! Started logfile: /scr/pima/bg219h_uvs/J1400-1858_X_dfm.log on Thu May 19 22:28:24 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J1400-1858_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1400-1858_X_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.910317 visibilities/baseline/integration-bin.
! Found source: J1400-1858
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 13764 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1400-1858_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.146200Jy  sigma=22.378840
! Fit after  self-cal, rms=0.464033Jy  sigma=8.650550
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6834 mas, bmaj=1.586 mas, bpa=-2.386 degrees
! Estimated noise=0.595063 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.432686 Jy
! Component: 100  -  total flux cleaned = 0.52704 Jy
! Total flux subtracted in 100 components = 0.52704 Jy
! Clean residual min=-0.011191 max=0.026322 Jy/beam
! Clean residual mean=0.000001 rms=0.003011 Jy/beam
! Combined flux in latest and established models = 0.52704 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.52704 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.124782Jy  sigma=2.134234
! Fit after  self-cal, rms=0.124779Jy  sigma=2.134185
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0228691 Jy
! Component: 100  -  total flux cleaned = 0.0347774 Jy
! Total flux subtracted in 100 components = 0.0347774 Jy
! Clean residual min=-0.011367 max=0.014889 Jy/beam
! Clean residual mean=0.000004 rms=0.002405 Jy/beam
! Combined flux in latest and established models = 0.561817 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.561817 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.121014Jy  sigma=1.990654
! Fit after  self-cal, rms=0.121020Jy  sigma=1.990613
! Inverting map 
! Added new window around map position (12, 41.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0140476 Jy
! Component: 100  -  total flux cleaned = 0.0217406 Jy
! Total flux subtracted in 100 components = 0.0217406 Jy
! Clean residual min=-0.010786 max=0.013968 Jy/beam
! Clean residual mean=0.000007 rms=0.002250 Jy/beam
! Combined flux in latest and established models = 0.583558 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 25 components and 0.583558 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.118874Jy  sigma=1.959144
! Fit after  self-cal, rms=0.118623Jy  sigma=1.951998
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8812 mas, bmaj=2.016 mas, bpa=-2.244 degrees
! Estimated noise=0.35048 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0073336 Jy
! Component: 100  -  total flux cleaned = 0.0086524 Jy
! Component: 150  -  total flux cleaned = 0.00883099 Jy
! Component: 200  -  total flux cleaned = 0.00882578 Jy
! Total flux subtracted in 200 components = 0.00882578 Jy
! Clean residual min=-0.009824 max=0.011626 Jy/beam
! Clean residual mean=0.000020 rms=0.002287 Jy/beam
! Combined flux in latest and established models = 0.592383 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 35 components and 0.592383 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.117547Jy  sigma=1.938766
! Fit after  self-cal, rms=0.117519Jy  sigma=1.937730
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8812 x 2.016 at -2.244 degrees (North through East)
! Clean map  min=-0.0093154  max=0.54901 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.10     KP        0.98     
!   LA        1.02     MK        1.01     NL        0.97     OV        1.00     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.07     KP        0.97     
!   LA        1.01     MK        1.01     NL        0.98     OV        1.00     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.09     KP        0.98     
!   LA        1.01     MK        1.00     NL        0.97     OV        1.00     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.06     KP        0.99     
!   LA        1.00     MK        1.00     NL        0.97     OV        1.00     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.10     KP        0.99     
!   LA        1.03     MK        1.01     NL        0.97     OV        1.00     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.08     KP        0.97     
!   LA        1.03     MK        1.01     NL        0.98     OV        0.99     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.06     KP        0.99     
!   LA        1.03     MK        1.01     NL        0.96     OV        1.00     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        1.07     KP        0.98     
!   LA        1.02     MK        1.00     NL        0.99     OV        1.00     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        1.07     KP        0.98     
!   LA        1.01     MK        1.01     NL        0.99     OV        1.00     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        1.08     KP        0.99     
!   LA        1.01     MK        1.00     NL        0.97     OV        0.99     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        1.06     KP        0.99     
