! Started logfile: /scr/pima/bg219h_uvs/J1630+2131_X_dfm.log on Thu May 19 22:32:53 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J1630+2131_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1630+2131_X_uva.fits
! AN table 1: 62 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.891039 visibilities/baseline/integration-bin.
! Found source: J1630+2131
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 29832 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1630+2131_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 60 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008403Jy  sigma=24.813511
! Fit after  self-cal, rms=0.926913Jy  sigma=22.744563
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.734 mas, bmaj=1.599 mas, bpa=0.002844 degrees
! Estimated noise=0.365588 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0536963 Jy
! Component: 100  -  total flux cleaned = 0.0728286 Jy
! Total flux subtracted in 100 components = 0.0728286 Jy
! Clean residual min=-0.003981 max=0.008657 Jy/beam
! Clean residual mean=-0.000001 rms=0.001054 Jy/beam
! Combined flux in latest and established models = 0.0728286 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0728286 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070178Jy  sigma=1.499058
! Fit after  self-cal, rms=0.069403Jy  sigma=1.482496
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0106024 Jy
! Component: 100  -  total flux cleaned = 0.016304 Jy
! Total flux subtracted in 100 components = 0.016304 Jy
! Clean residual min=-0.003513 max=0.004650 Jy/beam
! Clean residual mean=-0.000002 rms=0.000784 Jy/beam
! Combined flux in latest and established models = 0.0891326 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 12 components and 0.0891326 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067326Jy  sigma=1.416281
! Fit after  self-cal, rms=0.067304Jy  sigma=1.415593
! Inverting map 
! Added new window around map position (1.4, 0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00472774 Jy
! Component: 100  -  total flux cleaned = 0.00769395 Jy
! Total flux subtracted in 100 components = 0.00769395 Jy
! Clean residual min=-0.003418 max=0.003971 Jy/beam
! Clean residual mean=-0.000002 rms=0.000703 Jy/beam
! Combined flux in latest and established models = 0.0968266 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 21 components and 0.0968266 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066869Jy  sigma=1.402938
! Fit after  self-cal, rms=0.066843Jy  sigma=1.402141
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9424 mas, bmaj=1.896 mas, bpa=-0.9347 degrees
! Estimated noise=0.182401 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4.8, 1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00544014 Jy
! Component: 100  -  total flux cleaned = 0.00875615 Jy
! Component: 150  -  total flux cleaned = 0.0111744 Jy
! Component: 200  -  total flux cleaned = 0.0129988 Jy
! Total flux subtracted in 200 components = 0.0129988 Jy
! Clean residual min=-0.001608 max=0.001989 Jy/beam
! Clean residual mean=-0.000003 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.109825 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 40 components and 0.109825 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066362Jy  sigma=1.387114
! Fit after  self-cal, rms=0.066304Jy  sigma=1.385266
! Inverting map 
! Added new window around map position (3, 1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00245785 Jy
! Component: 100  -  total flux cleaned = 0.00404979 Jy
! Component: 150  -  total flux cleaned = 0.00526925 Jy
! Component: 200  -  total flux cleaned = 0.00609482 Jy
! Total flux subtracted in 200 components = 0.00609482 Jy
! Clean residual min=-0.001449 max=0.001309 Jy/beam
! Clean residual mean=-0.000002 rms=0.000334 Jy/beam
! Combined flux in latest and established models = 0.11592 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 61 components and 0.11592 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066192Jy  sigma=1.382079
! Fit after  self-cal, rms=0.066176Jy  sigma=1.381653
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9424 x 1.896 at -0.9347 degrees (North through East)
! Clean map  min=-0.0012596  max=0.074106 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.11     KP        1.03     
!   LA        0.97     MK        1.01     NL        1.01     OV        1.00     
!   PT        0.96     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.14     KP        0.99     
!   LA        1.04     MK        1.02     NL        1.05     OV        1.02     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        1.07     KP        1.03     
!   LA        1.00     MK        0.98     NL        0.99     OV        1.01     
!   PT        0.96     SC        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.10     KP        1.03     
!   LA        0.99     MK        0.97     NL        0.99     OV        1.02     
!   PT        1.01     SC        0.96     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.05     KP        0.99     
!   LA        0.99     MK        1.06     NL        0.99     OV        1.03     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        1.10     KP        1.03     
!   LA        1.01     MK        1.02     NL        1.02     OV        0.98     
!   PT        1.02     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.01     KP        1.05     
!   LA        0.98     MK        0.94     NL        1.01     OV        0.97     
!   PT        1.00     SC        0.93     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.10     KP        0.98     
!   LA        0.99     MK        1.05     NL        1.00     OV        0.99     
!   PT        0.99     SC        0.96     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.00     KP        0.97     
!   LA        0.99     MK        1.06     NL        1.02     OV        1.01     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.03     HN        0.93     KP        0.98     
!   LA        1.02     MK        0.96     NL        1.00     OV        0.98     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.98     KP        0.99     
!   LA        1.00     MK        0.94     NL        1.02     OV        0.98     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        0.97     KP        0.92     
!   LA        1.01     MK        0.95     NL        1.00     OV        1.01     
!   PT        0.96     SC        0.94     
! 
