850  -  total flux cleaned = -0.0431897 Jy
! Component: 900  -  total flux cleaned = -0.0431812 Jy
! Component: 950  -  total flux cleaned = -0.0419038 Jy
! Component: 1000  -  total flux cleaned = -0.0398464 Jy
! Component: 1050  -  total flux cleaned = -0.0386618 Jy
! Component: 1100  -  total flux cleaned = -0.0371136 Jy
! Component: 1150  -  total flux cleaned = -0.0363561 Jy
! Component: 1200  -  total flux cleaned = -0.0352484 Jy
! Component: 1250  -  total flux cleaned = -0.0341723 Jy
! Component: 1300  -  total flux cleaned = -0.0334906 Jy
! Component: 1350  -  total flux cleaned = -0.0331563 Jy
! Component: 1400  -  total flux cleaned = -0.032503 Jy
! Component: 1450  -  total flux cleaned = -0.0328272 Jy
! Component: 1500  -  total flux cleaned = -0.0328192 Jy
! Component: 1550  -  total flux cleaned = -0.0331247 Jy
! Component: 1600  -  total flux cleaned = -0.0325176 Jy
! Component: 1650  -  total flux cleaned = -0.0334169 Jy
! Component: 1700  -  total flux cleaned = -0.0331196 Jy
! Component: 1750  -  total flux cleaned = -0.0331276 Jy
! Component: 1800  -  total flux cleaned = -0.0331355 Jy
! Component: 1850  -  total flux cleaned = -0.0334119 Jy
! Component: 1900  -  total flux cleaned = -0.0331439 Jy
! Component: 1950  -  total flux cleaned = -0.0328788 Jy
! Component: 2000  -  total flux cleaned = -0.033661 Jy
! Component: 2050  -  total flux cleaned = -0.0333946 Jy
! Component: 2100  -  total flux cleaned = -0.0331402 Jy
! Component: 2150  -  total flux cleaned = -0.0333807 Jy
! Component: 2200  -  total flux cleaned = -0.0333836 Jy
! Component: 2250  -  total flux cleaned = -0.0333786 Jy
! Component: 2300  -  total flux cleaned = -0.0333779 Jy
! Component: 2350  -  total flux cleaned = -0.0338443 Jy
! Component: 2400  -  total flux cleaned = -0.0347596 Jy
! Component: 2450  -  total flux cleaned = -0.034758 Jy
! Component: 2500  -  total flux cleaned = -0.0354275 Jy
! Component: 2550  -  total flux cleaned = -0.0363078 Jy
! Component: 2600  -  total flux cleaned = -0.0365232 Jy
! Component: 2650  -  total flux cleaned = -0.0378125 Jy
! Component: 2700  -  total flux cleaned = -0.0382378 Jy
! Component: 2750  -  total flux cleaned = -0.0390782 Jy
! Component: 2800  -  total flux cleaned = -0.040324 Jy
! Component: 2850  -  total flux cleaned = -0.0411471 Jy
! Component: 2900  -  total flux cleaned = -0.0419634 Jy
! Component: 2950  -  total flux cleaned = -0.0427702 Jy
! Component: 3000  -  total flux cleaned = -0.0435667 Jy
! Component: 3050  -  total flux cleaned = -0.0441591 Jy
! Component: 3100  -  total flux cleaned = -0.0447477 Jy
! Component: 3150  -  total flux cleaned = -0.0459135 Jy
! Component: 3200  -  total flux cleaned = -0.0453343 Jy
! Component: 3250  -  total flux cleaned = -0.0464804 Jy
! Component: 3300  -  total flux cleaned = -0.0468605 Jy
! Component: 3350  -  total flux cleaned = -0.0474237 Jy
! Component: 3400  -  total flux cleaned = -0.0481651 Jy
! Component: 3450  -  total flux cleaned = -0.0492737 Jy
! Component: 3500  -  total flux cleaned = -0.0500077 Jy
! Component: 3550  -  total flux cleaned = -0.0510962 Jy
! Component: 3600  -  total flux cleaned = -0.05236 Jy
! Component: 3650  -  total flux cleaned = -0.0532562 Jy
! Component: 3700  -  total flux cleaned = -0.0548559 Jy
! Component: 3750  -  total flux cleaned = -0.0557401 Jy
! Component: 3800  -  total flux cleaned = -0.0569661 Jy
! Component: 3850  -  total flux cleaned = -0.0581846 Jy
! Component: 3900  -  total flux cleaned = -0.0595679 Jy
! Component: 3950  -  total flux cleaned = -0.060084 Jy
! Component: 4000  -  total flux cleaned = -0.0611085 Jy
! Component: 4050  -  total flux cleaned = -0.0616183 Jy
! Total flux subtracted in 4096 components = -0.0626301 Jy
! Clean residual min=-0.011061 max=0.010037 Jy/beam
! Clean residual mean=-0.000024 rms=0.003209 Jy/beam
! Combined flux in latest and established models = 3.89389 Jy
keep
! Adding 372 model components to the UV plane model.
! The established model now contains 503 components and 3.89389 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219h_uvs/J1733-1304_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.094 x 7.443 at 2.87 degrees (North through East)
! Clean map  min=-0.06418  max=2.114 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1733-1304_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 2.11396 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00334865 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.475221 0.475221 0.950442 1.90088 3.80177 7.60353 15.2071 30.4141 60.8283
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.01 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       2.113 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  631.285 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1733-1304_S_uvs.log closed on Thu Apr  7 09:08:35 2016