! Started logfile: /scr/pima/bg219h_uvs/J1642+2523_X_uvs.log on Thu Apr  7 12:15:08 2016
obs /scr/pima/bg219h_uvs/J1642+2523_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1642+2523_X_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.827778 visibilities/baseline/integration-bin.
! Found source: J1642+2523
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 12516 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219h_uvs/J1642+2523_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.065214Jy  sigma=24.143299
! Fit after  self-cal, rms=0.647153Jy  sigma=14.364830
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.772 mas, bmaj=1.606 mas, bpa=-0.008527 degrees
! Estimated noise=0.641169 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.266413 Jy
! Component: 100  -  total flux cleaned = 0.348576 Jy
! Total flux subtracted in 100 components = 0.348576 Jy
! Clean residual min=-0.014716 max=0.037597 Jy/beam
! Clean residual mean=-0.000003 rms=0.004552 Jy/beam
! Combined flux in latest and established models = 0.348576 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.348576 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.111961Jy  sigma=2.475733
! Fit after  self-cal, rms=0.111843Jy  sigma=2.471552
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0426188 Jy
! Component: 100  -  total flux cleaned = 0.065321 Jy
! Total flux subtracted in 100 components = 0.065321 Jy
! Clean residual min=-0.010051 max=0.019262 Jy/beam
! Clean residual mean=-0.000013 rms=0.002620 Jy/beam
! Combined flux in latest and established models = 0.413897 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 10 components and 0.413897 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.090990Jy  sigma=1.904573
! Fit after  self-cal, rms=0.090933Jy  sigma=1.902214
! Inverting map 
! Added new window around map position (-1.4, -0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0181065 Jy
! Component: 100  -  total flux cleaned = 0.0289313 Jy
! Total flux subtracted in 100 components = 0.0289313 Jy
! Clean residual min=-0.008066 max=0.012664 Jy/beam
! Clean residual mean=-0.000017 rms=0.002114 Jy/beam
! Combined flux in latest and established models = 0.442828 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 24 components and 0.442828 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.086568Jy  sigma=1.795328
! Fit after  self-cal, rms=0.086398Jy  sigma=1.790234
! Inverting map 
! Added new window around map position (7, -10).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0114637 Jy
! Component: 100  -  total flux cleaned = 0.0167018 Jy
! Total flux subtracted in 100 components = 0.0167018 Jy
! Clean residual min=-0.006980 max=0.011157 Jy/beam
! Clean residual mean=-0.000018 rms=0.001864 Jy/beam
! Combined flux in latest and established models = 0.45953 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 33 components and 0.45953 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.084735Jy  sigma=1.758440
! Fit after  self-cal, rms=0.084615Jy  sigma=1.754757
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9349 mas, bmaj=1.935 mas, bpa=-1.591 degrees
! Estimated noise=0.41919 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00586997 Jy
! Component: 100  -  total flux cleaned = 0.00764539 Jy
! Component: 150  -  total flux cleaned = 0.00907284 Jy
! Component: 200  -  total flux cleaned = 0.0103999 Jy
! Total flux subtracted in 200 components = 0.0103999 Jy
! Clean residual min=-0.006494 max=0.008018 Jy/beam
! Clean residual mean=-0.000027 rms=0.001624 Jy/beam
! Combined flux in latest and established models = 0.46993 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 49 components and 0.46993 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.083565Jy  sigma=1.731246
! Fit after  self-cal, rms=0.083543Jy  sigma=1.730432
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9349 x 1.935 at -1.591 degrees (North through East)
! Clean map  min=-0.0063747  max=0.36007 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.17     KP        0.98     
!   LA        0.99     MK        0.97     NL        0.96     OV        0.99     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.14     KP        0.98     