!   LA        1.02     MK        1.03     NL        0.98     OV        0.99     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00     HN        1.04     KP        0.98     
!   LA        1.02     MK        1.02     NL        0.98     OV        0.99     
!   PT        0.99     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.117519Jy  sigma=1.937730
! Fit after  self-cal, rms=0.117272Jy  sigma=1.902743
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8858 mas, bmaj=2.015 mas, bpa=-1.89 degrees
! Estimated noise=0.350023 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00722683 Jy
! Component: 100  -  total flux cleaned = -0.00812268 Jy
! Component: 150  -  total flux cleaned = -0.00826614 Jy
! Component: 200  -  total flux cleaned = -0.00865001 Jy
! Total flux subtracted in 200 components = -0.00865001 Jy
! Clean residual min=-0.009513 max=0.010425 Jy/beam
! Clean residual mean=0.000017 rms=0.002004 Jy/beam
! Combined flux in latest and established models = 0.583733 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 43 components and 0.583733 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.116378Jy  sigma=1.895500
! Fit after  self-cal, rms=0.116399Jy  sigma=1.895270
! Inverting map 
! Added new window around map position (1.6, 1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00402627 Jy
! Component: 100  -  total flux cleaned = 0.00347298 Jy
! Component: 150  -  total flux cleaned = 0.00369164 Jy
! Component: 200  -  total flux cleaned = 0.00367903 Jy
! Total flux subtracted in 200 components = 0.00367903 Jy
! Clean residual min=-0.008290 max=0.008751 Jy/beam
! Clean residual mean=0.000016 rms=0.001880 Jy/beam
! Combined flux in latest and established models = 0.587412 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 67 components and 0.587412 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.114438Jy  sigma=1.878037
! Fit after  self-cal, rms=0.114362Jy  sigma=1.876030
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.114362Jy  sigma=1.876030
! Fit after  self-cal, rms=0.111042Jy  sigma=1.849719
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8831 mas, bmaj=2.015 mas, bpa=-1.927 degrees
! Estimated noise=0.346925 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000155734 Jy
! Component: 100  -  total flux cleaned = 0.00034976 Jy
! Component: 150  -  total flux cleaned = 0.000880534 Jy
! Component: 200  -  total flux cleaned = 0.00087728 Jy
! Total flux subtracted in 200 components = 0.00087728 Jy
! Clean residual min=-0.007166 max=0.007728 Jy/beam
! Clean residual mean=0.000014 rms=0.001608 Jy/beam
! Combined flux in latest and established models = 0.58829 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 81 components and 0.58829 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.109668Jy  sigma=1.843994
! Fit after  self-cal, rms=0.109628Jy  sigma=1.843150
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.4, 37.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0055054 Jy
! Component: 100  -  total flux cleaned = 0.00602876 Jy
! Component: 150  -  total flux cleaned = 0.00633113 Jy
! Component: 200  -  total flux cleaned = 0.00673885 Jy
! Total flux subtracted in 200 components = 0.00673885 Jy
! Clean residual min=-0.006632 max=0.007163 Jy/beam
! Clean residual mean=0.000016 rms=0.001526 Jy/beam
! Combined flux in latest and established models = 0.595029 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 99 components and 0.595029 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.108615Jy  sigma=1.835528
! Fit after  self-cal, rms=0.108588Jy  sigma=1.834423
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.108588Jy  sigma=1.834423
! Fit after  self-cal, rms=0.108047Jy  sigma=1.832262
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8827 mas, bmaj=2.015 mas, bpa=-1.937 degrees
! Estimated noise=0.345511 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000353645 Jy
! Component: 100  -  total flux cleaned = 0.00153539 Jy
! Component: 150  -  total flux cleaned = 0.00217471 Jy
! Component: 200  -  total flux cleaned = 0.00264378 Jy
! Total flux subtracted in 200 components = 0.00264378 Jy
! Clean residual min=-0.006749 max=0.006833 Jy/beam
! Clean residual mean=0.000017 rms=0.001471 Jy/beam
! Combined flux in latest and established models = 0.597672 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 104 components and 0.597673 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.107320Jy  sigma=1.829962
! Fit after  self-cal, rms=0.107320Jy  sigma=1.829556
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.001537 Jy
! Component: 100  -  total flux cleaned = 0.00153565 Jy
! Component: 150  -  total flux cleaned = 0.00163717 Jy
! Component: 200  -  total flux cleaned = 0.00173079 Jy
! Total flux subtracted in 200 components = 0.00173079 Jy
! Clean residual min=-0.006831 max=0.006320 Jy/beam
! Clean residual mean=0.000017 rms=0.001458 Jy/beam
! Combined flux in latest and established models = 0.599403 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 113 components and 0.599403 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.106965Jy  sigma=1.828205
! Fit after  self-cal, rms=0.106968Jy  sigma=1.828048
