! Started logfile: /scr/pima/bg219h_uvs/J1644+1813_S_uvs.log on Thu Apr  7 09:07:22 2016
obs /scr/pima/bg219h_uvs/J1644+1813_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1644+1813_S_uva.fits
! AN table 1: 36 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.797068 visibilities/baseline/integration-bin.
! Found source: J1644+1813
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 4132 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219h_uvs/J1644+1813_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.020804Jy  sigma=25.527162
! Fit after  self-cal, rms=0.819943Jy  sigma=20.503295
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.703 mas, bmaj=6.308 mas, bpa=-5.089 degrees
! Estimated noise=0.663865 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.136657 Jy
! Component: 100  -  total flux cleaned = 0.176978 Jy
! Total flux subtracted in 100 components = 0.176978 Jy
! Clean residual min=-0.007825 max=0.016211 Jy/beam
! Clean residual mean=-0.000005 rms=0.002498 Jy/beam
! Combined flux in latest and established models = 0.176979 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.176979 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067764Jy  sigma=1.664268
! Fit after  self-cal, rms=0.067702Jy  sigma=1.662659
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0169392 Jy
! Component: 100  -  total flux cleaned = 0.0243582 Jy
! Total flux subtracted in 100 components = 0.0243582 Jy
! Clean residual min=-0.007351 max=0.011135 Jy/beam
! Clean residual mean=-0.000001 rms=0.002238 Jy/beam
! Combined flux in latest and established models = 0.201337 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 19 components and 0.201337 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062765Jy  sigma=1.565945
! Fit after  self-cal, rms=0.062726Jy  sigma=1.564995
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.05 mas, bmaj=6.95 mas, bpa=-8.159 degrees
! Estimated noise=0.49714 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00563798 Jy
! Component: 100  -  total flux cleaned = 0.00846167 Jy
! Component: 150  -  total flux cleaned = 0.010022 Jy
! Component: 200  -  total flux cleaned = 0.0107746 Jy
! Total flux subtracted in 200 components = 0.0107746 Jy
! Clean residual min=-0.007627 max=0.009489 Jy/beam
! Clean residual mean=0.000014 rms=0.002320 Jy/beam
! Combined flux in latest and established models = 0.212111 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 40 components and 0.212111 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062023Jy  sigma=1.561306
! Fit after  self-cal, rms=0.062016Jy  sigma=1.561215
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.05 x 6.95 at -8.159 degrees (North through East)
! Clean map  min=-0.0074619  max=0.17932 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     HN        1.03     KP        0.97     LA        0.92     
!   MK        0.98     NL        1.17     OV        1.00     PT        0.95     
!   SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     HN        1.03     KP        0.96     LA        0.97     
!   MK        0.96     NL        0.92     OV        0.99     PT        0.97     
!   SC        1.04     
! 
! 
