! Started logfile: /scr/pima/bg219h_uvs/J1418-3509_S_dfm.log on Thu May 19 22:29:24 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219h_uvs/J1418-3509_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1418-3509_S_uva.fits
! AN table 1: 28 integrations on 36 of 36 possible baselines.
! AN table 2: 29 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.898148 visibilities/baseline/integration-bin.
! Found source: J1418-3509
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 7372 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1418-3509_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 28 telescope corrections were flagged in sub-array 1.
!  A total of 38 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 28 telescope corrections were flagged in sub-array 1.
!  A total of 38 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 28 telescope corrections were flagged in sub-array 1.
!  A total of 38 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 28 telescope corrections were flagged in sub-array 1.
!  A total of 38 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.118044Jy  sigma=17.527808
! Fit after  self-cal, rms=0.561359Jy  sigma=8.683764
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.228 mas, bmaj=5.955 mas, bpa=-7.526 degrees
! Estimated noise=1.00218 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.33447 Jy
! Component: 100  -  total flux cleaned = 0.469785 Jy
! Total flux subtracted in 100 components = 0.469785 Jy
! Clean residual min=-0.028898 max=0.066156 Jy/beam
! Clean residual mean=-0.000353 rms=0.008767 Jy/beam
! Combined flux in latest and established models = 0.469785 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.469785 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.166958Jy  sigma=2.596772
! Fit after  self-cal, rms=0.166460Jy  sigma=2.590731
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0772454 Jy
! Component: 100  -  total flux cleaned = 0.122195 Jy
! Total flux subtracted in 100 components = 0.122195 Jy
! Clean residual min=-0.016247 max=0.032310 Jy/beam
! Clean residual mean=-0.000214 rms=0.004552 Jy/beam
! Combined flux in latest and established models = 0.59198 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 10 components and 0.59198 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.118547Jy  sigma=1.746585
! Fit after  self-cal, rms=0.118368Jy  sigma=1.744241
! Inverting map 
! Added new window around map position (-4, 6.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0313173 Jy
! Component: 100  -  total flux cleaned = 0.0509494 Jy
! Total flux subtracted in 100 components = 0.0509494 Jy
! Clean residual min=-0.013817 max=0.026738 Jy/beam
! Clean residual mean=-0.000147 rms=0.003485 Jy/beam
! Combined flux in latest and established models = 0.642929 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 19 components and 0.642929 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.107691Jy  sigma=1.559946
! Fit after  self-cal, rms=0.106937Jy  sigma=1.547114
! Inverting map 
! Added new window around map position (-3, -8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0216431 Jy
! Component: 100  -  total flux cleaned = 0.0323459 Jy
! Total flux subtracted in 100 components = 0.0323459 Jy
! Clean residual min=-0.013137 max=0.016127 Jy/beam
! Clean residual mean=-0.000105 rms=0.002687 Jy/beam
! Combined flux in latest and established models = 0.675275 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 32 components and 0.675275 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102756Jy  sigma=1.476589
! Fit after  self-cal, rms=0.102105Jy  sigma=1.465000
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.661 mas, bmaj=7.183 mas, bpa=-4.981 degrees
! Estimated noise=0.618337 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00976019 Jy
! Component: 100  -  total flux cleaned = 0.0124871 Jy
! Component: 150  -  total flux cleaned = 0.0139255 Jy
! Component: 200  -  total flux cleaned = 0.0152096 Jy
! Total flux subtracted in 200 components = 0.0152096 Jy
! Clean residual min=-0.011915 max=0.015237 Jy/beam
! Clean residual mean=-0.000114 rms=0.003205 Jy/beam
! Combined flux in latest and established models = 0.690485 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 51 components and 0.690485 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099424Jy  sigma=1.431943
! Fit after  self-cal, rms=0.099225Jy  sigma=1.427443
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.661 x 7.183 at -4.981 degrees (North through East)
! Clean map  min=-0.011683  max=0.44534 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.98     FD        1.00*    KP        0.97     LA        0.97     
!   MK        0.99     NL        1.13     OV        0.96     PT        0.98     
!   SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.00*    KP        0.98     LA        1.00     
!   MK        1.01     NL        1.05     OV        0.97     PT        0.97     
!   SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.00*    KP        0.99     LA        0.98     
!   MK        1.01     NL        1.04     OV        0.99     PT        0.99     
!   SC        1.00     
! 
! 