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.106968Jy  sigma=1.828048
! Fit after  self-cal, rms=0.106640Jy  sigma=1.827075
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.15 mas, bmaj=4.304 mas, bpa=2.663 degrees
! Estimated noise=0.437 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.76192e-05 Jy
! Component: 100  -  total flux cleaned = -7.04236e-06 Jy
! Component: 150  -  total flux cleaned = -0.000173767 Jy
! Component: 200  -  total flux cleaned = -0.000319128 Jy
! Total flux subtracted in 200 components = -0.000319128 Jy
! Clean residual min=-0.007021 max=0.006230 Jy/beam
! Clean residual mean=0.000034 rms=0.001842 Jy/beam
! Combined flux in latest and established models = 0.599084 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 128 components and 0.599084 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.106524Jy  sigma=1.826659
! Fit after  self-cal, rms=0.106521Jy  sigma=1.826503
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00050227 Jy
! Component: 100  -  total flux cleaned = -0.000572876 Jy
! Component: 150  -  total flux cleaned = -0.000638597 Jy
! Component: 200  -  total flux cleaned = -0.000699176 Jy
! Total flux subtracted in 200 components = -0.000699176 Jy
! Clean residual min=-0.006961 max=0.006338 Jy/beam
! Clean residual mean=0.000033 rms=0.001817 Jy/beam
! Combined flux in latest and established models = 0.598385 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 130 components and 0.598385 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.106404Jy  sigma=1.826729
! Fit after  self-cal, rms=0.106405Jy  sigma=1.826662
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8825 mas, bmaj=2.015 mas, bpa=-1.92 degrees
! Estimated noise=0.344559 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8825 x 2.015 at -1.92 degrees (North through East)
! Clean map  min=-0.0079953  max=0.53391 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.106405Jy  sigma=1.826662
! Fit after  self-cal, rms=0.103793Jy  sigma=1.761791
! Inverting map and beam 
! Estimated beam: bmin=0.8824 mas, bmaj=2.014 mas, bpa=-2.009 degrees
! Estimated noise=0.339933 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00840697 Jy
! Component: 100  -  total flux cleaned = -0.00938251 Jy
! Component: 150  -  total flux cleaned = -0.0092629 Jy
! Component: 200  -  total flux cleaned = -0.00926121 Jy
! Total flux subtracted in 200 components = -0.00926121 Jy
! Clean residual min=-0.005454 max=0.006094 Jy/beam
! Clean residual mean=0.000016 rms=0.001269 Jy/beam
! Combined flux in latest and established models = 0.589124 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 140 components and 0.589124 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.102661Jy  sigma=1.749453
! Fit after  self-cal, rms=0.102655Jy  sigma=1.749265
! Inverting map 
! Added new window around map position (-1.6, 6.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00315246 Jy
! Component: 100  -  total flux cleaned = 0.00376648 Jy
! Component: 150  -  total flux cleaned = 0.00376981 Jy
! Component: 200  -  total flux cleaned = 0.00377918 Jy
! Total flux subtracted in 200 components = 0.00377918 Jy
! Clean residual min=-0.005047 max=0.005356 Jy/beam
! Clean residual mean=0.000015 rms=0.001208 Jy/beam
! Combined flux in latest and established models = 0.592903 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 151 components and 0.592903 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.102024Jy  sigma=1.742084
! Fit after  self-cal, rms=0.102015Jy  sigma=1.741753
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.102015Jy  sigma=1.741753
! Fit after  self-cal, rms=0.100950Jy  sigma=1.727493
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6849 mas, bmaj=1.586 mas, bpa=-2.261 degrees
! Estimated noise=0.569464 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.413921 Jy
! Component: 100  -  total flux cleaned = 0.504183 Jy
! Component: 150  -  total flux cleaned = 0.528657 Jy
! Component: 200  -  total flux cleaned = 0.543861 Jy
! Total flux subtracted in 200 components = 0.543861 Jy
! Clean residual min=-0.007165 max=0.011068 Jy/beam
! Clean residual mean=0.000004 rms=0.001724 Jy/beam
! Combined flux in latest and established models = 0.543861 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.543861 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8824 mas, bmaj=2.013 mas, bpa=-2.049 degrees
! Estimated noise=0.335635 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0145206 Jy
! Component: 100  -  total flux cleaned = 0.0246076 Jy
! Component: 150  -  total flux cleaned = 0.0324986 Jy
! Component: 200  -  total flux cleaned = 0.037645 Jy
! Total flux subtracted in 200 components = 0.037645 Jy
! Clean residual min=-0.005033 max=0.007576 Jy/beam
! Clean residual mean=0.000015 rms=0.001340 Jy/beam
! Combined flux in latest and established models = 0.581506 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 53 components and 0.581506 Jy
! Inverting map 
! Added new window around map position (15, -28).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00612517 Jy
