! Started logfile: /scr/pima/bg219h_uvs/J1429+6316_X_dfm.log on Thu May 19 22:29:36 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J1429+6316_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1429+6316_X_uva.fits
! AN table 1: 60 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.891852 visibilities/baseline/integration-bin.
! Found source: J1429+6316
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 28896 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1429+6316_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008647Jy  sigma=24.588570
! Fit after  self-cal, rms=0.887429Jy  sigma=21.622708
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7753 mas, bmaj=0.914 mas, bpa=-88.46 degrees
! Estimated noise=0.43658 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0871031 Jy
! Component: 100  -  total flux cleaned = 0.106207 Jy
! Total flux subtracted in 100 components = 0.106207 Jy
! Clean residual min=-0.003298 max=0.005948 Jy/beam
! Clean residual mean=0.000017 rms=0.000800 Jy/beam
! Combined flux in latest and established models = 0.106207 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.106207 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063571Jy  sigma=1.420297
! Fit after  self-cal, rms=0.063501Jy  sigma=1.418643
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00618228 Jy
! Component: 100  -  total flux cleaned = 0.00930273 Jy
! Total flux subtracted in 100 components = 0.00930273 Jy
! Clean residual min=-0.003525 max=0.003200 Jy/beam
! Clean residual mean=0.000014 rms=0.000700 Jy/beam
! Combined flux in latest and established models = 0.11551 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 10 components and 0.11551 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062738Jy  sigma=1.397309
! Fit after  self-cal, rms=0.062743Jy  sigma=1.397165
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.051 mas, bmaj=1.212 mas, bpa=-89.65 degrees
! Estimated noise=0.183312 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00249418 Jy
! Component: 100  -  total flux cleaned = 0.00322862 Jy
! Component: 150  -  total flux cleaned = 0.0033367 Jy
! Component: 200  -  total flux cleaned = 0.0033578 Jy
! Total flux subtracted in 200 components = 0.0033578 Jy
! Clean residual min=-0.001629 max=0.002747 Jy/beam
! Clean residual mean=0.000010 rms=0.000388 Jy/beam
! Combined flux in latest and established models = 0.118868 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 13 components and 0.118868 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062655Jy  sigma=1.394824
! Fit after  self-cal, rms=0.062655Jy  sigma=1.394749
! Inverting map 
! Added new window around map position (3, -2.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00235847 Jy
! Component: 100  -  total flux cleaned = 0.00348686 Jy
! Component: 150  -  total flux cleaned = 0.00382276 Jy
! Component: 200  -  total flux cleaned = 0.00399355 Jy
! Total flux subtracted in 200 components = 0.00399355 Jy
! Clean residual min=-0.001484 max=0.001424 Jy/beam
! Clean residual mean=0.000005 rms=0.000328 Jy/beam
! Combined flux in latest and established models = 0.122861 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 31 components and 0.122861 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062563Jy  sigma=1.392375
! Fit after  self-cal, rms=0.062553Jy  sigma=1.392166
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.051 x 1.212 at -89.65 degrees (North through East)
! Clean map  min=-0.001289  max=0.11459 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        0.99     KP        0.98     
!   LA        0.99     MK        0.98     NL        1.02     OV        1.05     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.00     KP        0.98     
!   LA        1.01     MK        1.06     NL        1.02     OV        1.02     
!   PT        1.00     SC        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.01     KP        1.02     
!   LA        1.00     MK        1.00     NL        0.98     OV        1.03     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        1.03     KP        1.01     
!   LA        1.00     MK        1.00     NL        1.00     OV        1.00     
!   PT        1.01     SC        0.95     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     HN        1.02     KP        0.98     
!   LA        1.02     MK        1.02     NL        1.00     OV        1.00     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        1.02     KP        0.99     
!   LA        1.02     MK        1.04     NL        1.01     OV        1.01     
!   PT        0.97     SC        0.95     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.03     KP        0.98     
!   LA        0.97     MK        1.02     NL        1.01     OV        1.00     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.07     HN        0.99     KP        0.98     
!   LA        1.03     MK        0.99     NL        1.01     OV        0.98     
!   PT        0.99     SC        0.96     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.06     HN        0.98     KP        0.99     
!   LA        0.98     MK        1.03     NL        1.00     OV        0.99     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.96     HN        1.00     KP        0.99     
!   LA        1.00     MK        1.02     NL        1.01     OV        0.99     
!   PT        0.99     SC        0.95     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.04     HN        0.96     KP        0.97     
