! Started logfile: /scr/pima/bg219h_uvs/J1407-2701_X_dfm.log on Thu May 19 22:29:04 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J1407-2701_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1407-2701_X_uva.fits
! AN table 1: 53 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.679245 visibilities/baseline/integration-bin.
! Found source: J1407-2701
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 19440 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1407-2701_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 82 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 82 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 82 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 82 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 82 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 82 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 82 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 82 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 82 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 82 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 82 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 82 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.011755Jy  sigma=21.515690
! Fit after  self-cal, rms=0.885610Jy  sigma=18.697328
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6789 mas, bmaj=1.562 mas, bpa=-4.006 degrees
! Estimated noise=0.501344 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0774641 Jy
! Component: 100  -  total flux cleaned = 0.104055 Jy
! Total flux subtracted in 100 components = 0.104055 Jy
! Clean residual min=-0.006835 max=0.016322 Jy/beam
! Clean residual mean=0.000002 rms=0.001929 Jy/beam
! Combined flux in latest and established models = 0.104054 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.104054 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.092731Jy  sigma=1.832833
! Fit after  self-cal, rms=0.092347Jy  sigma=1.826491
! Inverting map 
! Added new window around map position (2.2, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0177163 Jy
! Component: 100  -  total flux cleaned = 0.0294966 Jy
! Total flux subtracted in 100 components = 0.0294966 Jy
! Clean residual min=-0.005360 max=0.008236 Jy/beam
! Clean residual mean=0.000003 rms=0.001475 Jy/beam
! Combined flux in latest and established models = 0.133551 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 25 components and 0.133551 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085481Jy  sigma=1.645918
! Fit after  self-cal, rms=0.085307Jy  sigma=1.642361
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8722 mas, bmaj=2.017 mas, bpa=-6.692 degrees
! Estimated noise=0.257377 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1, -0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0223612 Jy
! Component: 100  -  total flux cleaned = 0.0364553 Jy
! Component: 150  -  total flux cleaned = 0.0459002 Jy
! Component: 200  -  total flux cleaned = 0.0523859 Jy
! Total flux subtracted in 200 components = 0.0523859 Jy
! Clean residual min=-0.006257 max=0.012573 Jy/beam
! Clean residual mean=0.000007 rms=0.001974 Jy/beam
! Combined flux in latest and established models = 0.185937 Jy
! Performing phase self-cal
! Adding 67 model components to the UV plane model.
! The established model now contains 79 components and 0.185937 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079118Jy  sigma=1.471042
! Fit after  self-cal, rms=0.078780Jy  sigma=1.462709
! Inverting map 
! Added new window around map position (7.4, -0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0119894 Jy
! Component: 100  -  total flux cleaned = 0.0192315 Jy
! Component: 150  -  total flux cleaned = 0.0247933 Jy
! Component: 200  -  total flux cleaned = 0.029259 Jy
! Total flux subtracted in 200 components = 0.029259 Jy
! Clean residual min=-0.003976 max=0.005284 Jy/beam
! Clean residual mean=0.000004 rms=0.001220 Jy/beam
! Combined flux in latest and established models = 0.215196 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 119 components and 0.215196 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076713Jy  sigma=1.407840
! Fit after  self-cal, rms=0.076471Jy  sigma=1.401651
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8722 x 2.017 at -6.692 degrees (North through East)
! Clean map  min=-0.0037975  max=0.11074 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.98     HN        1.08     KP        0.99     
!   LA        0.98     MK        1.03     NL        1.02     OV        0.97     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.95     HN        1.11     KP        0.98     
!   LA        0.99     MK        1.09     NL        1.00     OV        0.96     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        1.14     KP        0.99     
!   LA        0.96     MK        1.04     NL        1.02     OV        0.97     
!   PT        0.94     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.97     HN        1.04     KP        1.01     
!   LA        0.98     MK        1.07     NL        1.08     OV        0.95     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.95     HN        1.09     KP        1.00     
!   LA        1.01     MK        0.97     NL        1.05     OV        0.94     
!   PT        0.99     SC        0.94     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.19     KP        1.00     
