! Started logfile: /scr/pima/bg219h_uvs/J1651+2135_X_dfm.log on Thu May 19 22:34:08 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J1651+2135_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1651+2135_X_uva.fits
! AN table 1: 61 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.956284 visibilities/baseline/integration-bin.
! Found source: J1651+2135
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 31500 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1651+2135_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006867Jy  sigma=24.442515
! Fit after  self-cal, rms=0.926013Jy  sigma=22.431479
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7227 mas, bmaj=1.566 mas, bpa=-2.364 degrees
! Estimated noise=0.411894 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0580329 Jy
! Component: 100  -  total flux cleaned = 0.0719386 Jy
! Total flux subtracted in 100 components = 0.0719386 Jy
! Clean residual min=-0.002868 max=0.005399 Jy/beam
! Clean residual mean=0.000000 rms=0.000747 Jy/beam
! Combined flux in latest and established models = 0.0719386 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0719386 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070770Jy  sigma=1.444018
! Fit after  self-cal, rms=0.070214Jy  sigma=1.431377
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00596491 Jy
! Component: 100  -  total flux cleaned = 0.00873687 Jy
! Total flux subtracted in 100 components = 0.00873687 Jy
! Clean residual min=-0.002491 max=0.003036 Jy/beam
! Clean residual mean=-0.000001 rms=0.000625 Jy/beam
! Combined flux in latest and established models = 0.0806755 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 8 components and 0.0806755 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069653Jy  sigma=1.411775
! Fit after  self-cal, rms=0.069659Jy  sigma=1.411458
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9283 mas, bmaj=1.895 mas, bpa=-1.766 degrees
! Estimated noise=0.177456 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.4, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00403396 Jy
! Component: 100  -  total flux cleaned = 0.00630662 Jy
! Component: 150  -  total flux cleaned = 0.00777055 Jy
! Component: 200  -  total flux cleaned = 0.00816427 Jy
! Total flux subtracted in 200 components = 0.00816427 Jy
! Clean residual min=-0.001353 max=0.002181 Jy/beam
! Clean residual mean=-0.000003 rms=0.000348 Jy/beam
! Combined flux in latest and established models = 0.0888398 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 38 components and 0.0888398 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069431Jy  sigma=1.404086
! Fit after  self-cal, rms=0.069404Jy  sigma=1.403180
! Inverting map 
! Added new window around map position (-3.2, 0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0020182 Jy
! Component: 100  -  total flux cleaned = 0.00262678 Jy
! Component: 150  -  total flux cleaned = 0.00273051 Jy
! Component: 200  -  total flux cleaned = 0.00275957 Jy
! Total flux subtracted in 200 components = 0.00275957 Jy
! Clean residual min=-0.001149 max=0.001259 Jy/beam
! Clean residual mean=-0.000003 rms=0.000286 Jy/beam
! Combined flux in latest and established models = 0.0915993 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 57 components and 0.0915993 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069332Jy  sigma=1.401421
! Fit after  self-cal, rms=0.069333Jy  sigma=1.401175
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9283 x 1.895 at -1.766 degrees (North through East)
! Clean map  min=-0.001096  max=0.076546 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.10     KP        1.04     
!   LA        1.01     MK        0.96     NL        0.97     OV        1.06     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.96     HN        1.04     KP        1.00     
!   LA        0.99     MK        1.06     NL        0.98     OV        1.05     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.01     KP        1.02     
!   LA        0.96     MK        1.02     NL        0.99     OV        0.96     
!   PT        0.99     SC        1.08     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.00     HN        1.12     KP        1.00     
!   LA        1.02     MK        1.01     NL        1.01     OV        0.98     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.05     KP        0.96     
!   LA        1.00     MK        0.99     NL        1.01     OV        0.99     
!   PT        1.04     SC        0.95     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.94     HN        1.07     KP        1.03     
!   LA        0.96     MK        0.98     NL        1.04     OV        1.01     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.99     HN        1.13     KP        1.03     
!   LA        1.02     MK        0.96     NL        0.95     OV        0.98     
!   PT        1.02     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.04     KP        1.01     
!   LA        0.96     MK        0.97     NL        1.00     OV        1.01     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        1.06     KP        1.01     
!   LA        1.00     MK        0.99     NL        1.02     OV        1.02     
!   PT        0.97     SC        0.95     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.06     HN        1.03     KP        0.97     
!   LA        0.97     MK        1.00     NL        0.99     OV        0.98     
!   PT        0.98     SC        0.96     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        1.09     KP        0.95     
