! Started logfile: /scr/pima/bg219h_uvs/J1656+1826_X_dfm.log on Thu May 19 22:34:16 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J1656+1826_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1656+1826_X_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.948677 visibilities/baseline/integration-bin.
! Found source: J1656+1826
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 21516 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1656+1826_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.012418Jy  sigma=24.739480
! Fit after  self-cal, rms=0.884605Jy  sigma=21.458510
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6756 mas, bmaj=1.653 mas, bpa=-3.497 degrees
! Estimated noise=0.414865 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0812677 Jy
! Component: 100  -  total flux cleaned = 0.119131 Jy
! Total flux subtracted in 100 components = 0.119131 Jy
! Clean residual min=-0.009069 max=0.029379 Jy/beam
! Clean residual mean=-0.000019 rms=0.002502 Jy/beam
! Combined flux in latest and established models = 0.119131 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.119131 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085034Jy  sigma=1.982380
! Fit after  self-cal, rms=0.083060Jy  sigma=1.945116
! Inverting map 
! Added new window around map position (-0.8, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0307047 Jy
! Component: 100  -  total flux cleaned = 0.046935 Jy
! Total flux subtracted in 100 components = 0.046935 Jy
! Clean residual min=-0.004570 max=0.008036 Jy/beam
! Clean residual mean=-0.000010 rms=0.001173 Jy/beam
! Combined flux in latest and established models = 0.166066 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 11 components and 0.166066 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068081Jy  sigma=1.522210
! Fit after  self-cal, rms=0.067479Jy  sigma=1.509811
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0105054 Jy
! Component: 100  -  total flux cleaned = 0.0161881 Jy
! Total flux subtracted in 100 components = 0.0161881 Jy
! Clean residual min=-0.003441 max=0.007387 Jy/beam
! Clean residual mean=-0.000007 rms=0.000845 Jy/beam
! Combined flux in latest and established models = 0.182254 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 14 components and 0.182254 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065149Jy  sigma=1.440612
! Fit after  self-cal, rms=0.065097Jy  sigma=1.439736
! Inverting map 
! Added new window around map position (-2.4, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00661403 Jy
! Component: 100  -  total flux cleaned = 0.0104192 Jy
! Total flux subtracted in 100 components = 0.0104192 Jy
! Clean residual min=-0.002807 max=0.002921 Jy/beam
! Clean residual mean=-0.000005 rms=0.000690 Jy/beam
! Combined flux in latest and established models = 0.192673 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 21 components and 0.192673 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064123Jy  sigma=1.412682
! Fit after  self-cal, rms=0.064081Jy  sigma=1.410896
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.869 mas, bmaj=1.959 mas, bpa=-3.099 degrees
! Estimated noise=0.206681 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00568986 Jy
! Component: 100  -  total flux cleaned = 0.00926428 Jy
! Component: 150  -  total flux cleaned = 0.0116293 Jy
! Component: 200  -  total flux cleaned = 0.0132472 Jy
! Total flux subtracted in 200 components = 0.0132472 Jy
! Clean residual min=-0.002177 max=0.002348 Jy/beam
! Clean residual mean=-0.000005 rms=0.000462 Jy/beam
! Combined flux in latest and established models = 0.205921 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 35 components and 0.205921 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063533Jy  sigma=1.395605
! Fit after  self-cal, rms=0.063507Jy  sigma=1.394545
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.869 x 1.959 at -3.099 degrees (North through East)
! Clean map  min=-0.0018205  max=0.1157 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.08     KP        1.00     
!   LA        0.99     MK        1.03     NL        1.00     OV        1.01     
!   PT        0.95     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.11     KP        0.98     
!   LA        1.00     MK        0.98     NL        0.99     OV        1.02     
!   PT        0.97     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.05     KP        1.00     
!   LA        1.00     MK        1.00     NL        1.00     OV        0.98     
!   PT        0.97     SC        0.95     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.05     KP        0.95     
!   LA        1.00     MK        1.01     NL        1.01     OV        1.01     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.07     KP        0.97     
!   LA        0.98     MK        0.99     NL        0.98     OV        1.01     
!   PT        0.94     SC        1.03     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.04     KP        0.99     
!   LA        1.02     MK        0.95     NL        1.00     OV        0.99     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.16     KP        0.99     
!   LA        1.00     MK        0.92     NL        0.95     OV        1.01     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.10     KP        0.97     
!   LA        1.02     MK        0.98     NL        1.00     OV        1.01     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.11     KP        0.98     
!   LA        0.99     MK        1.04     NL        0.98     OV        1.00     