!   LA        0.99     MK        1.00     NL        0.97     OV        0.98     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.01     HN        1.01     KP        0.99     
!   LA        1.02     MK        0.98     NL        1.00     OV        0.98     
!   PT        0.99     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.062553Jy  sigma=1.392166
! Fit after  self-cal, rms=0.062005Jy  sigma=1.389019
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.051 mas, bmaj=1.212 mas, bpa=89.44 degrees
! Estimated noise=0.182567 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000491739 Jy
! Component: 100  -  total flux cleaned = 0.00048959 Jy
! Component: 150  -  total flux cleaned = 0.000466189 Jy
! Component: 200  -  total flux cleaned = 0.000506379 Jy
! Total flux subtracted in 200 components = 0.000506379 Jy
! Clean residual min=-0.001342 max=0.001245 Jy/beam
! Clean residual mean=0.000003 rms=0.000287 Jy/beam
! Combined flux in latest and established models = 0.123368 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 40 components and 0.123368 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061983Jy  sigma=1.388601
! Fit after  self-cal, rms=0.061982Jy  sigma=1.388541
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061982Jy  sigma=1.388541
! Fit after  self-cal, rms=0.062522Jy  sigma=1.385717
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.054 mas, bmaj=1.208 mas, bpa=89.9 degrees
! Estimated noise=0.182703 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000134096 Jy
! Component: 100  -  total flux cleaned = -0.000155588 Jy
! Component: 150  -  total flux cleaned = -0.000172787 Jy
! Component: 200  -  total flux cleaned = -0.000172444 Jy
! Total flux subtracted in 200 components = -0.000172444 Jy
! Clean residual min=-0.001113 max=0.001106 Jy/beam
! Clean residual mean=0.000000 rms=0.000251 Jy/beam
! Combined flux in latest and established models = 0.123195 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 48 components and 0.123195 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062512Jy  sigma=1.385471
! Fit after  self-cal, rms=0.062525Jy  sigma=1.385404
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.01182e-05 Jy
! Component: 100  -  total flux cleaned = -0.000118424 Jy
! Component: 150  -  total flux cleaned = -0.000141571 Jy
! Component: 200  -  total flux cleaned = -0.000152681 Jy
! Total flux subtracted in 200 components = -0.000152681 Jy
! Clean residual min=-0.001100 max=0.001064 Jy/beam
! Clean residual mean=0.000001 rms=0.000248 Jy/beam
! Combined flux in latest and established models = 0.123043 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 55 components and 0.123043 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062521Jy  sigma=1.385293
! Fit after  self-cal, rms=0.062520Jy  sigma=1.385289
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062520Jy  sigma=1.385289
! Fit after  self-cal, rms=0.062602Jy  sigma=1.385259
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.053 mas, bmaj=1.208 mas, bpa=89.62 degrees
! Estimated noise=0.182779 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.53883e-05 Jy
! Component: 100  -  total flux cleaned = -4.92109e-05 Jy
! Component: 150  -  total flux cleaned = -8.02539e-05 Jy
! Component: 200  -  total flux cleaned = -9.02658e-05 Jy
! Total flux subtracted in 200 components = -9.02658e-05 Jy
! Clean residual min=-0.001097 max=0.001048 Jy/beam
! Clean residual mean=0.000001 rms=0.000245 Jy/beam
! Combined flux in latest and established models = 0.122952 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 60 components and 0.122952 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062598Jy  sigma=1.385172
! Fit after  self-cal, rms=0.062599Jy  sigma=1.385170
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.04285e-05 Jy
! Component: 100  -  total flux cleaned = -2.09735e-05 Jy
! Component: 150  -  total flux cleaned = -2.92686e-05 Jy
! Component: 200  -  total flux cleaned = -3.70789e-05 Jy
! Total flux subtracted in 200 components = -3.70789e-05 Jy
! Clean residual min=-0.001093 max=0.001045 Jy/beam
! Clean residual mean=0.000001 rms=0.000244 Jy/beam
! Combined flux in latest and established models = 0.122915 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 62 components and 0.122915 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062596Jy  sigma=1.385116
! Fit after  self-cal, rms=0.062596Jy  sigma=1.385115
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062596Jy  sigma=1.385115
! Fit after  self-cal, rms=0.062612Jy  sigma=1.385103
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.27 mas, bmaj=2.598 mas, bpa=76.14 degrees
! Estimated noise=0.231439 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000139731 Jy
! Component: 100  -  total flux cleaned = 0.00012962 Jy
! Component: 150  -  total flux cleaned = 0.000113194 Jy
! Component: 200  -  total flux cleaned = 0.000106607 Jy
! Total flux subtracted in 200 components = 0.000106607 Jy
! Clean residual min=-0.001189 max=0.001268 Jy/beam
! Clean residual mean=0.000001 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.123022 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 64 components and 0.123022 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062611Jy  sigma=1.385073
! Fit after  self-cal, rms=0.062611Jy  sigma=1.385063
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.337e-05 Jy
