! Started logfile: /scr/pima/bg219h_uvs/J1635+1831_X_dfm.log on Thu May 19 22:33:02 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J1635+1831_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1635+1831_X_uva.fits
! AN table 1: 61 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.881603 visibilities/baseline/integration-bin.
! Found source: J1635+1831
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 29040 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1635+1831_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.003007Jy  sigma=25.079298
! Fit after  self-cal, rms=0.957669Jy  sigma=23.944511
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6692 mas, bmaj=1.674 mas, bpa=-4.428 degrees
! Estimated noise=0.393869 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0329958 Jy
! Component: 100  -  total flux cleaned = 0.0407092 Jy
! Total flux subtracted in 100 components = 0.0407092 Jy
! Clean residual min=-0.003163 max=0.003809 Jy/beam
! Clean residual mean=-0.000003 rms=0.000630 Jy/beam
! Combined flux in latest and established models = 0.0407092 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.0407092 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062893Jy  sigma=1.430340
! Fit after  self-cal, rms=0.061536Jy  sigma=1.396650
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0045037 Jy
! Component: 100  -  total flux cleaned = 0.00677697 Jy
! Total flux subtracted in 100 components = 0.00677697 Jy
! Clean residual min=-0.002372 max=0.003863 Jy/beam
! Clean residual mean=-0.000002 rms=0.000589 Jy/beam
! Combined flux in latest and established models = 0.0474862 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.0474862 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061066Jy  sigma=1.382973
! Fit after  self-cal, rms=0.061044Jy  sigma=1.382300
! Inverting map 
! Added new window around map position (-1.4, -2.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00359238 Jy
! Component: 100  -  total flux cleaned = 0.00562123 Jy
! Total flux subtracted in 100 components = 0.00562123 Jy
! Clean residual min=-0.002156 max=0.002250 Jy/beam
! Clean residual mean=-0.000001 rms=0.000528 Jy/beam
! Combined flux in latest and established models = 0.0531074 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 27 components and 0.0531074 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060759Jy  sigma=1.373279
! Fit after  self-cal, rms=0.060700Jy  sigma=1.371907
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8792 mas, bmaj=1.997 mas, bpa=-4.393 degrees
! Estimated noise=0.179102 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00318593 Jy
! Component: 100  -  total flux cleaned = 0.00477612 Jy
! Component: 150  -  total flux cleaned = 0.00570496 Jy
! Component: 200  -  total flux cleaned = 0.00614224 Jy
! Total flux subtracted in 200 components = 0.00614224 Jy
! Clean residual min=-0.001307 max=0.001389 Jy/beam
! Clean residual mean=0.000001 rms=0.000291 Jy/beam
! Combined flux in latest and established models = 0.0592496 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 36 components and 0.0592496 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060546Jy  sigma=1.367401
! Fit after  self-cal, rms=0.060515Jy  sigma=1.366593
! Inverting map 
! Added new window around map position (-20.6, 30.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00144763 Jy
! Component: 100  -  total flux cleaned = 0.00158576 Jy
! Component: 150  -  total flux cleaned = 0.00164003 Jy
! Component: 200  -  total flux cleaned = 0.00170754 Jy
! Total flux subtracted in 200 components = 0.00170754 Jy
! Clean residual min=-0.001213 max=0.001152 Jy/beam
! Clean residual mean=0.000001 rms=0.000272 Jy/beam
! Combined flux in latest and established models = 0.0609572 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 53 components and 0.0609572 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060473Jy  sigma=1.365575
! Fit after  self-cal, rms=0.060459Jy  sigma=1.365408
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8792 x 1.997 at -4.393 degrees (North through East)
! Clean map  min=-0.001157  max=0.044357 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.03     KP        1.00     
!   LA        1.00     MK        1.02     NL        1.03     OV        1.00     
!   PT        1.04     SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.97     HN        0.87     KP        0.97     
!   LA        1.01     MK        1.07     NL        1.06     OV        1.01     
!   PT        1.05     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.11     KP        1.12     
!   LA        0.96     MK        1.03     NL        1.00     OV        1.06     
!   PT        1.01     SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        0.89     KP        1.07     
!   LA        1.01     MK        1.05     NL        1.03     OV        0.98     
!   PT        1.02     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.93     HN        0.89     KP        1.14     
!   LA        0.99     MK        1.01     NL        1.01     OV        1.01     
!   PT        0.93     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        0.99     HN        0.98     KP        1.01     
!   LA        1.01     MK        1.07     NL        0.98     OV        1.05     
!   PT        1.06     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.96     HN        0.88     KP        1.03     
!   LA        0.95     MK        0.95     NL        1.04     OV        1.02     
!   PT        1.06     SC        0.92     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.97     HN        0.86     KP        1.10     
