! Started logfile: /scr/pima/bg219h_uvs/J1459-3655_X_dfm.log on Thu May 19 22:30:18 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J1459-3655_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1459-3655_X_uva.fits
! AN table 1: 52 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.618376 visibilities/baseline/integration-bin.
! Found source: J1459-3655
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 17364 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1459-3655_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 89 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.022025Jy  sigma=18.448797
! Fit after  self-cal, rms=0.890809Jy  sigma=15.951057
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7503 mas, bmaj=2 mas, bpa=-1.45 degrees
! Estimated noise=0.603282 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0737731 Jy
! Component: 100  -  total flux cleaned = 0.107156 Jy
! Total flux subtracted in 100 components = 0.107156 Jy
! Clean residual min=-0.010632 max=0.023082 Jy/beam
! Clean residual mean=0.000123 rms=0.003476 Jy/beam
! Combined flux in latest and established models = 0.107156 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.107156 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.112059Jy  sigma=1.908016
! Fit after  self-cal, rms=0.111422Jy  sigma=1.897376
! Inverting map 
! Added new window around map position (-5.2, 2.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0245944 Jy
! Component: 100  -  total flux cleaned = 0.040808 Jy
! Total flux subtracted in 100 components = 0.040808 Jy
! Clean residual min=-0.007358 max=0.014641 Jy/beam
! Clean residual mean=0.000100 rms=0.002674 Jy/beam
! Combined flux in latest and established models = 0.147964 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 30 components and 0.147964 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.102811Jy  sigma=1.705338
! Fit after  self-cal, rms=0.102203Jy  sigma=1.695442
! Inverting map 
! Added new window around map position (-3.6, 2.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0162853 Jy
! Component: 100  -  total flux cleaned = 0.0281236 Jy
! Total flux subtracted in 100 components = 0.0281236 Jy
! Clean residual min=-0.006486 max=0.012524 Jy/beam
! Clean residual mean=0.000085 rms=0.002210 Jy/beam
! Combined flux in latest and established models = 0.176087 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 41 components and 0.176087 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.097351Jy  sigma=1.580926
! Fit after  self-cal, rms=0.097050Jy  sigma=1.577077
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9726 mas, bmaj=2.672 mas, bpa=-2.035 degrees
! Estimated noise=0.32342 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0228354 Jy
! Component: 100  -  total flux cleaned = 0.0392707 Jy
! Component: 150  -  total flux cleaned = 0.051377 Jy
! Component: 200  -  total flux cleaned = 0.0603984 Jy
! Total flux subtracted in 200 components = 0.0603984 Jy
! Clean residual min=-0.007279 max=0.013913 Jy/beam
! Clean residual mean=0.000093 rms=0.002500 Jy/beam
! Combined flux in latest and established models = 0.236486 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 70 components and 0.236486 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090841Jy  sigma=1.416374
! Fit after  self-cal, rms=0.090339Jy  sigma=1.408857
! Inverting map 
! Added new window around map position (-1.8, 1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0135562 Jy
! Component: 100  -  total flux cleaned = 0.0213268 Jy
! Component: 150  -  total flux cleaned = 0.0268595 Jy
! Component: 200  -  total flux cleaned = 0.0291737 Jy
! Total flux subtracted in 200 components = 0.0291737 Jy
! Clean residual min=-0.005950 max=0.010753 Jy/beam
! Clean residual mean=0.000062 rms=0.001617 Jy/beam
! Combined flux in latest and established models = 0.265659 Jy
! Performing phase self-cal
! Adding 56 model components to the UV plane model.
! The established model now contains 117 components and 0.265659 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088048Jy  sigma=1.362539
! Fit after  self-cal, rms=0.087778Jy  sigma=1.355686
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9726 x 2.672 at -2.035 degrees (North through East)
! Clean map  min=-0.0049712  max=0.099188 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.01     HN        1.13     KP        0.93     
!   LA        0.98     MK        1.00     NL        1.16     OV        0.99     
!   PT        0.95     SC        1.06     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.98     HN        1.19     KP        0.97     
!   LA        0.95     MK        1.01     NL        1.13     OV        0.98     
!   PT        0.94     SC        1.06     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.15     FD        1.02     HN        1.19     KP        0.97     
!   LA        0.95     MK        0.94     NL        1.17     OV        1.00     
!   PT        0.93     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        1.02     HN        1.18     KP        1.00     
!   LA        0.97     MK        1.01     NL        1.18     OV        0.97     
!   PT        0.94     SC        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.15     FD        0.97     HN        1.10     KP        0.99     
!   LA        0.95     MK        0.95     NL        1.14     OV        1.00     
!   PT        0.92     SC        1.05     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        1.04     HN        1.15     KP        0.97     
!   LA        0.92     MK        1.02     NL        1.16     OV        1.01     
!   PT        0.95     SC        1.08     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        0.97     HN        0.98     KP        0.87     
!   LA        0.98     MK        0.84     NL        1.18     OV        0.99     
!   PT        1.01     SC        1.07     
! 