! Fit before self-cal, rms=0.062016Jy  sigma=1.561215
! Fit after  self-cal, rms=0.061287Jy  sigma=1.539642
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.057 mas, bmaj=6.998 mas, bpa=-8.399 degrees
! Estimated noise=0.492229 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00227281 Jy
! Component: 100  -  total flux cleaned = -0.00339224 Jy
! Component: 150  -  total flux cleaned = -0.00392886 Jy
! Component: 200  -  total flux cleaned = -0.00411546 Jy
! Total flux subtracted in 200 components = -0.00411546 Jy
! Clean residual min=-0.006756 max=0.008833 Jy/beam
! Clean residual mean=0.000011 rms=0.002047 Jy/beam
! Combined flux in latest and established models = 0.207996 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 48 components and 0.207996 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061291Jy  sigma=1.534220
! Fit after  self-cal, rms=0.061295Jy  sigma=1.534099
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061295Jy  sigma=1.534099
! Fit after  self-cal, rms=0.059564Jy  sigma=1.503552
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.065 mas, bmaj=6.998 mas, bpa=-8.305 degrees
! Estimated noise=0.483189 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00317596 Jy
! Component: 100  -  total flux cleaned = -0.00468853 Jy
! Component: 150  -  total flux cleaned = -0.00562439 Jy
! Component: 200  -  total flux cleaned = -0.00618649 Jy
! Total flux subtracted in 200 components = -0.00618649 Jy
! Clean residual min=-0.006018 max=0.008068 Jy/beam
! Clean residual mean=0.000005 rms=0.001690 Jy/beam
! Combined flux in latest and established models = 0.201809 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 55 components and 0.201809 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059527Jy  sigma=1.494566
! Fit after  self-cal, rms=0.059531Jy  sigma=1.494449
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-81.5, -106).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00700559 Jy
! Component: 100  -  total flux cleaned = 0.00925458 Jy
! Component: 150  -  total flux cleaned = 0.0107425 Jy
! Component: 200  -  total flux cleaned = 0.0113364 Jy
! Total flux subtracted in 200 components = 0.0113364 Jy
! Clean residual min=-0.005371 max=0.006576 Jy/beam
! Clean residual mean=0.000005 rms=0.001490 Jy/beam
! Combined flux in latest and established models = 0.213146 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 92 components and 0.213146 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058877Jy  sigma=1.462931
! Fit after  self-cal, rms=0.058784Jy  sigma=1.460212
! Inverting map 
! Added new window around map position (-29, 13.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00408276 Jy
! Component: 100  -  total flux cleaned = 0.00504468 Jy
! Component: 150  -  total flux cleaned = 0.00579413 Jy
! Component: 200  -  total flux cleaned = 0.00616338 Jy
! Total flux subtracted in 200 components = 0.00616338 Jy
! Clean residual min=-0.005366 max=0.004903 Jy/beam
! Clean residual mean=0.000002 rms=0.001296 Jy/beam
! Combined flux in latest and established models = 0.219309 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 121 components and 0.219309 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058367Jy  sigma=1.434358
! Fit after  self-cal, rms=0.058309Jy  sigma=1.432464
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058309Jy  sigma=1.432464
! Fit after  self-cal, rms=0.057652Jy  sigma=1.428205
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.06 mas, bmaj=6.996 mas, bpa=-8.37 degrees
! Estimated noise=0.479957 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000987789 Jy
! Component: 100  -  total flux cleaned = 0.00140583 Jy
! Component: 150  -  total flux cleaned = 0.00149319 Jy
! Component: 200  -  total flux cleaned = 0.00157599 Jy
! Total flux subtracted in 200 components = 0.00157599 Jy
! Clean residual min=-0.005247 max=0.004469 Jy/beam
! Clean residual mean=0.000003 rms=0.001228 Jy/beam
! Combined flux in latest and established models = 0.220885 Jy
selfcal
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 137 components and 0.220885 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057456Jy  sigma=1.413865
! Fit after  self-cal, rms=0.057438Jy  sigma=1.413254
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000487579 Jy
! Component: 100  -  total flux cleaned = 0.000335218 Jy
! Component: 150  -  total flux cleaned = 0.000265676 Jy
! Component: 200  -  total flux cleaned = 0.000267297 Jy
! Total flux subtracted in 200 components = 0.000267297 Jy
! Clean residual min=-0.005125 max=0.004215 Jy/beam
! Clean residual mean=0.000003 rms=0.001166 Jy/beam
