! Started logfile: /scr/pima/bg219h_uvs/J1628+2247_X_dfm.log on Thu May 19 22:32:45 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J1628+2247_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1628+2247_X_uva.fits
! AN table 1: 61 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.787978 visibilities/baseline/integration-bin.
! Found source: J1628+2247
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 25956 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1628+2247_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002427Jy  sigma=24.752544
! Fit after  self-cal, rms=0.946645Jy  sigma=23.349549
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6875 mas, bmaj=1.508 mas, bpa=-3.986 degrees
! Estimated noise=0.38747 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0398043 Jy
! Component: 100  -  total flux cleaned = 0.0522015 Jy
! Total flux subtracted in 100 components = 0.0522015 Jy
! Clean residual min=-0.003581 max=0.006663 Jy/beam
! Clean residual mean=-0.000009 rms=0.000916 Jy/beam
! Combined flux in latest and established models = 0.0522015 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.0522015 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066874Jy  sigma=1.454550
! Fit after  self-cal, rms=0.065761Jy  sigma=1.425352
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00730609 Jy
! Component: 100  -  total flux cleaned = 0.011288 Jy
! Total flux subtracted in 100 components = 0.011288 Jy
! Clean residual min=-0.003299 max=0.006131 Jy/beam
! Clean residual mean=-0.000007 rms=0.000795 Jy/beam
! Combined flux in latest and established models = 0.0634895 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 22 components and 0.0634895 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064593Jy  sigma=1.387625
! Fit after  self-cal, rms=0.064598Jy  sigma=1.386958
! Inverting map 
! Added new window around map position (1.2, -1.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00518628 Jy
! Component: 100  -  total flux cleaned = 0.00795367 Jy
! Total flux subtracted in 100 components = 0.00795367 Jy
! Clean residual min=-0.002750 max=0.003030 Jy/beam
! Clean residual mean=-0.000005 rms=0.000687 Jy/beam
! Combined flux in latest and established models = 0.0714432 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 33 components and 0.0714432 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064022Jy  sigma=1.367667
! Fit after  self-cal, rms=0.063957Jy  sigma=1.365855
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8883 mas, bmaj=1.844 mas, bpa=-3.089 degrees
! Estimated noise=0.193247 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00461416 Jy
! Component: 100  -  total flux cleaned = 0.0073681 Jy
! Component: 150  -  total flux cleaned = 0.00923946 Jy
! Component: 200  -  total flux cleaned = 0.0105319 Jy
! Total flux subtracted in 200 components = 0.0105319 Jy
! Clean residual min=-0.002042 max=0.002325 Jy/beam
! Clean residual mean=-0.000008 rms=0.000517 Jy/beam
! Combined flux in latest and established models = 0.0819751 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 46 components and 0.0819751 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063628Jy  sigma=1.354635
! Fit after  self-cal, rms=0.063601Jy  sigma=1.353560
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8883 x 1.844 at -3.089 degrees (North through East)
! Clean map  min=-0.0019436  max=0.053795 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.93     HN        0.98     KP        0.98     
!   LA        0.96     MK        1.02     NL        1.03     OV        1.02     
!   PT        0.98     SC        1.10     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.02     HN        0.99     KP        0.97     
!   LA        0.96     MK        0.97     NL        1.06     OV        1.01     
!   PT        0.99     SC        1.11     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.06     HN        1.05     KP        1.03     
!   LA        0.93     MK        1.04     NL        1.04     OV        1.01     
!   PT        0.95     SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.04     HN        1.19     KP        1.02     
!   LA        0.94     MK        0.98     NL        0.99     OV        0.99     
!   PT        0.99     SC        0.94     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.04     KP        1.01     
!   LA        0.99     MK        0.99     NL        1.00     OV        0.98     
!   PT        0.97     SC        1.03     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        0.99     KP        1.02     
!   LA        0.96     MK        0.99     NL        1.04     OV        1.01     
!   PT        0.94     SC        1.11     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.98     HN        0.97     KP        1.05     
!   LA        0.95     MK        0.92     NL        1.09     OV        1.00     
!   PT        0.95     SC        0.95     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.96     HN        1.06     KP        1.04     
!   LA        0.94     MK        0.96     NL        0.97     OV        1.05     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        1.04     KP        1.01     
!   LA        0.91     MK        1.08     NL        1.01     OV        1.03     
!   PT        0.97     SC        0.89     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.96     HN        0.90     KP        1.04     
!   LA        0.96     MK        1.01     NL        1.00     OV        1.07     
!   PT        1.00     SC        1.06     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.96     HN        1.00     KP        1.03     
!   LA        0.93     MK        0.99     NL        1.02     OV        1.10     
!   PT        0.94     SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.00     KP        0.91     
!   LA        0.95     MK        0.92     NL        1.01     OV        1.06     
!   PT        0.98     SC        0.87     
! 
