! Started logfile: /scr/pima/bg219h_uvs/J1644+1813_X_dfm.log on Thu May 19 22:33:43 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J1644+1813_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1644+1813_X_uva.fits
! AN table 1: 36 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.779012 visibilities/baseline/integration-bin.
! Found source: J1644+1813
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 15144 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1644+1813_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007488Jy  sigma=24.815778
! Fit after  self-cal, rms=0.906714Jy  sigma=22.222929
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6903 mas, bmaj=1.822 mas, bpa=-7.011 degrees
! Estimated noise=0.448144 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0722575 Jy
! Component: 100  -  total flux cleaned = 0.0961493 Jy
! Total flux subtracted in 100 components = 0.0961493 Jy
! Clean residual min=-0.006192 max=0.018450 Jy/beam
! Clean residual mean=-0.000019 rms=0.001605 Jy/beam
! Combined flux in latest and established models = 0.0961493 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0961493 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070230Jy  sigma=1.586070
! Fit after  self-cal, rms=0.069483Jy  sigma=1.570022
! Inverting map 
! Added new window around map position (-0.8, 2.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0169214 Jy
! Component: 100  -  total flux cleaned = 0.0257074 Jy
! Total flux subtracted in 100 components = 0.0257074 Jy
! Clean residual min=-0.004444 max=0.004716 Jy/beam
! Clean residual mean=-0.000009 rms=0.000973 Jy/beam
! Combined flux in latest and established models = 0.121857 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 21 components and 0.121857 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064769Jy  sigma=1.431076
! Fit after  self-cal, rms=0.064271Jy  sigma=1.420150
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00735303 Jy
! Component: 100  -  total flux cleaned = 0.0117606 Jy
! Total flux subtracted in 100 components = 0.0117606 Jy
! Clean residual min=-0.003150 max=0.003064 Jy/beam
! Clean residual mean=-0.000005 rms=0.000764 Jy/beam
! Combined flux in latest and established models = 0.133617 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 33 components and 0.133617 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063212Jy  sigma=1.387070
! Fit after  self-cal, rms=0.063104Jy  sigma=1.384777
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8639 mas, bmaj=2.079 mas, bpa=-9.142 degrees
! Estimated noise=0.262626 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00555998 Jy
! Component: 100  -  total flux cleaned = 0.0091411 Jy
! Component: 150  -  total flux cleaned = 0.0116253 Jy
! Component: 200  -  total flux cleaned = 0.01344 Jy
! Total flux subtracted in 200 components = 0.01344 Jy
! Clean residual min=-0.001904 max=0.001923 Jy/beam
! Clean residual mean=-0.000003 rms=0.000481 Jy/beam
! Combined flux in latest and established models = 0.147057 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 64 components and 0.147057 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062578Jy  sigma=1.368179
! Fit after  self-cal, rms=0.062541Jy  sigma=1.367092
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8639 x 2.079 at -9.142 degrees (North through East)
! Clean map  min=-0.0017918  max=0.092713 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.13     KP        0.97     
!   LA        1.00     MK        1.01     NL        1.06     OV        1.01     
!   PT        0.92     SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.00     HN        1.06     KP        0.97     
!   LA        0.98     MK        0.98     NL        1.01     OV        0.99     
!   PT        0.98     SC        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.02     HN        1.07     KP        0.96     
!   LA        0.99     MK        1.00     NL        0.96     OV        0.99     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.09     KP        0.95     
!   LA        0.98     MK        0.98     NL        0.97     OV        1.01     
!   PT        0.97     SC        1.04     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        1.07     KP        0.96     
!   LA        1.03     MK        1.00     NL        1.00     OV        1.03     
!   PT        0.92     SC        1.06     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.10     KP        0.95     
!   LA        0.99     MK        1.00     NL        1.09     OV        0.99     
!   PT        0.95     SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.07     KP        0.98     
!   LA        0.99     MK        0.99     NL        0.96     OV        0.98     
!   PT        1.02     SC        0.95     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        1.06     KP        1.00     
!   LA        0.98     MK        0.99     NL        0.98     OV        1.01     
!   PT        0.98     SC        1.04     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        0.92     KP        1.03     
!   LA        0.96     MK        1.02     NL        0.97     OV        0.98     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.05     HN        1.13     KP        1.00     
