! Started logfile: /scr/pima/bg219h_uvs/J1405-1440_X_dfm.log on Thu May 19 22:28:56 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J1405-1440_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1405-1440_X_uva.fits
! AN table 1: 41 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.933333 visibilities/baseline/integration-bin.
! Found source: J1405-1440
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 20664 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1405-1440_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.016491Jy  sigma=23.393511
! Fit after  self-cal, rms=0.854618Jy  sigma=19.543727
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6668 mas, bmaj=1.63 mas, bpa=-2.838 degrees
! Estimated noise=0.417508 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.107503 Jy
! Component: 100  -  total flux cleaned = 0.13864 Jy
! Total flux subtracted in 100 components = 0.13864 Jy
! Clean residual min=-0.005156 max=0.013739 Jy/beam
! Clean residual mean=0.000016 rms=0.001422 Jy/beam
! Combined flux in latest and established models = 0.13864 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.13864 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074069Jy  sigma=1.542157
! Fit after  self-cal, rms=0.073773Jy  sigma=1.537156
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0155097 Jy
! Component: 100  -  total flux cleaned = 0.0238906 Jy
! Total flux subtracted in 100 components = 0.0238906 Jy
! Clean residual min=-0.003853 max=0.005705 Jy/beam
! Clean residual mean=0.000005 rms=0.000927 Jy/beam
! Combined flux in latest and established models = 0.162531 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 15 components and 0.162531 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069583Jy  sigma=1.410447
! Fit after  self-cal, rms=0.069512Jy  sigma=1.408832
! Inverting map 
! Added new window around map position (-0.4, 1.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00590524 Jy
! Component: 100  -  total flux cleaned = 0.00952636 Jy
! Total flux subtracted in 100 components = 0.00952636 Jy
! Clean residual min=-0.003541 max=0.004126 Jy/beam
! Clean residual mean=0.000000 rms=0.000814 Jy/beam
! Combined flux in latest and established models = 0.172057 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 25 components and 0.172057 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068885Jy  sigma=1.388445
! Fit after  self-cal, rms=0.068845Jy  sigma=1.387642
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8733 mas, bmaj=2.071 mas, bpa=-2.983 degrees
! Estimated noise=0.221944 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00386925 Jy
! Component: 100  -  total flux cleaned = 0.00579325 Jy
! Component: 150  -  total flux cleaned = 0.0065846 Jy
! Component: 200  -  total flux cleaned = 0.00691148 Jy
! Total flux subtracted in 200 components = 0.00691148 Jy
! Clean residual min=-0.001903 max=0.002348 Jy/beam
! Clean residual mean=0.000002 rms=0.000509 Jy/beam
! Combined flux in latest and established models = 0.178968 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 38 components and 0.178968 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068673Jy  sigma=1.381450
! Fit after  self-cal, rms=0.068658Jy  sigma=1.381125
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8733 x 2.071 at -2.983 degrees (North through East)
! Clean map  min=-0.0017704  max=0.14307 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.03     KP        0.98     
!   LA        1.01     MK        1.02     NL        0.97     OV        0.98     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        1.01     KP        0.99     
!   LA        1.02     MK        1.02     NL        1.00     OV        0.99     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.02     KP        0.98     
!   LA        1.02     MK        1.03     NL        0.96     OV        0.99     
!   PT        0.99     SC        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.00     KP        0.97     
!   LA        1.02     MK        1.03     NL        0.98     OV        0.99     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        1.05     KP        0.97     
!   LA        1.05     MK        1.00     NL        0.99     OV        1.00     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.00     KP        0.97     
!   LA        1.03     MK        1.05     NL        1.00     OV        1.00     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.01     KP        0.97     
!   LA        0.99     MK        1.02     NL        0.99     OV        1.00     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.01     KP        0.96     
!   LA        1.05     MK        1.04     NL        0.98     OV        1.01     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        0.99     KP        0.99     
!   LA        1.01     MK        0.98     NL        0.98     OV        1.00     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.04     HN        0.99     KP        0.99     
!   LA        1.03     MK        1.00     NL        0.96     OV        0.99     
!   PT        1.00     SC        0.95     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.01     HN        0.95     KP        0.97     
!   LA        1.03     MK        1.01     NL        0.98     OV        0.99     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.00     KP        0.95     
!   LA        1.03     MK        1.04     NL        0.98     OV        0.99     
