! Started logfile: /scr/pima/bg219h_uvs/J1619+2247_S_dfm.log on Thu May 19 22:32:34 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219h_uvs/J1619+2247_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1619+2247_S_uva.fits
! AN table 1: 21 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.660317 visibilities/baseline/integration-bin.
! Found source: J1619+2247
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 2496 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1619+2247_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 55 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.198239Jy  sigma=30.131904
! Fit after  self-cal, rms=0.436646Jy  sigma=11.232932
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.554 mas, bmaj=6.19 mas, bpa=-3.092 degrees
! Estimated noise=0.948483 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.436543 Jy
! Component: 100  -  total flux cleaned = 0.532577 Jy
! Total flux subtracted in 100 components = 0.532577 Jy
! Clean residual min=-0.014610 max=0.030872 Jy/beam
! Clean residual mean=-0.000008 rms=0.004613 Jy/beam
! Combined flux in latest and established models = 0.532577 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.532577 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099445Jy  sigma=2.670180
! Fit after  self-cal, rms=0.099436Jy  sigma=2.670052
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0327148 Jy
! Component: 100  -  total flux cleaned = 0.0493938 Jy
! Total flux subtracted in 100 components = 0.0493938 Jy
! Clean residual min=-0.013633 max=0.019990 Jy/beam
! Clean residual mean=-0.000001 rms=0.004062 Jy/beam
! Combined flux in latest and established models = 0.581971 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 9 components and 0.581971 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085474Jy  sigma=2.467764
! Fit after  self-cal, rms=0.085469Jy  sigma=2.467580
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.038 mas, bmaj=7.093 mas, bpa=-5.579 degrees
! Estimated noise=0.723941 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00749339 Jy
! Component: 100  -  total flux cleaned = 0.00798703 Jy
! Component: 150  -  total flux cleaned = 0.00839763 Jy
! Component: 200  -  total flux cleaned = 0.00856904 Jy
! Total flux subtracted in 200 components = 0.00856904 Jy
! Clean residual min=-0.016909 max=0.023834 Jy/beam
! Clean residual mean=0.000016 rms=0.005804 Jy/beam
! Combined flux in latest and established models = 0.59054 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 22 components and 0.59054 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083814Jy  sigma=2.451257
! Fit after  self-cal, rms=0.083798Jy  sigma=2.451048
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.038 x 7.093 at -5.579 degrees (North through East)
! Clean map  min=-0.016493  max=0.5684 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00*    HN        1.03     KP        0.94     
!   LA        0.96     MK        0.97     NL        1.10     OV        0.97     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00*    HN        1.03     KP        0.96     
!   LA        0.95     MK        0.98     NL        0.97     OV        0.99     
!   PT        0.98     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.083798Jy  sigma=2.451048
! Fit after  self-cal, rms=0.081064Jy  sigma=2.387182
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.047 mas, bmaj=7.113 mas, bpa=-5.582 degrees
! Estimated noise=0.714867 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00617797 Jy
! Component: 100  -  total flux cleaned = -0.00992604 Jy
! Component: 150  -  total flux cleaned = -0.0112455 Jy
! Component: 200  -  total flux cleaned = -0.0119741 Jy
! Total flux subtracted in 200 components = -0.0119741 Jy
! Clean residual min=-0.015200 max=0.021428 Jy/beam
! Clean residual mean=0.000014 rms=0.005163 Jy/beam
! Combined flux in latest and established models = 0.578566 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 30 components and 0.578566 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081040Jy  sigma=2.359800
! Fit after  self-cal, rms=0.081036Jy  sigma=2.359675
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081036Jy  sigma=2.359675
! Fit after  self-cal, rms=0.076166Jy  sigma=2.270604
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.065 mas, bmaj=7.153 mas, bpa=-5.694 degrees
! Estimated noise=0.703593 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00908941 Jy
! Component: 100  -  total flux cleaned = -0.0141728 Jy
! Component: 150  -  total flux cleaned = -0.0175089 Jy
! Component: 200  -  total flux cleaned = -0.0197229 Jy
! Total flux subtracted in 200 components = -0.0197229 Jy
! Clean residual min=-0.011911 max=0.018816 Jy/beam
! Clean residual mean=-0.000012 rms=0.004308 Jy/beam
! Combined flux in latest and established models = 0.558843 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 38 components and 0.558843 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075807Jy  sigma=2.219982
! Fit after  self-cal, rms=0.075797Jy  sigma=2.219862
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (30.5, -13.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0165381 Jy
! Component: 100  -  total flux cleaned = 0.0187979 Jy
! Component: 150  -  total flux cleaned = 0.0180701 Jy
! Component: 200  -  total flux cleaned = 0.0173149 Jy
! Total flux subtracted in 200 components = 0.0173149 Jy
! Clean residual min=-0.011607 max=0.015154 Jy/beam