!   LA        0.99     MK        1.09     NL        1.01     OV        0.97     
!   PT        0.95     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.04     HN        1.10     KP        1.03     
!   LA        0.93     MK        0.90     NL        1.09     OV        0.95     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.94     HN        1.08     KP        1.01     
!   LA        0.97     MK        1.03     NL        1.06     OV        0.94     
!   PT        0.98     SC        0.96     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.98     HN        1.07     KP        0.93     
!   LA        1.00     MK        1.09     NL        1.04     OV        0.96     
!   PT        1.00     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.076471Jy  sigma=1.401651
! Fit after  self-cal, rms=0.077513Jy  sigma=1.393091
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8798 mas, bmaj=2.023 mas, bpa=-6.198 degrees
! Estimated noise=0.254374 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00461266 Jy
! Component: 100  -  total flux cleaned = 0.0073493 Jy
! Component: 150  -  total flux cleaned = 0.00877731 Jy
! Component: 200  -  total flux cleaned = 0.00991966 Jy
! Total flux subtracted in 200 components = 0.00991966 Jy
! Clean residual min=-0.002770 max=0.003608 Jy/beam
! Clean residual mean=0.000004 rms=0.000808 Jy/beam
! Combined flux in latest and established models = 0.225116 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 152 components and 0.225116 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077188Jy  sigma=1.384436
! Fit after  self-cal, rms=0.077192Jy  sigma=1.383251
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077192Jy  sigma=1.383251
! Fit after  self-cal, rms=0.077448Jy  sigma=1.381029
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8775 mas, bmaj=2.017 mas, bpa=-6.277 degrees
! Estimated noise=0.253373 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00204278 Jy
! Component: 100  -  total flux cleaned = 0.00329018 Jy
! Component: 150  -  total flux cleaned = 0.00395209 Jy
! Component: 200  -  total flux cleaned = 0.00447075 Jy
! Total flux subtracted in 200 components = 0.00447075 Jy
! Clean residual min=-0.002128 max=0.002679 Jy/beam
! Clean residual mean=0.000003 rms=0.000638 Jy/beam
! Combined flux in latest and established models = 0.229586 Jy
selfcal
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 180 components and 0.229586 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077368Jy  sigma=1.379156
! Fit after  self-cal, rms=0.077369Jy  sigma=1.378690
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5, 0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00242312 Jy
! Component: 100  -  total flux cleaned = 0.00359123 Jy
! Component: 150  -  total flux cleaned = 0.00426904 Jy
! Component: 200  -  total flux cleaned = 0.00469371 Jy
! Total flux subtracted in 200 components = 0.00469371 Jy
! Clean residual min=-0.002013 max=0.002274 Jy/beam
! Clean residual mean=0.000002 rms=0.000580 Jy/beam
! Combined flux in latest and established models = 0.23428 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 202 components and 0.23428 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077276Jy  sigma=1.376657
! Fit after  self-cal, rms=0.077260Jy  sigma=1.376415
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077260Jy  sigma=1.376415
! Fit after  self-cal, rms=0.077019Jy  sigma=1.376265
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8759 mas, bmaj=2.011 mas, bpa=-6.203 degrees
! Estimated noise=0.252935 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0012524 Jy
! Component: 100  -  total flux cleaned = 0.00192788 Jy
! Component: 150  -  total flux cleaned = 0.00246042 Jy
! Component: 200  -  total flux cleaned = 0.00283863 Jy
! Total flux subtracted in 200 components = 0.00283863 Jy
! Clean residual min=-0.002105 max=0.002268 Jy/beam
! Clean residual mean=0.000002 rms=0.000568 Jy/beam
! Combined flux in latest and established models = 0.237119 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 217 components and 0.237119 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076982Jy  sigma=1.375646
! Fit after  self-cal, rms=0.076972Jy  sigma=1.375562
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000437187 Jy
! Component: 100  -  total flux cleaned = 0.000725768 Jy
! Component: 150  -  total flux cleaned = 0.000917121 Jy
! Component: 200  -  total flux cleaned = 0.00108964 Jy
! Total flux subtracted in 200 components = 0.00108964 Jy
! Clean residual min=-0.002072 max=0.002219 Jy/beam
! Clean residual mean=0.000002 rms=0.000561 Jy/beam
! Combined flux in latest and established models = 0.238209 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 230 components and 0.238209 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076952Jy  sigma=1.375362
! Fit after  self-cal, rms=0.076951Jy  sigma=1.375329
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076951Jy  sigma=1.375329
! Fit after  self-cal, rms=0.076586Jy  sigma=1.375391
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.268 mas, bmaj=5.224 mas, bpa=1.043 degrees
! Estimated noise=0.323634 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00135906 Jy
! Component: 100  -  total flux cleaned = 0.00222182 Jy
! Component: 150  -  total flux cleaned = 0.0026168 Jy
! Component: 200  -  total flux cleaned = 0.00279439 Jy
! Total flux subtracted in 200 components = 0.00279439 Jy
! Clean residual min=-0.003098 max=0.003540 Jy/beam