!   PT        0.99     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.068658Jy  sigma=1.381125
! Fit after  self-cal, rms=0.068293Jy  sigma=1.377037
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8766 mas, bmaj=2.07 mas, bpa=-2.674 degrees
! Estimated noise=0.220828 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000727423 Jy
! Component: 100  -  total flux cleaned = -0.000797379 Jy
! Component: 150  -  total flux cleaned = -0.000874837 Jy
! Component: 200  -  total flux cleaned = -0.000896062 Jy
! Total flux subtracted in 200 components = -0.000896062 Jy
! Clean residual min=-0.001866 max=0.002213 Jy/beam
! Clean residual mean=0.000002 rms=0.000448 Jy/beam
! Combined flux in latest and established models = 0.178072 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 46 components and 0.178072 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068253Jy  sigma=1.376464
! Fit after  self-cal, rms=0.068245Jy  sigma=1.376367
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068245Jy  sigma=1.376367
! Fit after  self-cal, rms=0.069559Jy  sigma=1.370614
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8767 mas, bmaj=2.071 mas, bpa=-2.771 degrees
! Estimated noise=0.220409 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000506797 Jy
! Component: 100  -  total flux cleaned = 0.000578303 Jy
! Component: 150  -  total flux cleaned = 0.000563277 Jy
! Component: 200  -  total flux cleaned = 0.000536198 Jy
! Total flux subtracted in 200 components = 0.000536198 Jy
! Clean residual min=-0.001292 max=0.001494 Jy/beam
! Clean residual mean=0.000002 rms=0.000339 Jy/beam
! Combined flux in latest and established models = 0.178609 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 55 components and 0.178609 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069542Jy  sigma=1.370294
! Fit after  self-cal, rms=0.069562Jy  sigma=1.370175
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-16.6, 49).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00082614 Jy
! Component: 100  -  total flux cleaned = 0.000981468 Jy
! Component: 150  -  total flux cleaned = 0.00108621 Jy
! Component: 200  -  total flux cleaned = 0.00115578 Jy
! Total flux subtracted in 200 components = 0.00115578 Jy
! Clean residual min=-0.001250 max=0.001372 Jy/beam
! Clean residual mean=0.000002 rms=0.000332 Jy/beam
! Combined flux in latest and established models = 0.179764 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 66 components and 0.179764 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069522Jy  sigma=1.369511
! Fit after  self-cal, rms=0.069520Jy  sigma=1.369468
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069520Jy  sigma=1.369468
! Fit after  self-cal, rms=0.070385Jy  sigma=1.371672
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8762 mas, bmaj=2.069 mas, bpa=-2.734 degrees
! Estimated noise=0.221402 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000644892 Jy
! Component: 100  -  total flux cleaned = 0.000817381 Jy
! Component: 150  -  total flux cleaned = 0.000902521 Jy
! Component: 200  -  total flux cleaned = 0.000940559 Jy
! Total flux subtracted in 200 components = 0.000940559 Jy
! Clean residual min=-0.001310 max=0.001486 Jy/beam
! Clean residual mean=0.000002 rms=0.000332 Jy/beam
! Combined flux in latest and established models = 0.180705 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 72 components and 0.180705 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070367Jy  sigma=1.371344
! Fit after  self-cal, rms=0.070380Jy  sigma=1.371290
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (31.8, 37.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00127577 Jy
! Component: 100  -  total flux cleaned = 0.00172689 Jy
! Component: 150  -  total flux cleaned = 0.00187555 Jy
! Component: 200  -  total flux cleaned = 0.00197166 Jy
! Total flux subtracted in 200 components = 0.00197166 Jy
! Clean residual min=-0.001305 max=0.001279 Jy/beam
! Clean residual mean=0.000001 rms=0.000317 Jy/beam
! Combined flux in latest and established models = 0.182677 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 90 components and 0.182677 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070352Jy  sigma=1.370647
! Fit after  self-cal, rms=0.070352Jy  sigma=1.370595
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070352Jy  sigma=1.370595
! Fit after  self-cal, rms=0.070394Jy  sigma=1.368806
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.197 mas, bmaj=4.075 mas, bpa=2.627 degrees
! Estimated noise=0.277058 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000708265 Jy
! Component: 100  -  total flux cleaned = 0.000851265 Jy
! Component: 150  -  total flux cleaned = 0.000978516 Jy
! Component: 200  -  total flux cleaned = 0.00105118 Jy
! Total flux subtracted in 200 components = 0.00105118 Jy
! Clean residual min=-0.001164 max=0.001396 Jy/beam
! Clean residual mean=0.000002 rms=0.000356 Jy/beam
! Combined flux in latest and established models = 0.183728 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 96 components and 0.183728 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070388Jy  sigma=1.368704
! Fit after  self-cal, rms=0.070387Jy  sigma=1.368661
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.41113e-05 Jy
! Component: 100  -  total flux cleaned = 2.31433e-05 Jy
! Component: 150  -  total flux cleaned = 3.37094e-05 Jy