! 
! Fit before self-cal, rms=0.087778Jy  sigma=1.355686
! Fit after  self-cal, rms=0.091824Jy  sigma=1.342896
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9757 mas, bmaj=2.681 mas, bpa=-2.354 degrees
! Estimated noise=0.32855 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00359576 Jy
! Component: 100  -  total flux cleaned = 0.00461195 Jy
! Component: 150  -  total flux cleaned = 0.0050283 Jy
! Component: 200  -  total flux cleaned = 0.00529202 Jy
! Total flux subtracted in 200 components = 0.00529202 Jy
! Clean residual min=-0.003876 max=0.005496 Jy/beam
! Clean residual mean=0.000047 rms=0.000983 Jy/beam
! Combined flux in latest and established models = 0.270951 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 136 components and 0.270951 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091443Jy  sigma=1.336493
! Fit after  self-cal, rms=0.091636Jy  sigma=1.334701
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091636Jy  sigma=1.334701
! Fit after  self-cal, rms=0.091865Jy  sigma=1.333006
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9762 mas, bmaj=2.683 mas, bpa=-2.289 degrees
! Estimated noise=0.329084 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00184342 Jy
! Component: 100  -  total flux cleaned = 0.00202904 Jy
! Component: 150  -  total flux cleaned = 0.00226281 Jy
! Component: 200  -  total flux cleaned = 0.00246811 Jy
! Total flux subtracted in 200 components = 0.00246811 Jy
! Clean residual min=-0.003535 max=0.004707 Jy/beam
! Clean residual mean=0.000044 rms=0.000879 Jy/beam
! Combined flux in latest and established models = 0.273419 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 149 components and 0.27342 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091678Jy  sigma=1.330210
! Fit after  self-cal, rms=0.091704Jy  sigma=1.329657
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.4, -1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00374711 Jy
! Component: 100  -  total flux cleaned = 0.00555088 Jy
! Component: 150  -  total flux cleaned = 0.00618063 Jy
! Component: 200  -  total flux cleaned = 0.00660505 Jy
! Total flux subtracted in 200 components = 0.00660505 Jy
! Clean residual min=-0.002893 max=0.002969 Jy/beam
! Clean residual mean=0.000037 rms=0.000730 Jy/beam
! Combined flux in latest and established models = 0.280025 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 172 components and 0.280025 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091485Jy  sigma=1.325618
! Fit after  self-cal, rms=0.091504Jy  sigma=1.325303
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091504Jy  sigma=1.325303
! Fit after  self-cal, rms=0.091831Jy  sigma=1.320766
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9749 mas, bmaj=2.673 mas, bpa=-2.119 degrees
! Estimated noise=0.328565 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00209679 Jy
! Component: 100  -  total flux cleaned = 0.00270087 Jy
! Component: 150  -  total flux cleaned = 0.00305916 Jy
! Component: 200  -  total flux cleaned = 0.00337902 Jy
! Total flux subtracted in 200 components = 0.00337902 Jy
! Clean residual min=-0.002783 max=0.002625 Jy/beam
! Clean residual mean=0.000023 rms=0.000603 Jy/beam
! Combined flux in latest and established models = 0.283404 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 183 components and 0.283403 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091746Jy  sigma=1.319399
! Fit after  self-cal, rms=0.091791Jy  sigma=1.319185
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000537843 Jy
! Component: 100  -  total flux cleaned = 0.000784048 Jy
! Component: 150  -  total flux cleaned = 0.000973914 Jy
! Component: 200  -  total flux cleaned = 0.00111652 Jy
! Total flux subtracted in 200 components = 0.00111652 Jy
! Clean residual min=-0.002683 max=0.002585 Jy/beam
! Clean residual mean=0.000023 rms=0.000587 Jy/beam
! Combined flux in latest and established models = 0.28452 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 199 components and 0.28452 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091750Jy  sigma=1.318651
! Fit after  self-cal, rms=0.091782Jy  sigma=1.318622
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091782Jy  sigma=1.318622
! Fit after  self-cal, rms=0.091181Jy  sigma=1.318453
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.274 mas, bmaj=7.654 mas, bpa=-3.437 degrees
! Estimated noise=0.390311 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00149268 Jy
! Component: 100  -  total flux cleaned = 0.00193659 Jy
! Component: 150  -  total flux cleaned = 0.00207165 Jy
! Component: 200  -  total flux cleaned = 0.0021947 Jy
! Total flux subtracted in 200 components = 0.0021947 Jy
! Clean residual min=-0.002331 max=0.002859 Jy/beam
! Clean residual mean=0.000038 rms=0.000816 Jy/beam
! Combined flux in latest and established models = 0.286715 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 209 components and 0.286715 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091147Jy  sigma=1.318167
! Fit after  self-cal, rms=0.091148Jy  sigma=1.318111
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.65033e-05 Jy