! Clean residual mean=0.000004 rms=0.000939 Jy/beam
! Combined flux in latest and established models = 0.241003 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 248 components and 0.241003 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076574Jy  sigma=1.375323
! Fit after  self-cal, rms=0.076572Jy  sigma=1.375277
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00034997 Jy
! Component: 100  -  total flux cleaned = 0.000389767 Jy
! Component: 150  -  total flux cleaned = 0.000427205 Jy
! Component: 200  -  total flux cleaned = 0.000445292 Jy
! Total flux subtracted in 200 components = 0.000445292 Jy
! Clean residual min=-0.003060 max=0.003502 Jy/beam
! Clean residual mean=0.000004 rms=0.000927 Jy/beam
! Combined flux in latest and established models = 0.241448 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 251 components and 0.241448 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076568Jy  sigma=1.375221
! Fit after  self-cal, rms=0.076568Jy  sigma=1.375213
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8752 mas, bmaj=2.009 mas, bpa=-6.123 degrees
! Estimated noise=0.252869 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8752 x 2.009 at -6.123 degrees (North through East)
! Clean map  min=-0.0019343  max=0.1084 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6802 mas, bmaj=1.558 mas, bpa=-3.36 degrees
! Estimated noise=0.494379 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.075805 Jy
! Component: 100  -  total flux cleaned = 0.103261 Jy
! Component: 150  -  total flux cleaned = 0.121495 Jy
! Component: 200  -  total flux cleaned = 0.134915 Jy
! Total flux subtracted in 200 components = 0.134915 Jy
! Clean residual min=-0.005265 max=0.007950 Jy/beam
! Clean residual mean=0.000003 rms=0.001436 Jy/beam
! Combined flux in latest and established models = 0.134915 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 0.134915 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8752 mas, bmaj=2.009 mas, bpa=-6.123 degrees
! Estimated noise=0.252869 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0226297 Jy
! Component: 100  -  total flux cleaned = 0.0378549 Jy
! Component: 150  -  total flux cleaned = 0.0494561 Jy
! Component: 200  -  total flux cleaned = 0.0586203 Jy
! Total flux subtracted in 200 components = 0.0586203 Jy
! Clean residual min=-0.004456 max=0.005473 Jy/beam
! Clean residual mean=0.000003 rms=0.001454 Jy/beam
! Combined flux in latest and established models = 0.193535 Jy
! Adding 74 model components to the UV plane model.
! The established model now contains 90 components and 0.193535 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.268 mas, bmaj=5.224 mas, bpa=1.043 degrees
! Estimated noise=0.323634 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.013582 Jy
! Component: 100  -  total flux cleaned = 0.0228453 Jy
! Component: 150  -  total flux cleaned = 0.0294382 Jy
! Component: 200  -  total flux cleaned = 0.0341914 Jy
! Total flux subtracted in 200 components = 0.0341914 Jy
! Clean residual min=-0.003910 max=0.004034 Jy/beam
! Clean residual mean=0.000004 rms=0.001211 Jy/beam
! Combined flux in latest and established models = 0.227726 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00346357 Jy
! Component: 100  -  total flux cleaned = 0.00602274 Jy
! Component: 150  -  total flux cleaned = 0.00795048 Jy
! Component: 200  -  total flux cleaned = 0.0094118 Jy
! Total flux subtracted in 200 components = 0.0094118 Jy
! Clean residual min=-0.003225 max=0.003417 Jy/beam
! Clean residual mean=0.000004 rms=0.000945 Jy/beam
! Combined flux in latest and established models = 0.237138 Jy
! Adding 94 model components to the UV plane model.
! The established model now contains 166 components and 0.237138 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8752 mas, bmaj=2.009 mas, bpa=-6.123 degrees
! Estimated noise=0.252869 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000252051 Jy
! Component: 100  -  total flux cleaned = 0.000242263 Jy
! Component: 150  -  total flux cleaned = 0.000506041 Jy
! Component: 200  -  total flux cleaned = 0.000676325 Jy
! Total flux subtracted in 200 components = 0.000676325 Jy
! Clean residual min=-0.002248 max=0.002490 Jy/beam
! Clean residual mean=0.000002 rms=0.000578 Jy/beam
! Combined flux in latest and established models = 0.237814 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 179 components and 0.237814 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076690Jy  sigma=1.377815
! Fit after  self-cal, rms=0.076657Jy  sigma=1.376916
wmodel /J1407-2701_X_map.mod
! wmodel: Unable to open new model file: /J1407-2701_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1407-2701_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8752 x 2.009 at -6.123 degrees (North through East)
! Clean map  min=-0.0020874  max=0.10968 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1407-2701_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.109681 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000563938 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.54249 1.54249 3.08498 6.16995 12.3399 24.6798 49.3596 98.7192
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0016 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.109 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  194.491 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1407-2701_X_dfm.log closed on Thu May 19 22:29:07 2016