! Clean residual mean=-0.000007 rms=0.003717 Jy/beam
! Combined flux in latest and established models = 0.576158 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 61 components and 0.576158 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073491Jy  sigma=2.087007
! Fit after  self-cal, rms=0.073032Jy  sigma=2.077338
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073032Jy  sigma=2.077338
! Fit after  self-cal, rms=0.071602Jy  sigma=2.048471
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.076 mas, bmaj=7.177 mas, bpa=-5.629 degrees
! Estimated noise=0.696151 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0013722 Jy
! Component: 100  -  total flux cleaned = 0.000723311 Jy
! Component: 150  -  total flux cleaned = -0.000136116 Jy
! Component: 200  -  total flux cleaned = -0.00104109 Jy
! Total flux subtracted in 200 components = -0.00104109 Jy
! Clean residual min=-0.010920 max=0.015107 Jy/beam
! Clean residual mean=-0.000013 rms=0.003532 Jy/beam
! Combined flux in latest and established models = 0.575117 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 72 components and 0.575117 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071033Jy  sigma=1.990281
! Fit after  self-cal, rms=0.070950Jy  sigma=1.987919
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4.5, 22.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0134763 Jy
! Component: 100  -  total flux cleaned = 0.0175036 Jy
! Component: 150  -  total flux cleaned = 0.0172993 Jy
! Component: 200  -  total flux cleaned = 0.0173056 Jy
! Total flux subtracted in 200 components = 0.0173056 Jy
! Clean residual min=-0.011174 max=0.011507 Jy/beam
! Clean residual mean=-0.000017 rms=0.003068 Jy/beam
! Combined flux in latest and established models = 0.592423 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 102 components and 0.592422 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068887Jy  sigma=1.885645
! Fit after  self-cal, rms=0.068648Jy  sigma=1.878339
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068648Jy  sigma=1.878339
! Fit after  self-cal, rms=0.066749Jy  sigma=1.815665
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.806 mas, bmaj=10.89 mas, bpa=-7.793 degrees
! Estimated noise=0.872282 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00149057 Jy
! Component: 100  -  total flux cleaned = 0.000323891 Jy
! Component: 150  -  total flux cleaned = -0.00104166 Jy
! Component: 200  -  total flux cleaned = -0.0018234 Jy
! Total flux subtracted in 200 components = -0.0018234 Jy
! Clean residual min=-0.015274 max=0.014739 Jy/beam
! Clean residual mean=-0.000036 rms=0.004358 Jy/beam
! Combined flux in latest and established models = 0.590599 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 126 components and 0.590599 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066461Jy  sigma=1.768022
! Fit after  self-cal, rms=0.066300Jy  sigma=1.763092
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00075701 Jy
! Component: 100  -  total flux cleaned = -0.000456328 Jy
! Component: 150  -  total flux cleaned = -0.000607008 Jy
! Component: 200  -  total flux cleaned = -0.00101754 Jy
! Total flux subtracted in 200 components = -0.00101754 Jy
! Clean residual min=-0.015004 max=0.013185 Jy/beam
! Clean residual mean=-0.000033 rms=0.004086 Jy/beam
! Combined flux in latest and established models = 0.589582 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 142 components and 0.589582 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066350Jy  sigma=1.750362
! Fit after  self-cal, rms=0.066309Jy  sigma=1.748819
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.08 mas, bmaj=7.201 mas, bpa=-5.684 degrees
! Estimated noise=0.693319 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.08 x 7.201 at -5.684 degrees (North through East)
! Clean map  min=-0.010192  max=0.54566 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066309Jy  sigma=1.748819
! Fit after  self-cal, rms=0.062498Jy  sigma=1.659111
! Inverting map and beam 
! Estimated beam: bmin=3.08 mas, bmaj=7.207 mas, bpa=-5.717 degrees
! Estimated noise=0.686712 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00248619 Jy
! Component: 100  -  total flux cleaned = 0.0036185 Jy
! Component: 150  -  total flux cleaned = 0.00345576 Jy
! Component: 200  -  total flux cleaned = 0.00289841 Jy
! Total flux subtracted in 200 components = 0.00289841 Jy
! Clean residual min=-0.010423 max=0.009874 Jy/beam
! Clean residual mean=-0.000019 rms=0.002580 Jy/beam
! Combined flux in latest and established models = 0.59248 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 165 components and 0.59248 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061797Jy  sigma=1.621207
! Fit after  self-cal, rms=0.061732Jy  sigma=1.618890
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00146228 Jy
! Component: 100  -  total flux cleaned = 0.00132786 Jy
! Component: 150  -  total flux cleaned = 0.000858146 Jy
! Component: 200  -  total flux cleaned = 0.000645193 Jy
! Total flux subtracted in 200 components = 0.000645193 Jy
! Clean residual min=-0.010182 max=0.009446 Jy/beam
! Clean residual mean=-0.000018 rms=0.002503 Jy/beam
! Combined flux in latest and established models = 0.593126 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 170 components and 0.593126 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061404Jy  sigma=1.602002
! Fit after  self-cal, rms=0.061388Jy  sigma=1.601231