!   LA        1.04     MK        0.95     NL        0.95     OV        0.99     
!   PT        1.00     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.069333Jy  sigma=1.401175
! Fit after  self-cal, rms=0.070698Jy  sigma=1.398996
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9286 mas, bmaj=1.892 mas, bpa=-1.524 degrees
! Estimated noise=0.176586 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000390778 Jy
! Component: 100  -  total flux cleaned = 0.000435145 Jy
! Component: 150  -  total flux cleaned = 0.000434722 Jy
! Component: 200  -  total flux cleaned = 0.000417349 Jy
! Total flux subtracted in 200 components = 0.000417349 Jy
! Clean residual min=-0.001008 max=0.001192 Jy/beam
! Clean residual mean=-0.000003 rms=0.000247 Jy/beam
! Combined flux in latest and established models = 0.0920167 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 77 components and 0.0920167 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070683Jy  sigma=1.398629
! Fit after  self-cal, rms=0.070710Jy  sigma=1.398526
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070710Jy  sigma=1.398526
! Fit after  self-cal, rms=0.071474Jy  sigma=1.397177
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9288 mas, bmaj=1.887 mas, bpa=-1.601 degrees
! Estimated noise=0.176474 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.59586e-05 Jy
! Component: 100  -  total flux cleaned = 9.96279e-05 Jy
! Component: 150  -  total flux cleaned = 0.000137734 Jy
! Component: 200  -  total flux cleaned = 0.000172233 Jy
! Total flux subtracted in 200 components = 0.000172233 Jy
! Clean residual min=-0.001047 max=0.001145 Jy/beam
! Clean residual mean=-0.000003 rms=0.000238 Jy/beam
! Combined flux in latest and established models = 0.0921889 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 92 components and 0.0921889 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071469Jy  sigma=1.397037
! Fit after  self-cal, rms=0.071478Jy  sigma=1.396985
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-8.2, 46).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000690979 Jy
! Component: 100  -  total flux cleaned = 0.000694418 Jy
! Component: 150  -  total flux cleaned = 0.000623111 Jy
! Component: 200  -  total flux cleaned = 0.000653257 Jy
! Total flux subtracted in 200 components = 0.000653257 Jy
! Clean residual min=-0.000999 max=0.001021 Jy/beam
! Clean residual mean=-0.000003 rms=0.000229 Jy/beam
! Combined flux in latest and established models = 0.0928422 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 104 components and 0.0928422 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071458Jy  sigma=1.396587
! Fit after  self-cal, rms=0.071454Jy  sigma=1.396556
! Inverting map 
! Added new window around map position (-25.8, -46.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000470816 Jy
! Component: 100  -  total flux cleaned = 0.000563455 Jy
! Component: 150  -  total flux cleaned = 0.00069091 Jy
! Component: 200  -  total flux cleaned = 0.000738345 Jy
! Total flux subtracted in 200 components = 0.000738345 Jy
! Clean residual min=-0.000945 max=0.000937 Jy/beam
! Clean residual mean=-0.000003 rms=0.000221 Jy/beam
! Combined flux in latest and established models = 0.0935805 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 117 components and 0.0935805 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071432Jy  sigma=1.396200
! Fit after  self-cal, rms=0.071433Jy  sigma=1.396165
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071433Jy  sigma=1.396165
! Fit after  self-cal, rms=0.071503Jy  sigma=1.396127
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9295 mas, bmaj=1.887 mas, bpa=-1.548 degrees
! Estimated noise=0.176341 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000178096 Jy
! Component: 100  -  total flux cleaned = 0.000192722 Jy
! Component: 150  -  total flux cleaned = 0.000206628 Jy
! Component: 200  -  total flux cleaned = 0.00023158 Jy
! Total flux subtracted in 200 components = 0.00023158 Jy
! Clean residual min=-0.000924 max=0.000926 Jy/beam
! Clean residual mean=-0.000003 rms=0.000218 Jy/beam
! Combined flux in latest and established models = 0.0938121 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 126 components and 0.0938121 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071494Jy  sigma=1.396014
! Fit after  self-cal, rms=0.071497Jy  sigma=1.396008
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.17693e-05 Jy
! Component: 100  -  total flux cleaned = 1.23774e-05 Jy
! Component: 150  -  total flux cleaned = 5.89177e-05 Jy
! Component: 200  -  total flux cleaned = 9.22554e-05 Jy
! Total flux subtracted in 200 components = 9.22554e-05 Jy
! Clean residual min=-0.000916 max=0.000923 Jy/beam
! Clean residual mean=-0.000003 rms=0.000217 Jy/beam
! Combined flux in latest and established models = 0.0939043 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 130 components and 0.0939043 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071492Jy  sigma=1.395933
! Fit after  self-cal, rms=0.071492Jy  sigma=1.395931
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071492Jy  sigma=1.395931
! Fit after  self-cal, rms=0.071888Jy  sigma=1.395827
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.113 mas, bmaj=2.867 mas, bpa=-1.979 degrees
! Estimated noise=0.211484 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000121698 Jy
! Component: 100  -  total flux cleaned = 0.000182057 Jy
! Component: 150  -  total flux cleaned = 0.000259396 Jy