!   LA        1.00     MK        1.00     NL        0.97     OV        0.99     
!   PT        0.96     SC        0.97     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.19     KP        0.97     
!   LA        1.02     MK        1.00     NL        0.97     OV        0.99     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.13     KP        0.98     
!   LA        1.00     MK        0.99     NL        0.97     OV        1.00     
!   PT        0.97     SC        1.00     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.083543Jy  sigma=1.730432
! Fit after  self-cal, rms=0.084599Jy  sigma=1.705046
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.938 mas, bmaj=1.938 mas, bpa=-1.267 degrees
! Estimated noise=0.418399 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00078431 Jy
! Component: 100  -  total flux cleaned = -0.00117665 Jy
! Component: 150  -  total flux cleaned = -0.00145058 Jy
! Component: 200  -  total flux cleaned = -0.00163856 Jy
! Total flux subtracted in 200 components = -0.00163856 Jy
! Clean residual min=-0.005388 max=0.005682 Jy/beam
! Clean residual mean=-0.000021 rms=0.001198 Jy/beam
! Combined flux in latest and established models = 0.468291 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 64 components and 0.468291 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.084454Jy  sigma=1.702481
! Fit after  self-cal, rms=0.084488Jy  sigma=1.702268
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.084488Jy  sigma=1.702268
! Fit after  self-cal, rms=0.084541Jy  sigma=1.697532
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9374 mas, bmaj=1.939 mas, bpa=-1.438 degrees
! Estimated noise=0.418361 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00113709 Jy
! Component: 100  -  total flux cleaned = -0.00129372 Jy
! Component: 150  -  total flux cleaned = -0.0013418 Jy
! Component: 200  -  total flux cleaned = -0.00143554 Jy
! Total flux subtracted in 200 components = -0.00143554 Jy
! Clean residual min=-0.004585 max=0.004836 Jy/beam
! Clean residual mean=-0.000020 rms=0.001140 Jy/beam
! Combined flux in latest and established models = 0.466856 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 78 components and 0.466856 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.084457Jy  sigma=1.696207
! Fit after  self-cal, rms=0.084461Jy  sigma=1.696047
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.6, 5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00406515 Jy
! Component: 100  -  total flux cleaned = 0.00446095 Jy
! Component: 150  -  total flux cleaned = 0.0044646 Jy
! Component: 200  -  total flux cleaned = 0.00432238 Jy
! Total flux subtracted in 200 components = 0.00432238 Jy
! Clean residual min=-0.004389 max=0.004413 Jy/beam
! Clean residual mean=-0.000015 rms=0.001060 Jy/beam
! Combined flux in latest and established models = 0.471178 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 99 components and 0.471178 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.084191Jy  sigma=1.690351
! Fit after  self-cal, rms=0.084189Jy  sigma=1.689885
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.084189Jy  sigma=1.689885
! Fit after  self-cal, rms=0.084065Jy  sigma=1.684348
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9375 mas, bmaj=1.941 mas, bpa=-1.405 degrees
! Estimated noise=0.41833 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000483579 Jy
! Component: 100  -  total flux cleaned = 0.00041743 Jy
! Component: 150  -  total flux cleaned = 0.000473415 Jy
! Component: 200  -  total flux cleaned = 0.000471263 Jy
! Total flux subtracted in 200 components = 0.000471263 Jy
! Clean residual min=-0.004210 max=0.004097 Jy/beam
! Clean residual mean=-0.000012 rms=0.000995 Jy/beam
! Combined flux in latest and established models = 0.47165 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 109 components and 0.47165 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.083969Jy  sigma=1.682763
! Fit after  self-cal, rms=0.083976Jy  sigma=1.682654
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000188398 Jy