! Fit before self-cal, rms=0.099225Jy  sigma=1.427443
! Fit after  self-cal, rms=0.098171Jy  sigma=1.407965
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.662 mas, bmaj=7.168 mas, bpa=-4.848 degrees
! Estimated noise=0.615361 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00164092 Jy
! Component: 100  -  total flux cleaned = -0.00142355 Jy
! Component: 150  -  total flux cleaned = -0.00143081 Jy
! Component: 200  -  total flux cleaned = -0.00127576 Jy
! Total flux subtracted in 200 components = -0.00127576 Jy
! Clean residual min=-0.011415 max=0.013105 Jy/beam
! Clean residual mean=-0.000066 rms=0.002674 Jy/beam
! Combined flux in latest and established models = 0.689209 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 58 components and 0.689209 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097198Jy  sigma=1.397888
! Fit after  self-cal, rms=0.097180Jy  sigma=1.396758
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097180Jy  sigma=1.396758
! Fit after  self-cal, rms=0.096672Jy  sigma=1.380203
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.662 mas, bmaj=7.159 mas, bpa=-4.73 degrees
! Estimated noise=0.616288 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.08083e-05 Jy
! Component: 100  -  total flux cleaned = -0.000339844 Jy
! Component: 150  -  total flux cleaned = -0.000339563 Jy
! Component: 200  -  total flux cleaned = -0.000451416 Jy
! Total flux subtracted in 200 components = -0.000451416 Jy
! Clean residual min=-0.010232 max=0.010867 Jy/beam
! Clean residual mean=-0.000063 rms=0.002341 Jy/beam
! Combined flux in latest and established models = 0.688758 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 72 components and 0.688758 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096324Jy  sigma=1.375558
! Fit after  self-cal, rms=0.096322Jy  sigma=1.375220
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (6.5, -23).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00939703 Jy
! Component: 100  -  total flux cleaned = 0.0100839 Jy
! Component: 150  -  total flux cleaned = 0.00955059 Jy
! Component: 200  -  total flux cleaned = 0.00923532 Jy
! Total flux subtracted in 200 components = 0.00923532 Jy
! Clean residual min=-0.009404 max=0.006979 Jy/beam
! Clean residual mean=-0.000029 rms=0.002077 Jy/beam
! Combined flux in latest and established models = 0.697993 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 99 components and 0.697993 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094855Jy  sigma=1.358535
! Fit after  self-cal, rms=0.094714Jy  sigma=1.356997
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094714Jy  sigma=1.356997
! Fit after  self-cal, rms=0.093607Jy  sigma=1.339883
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.667 mas, bmaj=7.16 mas, bpa=-4.721 degrees
! Estimated noise=0.61517 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00082473 Jy
! Component: 100  -  total flux cleaned = -0.00110602 Jy
! Component: 150  -  total flux cleaned = -0.00122081 Jy
! Component: 200  -  total flux cleaned = -0.00151555 Jy
! Total flux subtracted in 200 components = -0.00151555 Jy
! Clean residual min=-0.008695 max=0.006528 Jy/beam
! Clean residual mean=-0.000052 rms=0.001889 Jy/beam
! Combined flux in latest and established models = 0.696478 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 110 components and 0.696478 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093245Jy  sigma=1.335351
! Fit after  self-cal, rms=0.093226Jy  sigma=1.335054
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.26822e-05 Jy
! Component: 100  -  total flux cleaned = -6.83488e-05 Jy
! Component: 150  -  total flux cleaned = -0.000238552 Jy
! Component: 200  -  total flux cleaned = -0.00039435 Jy
! Total flux subtracted in 200 components = -0.00039435 Jy
! Clean residual min=-0.008395 max=0.006169 Jy/beam
! Clean residual mean=-0.000053 rms=0.001852 Jy/beam
! Combined flux in latest and established models = 0.696083 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 117 components and 0.696083 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093066Jy  sigma=1.332873
! Fit after  self-cal, rms=0.093046Jy  sigma=1.332741
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093046Jy  sigma=1.332741
! Fit after  self-cal, rms=0.092425Jy  sigma=1.306406
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.179 mas, bmaj=20.44 mas, bpa=-2.071 degrees
! Estimated noise=0.862278 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0039302 Jy
! Component: 100  -  total flux cleaned = -0.00428407 Jy
! Component: 150  -  total flux cleaned = -0.00448886 Jy
! Component: 200  -  total flux cleaned = -0.00467806 Jy
! Total flux subtracted in 200 components = -0.00467806 Jy
! Clean residual min=-0.011037 max=0.008387 Jy/beam
! Clean residual mean=-0.000148 rms=0.002684 Jy/beam
! Combined flux in latest and established models = 0.691405 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 129 components and 0.691405 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092366Jy  sigma=1.305426
! Fit after  self-cal, rms=0.092353Jy  sigma=1.305038
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.97661e-05 Jy
! Component: 100  -  total flux cleaned = -0.000107671 Jy
! Component: 150  -  total flux cleaned = -0.000184597 Jy
! Component: 200  -  total flux cleaned = -0.000184237 Jy