! Component: 200  -  total flux cleaned = 0.000319499 Jy
! Total flux subtracted in 200 components = 0.000319499 Jy
! Clean residual min=-0.000994 max=0.001013 Jy/beam
! Clean residual mean=-0.000006 rms=0.000253 Jy/beam
! Combined flux in latest and established models = 0.0942238 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 143 components and 0.0942238 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071885Jy  sigma=1.395790
! Fit after  self-cal, rms=0.071888Jy  sigma=1.395779
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.98242e-05 Jy
! Component: 100  -  total flux cleaned = 6.71501e-05 Jy
! Component: 150  -  total flux cleaned = 0.000101244 Jy
! Component: 200  -  total flux cleaned = 0.00012512 Jy
! Total flux subtracted in 200 components = 0.00012512 Jy
! Clean residual min=-0.000977 max=0.001015 Jy/beam
! Clean residual mean=-0.000006 rms=0.000251 Jy/beam
! Combined flux in latest and established models = 0.094349 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 147 components and 0.094349 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071886Jy  sigma=1.395768
! Fit after  self-cal, rms=0.071886Jy  sigma=1.395763
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.93 mas, bmaj=1.886 mas, bpa=-1.506 degrees
! Estimated noise=0.176458 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.93 x 1.886 at -1.506 degrees (North through East)
! Clean map  min=-0.00098372  max=0.07596 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7219 mas, bmaj=1.555 mas, bpa=-2.036 degrees
! Estimated noise=0.411074 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0580185 Jy
! Component: 100  -  total flux cleaned = 0.0721548 Jy
! Component: 150  -  total flux cleaned = 0.0779447 Jy
! Component: 200  -  total flux cleaned = 0.0811758 Jy
! Total flux subtracted in 200 components = 0.0811758 Jy
! Clean residual min=-0.002222 max=0.002616 Jy/beam
! Clean residual mean=-0.000000 rms=0.000589 Jy/beam
! Combined flux in latest and established models = 0.0811757 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.0811757 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.93 mas, bmaj=1.886 mas, bpa=-1.506 degrees
! Estimated noise=0.176458 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0040166 Jy
! Component: 100  -  total flux cleaned = 0.0064705 Jy
! Component: 150  -  total flux cleaned = 0.00818937 Jy
! Component: 200  -  total flux cleaned = 0.00944383 Jy
! Total flux subtracted in 200 components = 0.00944383 Jy
! Clean residual min=-0.001110 max=0.001021 Jy/beam
! Clean residual mean=-0.000003 rms=0.000268 Jy/beam
! Combined flux in latest and established models = 0.0906196 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 43 components and 0.0906195 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.113 mas, bmaj=2.867 mas, bpa=-1.979 degrees
! Estimated noise=0.211484 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00126726 Jy
! Component: 100  -  total flux cleaned = 0.00183432 Jy
! Component: 150  -  total flux cleaned = 0.00232069 Jy
! Component: 200  -  total flux cleaned = 0.00276169 Jy
! Total flux subtracted in 200 components = 0.00276169 Jy
! Clean residual min=-0.001094 max=0.001012 Jy/beam
! Clean residual mean=-0.000006 rms=0.000274 Jy/beam
! Combined flux in latest and established models = 0.0933812 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000259066 Jy
! Component: 100  -  total flux cleaned = 0.000454205 Jy
! Component: 150  -  total flux cleaned = 0.000578517 Jy
! Component: 200  -  total flux cleaned = 0.000676464 Jy
! Total flux subtracted in 200 components = 0.000676464 Jy
! Clean residual min=-0.000995 max=0.000922 Jy/beam
! Clean residual mean=-0.000006 rms=0.000261 Jy/beam
! Combined flux in latest and established models = 0.0940577 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 87 components and 0.0940577 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.93 mas, bmaj=1.886 mas, bpa=-1.506 degrees
! Estimated noise=0.176458 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.64852e-05 Jy
! Component: 100  -  total flux cleaned = -0.000169474 Jy
! Component: 150  -  total flux cleaned = -0.000240541 Jy
! Component: 200  -  total flux cleaned = -0.000282626 Jy
! Total flux subtracted in 200 components = -0.000282626 Jy
! Clean residual min=-0.000946 max=0.000908 Jy/beam
! Clean residual mean=-0.000003 rms=0.000223 Jy/beam
! Combined flux in latest and established models = 0.0937751 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 104 components and 0.093775 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071913Jy  sigma=1.396225
! Fit after  self-cal, rms=0.071908Jy  sigma=1.396154
wmodel /J1651+2135_X_map.mod
! wmodel: Unable to open new model file: /J1651+2135_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1651+2135_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.93 x 1.886 at -1.506 degrees (North through East)
! Clean map  min=-0.00086693  max=0.07615 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1651+2135_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0761498 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000220871 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.870145 0.870145 1.74029 3.48058 6.96116 13.9223 27.8446 55.6893
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.076 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  344.77 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1651+2135_X_dfm.log closed on Thu May 19 22:34:11 2016