! Started logfile: /scr/pima/bg219h_uvs/J1402-2822_X_dfm.log on Thu May 19 22:28:48 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J1402-2822_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1402-2822_X_uva.fits
! AN table 1: 41 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.875339 visibilities/baseline/integration-bin.
! Found source: J1402-2822
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 19380 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1402-2822_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.013726Jy  sigma=20.894404
! Fit after  self-cal, rms=0.877449Jy  sigma=17.950107
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6333 mas, bmaj=1.587 mas, bpa=-5.239 degrees
! Estimated noise=0.535753 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0905447 Jy
! Component: 100  -  total flux cleaned = 0.113941 Jy
! Total flux subtracted in 100 components = 0.113941 Jy
! Clean residual min=-0.006732 max=0.017059 Jy/beam
! Clean residual mean=0.000010 rms=0.001703 Jy/beam
! Combined flux in latest and established models = 0.113941 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.113941 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.089057Jy  sigma=1.632610
! Fit after  self-cal, rms=0.088851Jy  sigma=1.630125
! Inverting map 
! Added new window around map position (0.8, -0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0164013 Jy
! Component: 100  -  total flux cleaned = 0.0259493 Jy
! Total flux subtracted in 100 components = 0.0259493 Jy
! Clean residual min=-0.005318 max=0.007873 Jy/beam
! Clean residual mean=0.000006 rms=0.001284 Jy/beam
! Combined flux in latest and established models = 0.13989 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 11 components and 0.13989 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083922Jy  sigma=1.492959
! Fit after  self-cal, rms=0.083722Jy  sigma=1.489171
! Inverting map 
! Added new window around map position (1.4, 1.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00823863 Jy
! Component: 100  -  total flux cleaned = 0.013822 Jy
! Total flux subtracted in 100 components = 0.013822 Jy
! Clean residual min=-0.004695 max=0.006985 Jy/beam
! Clean residual mean=0.000004 rms=0.001132 Jy/beam
! Combined flux in latest and established models = 0.153712 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 27 components and 0.153712 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082033Jy  sigma=1.443821
! Fit after  self-cal, rms=0.081939Jy  sigma=1.441922
! Inverting map 
! Added new window around map position (2.6, 0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00687636 Jy
! Component: 100  -  total flux cleaned = 0.0114016 Jy
! Total flux subtracted in 100 components = 0.0114016 Jy
! Clean residual min=-0.004189 max=0.005121 Jy/beam
! Clean residual mean=0.000003 rms=0.000996 Jy/beam
! Combined flux in latest and established models = 0.165114 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 39 components and 0.165114 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080889Jy  sigma=1.414015
! Fit after  self-cal, rms=0.080847Jy  sigma=1.412744
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8135 mas, bmaj=2.014 mas, bpa=-4.543 degrees
! Estimated noise=0.258404 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00863042 Jy
! Component: 100  -  total flux cleaned = 0.0143142 Jy
! Component: 150  -  total flux cleaned = 0.0183451 Jy
! Component: 200  -  total flux cleaned = 0.0212375 Jy
! Total flux subtracted in 200 components = 0.0212375 Jy
! Clean residual min=-0.003899 max=0.004376 Jy/beam
! Clean residual mean=-0.000003 rms=0.000849 Jy/beam
! Combined flux in latest and established models = 0.186351 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 72 components and 0.186351 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079844Jy  sigma=1.384679
! Fit after  self-cal, rms=0.079796Jy  sigma=1.382889
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8135 x 2.014 at -4.543 degrees (North through East)
! Clean map  min=-0.0037606  max=0.12344 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        1.15     KP        0.94     
!   LA        1.02     MK        1.01     NL        1.02     OV        1.02     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00     HN        1.10     KP        0.97     
!   LA        0.99     MK        1.01     NL        0.96     OV        0.98     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.96     HN        1.06     KP        0.98     
!   LA        1.01     MK        1.04     NL        0.98     OV        1.01     
!   PT        1.00     SC        0.90     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.98     HN        1.15     KP        0.96     
!   LA        1.04     MK        1.02     NL        1.02     OV        0.99     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.96     HN        1.12     KP        0.98     
!   LA        1.04     MK        1.01     NL        1.03     OV        0.99     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.97     HN        1.07     KP        0.96     
!   LA        1.03     MK        1.01     NL        0.99     OV        0.97     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.97     HN        1.13     KP        0.96     
!   LA        0.99     MK        1.00     NL        1.01     OV        0.99     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.02     HN        1.10     KP        0.93     
!   LA        1.03     MK        1.02     NL        0.99     OV        0.98     
!   PT        0.96     SC        1.04     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.00     HN        1.14     KP        0.97     
!   LA        1.05     MK        0.96     NL        1.00     OV        0.99     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.99     HN        1.09     KP        0.88     
!   LA        1.03     MK        1.00     NL        1.03     OV        1.02     
!   PT        0.94     SC        0.93     
! 
! 
