! Started logfile: /scr/pima/bg219h_uvs/J1429+6316_X_uvs.log on Thu Apr 7 12:12:48 2016 obs /scr/pima/bg219h_uvs/J1429+6316_X_uva.fits ! Reading UV FITS file: /scr/pima/bg219h_uvs/J1429+6316_X_uva.fits ! AN table 1: 60 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.891852 visibilities/baseline/integration-bin. ! Found source: J1429+6316 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 28896 visibilities. select rr, 1,2,3,4,6,7,8 ! Selecting polarization: RR, channels: 1..4 6..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: (none) ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: (none) ! Reading IF 10 channels: (none) ! Reading IF 11 channels: (none) ! Reading IF 12 channels: (none) print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219h_uvs/J1429+6316_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=1.006835Jy sigma=25.595178 ! Fit after self-cal, rms=0.888154Jy sigma=22.567305 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8087 mas, bmaj=0.9566 mas, bpa=87.69 degrees ! Estimated noise=0.48616 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.086985 Jy ! Component: 100 - total flux cleaned = 0.106046 Jy ! Total flux subtracted in 100 components = 0.106046 Jy ! Clean residual min=-0.003847 max=0.005912 Jy/beam ! Clean residual mean=0.000023 rms=0.000934 Jy/beam ! Combined flux in latest and established models = 0.106046 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.106046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.060032Jy sigma=1.419044 ! Fit after self-cal, rms=0.059965Jy sigma=1.417612 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00618061 Jy ! Component: 100 - total flux cleaned = 0.00927486 Jy ! Total flux subtracted in 100 components = 0.00927486 Jy ! Clean residual min=-0.003693 max=0.003513 Jy/beam ! Clean residual mean=0.000018 rms=0.000825 Jy/beam ! Combined flux in latest and established models = 0.115321 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 9 components and 0.115321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.059257Jy sigma=1.396894 ! Fit after self-cal, rms=0.059252Jy sigma=1.396460 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.059 mas, bmaj=1.22 mas, bpa=-89.35 degrees ! Estimated noise=0.229447 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, -2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00307573 Jy ! Component: 100 - total flux cleaned = 0.00494781 Jy ! Component: 150 - total flux cleaned = 0.00620476 Jy ! Component: 200 - total flux cleaned = 0.00665506 Jy ! Total flux subtracted in 200 components = 0.00665506 Jy ! Clean residual min=-0.001671 max=0.001551 Jy/beam ! Clean residual mean=0.000007 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.121976 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 21 components and 0.121976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.059079Jy sigma=1.391669 ! Fit after self-cal, rms=0.059066Jy sigma=1.391358 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.059 x 1.22 at -89.35 degrees (North through East) ! Clean map min=-0.0016305 max=0.11359 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.03 HN 0.99 KP 0.98 ! LA 0.98 MK 0.98 NL 1.02 OV 1.05 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 HN 0.99 KP 0.98 ! LA 1.00 MK 1.06 NL 1.02 OV 1.02 ! PT 1.00 SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.00 KP 1.02 ! LA 0.99 MK 0.99 NL 0.97 OV 1.02 ! PT 0.98 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 1.02 KP 1.01 ! LA 0.99 MK 0.99 NL 0.99 OV 0.99 ! PT 1.00 SC 0.95 ! ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 1.01 KP 0.99 ! LA 1.01 MK 1.03 NL 1.00 OV 1.01 ! PT 0.97 SC 0.95 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 1.02 KP 0.98 ! LA 0.97 MK 1.02 NL 1.01 OV 0.99 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.06 HN 0.99 KP 0.98 ! LA 1.03 MK 0.98 NL 1.01 OV 0.98 ! PT 0.99 SC 0.96 ! ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.059066Jy sigma=1.391358 ! Fit after self-cal, rms=0.058515Jy sigma=1.388374 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.058 mas, bmaj=1.219 mas, bpa=89.83 degrees ! Estimated noise=0.22788 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0003002 Jy ! Component: 100 - total flux cleaned = 0.000389499 Jy ! Component: 150 - total flux cleaned = 0.000415671 Jy ! Component: 200 - total flux cleaned = 0.000439442 Jy ! Total flux subtracted in 200 components = 0.000439442 Jy ! Clean residual min=-0.001693 max=0.001461 Jy/beam ! Clean residual mean=0.000003 rms=0.000346 Jy/beam ! Combined flux in latest and established models = 0.122415 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 33 components and 0.122415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.058485Jy