! Component: 100  -  total flux cleaned = 0.000235658 Jy
! Component: 150  -  total flux cleaned = 0.000326928 Jy
! Component: 200  -  total flux cleaned = 0.000327927 Jy
! Total flux subtracted in 200 components = 0.000327927 Jy
! Clean residual min=-0.004155 max=0.004022 Jy/beam
! Clean residual mean=-0.000011 rms=0.000984 Jy/beam
! Combined flux in latest and established models = 0.471978 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 118 components and 0.471978 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.083919Jy  sigma=1.681751
! Fit after  self-cal, rms=0.083923Jy  sigma=1.681708
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.083923Jy  sigma=1.681708
! Fit after  self-cal, rms=0.083881Jy  sigma=1.681554
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.052 mas, bmaj=2.866 mas, bpa=-2.024 degrees
! Estimated noise=0.52848 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000446098 Jy
! Component: 100  -  total flux cleaned = 0.000526071 Jy
! Component: 150  -  total flux cleaned = 0.000631338 Jy
! Component: 200  -  total flux cleaned = 0.000759877 Jy
! Total flux subtracted in 200 components = 0.000759877 Jy
! Clean residual min=-0.005539 max=0.005426 Jy/beam
! Clean residual mean=-0.000022 rms=0.001466 Jy/beam
! Combined flux in latest and established models = 0.472737 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 133 components and 0.472737 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.083868Jy  sigma=1.681323
! Fit after  self-cal, rms=0.083870Jy  sigma=1.681293
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000141262 Jy
! Component: 100  -  total flux cleaned = 0.000199667 Jy
! Component: 150  -  total flux cleaned = 0.000309589 Jy
! Component: 200  -  total flux cleaned = 0.000335874 Jy
! Total flux subtracted in 200 components = 0.000335874 Jy
! Clean residual min=-0.005584 max=0.005445 Jy/beam
! Clean residual mean=-0.000021 rms=0.001456 Jy/beam
! Combined flux in latest and established models = 0.473073 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 143 components and 0.473073 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.083858Jy  sigma=1.681223
! Fit after  self-cal, rms=0.083861Jy  sigma=1.681208
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9379 mas, bmaj=1.942 mas, bpa=-1.356 degrees
! Estimated noise=0.418572 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9379 x 1.942 at -1.356 degrees (North through East)
! Clean map  min=-0.0066823  max=0.35919 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7726 mas, bmaj=1.613 mas, bpa=0.2095 degrees
! Estimated noise=0.643131 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.266945 Jy
! Component: 100  -  total flux cleaned = 0.350609 Jy
! Component: 150  -  total flux cleaned = 0.393173 Jy
! Component: 200  -  total flux cleaned = 0.417969 Jy
! Total flux subtracted in 200 components = 0.417969 Jy
! Clean residual min=-0.007951 max=0.012880 Jy/beam
! Clean residual mean=-0.000009 rms=0.002122 Jy/beam
! Combined flux in latest and established models = 0.417969 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.417969 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9379 mas, bmaj=1.942 mas, bpa=-1.356 degrees
! Estimated noise=0.418572 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0195063 Jy
! Component: 100  -  total flux cleaned = 0.0303685 Jy
! Component: 150  -  total flux cleaned = 0.0378455 Jy
! Component: 200  -  total flux cleaned = 0.0413156 Jy
! Total flux subtracted in 200 components = 0.0413156 Jy
! Clean residual min=-0.004859 max=0.005612 Jy/beam
! Clean residual mean=-0.000017 rms=0.001209 Jy/beam
! Combined flux in latest and established models = 0.459285 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 35 components and 0.459285 Jy
! Inverting map 
! Added new window around map position (-11.4, 22.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00487401 Jy
! Component: 100  -  total flux cleaned = 0.00783399 Jy
! Component: 150  -  total flux cleaned = 0.0104121 Jy
! Component: 200  -  total flux cleaned = 0.0128019 Jy
! Total flux subtracted in 200 components = 0.0128019 Jy