! 
! Fit before self-cal, rms=0.063601Jy  sigma=1.353560
! Fit after  self-cal, rms=0.063007Jy  sigma=1.350418
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8892 mas, bmaj=1.846 mas, bpa=-3.047 degrees
! Estimated noise=0.190842 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000890746 Jy
! Component: 100  -  total flux cleaned = 0.000838582 Jy
! Component: 150  -  total flux cleaned = 0.000876609 Jy
! Component: 200  -  total flux cleaned = 0.000910259 Jy
! Total flux subtracted in 200 components = 0.000910259 Jy
! Clean residual min=-0.001867 max=0.001863 Jy/beam
! Clean residual mean=-0.000004 rms=0.000451 Jy/beam
! Combined flux in latest and established models = 0.0828854 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 56 components and 0.0828853 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062982Jy  sigma=1.349630
! Fit after  self-cal, rms=0.062988Jy  sigma=1.349261
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062988Jy  sigma=1.349261
! Fit after  self-cal, rms=0.063373Jy  sigma=1.347178
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8879 mas, bmaj=1.838 mas, bpa=-2.716 degrees
! Estimated noise=0.190834 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000792717 Jy
! Component: 100  -  total flux cleaned = 0.000908429 Jy
! Component: 150  -  total flux cleaned = 0.000938854 Jy
! Component: 200  -  total flux cleaned = 0.000966601 Jy
! Total flux subtracted in 200 components = 0.000966601 Jy
! Clean residual min=-0.001706 max=0.001679 Jy/beam
! Clean residual mean=-0.000004 rms=0.000400 Jy/beam
! Combined flux in latest and established models = 0.0838519 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 59 components and 0.083852 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063361Jy  sigma=1.346742
! Fit after  self-cal, rms=0.063377Jy  sigma=1.346542
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.89485e-05 Jy
! Component: 100  -  total flux cleaned = 0.000104346 Jy
! Component: 150  -  total flux cleaned = 0.000116415 Jy
! Component: 200  -  total flux cleaned = 0.000116057 Jy
! Total flux subtracted in 200 components = 0.000116057 Jy
! Clean residual min=-0.001728 max=0.001693 Jy/beam
! Clean residual mean=-0.000004 rms=0.000398 Jy/beam
! Combined flux in latest and established models = 0.083968 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 59 components and 0.083968 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063371Jy  sigma=1.346383
! Fit after  self-cal, rms=0.063367Jy  sigma=1.346343
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063367Jy  sigma=1.346343
! Fit after  self-cal, rms=0.063586Jy  sigma=1.346272
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8874 mas, bmaj=1.834 mas, bpa=-2.642 degrees
! Estimated noise=0.191064 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000407409 Jy
! Component: 100  -  total flux cleaned = 0.00052849 Jy
! Component: 150  -  total flux cleaned = 0.00056186 Jy
! Component: 200  -  total flux cleaned = 0.000581214 Jy
! Total flux subtracted in 200 components = 0.000581214 Jy
! Clean residual min=-0.001676 max=0.001696 Jy/beam
! Clean residual mean=-0.000003 rms=0.000393 Jy/beam
! Combined flux in latest and established models = 0.0845492 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 60 components and 0.0845492 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063581Jy  sigma=1.346120
! Fit after  self-cal, rms=0.063583Jy  sigma=1.346078
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.68892e-06 Jy
! Component: 100  -  total flux cleaned = 1.30003e-05 Jy
! Component: 150  -  total flux cleaned = 1.34575e-05 Jy
! Component: 200  -  total flux cleaned = 2.11514e-05 Jy
! Total flux subtracted in 200 components = 2.11514e-05 Jy
! Clean residual min=-0.001667 max=0.001702 Jy/beam
! Clean residual mean=-0.000003 rms=0.000393 Jy/beam
! Combined flux in latest and established models = 0.0845704 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 60 components and 0.0845704 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063579Jy  sigma=1.346008
! Fit after  self-cal, rms=0.063576Jy  sigma=1.345985
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063576Jy  sigma=1.345985
! Fit after  self-cal, rms=0.063758Jy  sigma=1.345958
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.064 mas, bmaj=2.906 mas, bpa=-0.3353 degrees
! Estimated noise=0.23749 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000757228 Jy
! Component: 100  -  total flux cleaned = 0.00082977 Jy
! Component: 150  -  total flux cleaned = 0.000885141 Jy
! Component: 200  -  total flux cleaned = 0.000915861 Jy
! Total flux subtracted in 200 components = 0.000915861 Jy
! Clean residual min=-0.002273 max=0.002290 Jy/beam
! Clean residual mean=-0.000007 rms=0.000670 Jy/beam
! Combined flux in latest and established models = 0.0854862 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 65 components and 0.0854862 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063763Jy  sigma=1.345988