! Component: 200  -  total flux cleaned = 2.35337e-05 Jy
! Total flux subtracted in 200 components = 2.35337e-05 Jy
! Clean residual min=-0.001148 max=0.001383 Jy/beam
! Clean residual mean=0.000002 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.183751 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 101 components and 0.183751 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070386Jy  sigma=1.368637
! Fit after  self-cal, rms=0.070383Jy  sigma=1.368613
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8759 mas, bmaj=2.067 mas, bpa=-2.686 degrees
! Estimated noise=0.221238 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8759 x 2.067 at -2.686 degrees (North through East)
! Clean map  min=-0.0011126  max=0.14227 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6691 mas, bmaj=1.627 mas, bpa=-2.479 degrees
! Estimated noise=0.416347 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.106956 Jy
! Component: 100  -  total flux cleaned = 0.139904 Jy
! Component: 150  -  total flux cleaned = 0.155481 Jy
! Component: 200  -  total flux cleaned = 0.163695 Jy
! Total flux subtracted in 200 components = 0.163695 Jy
! Clean residual min=-0.003102 max=0.004005 Jy/beam
! Clean residual mean=0.000004 rms=0.000796 Jy/beam
! Combined flux in latest and established models = 0.163695 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.163695 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8759 mas, bmaj=2.067 mas, bpa=-2.686 degrees
! Estimated noise=0.221238 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0075309 Jy
! Component: 100  -  total flux cleaned = 0.0112732 Jy
! Component: 150  -  total flux cleaned = 0.0135428 Jy
! Component: 200  -  total flux cleaned = 0.0151934 Jy
! Total flux subtracted in 200 components = 0.0151934 Jy
! Clean residual min=-0.001265 max=0.001581 Jy/beam
! Clean residual mean=0.000004 rms=0.000339 Jy/beam
! Combined flux in latest and established models = 0.178888 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 46 components and 0.178888 Jy
! Inverting map 
! Added new window around map position (7.8, -9.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00134898 Jy
! Component: 100  -  total flux cleaned = 0.00210723 Jy
! Component: 150  -  total flux cleaned = 0.00271247 Jy
! Component: 200  -  total flux cleaned = 0.00320815 Jy
! Total flux subtracted in 200 components = 0.00320815 Jy
! Clean residual min=-0.001190 max=0.001231 Jy/beam
! Clean residual mean=0.000003 rms=0.000307 Jy/beam
! Combined flux in latest and established models = 0.182096 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 65 components and 0.182096 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.197 mas, bmaj=4.075 mas, bpa=2.627 degrees
! Estimated noise=0.277058 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000903344 Jy
! Component: 100  -  total flux cleaned = 0.00140743 Jy
! Component: 150  -  total flux cleaned = 0.00155119 Jy
! Component: 200  -  total flux cleaned = 0.00169453 Jy
! Total flux subtracted in 200 components = 0.00169453 Jy
! Clean residual min=-0.001243 max=0.001453 Jy/beam
! Clean residual mean=0.000002 rms=0.000339 Jy/beam
! Combined flux in latest and established models = 0.183791 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (45.6, -21.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000933727 Jy
! Component: 100  -  total flux cleaned = 0.000929787 Jy
! Component: 150  -  total flux cleaned = 0.0010348 Jy
! Component: 200  -  total flux cleaned = 0.00112733 Jy
! Total flux subtracted in 200 components = 0.00112733 Jy
! Clean residual min=-0.001088 max=0.001037 Jy/beam
! Clean residual mean=0.000003 rms=0.000300 Jy/beam
! Combined flux in latest and established models = 0.184918 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 98 components and 0.184918 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8759 mas, bmaj=2.067 mas, bpa=-2.686 degrees
! Estimated noise=0.221238 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.37159e-06 Jy
! Component: 100  -  total flux cleaned = 0.000160529 Jy
! Component: 150  -  total flux cleaned = 0.000237127 Jy
! Component: 200  -  total flux cleaned = 0.000309701 Jy
! Total flux subtracted in 200 components = 0.000309701 Jy
! Clean residual min=-0.001113 max=0.001133 Jy/beam
! Clean residual mean=0.000001 rms=0.000276 Jy/beam
! Combined flux in latest and established models = 0.185228 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 121 components and 0.185228 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070363Jy  sigma=1.367884
! Fit after  self-cal, rms=0.070352Jy  sigma=1.367723
wmodel /J1405-1440_X_map.mod
! wmodel: Unable to open new model file: /J1405-1440_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1405-1440_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8759 x 2.067 at -2.686 degrees (North through East)
! Clean map  min=-0.00099327  max=0.14221 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1405-1440_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.142211 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000275517 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.581214 0.581214 1.16243 2.32486 4.64971 9.29943 18.5989 37.1977 74.3954
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.142 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  516.16 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1405-1440_X_dfm.log closed on Thu May 19 22:28:59 2016