!   LA        0.94     MK        1.01     NL        1.00     OV        1.02     
!   PT        0.98     SC        0.95     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.02     HN        0.99     KP        0.97     
!   LA        0.98     MK        1.03     NL        0.98     OV        1.01     
!   PT        0.96     SC        1.05     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.98     HN        0.95     KP        0.95     
!   LA        0.97     MK        1.03     NL        0.97     OV        0.99     
!   PT        0.97     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.062541Jy  sigma=1.367092
! Fit after  self-cal, rms=0.063090Jy  sigma=1.361157
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8681 mas, bmaj=2.089 mas, bpa=-9.063 degrees
! Estimated noise=0.26096 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000702651 Jy
! Component: 100  -  total flux cleaned = 0.00091957 Jy
! Component: 150  -  total flux cleaned = 0.000967715 Jy
! Component: 200  -  total flux cleaned = 0.00102364 Jy
! Total flux subtracted in 200 components = 0.00102364 Jy
! Clean residual min=-0.001616 max=0.001682 Jy/beam
! Clean residual mean=-0.000000 rms=0.000377 Jy/beam
! Combined flux in latest and established models = 0.148081 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 74 components and 0.148081 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063065Jy  sigma=1.360342
! Fit after  self-cal, rms=0.063094Jy  sigma=1.360094
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063094Jy  sigma=1.360094
! Fit after  self-cal, rms=0.062954Jy  sigma=1.356589
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8684 mas, bmaj=2.076 mas, bpa=-8.851 degrees
! Estimated noise=0.260182 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00030417 Jy
! Component: 100  -  total flux cleaned = 0.000322492 Jy
! Component: 150  -  total flux cleaned = 0.000353793 Jy
! Component: 200  -  total flux cleaned = 0.000366833 Jy
! Total flux subtracted in 200 components = 0.000366833 Jy
! Clean residual min=-0.001549 max=0.001511 Jy/beam
! Clean residual mean=0.000000 rms=0.000354 Jy/beam
! Combined flux in latest and established models = 0.148448 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 83 components and 0.148448 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062945Jy  sigma=1.356306
! Fit after  self-cal, rms=0.062965Jy  sigma=1.356191
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.37023e-05 Jy
! Component: 100  -  total flux cleaned = 7.01133e-05 Jy
! Component: 150  -  total flux cleaned = 8.24034e-05 Jy
! Component: 200  -  total flux cleaned = 0.000105647 Jy
! Total flux subtracted in 200 components = 0.000105647 Jy
! Clean residual min=-0.001559 max=0.001511 Jy/beam
! Clean residual mean=0.000000 rms=0.000353 Jy/beam
! Combined flux in latest and established models = 0.148553 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 86 components and 0.148553 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062960Jy  sigma=1.356045
! Fit after  self-cal, rms=0.062960Jy  sigma=1.356024
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062960Jy  sigma=1.356024
! Fit after  self-cal, rms=0.062819Jy  sigma=1.355983
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8683 mas, bmaj=2.07 mas, bpa=-8.738 degrees
! Estimated noise=0.259495 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000143738 Jy
! Component: 100  -  total flux cleaned = 0.00015823 Jy
! Component: 150  -  total flux cleaned = 0.00016973 Jy
! Component: 200  -  total flux cleaned = 0.000169194 Jy
! Total flux subtracted in 200 components = 0.000169194 Jy
! Clean residual min=-0.001554 max=0.001481 Jy/beam
! Clean residual mean=0.000000 rms=0.000349 Jy/beam
! Combined flux in latest and established models = 0.148723 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 89 components and 0.148723 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062815Jy  sigma=1.355833
! Fit after  self-cal, rms=0.062817Jy  sigma=1.355811
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.23997e-05 Jy
! Component: 100  -  total flux cleaned = 2.24324e-05 Jy
! Component: 150  -  total flux cleaned = 2.25547e-05 Jy
! Component: 200  -  total flux cleaned = 2.24184e-05 Jy
! Total flux subtracted in 200 components = 2.24184e-05 Jy
! Clean residual min=-0.001551 max=0.001480 Jy/beam
! Clean residual mean=0.000000 rms=0.000348 Jy/beam
! Combined flux in latest and established models = 0.148745 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 92 components and 0.148745 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062814Jy  sigma=1.355718
! Fit after  self-cal, rms=0.062814Jy  sigma=1.355706
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062814Jy  sigma=1.355706
! Fit after  self-cal, rms=0.062693Jy  sigma=1.355686
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.118 mas, bmaj=2.983 mas, bpa=-2.48 degrees
! Estimated noise=0.329626 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000269255 Jy
! Component: 100  -  total flux cleaned = 0.000282458 Jy
! Component: 150  -  total flux cleaned = 0.000293619 Jy
! Component: 200  -  total flux cleaned = 0.000293 Jy
! Total flux subtracted in 200 components = 0.000293 Jy
! Clean residual min=-0.001618 max=0.001773 Jy/beam
