! Started logfile: /scr/pima/bg219h_uvs/J1402-1840_X_dfm.log on Thu May 19 22:28:40 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J1402-1840_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1402-1840_X_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.9 visibilities/baseline/integration-bin.
! Found source: J1402-1840
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 20412 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1402-1840_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.015372Jy  sigma=22.613310
! Fit after  self-cal, rms=0.869545Jy  sigma=19.150086
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.669 mas, bmaj=1.566 mas, bpa=-3.905 degrees
! Estimated noise=0.448819 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0965817 Jy
! Component: 100  -  total flux cleaned = 0.128678 Jy
! Total flux subtracted in 100 components = 0.128678 Jy
! Clean residual min=-0.006085 max=0.014599 Jy/beam
! Clean residual mean=-0.000002 rms=0.001615 Jy/beam
! Combined flux in latest and established models = 0.128678 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.128678 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080644Jy  sigma=1.591485
! Fit after  self-cal, rms=0.080414Jy  sigma=1.586250
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0170654 Jy
! Component: 100  -  total flux cleaned = 0.0266699 Jy
! Total flux subtracted in 100 components = 0.0266699 Jy
! Clean residual min=-0.004339 max=0.005151 Jy/beam
! Clean residual mean=-0.000001 rms=0.001019 Jy/beam
! Combined flux in latest and established models = 0.155348 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 16 components and 0.155348 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075888Jy  sigma=1.440692
! Fit after  self-cal, rms=0.075819Jy  sigma=1.438992
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00651601 Jy
! Component: 100  -  total flux cleaned = 0.0104333 Jy
! Total flux subtracted in 100 components = 0.0104333 Jy
! Clean residual min=-0.003662 max=0.004187 Jy/beam
! Clean residual mean=-0.000000 rms=0.000876 Jy/beam
! Combined flux in latest and established models = 0.165781 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 19 components and 0.165781 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075214Jy  sigma=1.414165
! Fit after  self-cal, rms=0.075187Jy  sigma=1.413611
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8574 mas, bmaj=1.974 mas, bpa=-3.979 degrees
! Estimated noise=0.237556 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00394398 Jy
! Component: 100  -  total flux cleaned = 0.00561347 Jy
! Component: 150  -  total flux cleaned = 0.00620484 Jy
! Component: 200  -  total flux cleaned = 0.00635224 Jy
! Total flux subtracted in 200 components = 0.00635224 Jy
! Clean residual min=-0.002770 max=0.003256 Jy/beam
! Clean residual mean=0.000001 rms=0.000655 Jy/beam
! Combined flux in latest and established models = 0.172133 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 28 components and 0.172133 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075103Jy  sigma=1.406892
! Fit after  self-cal, rms=0.075086Jy  sigma=1.406511
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8574 x 1.974 at -3.979 degrees (North through East)
! Clean map  min=-0.0025689  max=0.13222 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.06     KP        0.97     
!   LA        1.01     MK        0.99     NL        0.98     OV        0.98     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.00     KP        0.95     
!   LA        1.03     MK        1.01     NL        1.01     OV        0.99     
!   PT        0.98     SC        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.02     HN        1.10     KP        0.99     
!   LA        1.01     MK        1.00     NL        0.98     OV        0.97     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.06     KP        0.98     
!   LA        1.03     MK        1.01     NL        1.01     OV        0.98     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.07     KP        0.99     
!   LA        1.00     MK        1.00     NL        0.98     OV        0.99     
!   PT        0.97     SC        0.95     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.07     KP        0.98     
!   LA        1.03     MK        1.00     NL        0.98     OV        1.00     
!   PT        0.98     SC        0.91     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.07     KP        1.00     
!   LA        1.00     MK        1.02     NL        0.96     OV        0.98     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        1.05     KP        0.99     
!   LA        1.03     MK        0.98     NL        0.98     OV        1.00     
!   PT        0.95     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.06     KP        0.99     
!   LA        1.00     MK        1.04     NL        0.97     OV        0.97     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.09     KP        0.99     
!   LA        0.98     MK        1.04     NL        1.00     OV        0.98     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.03     KP        0.99     
!   LA        1.04     MK        1.06     NL        0.99     OV        0.96     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.09     KP        0.97     
!   LA        1.02     MK        1.07     NL        0.99     OV        0.97     
!   PT        0.99     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.075086Jy  sigma=1.406511
! Fit after  self-cal, rms=0.076439Jy  sigma=1.401224