! 
! Fit before self-cal, rms=0.066176Jy  sigma=1.381653
! Fit after  self-cal, rms=0.066167Jy  sigma=1.379477
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9393 mas, bmaj=1.891 mas, bpa=-0.5536 degrees
! Estimated noise=0.181141 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000889381 Jy
! Component: 100  -  total flux cleaned = 0.00104292 Jy
! Component: 150  -  total flux cleaned = 0.00114818 Jy
! Component: 200  -  total flux cleaned = 0.0012418 Jy
! Total flux subtracted in 200 components = 0.0012418 Jy
! Clean residual min=-0.001268 max=0.001177 Jy/beam
! Clean residual mean=-0.000001 rms=0.000290 Jy/beam
! Combined flux in latest and established models = 0.117162 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 75 components and 0.117162 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066140Jy  sigma=1.378825
! Fit after  self-cal, rms=0.066143Jy  sigma=1.378711
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066143Jy  sigma=1.378711
! Fit after  self-cal, rms=0.066540Jy  sigma=1.376597
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9379 mas, bmaj=1.886 mas, bpa=-0.728 degrees
! Estimated noise=0.180869 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00046187 Jy
! Component: 100  -  total flux cleaned = 0.000508585 Jy
! Component: 150  -  total flux cleaned = 0.0005089 Jy
! Component: 200  -  total flux cleaned = 0.000527181 Jy
! Total flux subtracted in 200 components = 0.000527181 Jy
! Clean residual min=-0.001093 max=0.001033 Jy/beam
! Clean residual mean=-0.000002 rms=0.000269 Jy/beam
! Combined flux in latest and established models = 0.117689 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 88 components and 0.117689 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066524Jy  sigma=1.376277
! Fit after  self-cal, rms=0.066538Jy  sigma=1.376159
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000192411 Jy
! Component: 100  -  total flux cleaned = 0.000175447 Jy
! Component: 150  -  total flux cleaned = 0.000159277 Jy
! Component: 200  -  total flux cleaned = 0.000159332 Jy
! Total flux subtracted in 200 components = 0.000159332 Jy
! Clean residual min=-0.001073 max=0.000996 Jy/beam
! Clean residual mean=-0.000002 rms=0.000265 Jy/beam
! Combined flux in latest and established models = 0.117848 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 97 components and 0.117849 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066529Jy  sigma=1.375987
! Fit after  self-cal, rms=0.066529Jy  sigma=1.375970
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066529Jy  sigma=1.375970
! Fit after  self-cal, rms=0.066622Jy  sigma=1.375935
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9372 mas, bmaj=1.885 mas, bpa=-0.7488 degrees
! Estimated noise=0.180723 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000111945 Jy
! Component: 100  -  total flux cleaned = 9.6458e-05 Jy
! Component: 150  -  total flux cleaned = 6.7537e-05 Jy
! Component: 200  -  total flux cleaned = 6.75065e-05 Jy
! Total flux subtracted in 200 components = 6.75065e-05 Jy
! Clean residual min=-0.001052 max=0.000951 Jy/beam
! Clean residual mean=-0.000002 rms=0.000261 Jy/beam
! Combined flux in latest and established models = 0.117916 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 99 components and 0.117916 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066614Jy  sigma=1.375801
! Fit after  self-cal, rms=0.066614Jy  sigma=1.375792
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.1627e-05 Jy
! Component: 100  -  total flux cleaned = 4.87015e-05 Jy
! Component: 150  -  total flux cleaned = 3.65578e-05 Jy
! Component: 200  -  total flux cleaned = 3.67349e-05 Jy
! Total flux subtracted in 200 components = 3.67349e-05 Jy
! Clean residual min=-0.001035 max=0.000952 Jy/beam
! Clean residual mean=-0.000002 rms=0.000260 Jy/beam
! Combined flux in latest and established models = 0.117953 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 104 components and 0.117953 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066608Jy  sigma=1.375694
! Fit after  self-cal, rms=0.066606Jy  sigma=1.375691
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066606Jy  sigma=1.375691
! Fit after  self-cal, rms=0.066597Jy  sigma=1.375679
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.118 mas, bmaj=2.86 mas, bpa=-2.448 degrees
! Estimated noise=0.220007 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.14235e-05 Jy
! Component: 100  -  total flux cleaned = -1.45839e-05 Jy
! Component: 150  -  total flux cleaned = -1.51022e-05 Jy
! Component: 200  -  total flux cleaned = 1.62583e-06 Jy
! Total flux subtracted in 200 components = 1.62583e-06 Jy
! Clean residual min=-0.001109 max=0.001168 Jy/beam
! Clean residual mean=-0.000004 rms=0.000321 Jy/beam
! Combined flux in latest and established models = 0.117954 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 118 components and 0.117954 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066594Jy  sigma=1.375640
! Fit after  self-cal, rms=0.066591Jy  sigma=1.375627
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.48045e-05 Jy
! Component: 100  -  total flux cleaned = -4.83332e-07 Jy
! Component: 150  -  total flux cleaned = -4.67114e-07 Jy
! Component: 200  -  total flux cleaned = -7.32211e-06 Jy