sigma=1.387764 ! Fit after self-cal, rms=0.058484Jy sigma=1.387697 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.058484Jy sigma=1.387697 ! Fit after self-cal, rms=0.059131Jy sigma=1.384280 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.061 mas, bmaj=1.215 mas, bpa=-89.5 degrees ! Estimated noise=0.228175 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000398992 Jy ! Component: 100 - total flux cleaned = -0.000444807 Jy ! Component: 150 - total flux cleaned = -0.00050141 Jy ! Component: 200 - total flux cleaned = -0.000517316 Jy ! Total flux subtracted in 200 components = -0.000517316 Jy ! Clean residual min=-0.001268 max=0.001255 Jy/beam ! Clean residual mean=-0.000001 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.121898 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 44 components and 0.121898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.059115Jy sigma=1.383920 ! Fit after self-cal, rms=0.059131Jy sigma=1.383843 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000127558 Jy ! Component: 100 - total flux cleaned = -0.000155731 Jy ! Component: 150 - total flux cleaned = -0.000180141 Jy ! Component: 200 - total flux cleaned = -0.000190846 Jy ! Total flux subtracted in 200 components = -0.000190846 Jy ! Clean residual min=-0.001270 max=0.001248 Jy/beam ! Clean residual mean=-0.000001 rms=0.000295 Jy/beam ! Combined flux in latest and established models = 0.121707 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 45 components and 0.121707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.059125Jy sigma=1.383709 ! Fit after self-cal, rms=0.059125Jy sigma=1.383699 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.059125Jy sigma=1.383699 ! Fit after self-cal, rms=0.059195Jy sigma=1.383658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.061 mas, bmaj=1.214 mas, bpa=-89.54 degrees ! Estimated noise=0.228158 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000137385 Jy ! Component: 100 - total flux cleaned = -0.000161523 Jy ! Component: 150 - total flux cleaned = -0.000183274 Jy ! Component: 200 - total flux cleaned = -0.000193384 Jy ! Total flux subtracted in 200 components = -0.000193384 Jy ! Clean residual min=-0.001298 max=0.001249 Jy/beam ! Clean residual mean=-0.000001 rms=0.000291 Jy/beam ! Combined flux in latest and established models = 0.121514 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 51 components and 0.121514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.059190Jy sigma=1.383558 ! Fit after self-cal, rms=0.059191Jy sigma=1.383549 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.51723e-05 Jy ! Component: 100 - total flux cleaned = -6.42674e-05 Jy ! Component: 150 - total flux cleaned = -7.26414e-05 Jy ! Component: 200 - total flux cleaned = -6.4654e-05 Jy ! Total flux subtracted in 200 components = -6.4654e-05 Jy ! Clean residual min=-0.001300 max=0.001245 Jy/beam ! Clean residual mean=-0.000001 rms=0.000290 Jy/beam ! Combined flux in latest and established models = 0.121449 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 57 components and 0.121449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.059188Jy sigma=1.383493 ! Fit after self-cal, rms=0.059188Jy sigma=1.383491 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.059188Jy sigma=1.383491 ! Fit after self-cal, rms=0.059202Jy sigma=1.383481 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.273 mas, bmaj=2.601 mas, bpa=76.01 degrees ! Estimated noise=0.289099 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.12112e-05 Jy ! Component: 100 - total flux cleaned = 7.14363e-05 Jy ! Component: 150 - total flux cleaned = 7.18452e-05 Jy ! Component: 200 - total flux cleaned = 8.82404e-05 Jy ! Total flux subtracted in 200 components = 8.82404e-05 Jy ! Clean residual min=-0.001444 max=0.001501 Jy/beam ! Clean residual mean=-0.000003 rms=0.000378 Jy/beam ! Combined flux in latest and established models = 0.121537 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 65 components and 0.121537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.059201Jy sigma=1.383459 ! Fit after self-cal, rms=0.059201Jy sigma=1.383444 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.07596e-05 Jy ! Component: 100 - total flux cleaned = 1.88904e-05 Jy ! Component: 150 - total flux cleaned = 3.27814e-05 Jy ! Component: 200 - total flux cleaned = 4.45125e-05 Jy ! Total flux subtracted in 200 components = 4.45125e-05 Jy ! Clean residual min=-0.001436 max=0.001484 Jy/beam ! Clean residual mean=-0.000003 rms=0.000377 Jy/beam ! Combined flux in latest and established models = 0.121582 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 70 components and 0.121582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.059201Jy