!   LA        1.01     MK        1.09     NL        1.04     OV        1.02     
!   PT        0.97     SC        1.07     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.87     KP        1.03     
!   LA        1.03     MK        1.00     NL        0.93     OV        0.99     
!   PT        0.96     SC        0.96     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.04     HN        0.90     KP        1.03     
!   LA        1.02     MK        0.93     NL        1.05     OV        1.08     
!   PT        0.95     SC        0.96     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.98     HN        0.84     KP        0.96     
!   LA        0.99     MK        0.90     NL        0.94     OV        1.05     
!   PT        0.99     SC        0.92     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.84     FD        0.97     HN        0.91     KP        0.94     
!   LA        0.96     MK        0.90     NL        1.09     OV        0.96     
!   PT        1.01     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.060459Jy  sigma=1.365408
! Fit after  self-cal, rms=0.058191Jy  sigma=1.362588
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8763 mas, bmaj=1.985 mas, bpa=-4.54 degrees
! Estimated noise=0.177133 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000657297 Jy
! Component: 100  -  total flux cleaned = 0.000753796 Jy
! Component: 150  -  total flux cleaned = 0.000785313 Jy
! Component: 200  -  total flux cleaned = 0.000812445 Jy
! Total flux subtracted in 200 components = 0.000812445 Jy
! Clean residual min=-0.001019 max=0.001057 Jy/beam
! Clean residual mean=0.000002 rms=0.000247 Jy/beam
! Combined flux in latest and established models = 0.0617696 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 65 components and 0.0617696 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058176Jy  sigma=1.362288
! Fit after  self-cal, rms=0.058161Jy  sigma=1.361826
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058161Jy  sigma=1.361826
! Fit after  self-cal, rms=0.058366Jy  sigma=1.359852
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8755 mas, bmaj=1.991 mas, bpa=-4.355 degrees
! Estimated noise=0.176989 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000161057 Jy
! Component: 100  -  total flux cleaned = 0.000128329 Jy
! Component: 150  -  total flux cleaned = 8.63226e-05 Jy
! Component: 200  -  total flux cleaned = 6.16293e-05 Jy
! Total flux subtracted in 200 components = 6.16293e-05 Jy
! Clean residual min=-0.000928 max=0.000999 Jy/beam
! Clean residual mean=0.000001 rms=0.000234 Jy/beam
! Combined flux in latest and established models = 0.0618312 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 76 components and 0.0618312 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058357Jy  sigma=1.359681
! Fit after  self-cal, rms=0.058381Jy  sigma=1.359446
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (46.4, -7.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000512507 Jy
! Component: 100  -  total flux cleaned = 0.000589262 Jy
! Component: 150  -  total flux cleaned = 0.000590118 Jy
! Component: 200  -  total flux cleaned = 0.000560709 Jy
! Total flux subtracted in 200 components = 0.000560709 Jy
! Clean residual min=-0.000937 max=0.000915 Jy/beam
! Clean residual mean=0.000001 rms=0.000226 Jy/beam
! Combined flux in latest and established models = 0.062392 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 91 components and 0.062392 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058363Jy  sigma=1.359072
! Fit after  self-cal, rms=0.058363Jy  sigma=1.359007
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058363Jy  sigma=1.359007
! Fit after  self-cal, rms=0.058357Jy  sigma=1.358940
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.875 mas, bmaj=1.992 mas, bpa=-4.337 degrees
! Estimated noise=0.176892 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000278238 Jy
! Component: 100  -  total flux cleaned = 0.000277799 Jy
! Component: 150  -  total flux cleaned = 0.000278041 Jy
! Component: 200  -  total flux cleaned = 0.000265153 Jy
! Total flux subtracted in 200 components = 0.000265153 Jy
! Clean residual min=-0.000904 max=0.000904 Jy/beam
! Clean residual mean=0.000001 rms=0.000223 Jy/beam
! Combined flux in latest and established models = 0.0626571 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 95 components and 0.0626571 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058348Jy  sigma=1.358774
! Fit after  self-cal, rms=0.058353Jy  sigma=1.358745
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000105483 Jy
! Component: 100  -  total flux cleaned = 9.31607e-05 Jy
! Component: 150  -  total flux cleaned = 8.16751e-05 Jy
! Component: 200  -  total flux cleaned = 7.0783e-05 Jy
! Total flux subtracted in 200 components = 7.0783e-05 Jy
! Clean residual min=-0.000888 max=0.000896 Jy/beam
! Clean residual mean=0.000001 rms=0.000222 Jy/beam
! Combined flux in latest and established models = 0.0627279 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 96 components and 0.0627279 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058348Jy  sigma=1.358652
! Fit after  self-cal, rms=0.058348Jy  sigma=1.358633
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058348Jy  sigma=1.358633
! Fit after  self-cal, rms=0.058264Jy  sigma=1.358610
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.109 mas, bmaj=2.952 mas, bpa=-1.728 degrees
! Estimated noise=0.223781 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000119081 Jy