! Fit before self-cal, rms=0.079796Jy  sigma=1.382889
! Fit after  self-cal, rms=0.081679Jy  sigma=1.375521
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8183 mas, bmaj=2.011 mas, bpa=-4.167 degrees
! Estimated noise=0.255732 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3.6, -0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00405947 Jy
! Component: 100  -  total flux cleaned = 0.00628444 Jy
! Component: 150  -  total flux cleaned = 0.00738325 Jy
! Component: 200  -  total flux cleaned = 0.00767623 Jy
! Total flux subtracted in 200 components = 0.00767623 Jy
! Clean residual min=-0.002543 max=0.002818 Jy/beam
! Clean residual mean=-0.000002 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 0.194028 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 93 components and 0.194028 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081455Jy  sigma=1.370469
! Fit after  self-cal, rms=0.081475Jy  sigma=1.369721
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081475Jy  sigma=1.369721
! Fit after  self-cal, rms=0.077587Jy  sigma=1.372914
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8171 mas, bmaj=2.018 mas, bpa=-4.291 degrees
! Estimated noise=0.251428 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.79551e-05 Jy
! Component: 100  -  total flux cleaned = 0.000475127 Jy
! Component: 150  -  total flux cleaned = 0.000923678 Jy
! Component: 200  -  total flux cleaned = 0.00105055 Jy
! Total flux subtracted in 200 components = 0.00105055 Jy
! Clean residual min=-0.003013 max=0.002960 Jy/beam
! Clean residual mean=-0.000002 rms=0.000602 Jy/beam
! Combined flux in latest and established models = 0.195078 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 117 components and 0.195078 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077415Jy  sigma=1.371646
! Fit after  self-cal, rms=0.077384Jy  sigma=1.371284
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000722625 Jy
! Component: 100  -  total flux cleaned = 0.0010468 Jy
! Component: 150  -  total flux cleaned = 0.00118827 Jy
! Component: 200  -  total flux cleaned = 0.00121975 Jy
! Total flux subtracted in 200 components = 0.00121975 Jy
! Clean residual min=-0.002862 max=0.002739 Jy/beam
! Clean residual mean=-0.000002 rms=0.000590 Jy/beam
! Combined flux in latest and established models = 0.196298 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 124 components and 0.196298 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077315Jy  sigma=1.370843
! Fit after  self-cal, rms=0.077314Jy  sigma=1.370749
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077314Jy  sigma=1.370749
! Fit after  self-cal, rms=0.076825Jy  sigma=1.370406
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8171 mas, bmaj=2.02 mas, bpa=-4.303 degrees
! Estimated noise=0.250093 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.40283e-05 Jy
! Component: 100  -  total flux cleaned = 0.000324548 Jy
! Component: 150  -  total flux cleaned = 0.000356753 Jy
! Component: 200  -  total flux cleaned = 0.000386341 Jy
! Total flux subtracted in 200 components = 0.000386341 Jy
! Clean residual min=-0.002668 max=0.002601 Jy/beam
! Clean residual mean=-0.000003 rms=0.000576 Jy/beam
! Combined flux in latest and established models = 0.196684 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 128 components and 0.196684 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076757Jy  sigma=1.370078
! Fit after  self-cal, rms=0.076755Jy  sigma=1.369997
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000363423 Jy
! Component: 100  -  total flux cleaned = 0.000480973 Jy
! Component: 150  -  total flux cleaned = 0.000508203 Jy
! Component: 200  -  total flux cleaned = 0.000508 Jy
! Total flux subtracted in 200 components = 0.000508 Jy
! Clean residual min=-0.002697 max=0.002517 Jy/beam
! Clean residual mean=-0.000003 rms=0.000573 Jy/beam
! Combined flux in latest and established models = 0.197192 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 133 components and 0.197192 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076718Jy  sigma=1.369768
! Fit after  self-cal, rms=0.076719Jy  sigma=1.369733
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076719Jy  sigma=1.369733
! Fit after  self-cal, rms=0.076511Jy  sigma=1.369625
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.165 mas, bmaj=5.315 mas, bpa=3.321 degrees
! Estimated noise=0.316707 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000754578 Jy
! Component: 100  -  total flux cleaned = 0.000825869 Jy
! Component: 150  -  total flux cleaned = 0.000846281 Jy
! Component: 200  -  total flux cleaned = 0.000827473 Jy
! Total flux subtracted in 200 components = 0.000827473 Jy
! Clean residual min=-0.002965 max=0.002537 Jy/beam
! Clean residual mean=-0.000006 rms=0.000703 Jy/beam
! Combined flux in latest and established models = 0.19802 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 137 components and 0.19802 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076490Jy  sigma=1.369661
! Fit after  self-cal, rms=0.076489Jy  sigma=1.369618
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000206394 Jy
! Component: 100  -  total flux cleaned = 0.00026459 Jy
! Component: 150  -  total flux cleaned = 0.000228989 Jy
! Component: 200  -  total flux cleaned = 0.000195534 Jy
! Total flux subtracted in 200 components = 0.000195534 Jy