! Total flux subtracted in 200 components = -0.000184237 Jy
! Clean residual min=-0.010658 max=0.008351 Jy/beam
! Clean residual mean=-0.000143 rms=0.002623 Jy/beam
! Combined flux in latest and established models = 0.691221 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 135 components and 0.691221 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092299Jy  sigma=1.304617
! Fit after  self-cal, rms=0.092275Jy  sigma=1.304397
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.672 mas, bmaj=7.165 mas, bpa=-4.636 degrees
! Estimated noise=0.618053 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.672 x 7.165 at -4.636 degrees (North through East)
! Clean map  min=-0.0084081  max=0.43992 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.239 mas, bmaj=5.925 mas, bpa=-7.154 degrees
! Estimated noise=1.00322 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.33419 Jy
! Component: 100  -  total flux cleaned = 0.46919 Jy
! Component: 150  -  total flux cleaned = 0.545315 Jy
! Component: 200  -  total flux cleaned = 0.592245 Jy
! Total flux subtracted in 200 components = 0.592245 Jy
! Clean residual min=-0.013600 max=0.024767 Jy/beam
! Clean residual mean=-0.000184 rms=0.003856 Jy/beam
! Combined flux in latest and established models = 0.592245 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.592245 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.672 mas, bmaj=7.165 mas, bpa=-4.636 degrees
! Estimated noise=0.618053 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0377077 Jy
! Component: 100  -  total flux cleaned = 0.0591873 Jy
! Component: 150  -  total flux cleaned = 0.0736652 Jy
! Component: 200  -  total flux cleaned = 0.0840639 Jy
! Total flux subtracted in 200 components = 0.0840639 Jy
! Clean residual min=-0.008954 max=0.010302 Jy/beam
! Clean residual mean=-0.000088 rms=0.002083 Jy/beam
! Combined flux in latest and established models = 0.676309 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 36 components and 0.676309 Jy
! Inverting map 
! Added new window around map position (-8.5, -15.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.010746 Jy
! Component: 100  -  total flux cleaned = 0.0149156 Jy
! Component: 150  -  total flux cleaned = 0.0173905 Jy
! Component: 200  -  total flux cleaned = 0.0187494 Jy
! Total flux subtracted in 200 components = 0.0187494 Jy
! Clean residual min=-0.007457 max=0.007383 Jy/beam
! Clean residual mean=-0.000048 rms=0.001697 Jy/beam
! Combined flux in latest and established models = 0.695058 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 57 components and 0.695058 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.179 mas, bmaj=20.44 mas, bpa=-2.071 degrees
! Estimated noise=0.862278 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00159263 Jy
! Component: 100  -  total flux cleaned = -0.00119831 Jy
! Component: 150  -  total flux cleaned = -0.00119914 Jy
! Component: 200  -  total flux cleaned = -0.00129978 Jy
! Total flux subtracted in 200 components = -0.00129978 Jy
! Clean residual min=-0.010079 max=0.006953 Jy/beam
! Clean residual mean=-0.000127 rms=0.002629 Jy/beam
! Combined flux in latest and established models = 0.693759 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.21733e-05 Jy
! Component: 100  -  total flux cleaned = -9.22089e-05 Jy
! Component: 150  -  total flux cleaned = -0.000179416 Jy
! Component: 200  -  total flux cleaned = -0.000259618 Jy
! Total flux subtracted in 200 components = -0.000259618 Jy
! Clean residual min=-0.009971 max=0.006807 Jy/beam
! Clean residual mean=-0.000129 rms=0.002562 Jy/beam
! Combined flux in latest and established models = 0.693499 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 87 components and 0.693499 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.672 mas, bmaj=7.165 mas, bpa=-4.636 degrees
! Estimated noise=0.618053 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0007055 Jy
! Component: 100  -  total flux cleaned = 0.00101563 Jy
! Component: 150  -  total flux cleaned = 0.0014429 Jy
! Component: 200  -  total flux cleaned = 0.00144752 Jy
! Total flux subtracted in 200 components = 0.00144752 Jy
! Clean residual min=-0.007172 max=0.005933 Jy/beam
! Clean residual mean=-0.000049 rms=0.001528 Jy/beam
! Combined flux in latest and established models = 0.694946 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 100 components and 0.694946 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091938Jy  sigma=1.302193
! Fit after  self-cal, rms=0.091862Jy  sigma=1.301183
wmodel /J1418-3509_S_map.mod
! wmodel: Unable to open new model file: /J1418-3509_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1418-3509_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.672 x 7.165 at -4.636 degrees (North through East)
! Clean map  min=-0.0086879  max=0.4457 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1418-3509_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.445697 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00150835 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.01528 1.01528 2.03055 4.06111 8.12222 16.2444 32.4889 64.9777
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0045 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.445 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  295.485 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1418-3509_S_dfm.log closed on Thu May 19 22:29:27 2016