!   PT        0.97     SC        0.96     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.06     KP        0.98     
!   LA        1.01     MK        1.05     NL        0.98     OV        1.02     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.10     KP        1.01     
!   LA        1.00     MK        0.96     NL        1.00     OV        0.98     
!   PT        0.96     SC        0.90     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.03     KP        1.03     
!   LA        1.02     MK        0.91     NL        1.01     OV        1.01     
!   PT        0.97     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.063507Jy  sigma=1.394545
! Fit after  self-cal, rms=0.064514Jy  sigma=1.388908
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8682 mas, bmaj=1.96 mas, bpa=-2.895 degrees
! Estimated noise=0.205406 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000551047 Jy
! Component: 100  -  total flux cleaned = 0.000759603 Jy
! Component: 150  -  total flux cleaned = 0.000838414 Jy
! Component: 200  -  total flux cleaned = 0.000838631 Jy
! Total flux subtracted in 200 components = 0.000838631 Jy
! Clean residual min=-0.001542 max=0.001408 Jy/beam
! Clean residual mean=-0.000001 rms=0.000348 Jy/beam
! Combined flux in latest and established models = 0.206759 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 44 components and 0.206759 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064492Jy  sigma=1.388414
! Fit after  self-cal, rms=0.064528Jy  sigma=1.388251
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064528Jy  sigma=1.388251
! Fit after  self-cal, rms=0.064297Jy  sigma=1.385167
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8664 mas, bmaj=1.958 mas, bpa=-3.016 degrees
! Estimated noise=0.205095 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000376933 Jy
! Component: 100  -  total flux cleaned = 0.000496023 Jy
! Component: 150  -  total flux cleaned = 0.000588579 Jy
! Component: 200  -  total flux cleaned = 0.000599801 Jy
! Total flux subtracted in 200 components = 0.000599801 Jy
! Clean residual min=-0.001233 max=0.001298 Jy/beam
! Clean residual mean=-0.000001 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.207359 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 53 components and 0.207359 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064289Jy  sigma=1.384960
! Fit after  self-cal, rms=0.064291Jy  sigma=1.384895
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-38.4, 22.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0011217 Jy
! Component: 100  -  total flux cleaned = 0.00153704 Jy
! Component: 150  -  total flux cleaned = 0.00162629 Jy
! Component: 200  -  total flux cleaned = 0.00170675 Jy
! Total flux subtracted in 200 components = 0.00170675 Jy
! Clean residual min=-0.001223 max=0.001204 Jy/beam
! Clean residual mean=-0.000000 rms=0.000292 Jy/beam
! Combined flux in latest and established models = 0.209066 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 67 components and 0.209066 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064263Jy  sigma=1.384429
! Fit after  self-cal, rms=0.064259Jy  sigma=1.384368
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064259Jy  sigma=1.384368
! Fit after  self-cal, rms=0.064223Jy  sigma=1.384330
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8659 mas, bmaj=1.958 mas, bpa=-3.026 degrees
! Estimated noise=0.204933 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000508035 Jy
! Component: 100  -  total flux cleaned = 0.000686566 Jy
! Component: 150  -  total flux cleaned = 0.000788725 Jy
! Component: 200  -  total flux cleaned = 0.000844113 Jy
! Total flux subtracted in 200 components = 0.000844113 Jy
! Clean residual min=-0.001179 max=0.001167 Jy/beam
! Clean residual mean=-0.000000 rms=0.000287 Jy/beam
! Combined flux in latest and established models = 0.20991 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 74 components and 0.20991 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064213Jy  sigma=1.384170
! Fit after  self-cal, rms=0.064213Jy  sigma=1.384163
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000144986 Jy
! Component: 100  -  total flux cleaned = 0.0001847 Jy
! Component: 150  -  total flux cleaned = 0.00023504 Jy
! Component: 200  -  total flux cleaned = 0.000283139 Jy
! Total flux subtracted in 200 components = 0.000283139 Jy
! Clean residual min=-0.001178 max=0.001154 Jy/beam
! Clean residual mean=-0.000000 rms=0.000286 Jy/beam
! Combined flux in latest and established models = 0.210193 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 79 components and 0.210193 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064208Jy  sigma=1.384051
! Fit after  self-cal, rms=0.064207Jy  sigma=1.384045
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064207Jy  sigma=1.384045
! Fit after  self-cal, rms=0.064198Jy  sigma=1.384037
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.071 mas, bmaj=2.874 mas, bpa=-2.2 degrees
! Estimated noise=0.259364 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000451944 Jy
! Component: 100  -  total flux cleaned = 0.000437887 Jy
! Component: 150  -  total flux cleaned = 0.000451191 Jy
! Component: 200  -  total flux cleaned = 0.000462992 Jy
! Total flux subtracted in 200 components = 0.000462992 Jy
! Clean residual min=-0.001266 max=0.001435 Jy/beam
! Clean residual mean=-0.000000 rms=0.000360 Jy/beam
! Combined flux in latest and established models = 0.210656 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 88 components and 0.210656 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064197Jy  sigma=1.384021