! Combined flux in latest and established models = 0.221152 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 154 components and 0.221152 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057337Jy  sigma=1.406266
! Fit after  self-cal, rms=0.057333Jy  sigma=1.406075
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057333Jy  sigma=1.406075
! Fit after  self-cal, rms=0.057008Jy  sigma=1.404858
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.777 mas, bmaj=10.77 mas, bpa=-8.74 degrees
! Estimated noise=0.623459 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000565998 Jy
! Component: 100  -  total flux cleaned = 0.00089558 Jy
! Component: 150  -  total flux cleaned = 0.000986396 Jy
! Component: 200  -  total flux cleaned = 0.000982774 Jy
! Total flux subtracted in 200 components = 0.000982774 Jy
! Clean residual min=-0.005656 max=0.005511 Jy/beam
! Clean residual mean=0.000010 rms=0.001553 Jy/beam
! Combined flux in latest and established models = 0.222135 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 175 components and 0.222135 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057017Jy  sigma=1.398535
! Fit after  self-cal, rms=0.056993Jy  sigma=1.397769
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000360861 Jy
! Component: 100  -  total flux cleaned = 0.000358936 Jy
! Component: 150  -  total flux cleaned = 0.000356939 Jy
! Component: 200  -  total flux cleaned = 0.000418954 Jy
! Total flux subtracted in 200 components = 0.000418954 Jy
! Clean residual min=-0.005429 max=0.005117 Jy/beam
! Clean residual mean=0.000009 rms=0.001473 Jy/beam
! Combined flux in latest and established models = 0.222554 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 191 components and 0.222554 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057032Jy  sigma=1.396192
! Fit after  self-cal, rms=0.057028Jy  sigma=1.396038
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.058 mas, bmaj=6.99 mas, bpa=-8.323 degrees
! Estimated noise=0.47777 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.058 x 6.99 at -8.323 degrees (North through East)
! Clean map  min=-0.0045279  max=0.16998 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.702 mas, bmaj=6.323 mas, bpa=-5.199 degrees
! Estimated noise=0.640256 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.131565 Jy
! Component: 100  -  total flux cleaned = 0.170276 Jy
! Component: 150  -  total flux cleaned = 0.187909 Jy
! Component: 200  -  total flux cleaned = 0.198531 Jy
! Total flux subtracted in 200 components = 0.198531 Jy
! Clean residual min=-0.006332 max=0.007820 Jy/beam
! Clean residual mean=-0.000003 rms=0.001670 Jy/beam
! Combined flux in latest and established models = 0.198531 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 30 model components to the UV plane model.
! The established model now contains 30 components and 0.198531 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.058 mas, bmaj=6.99 mas, bpa=-8.323 degrees
! Estimated noise=0.47777 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00924883 Jy
! Component: 100  -  total flux cleaned = 0.0135904 Jy
! Component: 150  -  total flux cleaned = 0.0174033 Jy
! Component: 200  -  total flux cleaned = 0.0192371 Jy
! Total flux subtracted in 200 components = 0.0192371 Jy
! Clean residual min=-0.005980 max=0.005493 Jy/beam
! Clean residual mean=0.000006 rms=0.001308 Jy/beam
! Combined flux in latest and established models = 0.217768 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 65 components and 0.217768 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.777 mas, bmaj=10.77 mas, bpa=-8.74 degrees
! Estimated noise=0.623459 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00360164 Jy
! Component: 100  -  total flux cleaned = 0.00525542 Jy
! Component: 150  -  total flux cleaned = 0.00576096 Jy
! Component: 200  -  total flux cleaned = 0.00576485 Jy
! Total flux subtracted in 200 components = 0.00576485 Jy
! Clean residual min=-0.005881 max=0.005469 Jy/beam
! Clean residual mean=0.000010 rms=0.001552 Jy/beam
! Combined flux in latest and established models = 0.223533 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.36374e-05 Jy
! Component: 100  -  total flux cleaned = 0.000159401 Jy
! Component: 150  -  total flux cleaned = 0.000161214 Jy
! Component: 200  -  total flux cleaned = 9.88498e-05 Jy
! Total flux subtracted in 200 components = 9.88498e-05 Jy
! Clean residual min=-0.005567 max=0.005166 Jy/beam
! Clean residual mean=0.000010 rms=0.001469 Jy/beam
! Combined flux in latest and established models = 0.223632 Jy
! Adding 65 model components to the UV plane model.
