! Started logfile: /scr/pima/bg219h_uvs/J1700-2610_S_dfm.log on Thu May 19 22:34:29 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219h_uvs/J1700-2610_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1700-2610_S_uva.fits
! AN table 1: 14 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.65873 visibilities/baseline/integration-bin.
! Found source: J1700-2610
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 1660 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1700-2610_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.980053Jy  sigma=29.708912
! Fit after  self-cal, rms=0.862715Jy  sigma=12.235278
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.071 mas, bmaj=5.793 mas, bpa=1.091 degrees
! Estimated noise=1.58547 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.917947 Jy
! Component: 100  -  total flux cleaned = 1.32836 Jy
! Total flux subtracted in 100 components = 1.32836 Jy
! Clean residual min=-0.092398 max=0.204197 Jy/beam
! Clean residual mean=-0.000965 rms=0.026812 Jy/beam
! Combined flux in latest and established models = 1.32836 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 1.32836 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.621282Jy  sigma=8.317304
! Fit after  self-cal, rms=0.620727Jy  sigma=8.310117
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.242035 Jy
! Component: 100  -  total flux cleaned = 0.395865 Jy
! Total flux subtracted in 100 components = 0.395865 Jy
! Clean residual min=-0.056887 max=0.102125 Jy/beam
! Clean residual mean=-0.000580 rms=0.015619 Jy/beam
! Combined flux in latest and established models = 1.72423 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 25 components and 1.72423 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.385637Jy  sigma=5.159125
! Fit after  self-cal, rms=0.385191Jy  sigma=5.155956
! Inverting map 
! Added new window around map position (2.5, -2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.117188 Jy
! Component: 100  -  total flux cleaned = 0.203149 Jy
! Total flux subtracted in 100 components = 0.203149 Jy
! Clean residual min=-0.041437 max=0.067786 Jy/beam
! Clean residual mean=-0.000379 rms=0.010928 Jy/beam
! Combined flux in latest and established models = 1.92738 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 37 components and 1.92738 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.292067Jy  sigma=3.904221
! Fit after  self-cal, rms=0.291469Jy  sigma=3.894359
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.428 mas, bmaj=6.48 mas, bpa=0.7977 degrees
! Estimated noise=1.35506 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.109199 Jy
! Component: 100  -  total flux cleaned = 0.176356 Jy
! Component: 150  -  total flux cleaned = 0.221074 Jy
! Component: 200  -  total flux cleaned = 0.251226 Jy
! Total flux subtracted in 200 components = 0.251226 Jy
! Clean residual min=-0.029814 max=0.041662 Jy/beam
! Clean residual mean=-0.000352 rms=0.008952 Jy/beam
! Combined flux in latest and established models = 2.1786 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 53 components and 2.1786 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.228601Jy  sigma=3.055485
! Fit after  self-cal, rms=0.227553Jy  sigma=3.039329
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.428 x 6.48 at 0.7977 degrees (North through East)
! Clean map  min=-0.026835  max=1.307 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00*    HN        1.00     KP        0.98     
!   LA        0.98     MK        1.03     NL        1.19     OV        0.98     
!   PT        0.97     SC        1.06     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00*    HN        1.05     KP        0.98     
!   LA        0.99     MK        1.02     NL        1.15     OV        0.96     
!   PT        0.96     SC        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00*    HN        1.16     KP        0.99     
!   LA        0.96     MK        1.00     NL        0.94     OV        0.97     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00*    HN        1.18     KP        0.96     
!   LA        0.96     MK        0.97     NL        0.96     OV        0.99     
!   PT        0.97     SC        0.90     
! 
! 
