! Started logfile: /scr/pima/bg219h_uvs/J1509-0735_X_dfm.log on Thu May 19 22:30:41 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J1509-0735_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1509-0735_X_uva.fits
! AN table 1: 52 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.883547 visibilities/baseline/integration-bin.
! Found source: J1509-0735
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 19848 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1509-0735_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 37 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.016951Jy  sigma=22.616287
! Fit after  self-cal, rms=0.876089Jy  sigma=19.341947
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6682 mas, bmaj=1.634 mas, bpa=-3.216 degrees
! Estimated noise=0.499302 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0876088 Jy
! Component: 100  -  total flux cleaned = 0.114804 Jy
! Total flux subtracted in 100 components = 0.114804 Jy
! Clean residual min=-0.007628 max=0.017201 Jy/beam
! Clean residual mean=-0.000010 rms=0.002168 Jy/beam
! Combined flux in latest and established models = 0.114804 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.114804 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082812Jy  sigma=1.696993
! Fit after  self-cal, rms=0.082579Jy  sigma=1.691992
! Inverting map 
! Added new window around map position (1, 0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0185262 Jy
! Component: 100  -  total flux cleaned = 0.0311323 Jy
! Total flux subtracted in 100 components = 0.0311323 Jy
! Clean residual min=-0.005397 max=0.009585 Jy/beam
! Clean residual mean=-0.000006 rms=0.001471 Jy/beam
! Combined flux in latest and established models = 0.145936 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 15 components and 0.145936 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075442Jy  sigma=1.497799
! Fit after  self-cal, rms=0.074955Jy  sigma=1.486602
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0107679 Jy
! Component: 100  -  total flux cleaned = 0.0181273 Jy
! Total flux subtracted in 100 components = 0.0181273 Jy
! Clean residual min=-0.004401 max=0.006582 Jy/beam
! Clean residual mean=-0.000004 rms=0.001084 Jy/beam
! Combined flux in latest and established models = 0.164063 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 32 components and 0.164063 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072353Jy  sigma=1.413794
! Fit after  self-cal, rms=0.072119Jy  sigma=1.408462
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8618 mas, bmaj=1.919 mas, bpa=-3.148 degrees
! Estimated noise=0.244947 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0110691 Jy
! Component: 100  -  total flux cleaned = 0.0179706 Jy
! Component: 150  -  total flux cleaned = 0.0227408 Jy
! Component: 200  -  total flux cleaned = 0.0260828 Jy
! Total flux subtracted in 200 components = 0.0260828 Jy
! Clean residual min=-0.002137 max=0.003297 Jy/beam
! Clean residual mean=-0.000003 rms=0.000631 Jy/beam
! Combined flux in latest and established models = 0.190146 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 63 components and 0.190146 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070335Jy  sigma=1.356869
! Fit after  self-cal, rms=0.070277Jy  sigma=1.355045
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8618 x 1.919 at -3.148 degrees (North through East)
! Clean map  min=-0.0021575  max=0.12014 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        1.13     KP        0.97     
!   MK        1.05     NL        0.97     OV        1.01     PT        0.97     
!   SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        1.07     KP        0.98     
!   MK        1.01     NL        0.98     OV        0.98     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.96     HN        1.07     KP        0.98     
!   MK        1.00     NL        1.03     OV        1.01     PT        0.98     
!   SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.04     KP        0.94     
!   MK        1.05     NL        0.98     OV        0.98     PT        0.98     
!   SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.06     KP        0.97     
!   MK        0.97     NL        1.01     OV        0.98     PT        0.97     
!   SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.09     KP        0.98     
!   MK        1.02     NL        1.02     OV        1.00     PT        0.97     
!   SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.06     KP        0.95     
!   MK        1.01     NL        0.98     OV        0.99     PT        1.02     
!   SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.05     KP        0.98     
!   MK        0.94     NL        1.01     OV        0.96     PT        0.98     
!   SC        1.04     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.05     KP        0.97     
!   MK        0.95     NL        1.02     OV        0.98     PT        0.97     
!   SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.01     KP        1.00     
!   MK        0.95     NL        1.03     OV        0.97     PT        1.01     
!   SC        0.96     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.12     KP        0.94     
!   MK        1.00     NL        0.97     OV        1.03     PT        0.97     
!   SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.06     KP        0.98     
!   MK        1.02     NL        0.96     OV        0.97     PT        1.00     
!   SC        1.01     
! 
! 