! Component: 100  -  total flux cleaned = 0.00013281 Jy
! Component: 150  -  total flux cleaned = 0.000133378 Jy
! Component: 200  -  total flux cleaned = 0.000123952 Jy
! Total flux subtracted in 200 components = 0.000123952 Jy
! Clean residual min=-0.000967 max=0.001123 Jy/beam
! Clean residual mean=0.000003 rms=0.000271 Jy/beam
! Combined flux in latest and established models = 0.0628518 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 114 components and 0.0628518 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058263Jy  sigma=1.358595
! Fit after  self-cal, rms=0.058263Jy  sigma=1.358579
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.80748e-05 Jy
! Component: 100  -  total flux cleaned = 3.11377e-05 Jy
! Component: 150  -  total flux cleaned = 1.6237e-05 Jy
! Component: 200  -  total flux cleaned = 9.20416e-06 Jy
! Total flux subtracted in 200 components = 9.20416e-06 Jy
! Clean residual min=-0.000973 max=0.001130 Jy/beam
! Clean residual mean=0.000003 rms=0.000270 Jy/beam
! Combined flux in latest and established models = 0.062861 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 117 components and 0.062861 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058262Jy  sigma=1.358569
! Fit after  self-cal, rms=0.058261Jy  sigma=1.358562
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8746 mas, bmaj=1.992 mas, bpa=-4.342 degrees
! Estimated noise=0.17668 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8746 x 1.992 at -4.342 degrees (North through East)
! Clean map  min=-0.00095983  max=0.0437 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6674 mas, bmaj=1.68 mas, bpa=-4.454 degrees
! Estimated noise=0.385 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0330712 Jy
! Component: 100  -  total flux cleaned = 0.0421817 Jy
! Component: 150  -  total flux cleaned = 0.0473527 Jy
! Component: 200  -  total flux cleaned = 0.0507869 Jy
! Total flux subtracted in 200 components = 0.0507869 Jy
! Clean residual min=-0.002267 max=0.002227 Jy/beam
! Clean residual mean=-0.000002 rms=0.000523 Jy/beam
! Combined flux in latest and established models = 0.0507869 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.0507869 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8746 mas, bmaj=1.992 mas, bpa=-4.342 degrees
! Estimated noise=0.17668 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.004424 Jy
! Component: 100  -  total flux cleaned = 0.0069196 Jy
! Component: 150  -  total flux cleaned = 0.00868184 Jy
! Component: 200  -  total flux cleaned = 0.00990575 Jy
! Total flux subtracted in 200 components = 0.00990575 Jy
! Clean residual min=-0.001134 max=0.001013 Jy/beam
! Clean residual mean=0.000000 rms=0.000266 Jy/beam
! Combined flux in latest and established models = 0.0606926 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 37 components and 0.0606926 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.109 mas, bmaj=2.952 mas, bpa=-1.728 degrees
! Estimated noise=0.223781 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00129889 Jy
! Component: 100  -  total flux cleaned = 0.00148705 Jy
! Component: 150  -  total flux cleaned = 0.0017288 Jy
! Component: 200  -  total flux cleaned = 0.00177957 Jy
! Total flux subtracted in 200 components = 0.00177957 Jy
! Clean residual min=-0.001064 max=0.001135 Jy/beam
! Clean residual mean=0.000002 rms=0.000294 Jy/beam
! Combined flux in latest and established models = 0.0624722 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.14843e-05 Jy
! Component: 100  -  total flux cleaned = 3.97583e-05 Jy
! Component: 150  -  total flux cleaned = 3.92158e-05 Jy
! Component: 200  -  total flux cleaned = 6.98367e-05 Jy
! Total flux subtracted in 200 components = 6.98367e-05 Jy
! Clean residual min=-0.001037 max=0.001140 Jy/beam
! Clean residual mean=0.000003 rms=0.000281 Jy/beam
! Combined flux in latest and established models = 0.062542 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 79 components and 0.062542 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8746 mas, bmaj=1.992 mas, bpa=-4.342 degrees
! Estimated noise=0.17668 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.62961e-05 Jy
! Component: 100  -  total flux cleaned = -5.98331e-05 Jy
! Component: 150  -  total flux cleaned = -3.97672e-05 Jy
! Component: 200  -  total flux cleaned = -2.07795e-05 Jy
! Total flux subtracted in 200 components = -2.07795e-05 Jy
! Clean residual min=-0.000986 max=0.000921 Jy/beam
! Clean residual mean=0.000001 rms=0.000228 Jy/beam
! Combined flux in latest and established models = 0.0625213 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 93 components and 0.0625213 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058281Jy  sigma=1.359063
! Fit after  self-cal, rms=0.058288Jy  sigma=1.358952
wmodel /J1635+1831_X_map.mod
! wmodel: Unable to open new model file: /J1635+1831_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1635+1831_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8746 x 1.992 at -4.342 degrees (North through East)
! Clean map  min=-0.00092654  max=0.043561 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1635+1831_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0435614 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000224868 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.54863 1.54863 3.09725 6.1945 12.389 24.778 49.556 99.1121
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.043 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  193.72 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1635+1831_X_dfm.log closed on Thu May 19 22:33:05 2016