! Fit before self-cal, rms=0.227553Jy  sigma=3.039329
! Fit after  self-cal, rms=0.190318Jy  sigma=2.453059
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.435 mas, bmaj=6.491 mas, bpa=1.086 degrees
! Estimated noise=1.3425 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00425444 Jy
! Component: 100  -  total flux cleaned = -0.00544897 Jy
! Component: 150  -  total flux cleaned = -0.00568917 Jy
! Component: 200  -  total flux cleaned = -0.00569055 Jy
! Total flux subtracted in 200 components = -0.00569055 Jy
! Clean residual min=-0.020349 max=0.020372 Jy/beam
! Clean residual mean=-0.000028 rms=0.004783 Jy/beam
! Combined flux in latest and established models = 2.17291 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 65 components and 2.17291 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.189382Jy  sigma=2.438846
! Fit after  self-cal, rms=0.189317Jy  sigma=2.437326
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.189317Jy  sigma=2.437326
! Fit after  self-cal, rms=0.187091Jy  sigma=2.404528
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.438 mas, bmaj=6.494 mas, bpa=1.011 degrees
! Estimated noise=1.34249 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0042292 Jy
! Component: 100  -  total flux cleaned = -0.00589469 Jy
! Component: 150  -  total flux cleaned = -0.0067691 Jy
! Component: 200  -  total flux cleaned = -0.00724933 Jy
! Total flux subtracted in 200 components = -0.00724933 Jy
! Clean residual min=-0.017321 max=0.018305 Jy/beam
! Clean residual mean=-0.000044 rms=0.004263 Jy/beam
! Combined flux in latest and established models = 2.16566 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 70 components and 2.16566 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.186506Jy  sigma=2.397742
! Fit after  self-cal, rms=0.186452Jy  sigma=2.396851
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000423438 Jy
! Component: 100  -  total flux cleaned = -0.00028989 Jy
! Component: 150  -  total flux cleaned = -0.00054619 Jy
! Component: 200  -  total flux cleaned = -0.000667821 Jy
! Total flux subtracted in 200 components = -0.000667821 Jy
! Clean residual min=-0.017390 max=0.017588 Jy/beam
! Clean residual mean=-0.000046 rms=0.004205 Jy/beam
! Combined flux in latest and established models = 2.16499 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 73 components and 2.16499 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.186239Jy  sigma=2.393123
! Fit after  self-cal, rms=0.186212Jy  sigma=2.392665
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.186212Jy  sigma=2.392665
! Fit after  self-cal, rms=0.184311Jy  sigma=2.338614
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.439 mas, bmaj=6.486 mas, bpa=0.8874 degrees
! Estimated noise=1.33831 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00576334 Jy
! Component: 100  -  total flux cleaned = -0.00655933 Jy
! Component: 150  -  total flux cleaned = -0.00668058 Jy
! Component: 200  -  total flux cleaned = -0.00710315 Jy
! Total flux subtracted in 200 components = -0.00710315 Jy
! Clean residual min=-0.014569 max=0.014841 Jy/beam
! Clean residual mean=-0.000084 rms=0.003446 Jy/beam
! Combined flux in latest and established models = 2.15789 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 89 components and 2.15789 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.183726Jy  sigma=2.337558
! Fit after  self-cal, rms=0.183710Jy  sigma=2.337108
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000145093 Jy
! Component: 100  -  total flux cleaned = -0.000446143 Jy
! Component: 150  -  total flux cleaned = -0.000723644 Jy
! Component: 200  -  total flux cleaned = -0.00107529 Jy
! Total flux subtracted in 200 components = -0.00107529 Jy
! Clean residual min=-0.014487 max=0.014574 Jy/beam
! Clean residual mean=-0.000088 rms=0.003417 Jy/beam
! Combined flux in latest and established models = 2.15681 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 92 components and 2.15682 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.183580Jy  sigma=2.335288
! Fit after  self-cal, rms=0.183563Jy  sigma=2.335011
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.183563Jy  sigma=2.335011
! Fit after  self-cal, rms=0.183038Jy  sigma=2.332323
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.184 mas, bmaj=16.58 mas, bpa=3.841 degrees
! Estimated noise=2.25772 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00762922 Jy
! Component: 100  -  total flux cleaned = -0.00815707 Jy
! Component: 150  -  total flux cleaned = -0.00860291 Jy
! Component: 200  -  total flux cleaned = -0.00897576 Jy
! Total flux subtracted in 200 components = -0.00897576 Jy
! Clean residual min=-0.020120 max=0.017607 Jy/beam
! Clean residual mean=-0.000264 rms=0.006019 Jy/beam
! Combined flux in latest and established models = 2.14784 Jy
selfcal
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 94 components and 2.14784 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.182754Jy  sigma=2.336833
! Fit after  self-cal, rms=0.182689Jy  sigma=2.334463
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00198554 Jy
! Component: 100  -  total flux cleaned = -0.00187502 Jy
! Component: 150  -  total flux cleaned = -0.00168063 Jy
! Component: 200  -  total flux cleaned = -0.00151496 Jy
! Total flux subtracted in 200 components = -0.00151496 Jy
! Clean residual min=-0.019885 max=0.017507 Jy/beam
! Clean residual mean=-0.000278 rms=0.005990 Jy/beam
! Combined flux in latest and established models = 2.14632 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 97 components and 2.14632 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.182739Jy  sigma=2.338666
! Fit after  self-cal, rms=0.182735Jy  sigma=2.337811
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.438 mas, bmaj=6.486 mas, bpa=0.8076 degrees
! Estimated noise=1.33333 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.438 x 6.486 at 0.8076 degrees (North through East)
! Clean map  min=-0.012898  max=1.2934 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.182735Jy  sigma=2.337811
! Fit after  self-cal, rms=0.176283Jy  sigma=2.197549
! Inverting map and beam 
! Estimated beam: bmin=2.426 mas, bmaj=6.478 mas, bpa=0.6701 degrees