! Component: 100  -  total flux cleaned = 2.59434e-05 Jy
! Component: 150  -  total flux cleaned = 2.00012e-05 Jy
! Component: 200  -  total flux cleaned = 9.92724e-06 Jy
! Total flux subtracted in 200 components = 9.92724e-06 Jy
! Clean residual min=-0.001193 max=0.001263 Jy/beam
! Clean residual mean=0.000001 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.123032 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 69 components and 0.123032 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062611Jy  sigma=1.385066
! Fit after  self-cal, rms=0.062611Jy  sigma=1.385060
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.053 mas, bmaj=1.208 mas, bpa=89.31 degrees
! Estimated noise=0.182753 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.053 x 1.208 at 89.31 degrees (North through East)
! Clean map  min=-0.0011637  max=0.11426 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7771 mas, bmaj=0.9115 mas, bpa=-89.71 degrees
! Estimated noise=0.435523 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0869165 Jy
! Component: 100  -  total flux cleaned = 0.106153 Jy
! Component: 150  -  total flux cleaned = 0.11252 Jy
! Component: 200  -  total flux cleaned = 0.115701 Jy
! Total flux subtracted in 200 components = 0.115701 Jy
! Clean residual min=-0.002968 max=0.003048 Jy/beam
! Clean residual mean=0.000011 rms=0.000658 Jy/beam
! Combined flux in latest and established models = 0.115701 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.115701 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.053 mas, bmaj=1.208 mas, bpa=89.31 degrees
! Estimated noise=0.182753 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00308672 Jy
! Component: 100  -  total flux cleaned = 0.00488539 Jy
! Component: 150  -  total flux cleaned = 0.00589304 Jy
! Component: 200  -  total flux cleaned = 0.00633205 Jy
! Total flux subtracted in 200 components = 0.00633205 Jy
! Clean residual min=-0.001184 max=0.001407 Jy/beam
! Clean residual mean=0.000002 rms=0.000269 Jy/beam
! Combined flux in latest and established models = 0.122033 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 26 components and 0.122033 Jy
! Inverting map 
! Added new window around map position (0.8, -1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000918929 Jy
! Component: 100  -  total flux cleaned = 0.00106712 Jy
! Component: 150  -  total flux cleaned = 0.00106789 Jy
! Component: 200  -  total flux cleaned = 0.00109146 Jy
! Total flux subtracted in 200 components = 0.00109146 Jy
! Clean residual min=-0.001106 max=0.001079 Jy/beam
! Clean residual mean=0.000000 rms=0.000251 Jy/beam
! Combined flux in latest and established models = 0.123124 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 38 components and 0.123124 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.27 mas, bmaj=2.598 mas, bpa=76.14 degrees
! Estimated noise=0.231439 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000122395 Jy
! Component: 100  -  total flux cleaned = -0.000107251 Jy
! Component: 150  -  total flux cleaned = -9.57309e-05 Jy
! Component: 200  -  total flux cleaned = -5.83189e-05 Jy
! Total flux subtracted in 200 components = -5.83189e-05 Jy
! Clean residual min=-0.001284 max=0.001308 Jy/beam
! Clean residual mean=0.000001 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.123066 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.64012e-05 Jy
! Component: 100  -  total flux cleaned = 5.97182e-05 Jy
! Component: 150  -  total flux cleaned = 6.59225e-05 Jy
! Component: 200  -  total flux cleaned = 6.60925e-05 Jy
! Total flux subtracted in 200 components = 6.60925e-05 Jy
! Clean residual min=-0.001248 max=0.001288 Jy/beam
! Clean residual mean=0.000000 rms=0.000324 Jy/beam
! Combined flux in latest and established models = 0.123132 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 53 components and 0.123132 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.053 mas, bmaj=1.208 mas, bpa=89.31 degrees
! Estimated noise=0.182753 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.32753e-05 Jy
! Component: 100  -  total flux cleaned = 1.17688e-05 Jy
! Component: 150  -  total flux cleaned = 4.37713e-05 Jy
! Component: 200  -  total flux cleaned = 4.40012e-05 Jy
! Total flux subtracted in 200 components = 4.40012e-05 Jy
! Clean residual min=-0.001102 max=0.000994 Jy/beam
! Clean residual mean=0.000000 rms=0.000241 Jy/beam
! Combined flux in latest and established models = 0.123176 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 65 components and 0.123176 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062611Jy  sigma=1.385058
! Fit after  self-cal, rms=0.062609Jy  sigma=1.385033
wmodel /J1429+6316_X_map.mod
! wmodel: Unable to open new model file: /J1429+6316_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1429+6316_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.053 x 1.208 at 89.31 degrees (North through East)
! Clean map  min=-0.00101  max=0.11392 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1429+6316_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.113919 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000240651 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.633744 0.633744 1.26749 2.53497 5.06995 10.1399 20.2798 40.5596 81.1192
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.113 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  473.377 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1429+6316_X_dfm.log closed on Thu May 19 22:29:39 2016