! Fit before self-cal, rms=0.070277Jy  sigma=1.355045
! Fit after  self-cal, rms=0.071358Jy  sigma=1.349050
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8668 mas, bmaj=1.924 mas, bpa=-3.113 degrees
! Estimated noise=0.242566 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00124323 Jy
! Component: 100  -  total flux cleaned = 0.0013497 Jy
! Component: 150  -  total flux cleaned = 0.00143713 Jy
! Component: 200  -  total flux cleaned = 0.00156181 Jy
! Total flux subtracted in 200 components = 0.00156181 Jy
! Clean residual min=-0.001742 max=0.001868 Jy/beam
! Clean residual mean=-0.000001 rms=0.000440 Jy/beam
! Combined flux in latest and established models = 0.191708 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 78 components and 0.191708 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071317Jy  sigma=1.348147
! Fit after  self-cal, rms=0.071352Jy  sigma=1.347894
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071352Jy  sigma=1.347894
! Fit after  self-cal, rms=0.071351Jy  sigma=1.344242
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8662 mas, bmaj=1.924 mas, bpa=-3.169 degrees
! Estimated noise=0.24265 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000866449 Jy
! Component: 100  -  total flux cleaned = 0.00102583 Jy
! Component: 150  -  total flux cleaned = 0.00112988 Jy
! Component: 200  -  total flux cleaned = 0.00121321 Jy
! Total flux subtracted in 200 components = 0.00121321 Jy
! Clean residual min=-0.001398 max=0.001724 Jy/beam
! Clean residual mean=-0.000000 rms=0.000375 Jy/beam
! Combined flux in latest and established models = 0.192921 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 80 components and 0.192921 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071330Jy  sigma=1.343824
! Fit after  self-cal, rms=0.071334Jy  sigma=1.343643
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (11.4, -3.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00123082 Jy
! Component: 100  -  total flux cleaned = 0.00150595 Jy
! Component: 150  -  total flux cleaned = 0.00166148 Jy
! Component: 200  -  total flux cleaned = 0.00175624 Jy
! Total flux subtracted in 200 components = 0.00175624 Jy
! Clean residual min=-0.001402 max=0.001561 Jy/beam
! Clean residual mean=-0.000000 rms=0.000342 Jy/beam
! Combined flux in latest and established models = 0.194677 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 96 components and 0.194677 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071285Jy  sigma=1.342557
! Fit after  self-cal, rms=0.071287Jy  sigma=1.342478
! Inverting map 
! Added new window around map position (21.6, -42.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000749243 Jy
! Component: 100  -  total flux cleaned = 0.00108491 Jy
! Component: 150  -  total flux cleaned = 0.00128803 Jy
! Component: 200  -  total flux cleaned = 0.00144114 Jy
! Total flux subtracted in 200 components = 0.00144114 Jy
! Clean residual min=-0.001347 max=0.001323 Jy/beam
! Clean residual mean=-0.000000 rms=0.000327 Jy/beam
! Combined flux in latest and established models = 0.196119 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 110 components and 0.196119 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071244Jy  sigma=1.341736
! Fit after  self-cal, rms=0.071245Jy  sigma=1.341692
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071245Jy  sigma=1.341692
! Fit after  self-cal, rms=0.070920Jy  sigma=1.341585
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.866 mas, bmaj=1.924 mas, bpa=-3.131 degrees
! Estimated noise=0.242611 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00039293 Jy
! Component: 100  -  total flux cleaned = 0.000567067 Jy
! Component: 150  -  total flux cleaned = 0.000679522 Jy
! Component: 200  -  total flux cleaned = 0.000721165 Jy
! Total flux subtracted in 200 components = 0.000721165 Jy
! Clean residual min=-0.001297 max=0.001246 Jy/beam
! Clean residual mean=-0.000000 rms=0.000317 Jy/beam
! Combined flux in latest and established models = 0.19684 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 120 components and 0.19684 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070900Jy  sigma=1.341291
! Fit after  self-cal, rms=0.070896Jy  sigma=1.341271
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.86954e-05 Jy
! Component: 100  -  total flux cleaned = 2.1182e-05 Jy
! Component: 150  -  total flux cleaned = 5.82365e-05 Jy
! Component: 200  -  total flux cleaned = 5.80955e-05 Jy
! Total flux subtracted in 200 components = 5.80955e-05 Jy
! Clean residual min=-0.001280 max=0.001215 Jy/beam
! Clean residual mean=-0.000000 rms=0.000313 Jy/beam
! Combined flux in latest and established models = 0.196898 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 124 components and 0.196898 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070884Jy  sigma=1.341085
! Fit after  self-cal, rms=0.070884Jy  sigma=1.341069
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070884Jy  sigma=1.341069
! Fit after  self-cal, rms=0.070874Jy  sigma=1.341056
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.035 mas, bmaj=3.267 mas, bpa=3.848 degrees
! Estimated noise=0.306966 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000604965 Jy
! Component: 100  -  total flux cleaned = 0.000588009 Jy
! Component: 150  -  total flux cleaned = 0.000575669 Jy
! Component: 200  -  total flux cleaned = 0.00060233 Jy
! Total flux subtracted in 200 components = 0.00060233 Jy
! Clean residual min=-0.001258 max=0.001102 Jy/beam
! Clean residual mean=-0.000000 rms=0.000311 Jy/beam
! Combined flux in latest and established models = 0.1975 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 135 components and 0.1975 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070866Jy  sigma=1.340995