! Total flux subtracted in 200 components = -7.32211e-06 Jy
! Clean residual min=-0.001102 max=0.001155 Jy/beam
! Clean residual mean=-0.000004 rms=0.000319 Jy/beam
! Combined flux in latest and established models = 0.117947 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 125 components and 0.117947 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066590Jy  sigma=1.375613
! Fit after  self-cal, rms=0.066588Jy  sigma=1.375613
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9366 mas, bmaj=1.885 mas, bpa=-0.7597 degrees
! Estimated noise=0.180529 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9366 x 1.885 at -0.7597 degrees (North through East)
! Clean map  min=-0.00090384  max=0.073565 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7273 mas, bmaj=1.589 mas, bpa=0.1334 degrees
! Estimated noise=0.359242 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0532598 Jy
! Component: 100  -  total flux cleaned = 0.0733597 Jy
! Component: 150  -  total flux cleaned = 0.0836439 Jy
! Component: 200  -  total flux cleaned = 0.0904138 Jy
! Total flux subtracted in 200 components = 0.0904138 Jy
! Clean residual min=-0.002995 max=0.003847 Jy/beam
! Clean residual mean=-0.000001 rms=0.000717 Jy/beam
! Combined flux in latest and established models = 0.0904139 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.0904139 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9366 mas, bmaj=1.885 mas, bpa=-0.7597 degrees
! Estimated noise=0.180529 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00719277 Jy
! Component: 100  -  total flux cleaned = 0.0122665 Jy
! Component: 150  -  total flux cleaned = 0.0160442 Jy
! Component: 200  -  total flux cleaned = 0.0188838 Jy
! Total flux subtracted in 200 components = 0.0188838 Jy
! Clean residual min=-0.001329 max=0.001636 Jy/beam
! Clean residual mean=-0.000003 rms=0.000380 Jy/beam
! Combined flux in latest and established models = 0.109298 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 37 components and 0.109298 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.002168 Jy
! Component: 100  -  total flux cleaned = 0.0038492 Jy
! Component: 150  -  total flux cleaned = 0.00519027 Jy
! Component: 200  -  total flux cleaned = 0.00627245 Jy
! Total flux subtracted in 200 components = 0.00627245 Jy
! Clean residual min=-0.001262 max=0.001084 Jy/beam
! Clean residual mean=-0.000002 rms=0.000289 Jy/beam
! Combined flux in latest and established models = 0.11557 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 55 components and 0.11557 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.118 mas, bmaj=2.86 mas, bpa=-2.448 degrees
! Estimated noise=0.220007 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00131919 Jy
! Component: 100  -  total flux cleaned = 0.00180039 Jy
! Component: 150  -  total flux cleaned = 0.00192937 Jy
! Component: 200  -  total flux cleaned = 0.00199381 Jy
! Total flux subtracted in 200 components = 0.00199381 Jy
! Clean residual min=-0.001102 max=0.001101 Jy/beam
! Clean residual mean=-0.000004 rms=0.000333 Jy/beam
! Combined flux in latest and established models = 0.117564 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.54477e-05 Jy
! Component: 100  -  total flux cleaned = 0.000157209 Jy
! Component: 150  -  total flux cleaned = 0.000199852 Jy
! Component: 200  -  total flux cleaned = 0.00023836 Jy
! Total flux subtracted in 200 components = 0.00023836 Jy
! Clean residual min=-0.001087 max=0.001106 Jy/beam
! Clean residual mean=-0.000004 rms=0.000324 Jy/beam
! Combined flux in latest and established models = 0.117802 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 91 components and 0.117802 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9366 mas, bmaj=1.885 mas, bpa=-0.7597 degrees
! Estimated noise=0.180529 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.82549e-05 Jy
! Component: 100  -  total flux cleaned = 5.63251e-05 Jy
! Component: 150  -  total flux cleaned = 7.49797e-05 Jy
! Component: 200  -  total flux cleaned = 0.000143489 Jy
! Total flux subtracted in 200 components = 0.000143489 Jy
! Clean residual min=-0.001052 max=0.000948 Jy/beam
! Clean residual mean=-0.000002 rms=0.000260 Jy/beam
! Combined flux in latest and established models = 0.117946 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 108 components and 0.117946 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066598Jy  sigma=1.375737
! Fit after  self-cal, rms=0.066594Jy  sigma=1.375659
wmodel /J1630+2131_X_map.mod
! wmodel: Unable to open new model file: /J1630+2131_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1630+2131_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9366 x 1.885 at -0.7597 degrees (North through East)
! Clean map  min=-0.00095146  max=0.073308 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1630+2131_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0733085 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000259339 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.06129 1.06129 2.12258 4.24516 8.49032 16.9806 33.9613 67.9225
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.073 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  282.674 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1630+2131_X_dfm.log closed on Thu May 19 22:32:57 2016