! Clean residual min=-0.004510 max=0.004436 Jy/beam
! Clean residual mean=-0.000014 rms=0.001029 Jy/beam
! Combined flux in latest and established models = 0.472087 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 52 components and 0.472087 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.052 mas, bmaj=2.866 mas, bpa=-2.024 degrees
! Estimated noise=0.52848 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00197579 Jy
! Component: 100  -  total flux cleaned = 0.00379054 Jy
! Component: 150  -  total flux cleaned = 0.00521798 Jy
! Component: 200  -  total flux cleaned = 0.00625747 Jy
! Total flux subtracted in 200 components = 0.00625747 Jy
! Clean residual min=-0.004980 max=0.004882 Jy/beam
! Clean residual mean=-0.000024 rms=0.001369 Jy/beam
! Combined flux in latest and established models = 0.478344 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000629244 Jy
! Component: 100  -  total flux cleaned = 0.00100913 Jy
! Component: 150  -  total flux cleaned = 0.00141909 Jy
! Component: 200  -  total flux cleaned = 0.00174403 Jy
! Total flux subtracted in 200 components = 0.00174403 Jy
! Clean residual min=-0.004893 max=0.004738 Jy/beam
! Clean residual mean=-0.000020 rms=0.001330 Jy/beam
! Combined flux in latest and established models = 0.480088 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 85 components and 0.480088 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9379 mas, bmaj=1.942 mas, bpa=-1.356 degrees
! Estimated noise=0.418572 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000187553 Jy
! Component: 100  -  total flux cleaned = 0.000365582 Jy
! Component: 150  -  total flux cleaned = 0.00053126 Jy
! Component: 200  -  total flux cleaned = 0.000684923 Jy
! Total flux subtracted in 200 components = 0.000684923 Jy
! Clean residual min=-0.004334 max=0.004264 Jy/beam
! Clean residual mean=-0.000009 rms=0.000927 Jy/beam
! Combined flux in latest and established models = 0.480773 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 103 components and 0.480773 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.083799Jy  sigma=1.679641
! Fit after  self-cal, rms=0.083760Jy  sigma=1.678907
wmodel /scr/pima/bg219h_uvs/J1642+2523_X_map.mod
! Writing 103 model components to file: /scr/pima/bg219h_uvs/J1642+2523_X_map.mod
wobs /scr/pima/bg219h_uvs/J1642+2523_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219h_uvs/J1642+2523_X_uvs.fits
wwins /scr/pima/bg219h_uvs/J1642+2523_X_map.win
! wwins: Wrote 5 windows to /scr/pima/bg219h_uvs/J1642+2523_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000366186 Jy
! Component: 100  -  total flux cleaned = 0.00110375 Jy
! Component: 150  -  total flux cleaned = 0.00141605 Jy
! Component: 200  -  total flux cleaned = 0.00159373 Jy
! Component: 250  -  total flux cleaned = 0.00165002 Jy
! Component: 300  -  total flux cleaned = 0.0014866 Jy
! Component: 350  -  total flux cleaned = 0.0013293 Jy
! Component: 400  -  total flux cleaned = 0.000972822 Jy
! Component: 450  -  total flux cleaned = 0.000924409 Jy
! Component: 500  -  total flux cleaned = 0.000778568 Jy
! Component: 550  -  total flux cleaned = 0.000684898 Jy
! Component: 600  -  total flux cleaned = 0.00059423 Jy
! Component: 650  -  total flux cleaned = 0.000504948 Jy
! Component: 700  -  total flux cleaned = 0.000329751 Jy
! Component: 750  -  total flux cleaned = 0.000329212 Jy
! Component: 800  -  total flux cleaned = 0.000287018 Jy
! Component: 850  -  total flux cleaned = 0.000369399 Jy
! Component: 900  -  total flux cleaned = 0.000369544 Jy
! Component: 950  -  total flux cleaned = 0.000567745 Jy
! Component: 1000  -  total flux cleaned = 0.000528542 Jy
! Component: 1050  -  total flux cleaned = 0.000565682 Jy
! Component: 1100  -  total flux cleaned = 0.0006034 Jy
! Component: 1150  -  total flux cleaned = 0.000714773 Jy
! Component: 1200  -  total flux cleaned = 0.000824464 Jy
! Component: 1250  -  total flux cleaned = 0.00103793 Jy
! Component: 1300  -  total flux cleaned = 0.00100215 Jy
! Component: 1350  -  total flux cleaned = 0.00113973 Jy
! Component: 1400  -  total flux cleaned = 0.00114015 Jy