! Clean residual mean=0.000001 rms=0.000444 Jy/beam
! Combined flux in latest and established models = 0.149038 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 100 components and 0.149038 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062693Jy  sigma=1.355626
! Fit after  self-cal, rms=0.062694Jy  sigma=1.355607
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.31204e-05 Jy
! Component: 100  -  total flux cleaned = 8.38615e-05 Jy
! Component: 150  -  total flux cleaned = 9.3211e-05 Jy
! Component: 200  -  total flux cleaned = 9.32746e-05 Jy
! Total flux subtracted in 200 components = 9.32746e-05 Jy
! Clean residual min=-0.001612 max=0.001761 Jy/beam
! Clean residual mean=0.000001 rms=0.000442 Jy/beam
! Combined flux in latest and established models = 0.149131 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 102 components and 0.149131 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062696Jy  sigma=1.355603
! Fit after  self-cal, rms=0.062683Jy  sigma=1.355552
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8681 mas, bmaj=2.065 mas, bpa=-8.64 degrees
! Estimated noise=0.258951 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8681 x 2.065 at -8.64 degrees (North through East)
! Clean map  min=-0.001458  max=0.091229 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6915 mas, bmaj=1.812 mas, bpa=-6.462 degrees
! Estimated noise=0.441694 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0711823 Jy
! Component: 100  -  total flux cleaned = 0.100116 Jy
! Component: 150  -  total flux cleaned = 0.116077 Jy
! Component: 200  -  total flux cleaned = 0.125106 Jy
! Total flux subtracted in 200 components = 0.125106 Jy
! Clean residual min=-0.003179 max=0.004602 Jy/beam
! Clean residual mean=-0.000007 rms=0.000841 Jy/beam
! Combined flux in latest and established models = 0.125107 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.125107 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8681 mas, bmaj=2.065 mas, bpa=-8.64 degrees
! Estimated noise=0.258951 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00777414 Jy
! Component: 100  -  total flux cleaned = 0.0125652 Jy
! Component: 150  -  total flux cleaned = 0.0158636 Jy
! Component: 200  -  total flux cleaned = 0.0182075 Jy
! Total flux subtracted in 200 components = 0.0182075 Jy
! Clean residual min=-0.001701 max=0.001594 Jy/beam
! Clean residual mean=-0.000002 rms=0.000408 Jy/beam
! Combined flux in latest and established models = 0.143314 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 63 components and 0.143314 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.118 mas, bmaj=2.983 mas, bpa=-2.48 degrees
! Estimated noise=0.329626 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00258635 Jy
! Component: 100  -  total flux cleaned = 0.00399823 Jy
! Component: 150  -  total flux cleaned = 0.00483297 Jy
! Component: 200  -  total flux cleaned = 0.00531342 Jy
! Total flux subtracted in 200 components = 0.00531342 Jy
! Clean residual min=-0.001667 max=0.001707 Jy/beam
! Clean residual mean=0.000000 rms=0.000445 Jy/beam
! Combined flux in latest and established models = 0.148627 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000105681 Jy
! Component: 100  -  total flux cleaned = 0.000181839 Jy
! Component: 150  -  total flux cleaned = 0.000246912 Jy
! Component: 200  -  total flux cleaned = 0.00030235 Jy
! Total flux subtracted in 200 components = 0.00030235 Jy
! Clean residual min=-0.001609 max=0.001721 Jy/beam
! Clean residual mean=0.000001 rms=0.000441 Jy/beam
! Combined flux in latest and established models = 0.14893 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 99 components and 0.14893 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8681 mas, bmaj=2.065 mas, bpa=-8.64 degrees
! Estimated noise=0.258951 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.36136e-05 Jy
! Component: 100  -  total flux cleaned = 6.83844e-06 Jy
! Component: 150  -  total flux cleaned = 2.93427e-05 Jy
! Component: 200  -  total flux cleaned = 4.99276e-05 Jy
! Total flux subtracted in 200 components = 4.99276e-05 Jy
! Clean residual min=-0.001644 max=0.001557 Jy/beam
! Clean residual mean=0.000000 rms=0.000346 Jy/beam
! Combined flux in latest and established models = 0.14898 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 106 components and 0.14898 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062703Jy  sigma=1.355857
! Fit after  self-cal, rms=0.062696Jy  sigma=1.355454
wmodel /J1644+1813_X_map.mod
! wmodel: Unable to open new model file: /J1644+1813_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1644+1813_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8681 x 2.065 at -8.64 degrees (North through East)
! Clean map  min=-0.001452  max=0.090978 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1644+1813_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0909778 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000343015 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.13109 1.13109 2.26219 4.52437 9.04874 18.0975 36.195 72.3899
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.09 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  265.23 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1644+1813_X_dfm.log closed on Thu May 19 22:33:45 2016