! Component: 100  -  total flux cleaned = 0.00797068 Jy
! Component: 150  -  total flux cleaned = 0.00942513 Jy
! Component: 200  -  total flux cleaned = 0.0104119 Jy
! Total flux subtracted in 200 components = 0.0104119 Jy
! Clean residual min=-0.004586 max=0.005532 Jy/beam
! Clean residual mean=0.000012 rms=0.001170 Jy/beam
! Combined flux in latest and established models = 0.591918 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 75 components and 0.591918 Jy
! Inverting map 
! Added new window around map position (-1.6, -37.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00451028 Jy
! Component: 100  -  total flux cleaned = 0.00512391 Jy
! Component: 150  -  total flux cleaned = 0.00540534 Jy
! Component: 200  -  total flux cleaned = 0.00580285 Jy
! Total flux subtracted in 200 components = 0.00580285 Jy
! Clean residual min=-0.004532 max=0.005062 Jy/beam
! Clean residual mean=0.000013 rms=0.001085 Jy/beam
! Combined flux in latest and established models = 0.597721 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 98 components and 0.597721 Jy
! Inverting map 
! Added new window around map position (0.6, -23.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0033233 Jy
! Component: 100  -  total flux cleaned = 0.00470646 Jy
! Component: 150  -  total flux cleaned = 0.00564561 Jy
! Component: 200  -  total flux cleaned = 0.00598265 Jy
! Total flux subtracted in 200 components = 0.00598265 Jy
! Clean residual min=-0.004399 max=0.004677 Jy/beam
! Clean residual mean=0.000012 rms=0.001030 Jy/beam
! Combined flux in latest and established models = 0.603703 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 123 components and 0.603703 Jy
! Inverting map 
! Added new window around map position (-15.6, 25).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00317906 Jy
! Component: 100  -  total flux cleaned = 0.00305198 Jy
! Component: 150  -  total flux cleaned = 0.00358407 Jy
! Component: 200  -  total flux cleaned = 0.0036852 Jy
! Total flux subtracted in 200 components = 0.0036852 Jy
! Clean residual min=-0.004593 max=0.004392 Jy/beam
! Clean residual mean=0.000011 rms=0.000981 Jy/beam
! Combined flux in latest and established models = 0.607388 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 146 components and 0.607388 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.148 mas, bmaj=4.295 mas, bpa=2.526 degrees
! Estimated noise=0.426582 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00117276 Jy
! Component: 100  -  total flux cleaned = -0.00246275 Jy
! Component: 150  -  total flux cleaned = -0.0035216 Jy
! Component: 200  -  total flux cleaned = -0.00423634 Jy
! Total flux subtracted in 200 components = -0.00423634 Jy
! Clean residual min=-0.004280 max=0.004673 Jy/beam
! Clean residual mean=0.000021 rms=0.001236 Jy/beam
! Combined flux in latest and established models = 0.603152 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.68074e-05 Jy
! Component: 100  -  total flux cleaned = -0.000146052 Jy
! Component: 150  -  total flux cleaned = -0.000144072 Jy
! Component: 200  -  total flux cleaned = -0.000270433 Jy
! Total flux subtracted in 200 components = -0.000270433 Jy
! Clean residual min=-0.004252 max=0.004509 Jy/beam
! Clean residual mean=0.000020 rms=0.001208 Jy/beam
! Combined flux in latest and established models = 0.602882 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 180 components and 0.602882 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8824 mas, bmaj=2.013 mas, bpa=-2.049 degrees
! Estimated noise=0.335635 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000440155 Jy
! Component: 100  -  total flux cleaned = -0.000248273 Jy
! Component: 150  -  total flux cleaned = -0.000247969 Jy
! Component: 200  -  total flux cleaned = 1.56133e-05 Jy
! Total flux subtracted in 200 components = 1.56133e-05 Jy
! Clean residual min=-0.004441 max=0.004218 Jy/beam
! Clean residual mean=0.000010 rms=0.000912 Jy/beam
! Combined flux in latest and established models = 0.602897 Jy
selfcal
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 194 components and 0.602897 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.099431Jy  sigma=1.703562
! Fit after  self-cal, rms=0.099326Jy  sigma=1.701576
wmodel /J1400-1858_X_map.mod
! wmodel: Unable to open new model file: /J1400-1858_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1400-1858_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8824 x 2.013 at -2.049 degrees (North through East)
! Clean map  min=-0.0069772  max=0.51703 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1400-1858_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.517033 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000893047 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.518175 0.518175 1.03635 2.0727 4.1454 8.29081 16.5816 33.1632 66.3265
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0026 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.517 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  578.954 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1400-1858_X_dfm.log closed on Thu May 19 22:28:27 2016