! Fit after  self-cal, rms=0.063761Jy  sigma=1.345899
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.48536e-05 Jy
! Component: 100  -  total flux cleaned = 0.00012521 Jy
! Component: 150  -  total flux cleaned = 0.000163318 Jy
! Component: 200  -  total flux cleaned = 0.000175789 Jy
! Total flux subtracted in 200 components = 0.000175789 Jy
! Clean residual min=-0.002249 max=0.002264 Jy/beam
! Clean residual mean=-0.000007 rms=0.000666 Jy/beam
! Combined flux in latest and established models = 0.085662 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 67 components and 0.085662 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063764Jy  sigma=1.345967
! Fit after  self-cal, rms=0.063763Jy  sigma=1.345938
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8871 mas, bmaj=1.832 mas, bpa=-2.63 degrees
! Estimated noise=0.191454 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8871 x 1.832 at -2.63 degrees (North through East)
! Clean map  min=-0.0014952  max=0.053027 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6856 mas, bmaj=1.497 mas, bpa=-3.523 degrees
! Estimated noise=0.383104 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0403229 Jy
! Component: 100  -  total flux cleaned = 0.0547315 Jy
! Component: 150  -  total flux cleaned = 0.0628861 Jy
! Component: 200  -  total flux cleaned = 0.0681572 Jy
! Total flux subtracted in 200 components = 0.0681572 Jy
! Clean residual min=-0.002893 max=0.002879 Jy/beam
! Clean residual mean=-0.000005 rms=0.000707 Jy/beam
! Combined flux in latest and established models = 0.0681572 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.0681572 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8871 mas, bmaj=1.832 mas, bpa=-2.63 degrees
! Estimated noise=0.191454 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00610588 Jy
! Component: 100  -  total flux cleaned = 0.0099315 Jy
! Component: 150  -  total flux cleaned = 0.0124316 Jy
! Component: 200  -  total flux cleaned = 0.0141325 Jy
! Total flux subtracted in 200 components = 0.0141325 Jy
! Clean residual min=-0.001775 max=0.001665 Jy/beam
! Clean residual mean=-0.000005 rms=0.000420 Jy/beam
! Combined flux in latest and established models = 0.0822898 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 47 components and 0.0822898 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.064 mas, bmaj=2.906 mas, bpa=-0.3353 degrees
! Estimated noise=0.23749 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00188739 Jy
! Component: 100  -  total flux cleaned = 0.00276613 Jy
! Component: 150  -  total flux cleaned = 0.00310608 Jy
! Component: 200  -  total flux cleaned = 0.00318131 Jy
! Total flux subtracted in 200 components = 0.00318131 Jy
! Clean residual min=-0.002217 max=0.002247 Jy/beam
! Clean residual mean=-0.000007 rms=0.000668 Jy/beam
! Combined flux in latest and established models = 0.0854711 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.91403e-05 Jy
! Component: 100  -  total flux cleaned = 8.84291e-05 Jy
! Component: 150  -  total flux cleaned = 0.000101909 Jy
! Component: 200  -  total flux cleaned = 0.000101472 Jy
! Total flux subtracted in 200 components = 0.000101472 Jy
! Clean residual min=-0.002197 max=0.002257 Jy/beam
! Clean residual mean=-0.000007 rms=0.000666 Jy/beam
! Combined flux in latest and established models = 0.0855725 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 61 components and 0.0855725 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8871 mas, bmaj=1.832 mas, bpa=-2.63 degrees
! Estimated noise=0.191454 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000348817 Jy
! Component: 100  -  total flux cleaned = -0.000372548 Jy
! Component: 150  -  total flux cleaned = -0.000392563 Jy
! Component: 200  -  total flux cleaned = -0.000428962 Jy
! Total flux subtracted in 200 components = -0.000428962 Jy
! Clean residual min=-0.001539 max=0.001715 Jy/beam
! Clean residual mean=-0.000003 rms=0.000391 Jy/beam
! Combined flux in latest and established models = 0.0851436 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 72 components and 0.0851436 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063776Jy  sigma=1.346160
! Fit after  self-cal, rms=0.063760Jy  sigma=1.345882
wmodel /J1628+2247_X_map.mod
! wmodel: Unable to open new model file: /J1628+2247_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1628+2247_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8871 x 1.832 at -2.63 degrees (North through East)
! Clean map  min=-0.0015101  max=0.052855 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1628+2247_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0528546 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000389594 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.21132 2.21132 4.42264 8.84528 17.6906 35.3811 70.7622
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.052 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  135.665 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1628+2247_X_dfm.log closed on Thu May 19 22:32:48 2016