! Fit after  self-cal, rms=0.064195Jy  sigma=1.383991
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.83859e-05 Jy
! Component: 100  -  total flux cleaned = 9.96691e-05 Jy
! Component: 150  -  total flux cleaned = 0.000109123 Jy
! Component: 200  -  total flux cleaned = 0.000109339 Jy
! Total flux subtracted in 200 components = 0.000109339 Jy
! Clean residual min=-0.001274 max=0.001442 Jy/beam
! Clean residual mean=0.000000 rms=0.000356 Jy/beam
! Combined flux in latest and established models = 0.210765 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 97 components and 0.210765 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064195Jy  sigma=1.384002
! Fit after  self-cal, rms=0.064194Jy  sigma=1.383983
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8658 mas, bmaj=1.958 mas, bpa=-3.031 degrees
! Estimated noise=0.204898 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8658 x 1.958 at -3.031 degrees (North through East)
! Clean map  min=-0.001077  max=0.11456 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6712 mas, bmaj=1.652 mas, bpa=-3.516 degrees
! Estimated noise=0.409217 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0837132 Jy
! Component: 100  -  total flux cleaned = 0.127275 Jy
! Component: 150  -  total flux cleaned = 0.151607 Jy
! Component: 200  -  total flux cleaned = 0.165725 Jy
! Total flux subtracted in 200 components = 0.165725 Jy
! Clean residual min=-0.004422 max=0.007565 Jy/beam
! Clean residual mean=-0.000008 rms=0.001071 Jy/beam
! Combined flux in latest and established models = 0.165725 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.165725 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8658 mas, bmaj=1.958 mas, bpa=-3.031 degrees
! Estimated noise=0.204898 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0152161 Jy
! Component: 100  -  total flux cleaned = 0.024312 Jy
! Component: 150  -  total flux cleaned = 0.0300484 Jy
! Component: 200  -  total flux cleaned = 0.0337963 Jy
! Total flux subtracted in 200 components = 0.0337963 Jy
! Clean residual min=-0.001465 max=0.002003 Jy/beam
! Clean residual mean=-0.000005 rms=0.000412 Jy/beam
! Combined flux in latest and established models = 0.199521 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 28 components and 0.199521 Jy
! Inverting map 
! Added new window around map position (-1.6, -0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00250319 Jy
! Component: 100  -  total flux cleaned = 0.00430611 Jy
! Component: 150  -  total flux cleaned = 0.00566219 Jy
! Component: 200  -  total flux cleaned = 0.0067474 Jy
! Total flux subtracted in 200 components = 0.0067474 Jy
! Clean residual min=-0.001251 max=0.001281 Jy/beam
! Clean residual mean=-0.000002 rms=0.000305 Jy/beam
! Combined flux in latest and established models = 0.206268 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 57 components and 0.206268 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.071 mas, bmaj=2.874 mas, bpa=-2.2 degrees
! Estimated noise=0.259364 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00158366 Jy
! Component: 100  -  total flux cleaned = 0.00256596 Jy
! Component: 150  -  total flux cleaned = 0.00327509 Jy
! Component: 200  -  total flux cleaned = 0.00381488 Jy
! Total flux subtracted in 200 components = 0.00381488 Jy
! Clean residual min=-0.001306 max=0.001447 Jy/beam
! Clean residual mean=-0.000000 rms=0.000355 Jy/beam
! Combined flux in latest and established models = 0.210083 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000420862 Jy
! Component: 100  -  total flux cleaned = 0.000678009 Jy
! Component: 150  -  total flux cleaned = 0.000748101 Jy
! Component: 200  -  total flux cleaned = 0.000790239 Jy
! Total flux subtracted in 200 components = 0.000790239 Jy
! Clean residual min=-0.001276 max=0.001395 Jy/beam
! Clean residual mean=0.000000 rms=0.000350 Jy/beam
! Combined flux in latest and established models = 0.210873 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 93 components and 0.210873 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8658 mas, bmaj=1.958 mas, bpa=-3.031 degrees
! Estimated noise=0.204898 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.76326e-05 Jy
! Component: 100  -  total flux cleaned = -7.67167e-05 Jy
! Component: 150  -  total flux cleaned = -2.09813e-05 Jy
! Component: 200  -  total flux cleaned = 8.19442e-05 Jy
! Total flux subtracted in 200 components = 8.19442e-05 Jy
! Clean residual min=-0.001175 max=0.001238 Jy/beam
! Clean residual mean=0.000000 rms=0.000280 Jy/beam
! Combined flux in latest and established models = 0.210955 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 107 components and 0.210955 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064193Jy  sigma=1.383921
! Fit after  self-cal, rms=0.064184Jy  sigma=1.383825
wmodel /J1656+1826_X_map.mod
! wmodel: Unable to open new model file: /J1656+1826_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1656+1826_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8658 x 1.958 at -3.031 degrees (North through East)
! Clean map  min=-0.0010885  max=0.11474 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1656+1826_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.114741 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000278773 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.728875 0.728875 1.45775 2.9155 5.831 11.662 23.324 46.648 93.296
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.114 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  411.593 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1656+1826_X_dfm.log closed on Thu May 19 22:34:19 2016