! Clean residual min=-0.002951 max=0.002498 Jy/beam
! Clean residual mean=-0.000006 rms=0.000701 Jy/beam
! Combined flux in latest and established models = 0.198215 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 138 components and 0.198215 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076478Jy  sigma=1.369782
! Fit after  self-cal, rms=0.076477Jy  sigma=1.369755
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.817 mas, bmaj=2.021 mas, bpa=-4.28 degrees
! Estimated noise=0.249388 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.817 x 2.021 at -4.28 degrees (North through East)
! Clean map  min=-0.0025996  max=0.1179 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6352 mas, bmaj=1.591 mas, bpa=-4.928 degrees
! Estimated noise=0.517919 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0868206 Jy
! Component: 100  -  total flux cleaned = 0.113031 Jy
! Component: 150  -  total flux cleaned = 0.129487 Jy
! Component: 200  -  total flux cleaned = 0.140682 Jy
! Total flux subtracted in 200 components = 0.140682 Jy
! Clean residual min=-0.004449 max=0.006755 Jy/beam
! Clean residual mean=0.000006 rms=0.001168 Jy/beam
! Combined flux in latest and established models = 0.140682 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.140682 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.817 mas, bmaj=2.021 mas, bpa=-4.28 degrees
! Estimated noise=0.249388 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0156865 Jy
! Component: 100  -  total flux cleaned = 0.0258983 Jy
! Component: 150  -  total flux cleaned = 0.0331915 Jy
! Component: 200  -  total flux cleaned = 0.0386418 Jy
! Total flux subtracted in 200 components = 0.0386418 Jy
! Clean residual min=-0.003363 max=0.003804 Jy/beam
! Clean residual mean=-0.000001 rms=0.000813 Jy/beam
! Combined flux in latest and established models = 0.179324 Jy
! Adding 64 model components to the UV plane model.
! The established model now contains 74 components and 0.179324 Jy
! Inverting map 
! Added new window around map position (-1.4, -2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00440411 Jy
! Component: 100  -  total flux cleaned = 0.00782568 Jy
! Component: 150  -  total flux cleaned = 0.0105367 Jy
! Component: 200  -  total flux cleaned = 0.0125573 Jy
! Total flux subtracted in 200 components = 0.0125573 Jy
! Clean residual min=-0.002835 max=0.002660 Jy/beam
! Clean residual mean=-0.000002 rms=0.000613 Jy/beam
! Combined flux in latest and established models = 0.191881 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 93 components and 0.191881 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.165 mas, bmaj=5.315 mas, bpa=3.321 degrees
! Estimated noise=0.316707 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0029815 Jy
! Component: 100  -  total flux cleaned = 0.00464208 Jy
! Component: 150  -  total flux cleaned = 0.00517373 Jy
! Component: 200  -  total flux cleaned = 0.00550875 Jy
! Total flux subtracted in 200 components = 0.00550875 Jy
! Clean residual min=-0.003008 max=0.002503 Jy/beam
! Clean residual mean=-0.000005 rms=0.000709 Jy/beam
! Combined flux in latest and established models = 0.19739 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000133866 Jy
! Component: 100  -  total flux cleaned = 0.000192293 Jy
! Component: 150  -  total flux cleaned = 0.00024581 Jy
! Component: 200  -  total flux cleaned = 0.000314483 Jy
! Total flux subtracted in 200 components = 0.000314483 Jy
! Clean residual min=-0.002951 max=0.002490 Jy/beam
! Clean residual mean=-0.000005 rms=0.000702 Jy/beam
! Combined flux in latest and established models = 0.197704 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 123 components and 0.197704 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.817 mas, bmaj=2.021 mas, bpa=-4.28 degrees
! Estimated noise=0.249388 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.16559e-05 Jy
! Component: 100  -  total flux cleaned = 9.43632e-05 Jy
! Component: 150  -  total flux cleaned = 0.000130953 Jy
! Component: 200  -  total flux cleaned = 9.73224e-05 Jy
! Total flux subtracted in 200 components = 9.73224e-05 Jy
! Clean residual min=-0.002769 max=0.002570 Jy/beam
! Clean residual mean=-0.000002 rms=0.000560 Jy/beam
! Combined flux in latest and established models = 0.197801 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 142 components and 0.197801 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076278Jy  sigma=1.368936
! Fit after  self-cal, rms=0.076266Jy  sigma=1.368652
wmodel /J1402-2822_X_map.mod
! wmodel: Unable to open new model file: /J1402-2822_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1402-2822_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.817 x 2.021 at -4.28 degrees (North through East)
! Clean map  min=-0.0025604  max=0.1167 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1402-2822_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.116699 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000554206 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.4247 1.4247 2.84941 5.69881 11.3976 22.7952 45.5905 91.181
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0016 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.116 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  210.57 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1402-2822_X_dfm.log closed on Thu May 19 22:28:51 2016