! Estimated noise=1.30859 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0182502 Jy
! Component: 100  -  total flux cleaned = -0.0190925 Jy
! Component: 150  -  total flux cleaned = -0.0193779 Jy
! Component: 200  -  total flux cleaned = -0.0193528 Jy
! Total flux subtracted in 200 components = -0.0193528 Jy
! Clean residual min=-0.016284 max=0.015794 Jy/beam
! Clean residual mean=0.000020 rms=0.003847 Jy/beam
! Combined flux in latest and established models = 2.12697 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 104 components and 2.12697 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.173214Jy  sigma=2.163766
! Fit after  self-cal, rms=0.173149Jy  sigma=2.162962
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.63559e-06 Jy
! Component: 100  -  total flux cleaned = -0.000124919 Jy
! Component: 150  -  total flux cleaned = 0.000102005 Jy
! Component: 200  -  total flux cleaned = 9.66426e-05 Jy
! Total flux subtracted in 200 components = 9.66426e-05 Jy
! Clean residual min=-0.016270 max=0.015812 Jy/beam
! Clean residual mean=0.000020 rms=0.003793 Jy/beam
! Combined flux in latest and established models = 2.12707 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 110 components and 2.12707 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.172915Jy  sigma=2.160908
! Fit after  self-cal, rms=0.172890Jy  sigma=2.160588
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.172890Jy  sigma=2.160588
! Fit after  self-cal, rms=0.170779Jy  sigma=2.123451
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.067 mas, bmaj=5.783 mas, bpa=0.7877 degrees
! Estimated noise=1.49825 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.865286 Jy
! Component: 100  -  total flux cleaned = 1.25233 Jy
! Component: 150  -  total flux cleaned = 1.48143 Jy
! Component: 200  -  total flux cleaned = 1.63222 Jy
! Total flux subtracted in 200 components = 1.63222 Jy
! Clean residual min=-0.042032 max=0.086889 Jy/beam
! Clean residual mean=-0.000482 rms=0.013582 Jy/beam
! Combined flux in latest and established models = 1.63222 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 1.63222 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.419 mas, bmaj=6.473 mas, bpa=0.3913 degrees
! Estimated noise=1.29102 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.186887 Jy
! Component: 100  -  total flux cleaned = 0.296818 Jy
! Component: 150  -  total flux cleaned = 0.363411 Jy
! Component: 200  -  total flux cleaned = 0.405656 Jy
! Total flux subtracted in 200 components = 0.405656 Jy
! Clean residual min=-0.018880 max=0.030275 Jy/beam
! Clean residual mean=-0.000188 rms=0.005687 Jy/beam
! Combined flux in latest and established models = 2.03787 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 47 components and 2.03787 Jy
! Inverting map 
! Added new window around map position (-2.5, 2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0308759 Jy
! Component: 100  -  total flux cleaned = 0.0503196 Jy
! Component: 150  -  total flux cleaned = 0.0638738 Jy
! Component: 200  -  total flux cleaned = 0.0679799 Jy
! Total flux subtracted in 200 components = 0.0679799 Jy
! Clean residual min=-0.014936 max=0.015499 Jy/beam
! Clean residual mean=0.000008 rms=0.003997 Jy/beam
! Combined flux in latest and established models = 2.10585 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 66 components and 2.10585 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.158 mas, bmaj=16.47 mas, bpa=3.538 degrees
! Estimated noise=2.21773 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00384492 Jy
! Component: 100  -  total flux cleaned = 0.00424534 Jy
! Component: 150  -  total flux cleaned = 0.0039638 Jy
! Component: 200  -  total flux cleaned = 0.00370206 Jy
! Total flux subtracted in 200 components = 0.00370206 Jy
! Clean residual min=-0.019557 max=0.020050 Jy/beam
! Clean residual mean=0.000052 rms=0.006883 Jy/beam
! Combined flux in latest and established models = 2.10955 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000237036 Jy
! Component: 100  -  total flux cleaned = -0.000668156 Jy
! Component: 150  -  total flux cleaned = -0.00104998 Jy
! Component: 200  -  total flux cleaned = -0.00140314 Jy
! Total flux subtracted in 200 components = -0.00140314 Jy
! Clean residual min=-0.019233 max=0.019820 Jy/beam
! Clean residual mean=0.000039 rms=0.006694 Jy/beam
! Combined flux in latest and established models = 2.10815 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 85 components and 2.10815 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.419 mas, bmaj=6.473 mas, bpa=0.3913 degrees
! Estimated noise=1.29102 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00391868 Jy
! Component: 100  -  total flux cleaned = 0.0051706 Jy
! Component: 150  -  total flux cleaned = 0.00614215 Jy
! Component: 200  -  total flux cleaned = 0.00614498 Jy
! Total flux subtracted in 200 components = 0.00614498 Jy
! Clean residual min=-0.013787 max=0.014790 Jy/beam
! Clean residual mean=0.000031 rms=0.003669 Jy/beam
! Combined flux in latest and established models = 2.1143 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 99 components and 2.1143 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.168042Jy  sigma=2.091992
! Fit after  self-cal, rms=0.167970Jy  sigma=2.089529
wmodel /J1700-2610_S_map.mod
! wmodel: Unable to open new model file: /J1700-2610_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1700-2610_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.419 x 6.473 at 0.3913 degrees (North through East)
! Clean map  min=-0.012773  max=1.2618 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1700-2610_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.26182 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00364827 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.867381 0.867381 1.73476 3.46952 6.93905 13.8781 27.7562 55.5124
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0109 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.261 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  345.868 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1700-2610_S_dfm.log closed on Thu May 19 22:34:32 2016