! Fit after  self-cal, rms=0.070862Jy  sigma=1.340915
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.14655e-05 Jy
! Component: 100  -  total flux cleaned = 8.7074e-05 Jy
! Component: 150  -  total flux cleaned = 9.78789e-05 Jy
! Component: 200  -  total flux cleaned = 0.000119279 Jy
! Total flux subtracted in 200 components = 0.000119279 Jy
! Clean residual min=-0.001227 max=0.001091 Jy/beam
! Clean residual mean=-0.000000 rms=0.000304 Jy/beam
! Combined flux in latest and established models = 0.19762 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 140 components and 0.19762 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070861Jy  sigma=1.340932
! Fit after  self-cal, rms=0.070858Jy  sigma=1.340876
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8665 mas, bmaj=1.925 mas, bpa=-3.109 degrees
! Estimated noise=0.242855 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8665 x 1.925 at -3.109 degrees (North through East)
! Clean map  min=-0.0013468  max=0.11764 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6704 mas, bmaj=1.635 mas, bpa=-3.111 degrees
! Estimated noise=0.498687 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0871058 Jy
! Component: 100  -  total flux cleaned = 0.117622 Jy
! Component: 150  -  total flux cleaned = 0.137171 Jy
! Component: 200  -  total flux cleaned = 0.150732 Jy
! Total flux subtracted in 200 components = 0.150732 Jy
! Clean residual min=-0.004219 max=0.007488 Jy/beam
! Clean residual mean=-0.000005 rms=0.001201 Jy/beam
! Combined flux in latest and established models = 0.150732 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.150732 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8665 mas, bmaj=1.925 mas, bpa=-3.109 degrees
! Estimated noise=0.242855 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0154454 Jy
! Component: 100  -  total flux cleaned = 0.0242681 Jy
! Component: 150  -  total flux cleaned = 0.029886 Jy
! Component: 200  -  total flux cleaned = 0.0337566 Jy
! Total flux subtracted in 200 components = 0.0337566 Jy
! Clean residual min=-0.001836 max=0.003173 Jy/beam
! Clean residual mean=-0.000003 rms=0.000550 Jy/beam
! Combined flux in latest and established models = 0.184489 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 53 components and 0.184489 Jy
! Inverting map 
! Added new window around map position (2.2, 0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00316435 Jy
! Component: 100  -  total flux cleaned = 0.00537343 Jy
! Component: 150  -  total flux cleaned = 0.00674334 Jy
! Component: 200  -  total flux cleaned = 0.00778303 Jy
! Total flux subtracted in 200 components = 0.00778303 Jy
! Clean residual min=-0.001369 max=0.001427 Jy/beam
! Clean residual mean=-0.000001 rms=0.000368 Jy/beam
! Combined flux in latest and established models = 0.192272 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 76 components and 0.192272 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.035 mas, bmaj=3.267 mas, bpa=3.848 degrees
! Estimated noise=0.306966 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00185938 Jy
! Component: 100  -  total flux cleaned = 0.00279826 Jy
! Component: 150  -  total flux cleaned = 0.00348774 Jy
! Component: 200  -  total flux cleaned = 0.00405227 Jy
! Total flux subtracted in 200 components = 0.00405227 Jy
! Clean residual min=-0.001261 max=0.001167 Jy/beam
! Clean residual mean=-0.000001 rms=0.000331 Jy/beam
! Combined flux in latest and established models = 0.196324 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000467197 Jy
! Component: 100  -  total flux cleaned = 0.000820601 Jy
! Component: 150  -  total flux cleaned = 0.000973815 Jy
! Component: 200  -  total flux cleaned = 0.00105049 Jy
! Total flux subtracted in 200 components = 0.00105049 Jy
! Clean residual min=-0.001230 max=0.001099 Jy/beam
! Clean residual mean=-0.000000 rms=0.000312 Jy/beam
! Combined flux in latest and established models = 0.197375 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 128 components and 0.197375 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8665 mas, bmaj=1.925 mas, bpa=-3.109 degrees
! Estimated noise=0.242855 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.24463e-05 Jy
! Component: 100  -  total flux cleaned = -0.000110794 Jy
! Component: 150  -  total flux cleaned = -0.000108217 Jy
! Component: 200  -  total flux cleaned = 1.18173e-05 Jy
! Total flux subtracted in 200 components = 1.18173e-05 Jy
! Clean residual min=-0.001214 max=0.001231 Jy/beam
! Clean residual mean=-0.000000 rms=0.000306 Jy/beam
! Combined flux in latest and established models = 0.197386 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 151 components and 0.197386 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070882Jy  sigma=1.341022
! Fit after  self-cal, rms=0.070855Jy  sigma=1.340805
wmodel /J1509-0735_X_map.mod
! wmodel: Unable to open new model file: /J1509-0735_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1509-0735_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8665 x 1.925 at -3.109 degrees (North through East)
! Clean map  min=-0.0012486  max=0.11734 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1509-0735_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.117336 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000302237 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.772747 0.772747 1.54549 3.09099 6.18197 12.3639 24.7279 49.4558 98.9116
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.117 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  388.225 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1509-0735_X_dfm.log closed on Thu May 19 22:30:44 2016