sigma=1.383448 ! Fit after self-cal, rms=0.059201Jy sigma=1.383441 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.061 mas, bmaj=1.214 mas, bpa=-89.75 degrees ! Estimated noise=0.228081 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.061 x 1.214 at -89.75 degrees (North through East) ! Clean map min=-0.0013762 max=0.11304 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8102 mas, bmaj=0.9526 mas, bpa=86.74 degrees ! Estimated noise=0.483285 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0864156 Jy ! Component: 100 - total flux cleaned = 0.105615 Jy ! Component: 150 - total flux cleaned = 0.111939 Jy ! Component: 200 - total flux cleaned = 0.115441 Jy ! Total flux subtracted in 200 components = 0.115441 Jy ! Clean residual min=-0.003296 max=0.002903 Jy/beam ! Clean residual mean=0.000013 rms=0.000751 Jy/beam ! Combined flux in latest and established models = 0.115441 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.115441 Jy ! Inverting map and beam ! Estimated beam: bmin=1.061 mas, bmaj=1.214 mas, bpa=-89.75 degrees ! Estimated noise=0.228081 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00296784 Jy ! Component: 100 - total flux cleaned = 0.00443647 Jy ! Component: 150 - total flux cleaned = 0.00481282 Jy ! Component: 200 - total flux cleaned = 0.00511368 Jy ! Total flux subtracted in 200 components = 0.00511368 Jy ! Clean residual min=-0.001491 max=0.001307 Jy/beam ! Clean residual mean=-0.000000 rms=0.000312 Jy/beam ! Combined flux in latest and established models = 0.120554 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 24 components and 0.120554 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.273 mas, bmaj=2.601 mas, bpa=76.01 degrees ! Estimated noise=0.289099 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000129026 Jy ! Component: 100 - total flux cleaned = 0.000407867 Jy ! Component: 150 - total flux cleaned = 0.00059402 Jy ! Component: 200 - total flux cleaned = 0.000719745 Jy ! Total flux subtracted in 200 components = 0.000719745 Jy ! Clean residual min=-0.001573 max=0.001504 Jy/beam ! Clean residual mean=-0.000003 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.121274 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.95266e-05 Jy ! Component: 100 - total flux cleaned = 0.000169504 Jy ! Component: 150 - total flux cleaned = 0.000228107 Jy ! Component: 200 - total flux cleaned = 0.000269986 Jy ! Total flux subtracted in 200 components = 0.000269986 Jy ! Clean residual min=-0.001500 max=0.001467 Jy/beam ! Clean residual mean=-0.000003 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.121544 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 43 components and 0.121544 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.061 mas, bmaj=1.214 mas, bpa=-89.75 degrees ! Estimated noise=0.228081 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000227703 Jy ! Component: 100 - total flux cleaned = -0.000157823 Jy ! Component: 150 - total flux cleaned = -0.000117278 Jy ! Component: 200 - total flux cleaned = -7.99798e-05 Jy ! Total flux subtracted in 200 components = -7.99798e-05 Jy ! Clean residual min=-0.001320 max=0.001225 Jy/beam ! Clean residual mean=-0.000001 rms=0.000292 Jy/beam ! Combined flux in latest and established models = 0.121464 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 54 components and 0.121464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.059219Jy sigma=1.383781 ! Fit after self-cal, rms=0.059217Jy sigma=1.383745 wmodel /scr/pima/bg219h_uvs/J1429+6316_X_map.mod ! Writing 54 model components to file: /scr/pima/bg219h_uvs/J1429+6316_X_map.mod wobs /scr/pima/bg219h_uvs/J1429+6316_X_uvs.fits ! Writing UV FITS file: /scr/pima/bg219h_uvs/J1429+6316_X_uvs.fits wwins /scr/pima/bg219h_uvs/J1429+6316_X_map.win ! wwins: Wrote 2 windows to /scr/pima/bg219h_uvs/J1429+6316_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000307387 Jy ! Component: 100 - total flux cleaned = -0.000566005 Jy ! Component: 150 - total flux cleaned = -0.000833774 Jy ! Component: 200 - total flux cleaned = -0.00101219 Jy ! Component: 250 - total flux cleaned = -0.00120362 Jy ! Component: 300 - total flux cleaned = -0.00133354 Jy ! Component: 350 - total flux cleaned = -0.00153197 Jy ! Component: 400 - total flux cleaned = -0.00165526 Jy ! Component: 450 - total flux cleaned = -0.00180949 Jy ! Component: 500 - total flux cleaned = -0.00192673 Jy ! Component: 550 - total flux cleaned = -0.0019924 Jy ! Component: 600 - total flux cleaned = -0.00207317 Jy ! Component: 650 - total flux cleaned = -0.00215234 Jy ! Component: 700 - total flux cleaned = -0.00227631 Jy ! Component: 750 - total flux cleaned = -0.00232173 Jy ! Component: 800 - total flux cleaned = -0.00236674 Jy ! Component: 850 - total flux cleaned = -0.00245558 Jy ! Component: 900 - total flux cleaned = -0.00251366 Jy ! Component: 950 - total flux cleaned = -0.00255667 Jy ! Component: 1000 - total flux cleaned = -0.00262755 Jy ! Component: 1050 - total flux cleaned = -0.00268344 Jy ! Component: 1100 - total flux cleaned = -0.00282123 Jy ! Component: 1150 - total flux cleaned = -0.002862 Jy ! Component: 1200 - total flux cleaned = -0.00287557 Jy ! Component: 1250 - total flux cleaned = -0.00298183 Jy ! Component: 1300 - total flux cleaned = -0.00303413 Jy ! Component: 1350 - total flux cleaned = -0.00309925 Jy ! Component: 1400 - total flux cleaned = -0.00316349 Jy ! Component: 1450 - total flux cleaned = -0.00321472 Jy ! Component: 1500 - total flux cleaned = -0.00327751 Jy ! Component: 1550 - total flux cleaned = -0.00334 Jy ! Component: 1600 - total flux cleaned = -0.00346346 Jy ! Component: 1650 - total flux cleaned = -0.00348792 Jy ! Component: 1700 - total flux cleaned = -0.00356077 Jy ! Component: 1750 - total flux cleaned = -0.00360899 Jy ! Component: 1800 - total flux cleaned = -0.00368038 Jy ! Component: 1850 - total flux cleaned = -0.00371584 Jy ! Component: 1900 - total flux cleaned = -0.0037394 Jy ! Component: 1950 - total flux cleaned = -0.00380903 Jy ! Component: 2000 - total flux cleaned = -0.00385515 Jy ! Component: 2050 - total flux cleaned = -0.00386647 Jy ! Component: 2100 - total flux cleaned = -0.00392314 Jy ! Component: 2150 - total flux cleaned = -0.00393445 Jy ! Component: 2200 - total flux cleaned = -0.00399027 Jy ! Component: 2250 - total flux cleaned = -0.00402352 Jy ! Component: 2300 - total flux cleaned = -0.00403445 Jy ! Component: 2350 - total flux cleaned = -0.0040563 Jy ! Component: 2400 - total flux cleaned = -0.00407803 Jy ! Component: 2450 - total flux cleaned = -0.00407822 Jy ! Component: 2500 - total flux cleaned = -0.00413166 Jy ! Component: 2550 - total flux cleaned = -0.00415288 Jy ! Component: 2600 - total flux cleaned = -0.00416326 Jy ! Component: 2650 - total flux cleaned = -0.00420513 Jy ! Component: 2700 - total flux cleaned = -0.0042259 Jy ! Component: 2750 - total flux cleaned = -0.00426711 Jy ! Component: 2800 - total flux cleaned = -0.00428759 Jy ! Component: 2850 - total flux cleaned = -0.0043181 Jy ! Component: 2900 - total flux cleaned = -0.00434836 Jy ! Component: 2950 - total flux cleaned = -0.00437833 Jy ! Component: 3000 - total flux cleaned = -0.00441827 Jy ! Component: 3050 - total flux cleaned = -0.00444796 Jy ! Component: 3100 - total flux cleaned = -0.00446759 Jy ! Component: 3150 - total flux cleaned = -0.00451646 Jy ! Component: 3200 - total flux cleaned = -0.00455532 Jy ! Component: 3250 - total flux cleaned = -0.0045842 Jy ! Component: 3300 - total flux cleaned = -0.00465143 Jy ! Component: 3350 - total flux cleaned = -0.00469906 Jy ! Component: 3400 - total flux cleaned = -0.00472758 Jy ! Component: 3450 - total flux cleaned = -0.00477458 Jy ! Component: 3500 - total flux cleaned = -0.00481208 Jy ! Component: 3550 - total flux cleaned = -0.00482146 Jy ! Component: 3600 - total flux cleaned = -0.00486784 Jy ! Component: 3650 - total flux cleaned = -0.00487714 Jy ! Component: 3700 - total flux cleaned = -0.0049413 Jy ! Component: 3750 - total flux cleaned = -0.00494129 Jy ! Component: 3800 - total flux cleaned = -0.0049867 Jy ! Component: 3850 - total flux cleaned = -0.00503181 Jy ! Component: 3900 - total flux cleaned = -0.0050588 Jy ! Component: 3950 - total flux cleaned = -0.00508561 Jy ! Component: 4000 - total flux cleaned = -0.00512118 Jy ! Component: 4050 - total flux cleaned = -0.00517435 Jy ! Total flux subtracted in 4096 components = -0.00521835 Jy ! Clean residual min=-0.000589 max=0.000600 Jy/beam ! Clean residual mean=0.000000 rms=0.000142 Jy/beam ! Combined flux in latest and established models = 0.116246 Jy keep ! Adding 298 model components to the UV plane model. ! The established model now contains 352 components and 0.116246 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219h_uvs/J1429+6316_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.061 x 1.214 at -89.75 degrees (North through East) ! Clean map min=-0.0013226 max=0.11273 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1429+6316_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.112732 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000141851 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.377491 0.377491 0.754982 1.50996 3.01993 6.03986 12.0797 24.1594 48.3189 96.6377 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.112 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 794.72 quit ! Quitting program ! Log file /scr/pima/bg219h_uvs/J1429+6316_X_uvs.log closed on Thu Apr 7 12:12:52 2016