! The established model now contains 123 components and 0.223632 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.058 mas, bmaj=6.99 mas, bpa=-8.323 degrees
! Estimated noise=0.47777 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000569659 Jy
! Component: 100  -  total flux cleaned = -0.000472493 Jy
! Component: 150  -  total flux cleaned = -0.00046714 Jy
! Component: 200  -  total flux cleaned = -0.000463739 Jy
! Total flux subtracted in 200 components = -0.000463739 Jy
! Clean residual min=-0.004737 max=0.004408 Jy/beam
! Clean residual mean=0.000003 rms=0.001098 Jy/beam
! Combined flux in latest and established models = 0.223168 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 144 components and 0.223168 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057131Jy  sigma=1.396810
! Fit after  self-cal, rms=0.057112Jy  sigma=1.396177
wmodel /scr/pima/bg219h_uvs/J1644+1813_S_map.mod
! Writing 144 model components to file: /scr/pima/bg219h_uvs/J1644+1813_S_map.mod
wobs /scr/pima/bg219h_uvs/J1644+1813_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219h_uvs/J1644+1813_S_uvs.fits
wwins /scr/pima/bg219h_uvs/J1644+1813_S_map.win
! wwins: Wrote 3 windows to /scr/pima/bg219h_uvs/J1644+1813_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000187251 Jy
! Component: 100  -  total flux cleaned = -0.000259196 Jy
! Component: 150  -  total flux cleaned = -0.000325614 Jy
! Component: 200  -  total flux cleaned = -0.000391157 Jy
! Component: 250  -  total flux cleaned = -0.000327246 Jy
! Component: 300  -  total flux cleaned = -0.00026608 Jy
! Component: 350  -  total flux cleaned = -0.000147669 Jy
! Component: 400  -  total flux cleaned = -0.00020548 Jy
! Component: 450  -  total flux cleaned = -0.00026127 Jy
! Component: 500  -  total flux cleaned = -0.000315951 Jy
! Component: 550  -  total flux cleaned = -0.000159748 Jy
! Component: 600  -  total flux cleaned = -5.89285e-05 Jy
! Component: 650  -  total flux cleaned = 0.000287544 Jy
! Component: 700  -  total flux cleaned = 0.000382612 Jy
! Component: 750  -  total flux cleaned = 0.000476045 Jy
! Component: 800  -  total flux cleaned = 0.000474691 Jy
! Component: 850  -  total flux cleaned = 0.000564616 Jy
! Component: 900  -  total flux cleaned = 0.000476319 Jy
! Component: 950  -  total flux cleaned = 0.000433851 Jy
! Component: 1000  -  total flux cleaned = 0.000517186 Jy
! Component: 1050  -  total flux cleaned = 0.000515678 Jy
! Component: 1100  -  total flux cleaned = 0.000555359 Jy
! Component: 1150  -  total flux cleaned = 0.000515645 Jy
! Component: 1200  -  total flux cleaned = 0.000592514 Jy
! Component: 1250  -  total flux cleaned = 0.000514979 Jy
! Component: 1300  -  total flux cleaned = 0.000440395 Jy
! Component: 1350  -  total flux cleaned = 0.000476713 Jy
! Component: 1400  -  total flux cleaned = 0.000332102 Jy
! Component: 1450  -  total flux cleaned = 0.000296388 Jy
! Component: 1500  -  total flux cleaned = 0.000120522 Jy
! Component: 1550  -  total flux cleaned = 0.000120697 Jy
! Component: 1600  -  total flux cleaned = 5.22537e-05 Jy
! Component: 1650  -  total flux cleaned = -1.54608e-05 Jy
! Component: 1700  -  total flux cleaned = -0.000114003 Jy
! Component: 1750  -  total flux cleaned = -0.000178682 Jy
! Component: 1800  -  total flux cleaned = -0.000114174 Jy
! Component: 1850  -  total flux cleaned = -0.00011494 Jy
! Component: 1900  -  total flux cleaned = -0.000114858 Jy
! Component: 1950  -  total flux cleaned = -8.46361e-05 Jy
! Component: 2000  -  total flux cleaned = -0.000175047 Jy