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8611 mas, bmaj=1.97 mas, bpa=-3.48 degrees
! Estimated noise=0.236219 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00118327 Jy
! Component: 100  -  total flux cleaned = -0.00126292 Jy
! Component: 150  -  total flux cleaned = -0.00129807 Jy
! Component: 200  -  total flux cleaned = -0.00135856 Jy
! Total flux subtracted in 200 components = -0.00135856 Jy
! Clean residual min=-0.002742 max=0.002809 Jy/beam
! Clean residual mean=0.000002 rms=0.000590 Jy/beam
! Combined flux in latest and established models = 0.170775 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 34 components and 0.170775 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076370Jy  sigma=1.400640
! Fit after  self-cal, rms=0.076406Jy  sigma=1.400480
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076406Jy  sigma=1.400480
! Fit after  self-cal, rms=0.075066Jy  sigma=1.395126
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8587 mas, bmaj=1.973 mas, bpa=-3.585 degrees
! Estimated noise=0.233252 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00175409 Jy
! Component: 100  -  total flux cleaned = -0.00182741 Jy
! Component: 150  -  total flux cleaned = -0.00176923 Jy
! Component: 200  -  total flux cleaned = -0.00169673 Jy
! Total flux subtracted in 200 components = -0.00169673 Jy
! Clean residual min=-0.001970 max=0.002177 Jy/beam
! Clean residual mean=0.000003 rms=0.000511 Jy/beam
! Combined flux in latest and established models = 0.169078 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 41 components and 0.169078 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074971Jy  sigma=1.394634
! Fit after  self-cal, rms=0.074963Jy  sigma=1.394507
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.6, 12.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00170186 Jy
! Component: 100  -  total flux cleaned = 0.00173256 Jy
! Component: 150  -  total flux cleaned = 0.00170134 Jy
! Component: 200  -  total flux cleaned = 0.00170212 Jy
! Total flux subtracted in 200 components = 0.00170212 Jy
! Clean residual min=-0.001947 max=0.001981 Jy/beam
! Clean residual mean=0.000003 rms=0.000494 Jy/beam
! Combined flux in latest and established models = 0.17078 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 58 components and 0.17078 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074893Jy  sigma=1.393319
! Fit after  self-cal, rms=0.074890Jy  sigma=1.393245
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074890Jy  sigma=1.393245
! Fit after  self-cal, rms=0.074546Jy  sigma=1.392901
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8591 mas, bmaj=1.976 mas, bpa=-3.582 degrees
! Estimated noise=0.231913 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000722506 Jy
! Component: 100  -  total flux cleaned = -0.000997744 Jy
! Component: 150  -  total flux cleaned = -0.00110774 Jy
! Component: 200  -  total flux cleaned = -0.0011839 Jy
! Total flux subtracted in 200 components = -0.0011839 Jy
! Clean residual min=-0.001865 max=0.001970 Jy/beam
! Clean residual mean=0.000003 rms=0.000477 Jy/beam
! Combined flux in latest and established models = 0.169596 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 62 components and 0.169596 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074491Jy  sigma=1.392676
! Fit after  self-cal, rms=0.074490Jy  sigma=1.392661
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.13361e-06 Jy
! Component: 100  -  total flux cleaned = -4.66667e-05 Jy
! Component: 150  -  total flux cleaned = -6.94877e-05 Jy
! Component: 200  -  total flux cleaned = -6.92242e-05 Jy
! Total flux subtracted in 200 components = -6.92242e-05 Jy
! Clean residual min=-0.001851 max=0.001962 Jy/beam
! Clean residual mean=0.000003 rms=0.000475 Jy/beam
! Combined flux in latest and established models = 0.169527 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 68 components and 0.169527 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074471Jy  sigma=1.392425
! Fit after  self-cal, rms=0.074470Jy  sigma=1.392416
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074470Jy  sigma=1.392416
! Fit after  self-cal, rms=0.074320Jy  sigma=1.392317
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.141 mas, bmaj=4.336 mas, bpa=2.324 degrees
! Estimated noise=0.295079 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00103781 Jy
! Component: 100  -  total flux cleaned = 0.00115998 Jy
! Component: 150  -  total flux cleaned = 0.00118069 Jy
! Component: 200  -  total flux cleaned = 0.00123745 Jy
! Total flux subtracted in 200 components = 0.00123745 Jy
! Clean residual min=-0.002015 max=0.002212 Jy/beam
! Clean residual mean=0.000006 rms=0.000584 Jy/beam
! Combined flux in latest and established models = 0.170764 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 72 components and 0.170764 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074321Jy  sigma=1.392245
! Fit after  self-cal, rms=0.074320Jy  sigma=1.392212
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.08431e-05 Jy
! Component: 100  -  total flux cleaned = 5.66839e-05 Jy
! Component: 150  -  total flux cleaned = 8.871e-05 Jy
! Component: 200  -  total flux cleaned = 0.000134755 Jy
! Total flux subtracted in 200 components = 0.000134755 Jy
! Clean residual min=-0.001959 max=0.002186 Jy/beam
! Clean residual mean=0.000006 rms=0.000581 Jy/beam
! Combined flux in latest and established models = 0.170899 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 75 components and 0.170899 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074316Jy  sigma=1.392303
! Fit after  self-cal, rms=0.074315Jy  sigma=1.392283