! Component: 100  -  total flux cleaned = 0.000165692 Jy
! Component: 150  -  total flux cleaned = 0.000190593 Jy
! Component: 200  -  total flux cleaned = 0.000215009 Jy
! Total flux subtracted in 200 components = 0.000215009 Jy
! Clean residual min=-0.002375 max=0.002857 Jy/beam
! Clean residual mean=0.000038 rms=0.000810 Jy/beam
! Combined flux in latest and established models = 0.28693 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 217 components and 0.28693 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091133Jy  sigma=1.318087
! Fit after  self-cal, rms=0.091137Jy  sigma=1.318040
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9749 mas, bmaj=2.675 mas, bpa=-2.18 degrees
! Estimated noise=0.327904 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9749 x 2.675 at -2.18 degrees (North through East)
! Clean map  min=-0.0025034  max=0.095199 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7486 mas, bmaj=1.994 mas, bpa=-1.686 degrees
! Estimated noise=0.611865 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0736927 Jy
! Component: 100  -  total flux cleaned = 0.113505 Jy
! Component: 150  -  total flux cleaned = 0.140026 Jy
! Component: 200  -  total flux cleaned = 0.160331 Jy
! Total flux subtracted in 200 components = 0.160331 Jy
! Clean residual min=-0.008159 max=0.012880 Jy/beam
! Clean residual mean=0.000092 rms=0.002561 Jy/beam
! Combined flux in latest and established models = 0.160331 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 41 model components to the UV plane model.
! The established model now contains 41 components and 0.160331 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9749 mas, bmaj=2.675 mas, bpa=-2.18 degrees
! Estimated noise=0.327904 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0303597 Jy
! Component: 100  -  total flux cleaned = 0.0521327 Jy
! Component: 150  -  total flux cleaned = 0.0683101 Jy
! Component: 200  -  total flux cleaned = 0.0804608 Jy
! Total flux subtracted in 200 components = 0.0804608 Jy
! Clean residual min=-0.004762 max=0.007006 Jy/beam
! Clean residual mean=0.000070 rms=0.001859 Jy/beam
! Combined flux in latest and established models = 0.240792 Jy
! Adding 97 model components to the UV plane model.
! The established model now contains 127 components and 0.240792 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.274 mas, bmaj=7.654 mas, bpa=-3.437 degrees
! Estimated noise=0.390311 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0151116 Jy
! Component: 100  -  total flux cleaned = 0.0246602 Jy
! Component: 150  -  total flux cleaned = 0.030982 Jy
! Component: 200  -  total flux cleaned = 0.035298 Jy
! Total flux subtracted in 200 components = 0.035298 Jy
! Clean residual min=-0.003172 max=0.003364 Jy/beam
! Clean residual mean=0.000057 rms=0.001056 Jy/beam
! Combined flux in latest and established models = 0.27609 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00302281 Jy
! Component: 100  -  total flux cleaned = 0.00516963 Jy
! Component: 150  -  total flux cleaned = 0.00671428 Jy
! Component: 200  -  total flux cleaned = 0.00783378 Jy
! Total flux subtracted in 200 components = 0.00783378 Jy
! Clean residual min=-0.002508 max=0.002941 Jy/beam
! Clean residual mean=0.000044 rms=0.000823 Jy/beam
! Combined flux in latest and established models = 0.283924 Jy
! Adding 126 model components to the UV plane model.
! The established model now contains 233 components and 0.283924 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9749 mas, bmaj=2.675 mas, bpa=-2.18 degrees
! Estimated noise=0.327904 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00131815 Jy
! Component: 100  -  total flux cleaned = 0.00181604 Jy
! Component: 150  -  total flux cleaned = 0.00204813 Jy
! Component: 200  -  total flux cleaned = 0.00225375 Jy
! Total flux subtracted in 200 components = 0.00225375 Jy
! Clean residual min=-0.002547 max=0.002602 Jy/beam
! Clean residual mean=0.000022 rms=0.000567 Jy/beam
! Combined flux in latest and established models = 0.286177 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 246 components and 0.286177 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091076Jy  sigma=1.317836
! Fit after  self-cal, rms=0.091107Jy  sigma=1.317384
wmodel /J1459-3655_X_map.mod
! wmodel: Unable to open new model file: /J1459-3655_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1459-3655_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9749 x 2.675 at -2.18 degrees (North through East)
! Clean map  min=-0.0024995  max=0.096754 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1459-3655_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0967538 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000563194 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.74627 1.74627 3.49254 6.98508 13.9702 27.9403 55.8806
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0016 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.096 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  171.794 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1459-3655_X_dfm.log closed on Thu May 19 22:30:21 2016