! Component: 2050  -  total flux cleaned = -0.000204102 Jy
! Component: 2100  -  total flux cleaned = -8.67207e-05 Jy
! Component: 2150  -  total flux cleaned = -0.000115894 Jy
! Component: 2200  -  total flux cleaned = -8.72987e-05 Jy
! Component: 2250  -  total flux cleaned = -0.000143343 Jy
! Component: 2300  -  total flux cleaned = -8.83383e-05 Jy
! Component: 2350  -  total flux cleaned = -0.000170447 Jy
! Component: 2400  -  total flux cleaned = -6.28419e-05 Jy
! Component: 2450  -  total flux cleaned = -8.9712e-05 Jy
! Component: 2500  -  total flux cleaned = -6.35829e-05 Jy
! Component: 2550  -  total flux cleaned = -0.000115496 Jy
! Component: 2600  -  total flux cleaned = -8.95954e-05 Jy
! Component: 2650  -  total flux cleaned = -0.000140345 Jy
! Component: 2700  -  total flux cleaned = -0.00026509 Jy
! Component: 2750  -  total flux cleaned = -0.000190488 Jy
! Component: 2800  -  total flux cleaned = -0.000312158 Jy
! Component: 2850  -  total flux cleaned = -0.000215217 Jy
! Component: 2900  -  total flux cleaned = -0.000287222 Jy
! Component: 2950  -  total flux cleaned = -0.000334225 Jy
! Component: 3000  -  total flux cleaned = -0.000380986 Jy
! Component: 3050  -  total flux cleaned = -0.000496822 Jy
! Component: 3100  -  total flux cleaned = -0.00042835 Jy
! Component: 3150  -  total flux cleaned = -0.000519356 Jy
! Component: 3200  -  total flux cleaned = -0.000519805 Jy
! Component: 3250  -  total flux cleaned = -0.000652932 Jy
! Component: 3300  -  total flux cleaned = -0.000740305 Jy
! Component: 3350  -  total flux cleaned = -0.000762199 Jy
! Component: 3400  -  total flux cleaned = -0.000783453 Jy
! Component: 3450  -  total flux cleaned = -0.000804869 Jy
! Component: 3500  -  total flux cleaned = -0.000720705 Jy
! Component: 3550  -  total flux cleaned = -0.000846345 Jy
! Component: 3600  -  total flux cleaned = -0.000867028 Jy
! Component: 3650  -  total flux cleaned = -0.000846529 Jy
! Component: 3700  -  total flux cleaned = -0.000887524 Jy
! Component: 3750  -  total flux cleaned = -0.000887296 Jy
! Component: 3800  -  total flux cleaned = -0.000927253 Jy
! Component: 3850  -  total flux cleaned = -0.000907354 Jy
! Component: 3900  -  total flux cleaned = -0.00086799 Jy
! Component: 3950  -  total flux cleaned = -0.000926468 Jy
! Component: 4000  -  total flux cleaned = -0.000945516 Jy
! Component: 4050  -  total flux cleaned = -0.000964757 Jy
! Total flux subtracted in 4096 components = -0.000983771 Jy
! Clean residual min=-0.001004 max=0.001154 Jy/beam
! Clean residual mean=0.000001 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.222184 Jy
keep
! Adding 317 model components to the UV plane model.
! The established model now contains 460 components and 0.222184 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219h_uvs/J1644+1813_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.058 x 6.99 at -8.323 degrees (North through East)
! Clean map  min=-0.0037073  max=0.16827 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1644+1813_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.168273 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000340137 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.606401 0.606401 1.2128 2.42561 4.85121 9.70242 19.4048 38.8097 77.6194
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.168 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  494.721 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1644+1813_S_uvs.log closed on Thu Apr  7 09:07:27 2016