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8595 mas, bmaj=1.978 mas, bpa=-3.545 degrees
! Estimated noise=0.231243 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8595 x 1.978 at -3.545 degrees (North through East)
! Clean map  min=-0.0016581  max=0.12801 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.671 mas, bmaj=1.569 mas, bpa=-3.458 degrees
! Estimated noise=0.436692 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0938524 Jy
! Component: 100  -  total flux cleaned = 0.126629 Jy
! Component: 150  -  total flux cleaned = 0.143516 Jy
! Component: 200  -  total flux cleaned = 0.152587 Jy
! Total flux subtracted in 200 components = 0.152587 Jy
! Clean residual min=-0.003474 max=0.004484 Jy/beam
! Clean residual mean=0.000000 rms=0.000865 Jy/beam
! Combined flux in latest and established models = 0.152587 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.152587 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8595 mas, bmaj=1.978 mas, bpa=-3.545 degrees
! Estimated noise=0.231243 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00791895 Jy
! Component: 100  -  total flux cleaned = 0.011799 Jy
! Component: 150  -  total flux cleaned = 0.0142063 Jy
! Component: 200  -  total flux cleaned = 0.0158067 Jy
! Total flux subtracted in 200 components = 0.0158067 Jy
! Clean residual min=-0.001974 max=0.002265 Jy/beam
! Clean residual mean=0.000003 rms=0.000493 Jy/beam
! Combined flux in latest and established models = 0.168393 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 24 components and 0.168393 Jy
! Inverting map 
! Added new window around map position (-1.2, -37.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00135632 Jy
! Component: 100  -  total flux cleaned = 0.00119049 Jy
! Component: 150  -  total flux cleaned = 0.000945147 Jy
! Component: 200  -  total flux cleaned = 0.000858851 Jy
! Total flux subtracted in 200 components = 0.000858851 Jy
! Clean residual min=-0.001988 max=0.002369 Jy/beam
! Clean residual mean=0.000003 rms=0.000470 Jy/beam
! Combined flux in latest and established models = 0.169252 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 41 components and 0.169252 Jy
! Inverting map 
! Added new window around map position (9, -10.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00168281 Jy
! Component: 100  -  total flux cleaned = 0.00196336 Jy
! Component: 150  -  total flux cleaned = 0.0020902 Jy
! Component: 200  -  total flux cleaned = 0.00212714 Jy
! Total flux subtracted in 200 components = 0.00212714 Jy
! Clean residual min=-0.001833 max=0.001892 Jy/beam
! Clean residual mean=0.000004 rms=0.000445 Jy/beam
! Combined flux in latest and established models = 0.171379 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 64 components and 0.171379 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.141 mas, bmaj=4.336 mas, bpa=2.324 degrees
! Estimated noise=0.295079 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000800183 Jy
! Component: 100  -  total flux cleaned = 0.000697167 Jy
! Component: 150  -  total flux cleaned = 0.000602522 Jy
! Component: 200  -  total flux cleaned = 0.000572319 Jy
! Total flux subtracted in 200 components = 0.000572319 Jy
! Clean residual min=-0.002279 max=0.001921 Jy/beam
! Clean residual mean=0.000007 rms=0.000562 Jy/beam
! Combined flux in latest and established models = 0.171952 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.82197e-05 Jy
! Component: 100  -  total flux cleaned = -0.0001135 Jy
! Component: 150  -  total flux cleaned = -0.000167528 Jy
! Component: 200  -  total flux cleaned = -0.000218221 Jy
! Total flux subtracted in 200 components = -0.000218221 Jy
! Clean residual min=-0.002185 max=0.001873 Jy/beam
! Clean residual mean=0.000007 rms=0.000549 Jy/beam
! Combined flux in latest and established models = 0.171734 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 85 components and 0.171734 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8595 mas, bmaj=1.978 mas, bpa=-3.545 degrees
! Estimated noise=0.231243 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000376061 Jy
! Component: 100  -  total flux cleaned = -0.000413915 Jy
! Component: 150  -  total flux cleaned = -0.000479767 Jy
! Component: 200  -  total flux cleaned = -0.00047962 Jy
! Total flux subtracted in 200 components = -0.00047962 Jy
! Clean residual min=-0.001707 max=0.001901 Jy/beam
! Clean residual mean=0.000004 rms=0.000425 Jy/beam
! Combined flux in latest and established models = 0.171254 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 98 components and 0.171254 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074064Jy  sigma=1.390017
! Fit after  self-cal, rms=0.074067Jy  sigma=1.389723
wmodel /J1402-1840_X_map.mod
! wmodel: Unable to open new model file: /J1402-1840_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1402-1840_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8595 x 1.978 at -3.545 degrees (North through East)
! Clean map  min=-0.0015845  max=0.12745 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1402-1840_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.127453 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000420349 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.989421 0.989421 1.97884 3.95768 7.91537 15.8307 31.6615 63.3229
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0012 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.127 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  303.207 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1402-1840_X_dfm.log closed on Thu May 19 22:28:43 2016