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061388Jy  sigma=1.601231
! Fit after  self-cal, rms=0.060696Jy  sigma=1.580403
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.582 mas, bmaj=6.268 mas, bpa=-3.381 degrees
! Estimated noise=0.904286 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.415947 Jy
! Component: 100  -  total flux cleaned = 0.506835 Jy
! Component: 150  -  total flux cleaned = 0.538408 Jy
! Component: 200  -  total flux cleaned = 0.560495 Jy
! Total flux subtracted in 200 components = 0.560495 Jy
! Clean residual min=-0.011496 max=0.018635 Jy/beam
! Clean residual mean=-0.000015 rms=0.003143 Jy/beam
! Combined flux in latest and established models = 0.560495 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.560495 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.08 mas, bmaj=7.224 mas, bpa=-5.768 degrees
! Estimated noise=0.684044 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (79, -47).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0227403 Jy
! Component: 100  -  total flux cleaned = 0.0361498 Jy
! Component: 150  -  total flux cleaned = 0.0422979 Jy
! Component: 200  -  total flux cleaned = 0.0450285 Jy
! Total flux subtracted in 200 components = 0.0450285 Jy
! Clean residual min=-0.009948 max=0.013705 Jy/beam
! Clean residual mean=-0.000013 rms=0.002805 Jy/beam
! Combined flux in latest and established models = 0.605523 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 61 components and 0.605523 Jy
! Inverting map 
! Added new window around map position (26, -63).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0100046 Jy
! Component: 100  -  total flux cleaned = 0.00999249 Jy
! Component: 150  -  total flux cleaned = 0.00998108 Jy
! Component: 200  -  total flux cleaned = 0.0106707 Jy
! Total flux subtracted in 200 components = 0.0106707 Jy
! Clean residual min=-0.009226 max=0.010685 Jy/beam
! Clean residual mean=-0.000011 rms=0.002398 Jy/beam
! Combined flux in latest and established models = 0.616194 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 85 components and 0.616194 Jy
! Inverting map 
! Added new window around map position (-77.5, 45).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00892479 Jy
! Component: 100  -  total flux cleaned = 0.0101568 Jy
! Component: 150  -  total flux cleaned = 0.0113503 Jy
! Component: 200  -  total flux cleaned = 0.0126142 Jy
! Total flux subtracted in 200 components = 0.0126142 Jy
! Clean residual min=-0.008469 max=0.007368 Jy/beam
! Clean residual mean=-0.000007 rms=0.002015 Jy/beam
! Combined flux in latest and established models = 0.628808 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 120 components and 0.628808 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.801 mas, bmaj=10.93 mas, bpa=-7.93 degrees
! Estimated noise=0.85955 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00430428 Jy
! Component: 100  -  total flux cleaned = 0.00571751 Jy
! Component: 150  -  total flux cleaned = 0.00706453 Jy
! Component: 200  -  total flux cleaned = 0.00801664 Jy
! Total flux subtracted in 200 components = 0.00801664 Jy
! Clean residual min=-0.010171 max=0.008482 Jy/beam
! Clean residual mean=-0.000008 rms=0.002622 Jy/beam
! Combined flux in latest and established models = 0.636825 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000616102 Jy
! Component: 100  -  total flux cleaned = 0.000843506 Jy
! Component: 150  -  total flux cleaned = 0.00105586 Jy
! Component: 200  -  total flux cleaned = 0.00105762 Jy
! Total flux subtracted in 200 components = 0.00105762 Jy
! Clean residual min=-0.009687 max=0.008005 Jy/beam
! Clean residual mean=-0.000007 rms=0.002529 Jy/beam
! Combined flux in latest and established models = 0.637882 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 174 components and 0.637882 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.08 mas, bmaj=7.224 mas, bpa=-5.768 degrees
! Estimated noise=0.684044 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000636847 Jy
! Component: 100  -  total flux cleaned = 0.00122247 Jy
! Component: 150  -  total flux cleaned = 0.00176141 Jy
! Component: 200  -  total flux cleaned = 0.00251501 Jy
! Total flux subtracted in 200 components = 0.00251501 Jy
! Clean residual min=-0.007524 max=0.005957 Jy/beam
! Clean residual mean=-0.000005 rms=0.001799 Jy/beam
! Combined flux in latest and established models = 0.640397 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 196 components and 0.640397 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058644Jy  sigma=1.456980
! Fit after  self-cal, rms=0.058363Jy  sigma=1.448402
wmodel /J1619+2247_S_map.mod
! wmodel: Unable to open new model file: /J1619+2247_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1619+2247_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.08 x 7.224 at -5.768 degrees (North through East)
! Clean map  min=-0.0075946  max=0.52581 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1619+2247_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.525808 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00177 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.00987 1.00987 2.01974 4.03949 8.07898 16.158 32.3159 64.6318
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0053 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.525 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  297.067 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1619+2247_S_dfm.log closed on Thu May 19 22:32:36 2016