! Component: 1450  -  total flux cleaned = 0.00120778 Jy
! Component: 1500  -  total flux cleaned = 0.00130637 Jy
! Component: 1550  -  total flux cleaned = 0.00143612 Jy
! Component: 1600  -  total flux cleaned = 0.00150021 Jy
! Component: 1650  -  total flux cleaned = 0.00150127 Jy
! Component: 1700  -  total flux cleaned = 0.00165786 Jy
! Component: 1750  -  total flux cleaned = 0.00175032 Jy
! Component: 1800  -  total flux cleaned = 0.00187232 Jy
! Component: 1850  -  total flux cleaned = 0.0019317 Jy
! Component: 1900  -  total flux cleaned = 0.00196173 Jy
! Component: 1950  -  total flux cleaned = 0.00207937 Jy
! Component: 2000  -  total flux cleaned = 0.00219567 Jy
! Component: 2050  -  total flux cleaned = 0.00228167 Jy
! Component: 2100  -  total flux cleaned = 0.00230993 Jy
! Component: 2150  -  total flux cleaned = 0.00242209 Jy
! Component: 2200  -  total flux cleaned = 0.0026432 Jy
! Component: 2250  -  total flux cleaned = 0.00275214 Jy
! Component: 2300  -  total flux cleaned = 0.00280613 Jy
! Component: 2350  -  total flux cleaned = 0.00288632 Jy
! Component: 2400  -  total flux cleaned = 0.00299242 Jy
! Component: 2450  -  total flux cleaned = 0.00304465 Jy
! Component: 2500  -  total flux cleaned = 0.00314861 Jy
! Component: 2550  -  total flux cleaned = 0.00327709 Jy
! Component: 2600  -  total flux cleaned = 0.00340393 Jy
! Component: 2650  -  total flux cleaned = 0.0035299 Jy
! Component: 2700  -  total flux cleaned = 0.0035299 Jy
! Component: 2750  -  total flux cleaned = 0.00360394 Jy
! Component: 2800  -  total flux cleaned = 0.0036043 Jy
! Component: 2850  -  total flux cleaned = 0.00370165 Jy
! Component: 2900  -  total flux cleaned = 0.00370202 Jy
! Component: 2950  -  total flux cleaned = 0.00384571 Jy
! Component: 3000  -  total flux cleaned = 0.00394074 Jy
! Component: 3050  -  total flux cleaned = 0.00398795 Jy
! Component: 3100  -  total flux cleaned = 0.00410496 Jy
! Component: 3150  -  total flux cleaned = 0.00410498 Jy
! Component: 3200  -  total flux cleaned = 0.00419698 Jy
! Component: 3250  -  total flux cleaned = 0.00424263 Jy
! Component: 3300  -  total flux cleaned = 0.00431029 Jy
! Component: 3350  -  total flux cleaned = 0.00428794 Jy
! Component: 3400  -  total flux cleaned = 0.00437703 Jy
! Component: 3450  -  total flux cleaned = 0.00446523 Jy
! Component: 3500  -  total flux cleaned = 0.00450902 Jy
! Component: 3550  -  total flux cleaned = 0.00461798 Jy
! Component: 3600  -  total flux cleaned = 0.00468289 Jy
! Component: 3650  -  total flux cleaned = 0.00470435 Jy
! Component: 3700  -  total flux cleaned = 0.00478964 Jy
! Component: 3750  -  total flux cleaned = 0.00485334 Jy
! Component: 3800  -  total flux cleaned = 0.00489546 Jy
! Component: 3850  -  total flux cleaned = 0.00487486 Jy
! Component: 3900  -  total flux cleaned = 0.00502023 Jy
! Component: 3950  -  total flux cleaned = 0.00508215 Jy
! Component: 4000  -  total flux cleaned = 0.00510273 Jy
! Component: 4050  -  total flux cleaned = 0.00520454 Jy
! Total flux subtracted in 4096 components = 0.00526512 Jy
! Clean residual min=-0.001121 max=0.001202 Jy/beam
! Clean residual mean=-0.000003 rms=0.000352 Jy/beam
! Combined flux in latest and established models = 0.486038 Jy
keep
! Adding 292 model components to the UV plane model.
! The established model now contains 395 components and 0.486038 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219h_uvs/J1642+2523_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9379 x 1.942 at -1.356 degrees (North through East)
! Clean map  min=-0.0041273  max=0.35922 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1642+2523_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.359219 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000349439 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.291832 0.291832 0.583664 1.16733 2.33465 4.66931 9.33862 18.6772 37.3545 74.7089
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.359 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1027.99 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1642+2523_X_uvs.log closed on Thu Apr  7 12:15:12 2016