! Started logfile: /scr/pima/bg219h_uvs/J1352-4412_S_dfm.log on Thu May 19 22:28:02 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219h_uvs/J1352-4412_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1352-4412_S_uva.fits
! AN table 1: 7 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.619048 visibilities/baseline/integration-bin.
! Found source: J1352-4412
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 364 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1352-4412_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.054513Jy  sigma=13.365252
! Fit after  self-cal, rms=0.737855Jy  sigma=9.531147
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.628 mas, bmaj=44.48 mas, bpa=11.68 degrees
! Estimated noise=5.34748 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.198202 Jy
! Component: 100  -  total flux cleaned = 0.245554 Jy
! Total flux subtracted in 100 components = 0.245554 Jy
! Clean residual min=-0.017806 max=0.020102 Jy/beam
! Clean residual mean=-0.000057 rms=0.006787 Jy/beam
! Combined flux in latest and established models = 0.245554 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.245554 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087236Jy  sigma=1.130065
! Fit after  self-cal, rms=0.087204Jy  sigma=1.129605
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.209 mas, bmaj=45.47 mas, bpa=11.66 degrees
! Estimated noise=4.38189 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0254623 Jy
! Component: 100  -  total flux cleaned = 0.0276907 Jy
! Component: 150  -  total flux cleaned = 0.0298185 Jy
! Component: 200  -  total flux cleaned = 0.029143 Jy
! Total flux subtracted in 200 components = 0.029143 Jy
! Clean residual min=-0.006066 max=0.006046 Jy/beam
! Clean residual mean=0.000012 rms=0.002462 Jy/beam
! Combined flux in latest and established models = 0.274697 Jy
! Performing phase self-cal
! Adding 66 model components to the UV plane model.
! The established model now contains 86 components and 0.274697 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075441Jy  sigma=0.959187
! Fit after  self-cal, rms=0.075109Jy  sigma=0.954781
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.209 x 45.47 at 11.66 degrees (North through East)
! Clean map  min=-0.012613  max=0.24443 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        0.99     LA        0.97     NL        1.00*    
!   OV        1.00     PT        1.06     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.07     LA        0.95     NL        1.00*    
!   OV        0.99     PT        0.93     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        0.96     LA        0.97     NL        1.00*    
!   OV        1.02     PT        0.98     SC        1.05     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        0.91     LA        1.02     NL        1.00*    
!   OV        1.05     PT        1.02     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.075109Jy  sigma=0.954781
! Fit after  self-cal, rms=0.074524Jy  sigma=0.935958
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.233 mas, bmaj=45.38 mas, bpa=11.66 degrees
! Estimated noise=4.34229 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00259508 Jy
! Component: 100  -  total flux cleaned = 0.00212783 Jy
! Component: 150  -  total flux cleaned = 0.0018974 Jy
! Component: 200  -  total flux cleaned = 0.00135983 Jy
! Total flux subtracted in 200 components = 0.00135983 Jy
! Clean residual min=-0.002885 max=0.002940 Jy/beam
! Clean residual mean=0.000001 rms=0.001044 Jy/beam
! Combined flux in latest and established models = 0.276057 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 128 components and 0.276057 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073184Jy  sigma=0.920861
! Fit after  self-cal, rms=0.073112Jy  sigma=0.919742
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073112Jy  sigma=0.919742
! Fit after  self-cal, rms=0.073239Jy  sigma=0.919232
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.237 mas, bmaj=45.44 mas, bpa=11.67 degrees
! Estimated noise=4.34035 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112478 Jy
! Component: 100  -  total flux cleaned = 0.00113111 Jy
! Component: 150  -  total flux cleaned = 0.0011319 Jy
! Component: 200  -  total flux cleaned = 0.00113327 Jy
! Total flux subtracted in 200 components = 0.00113327 Jy
! Clean residual min=-0.002502 max=0.002459 Jy/beam
! Clean residual mean=0.000008 rms=0.000874 Jy/beam
! Combined flux in latest and established models = 0.27719 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 156 components and 0.27719 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072552Jy  sigma=0.912508
! Fit after  self-cal, rms=0.072550Jy  sigma=0.912157
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.99798e-05 Jy
! Component: 100  -  total flux cleaned = 0.00084665 Jy
! Component: 150  -  total flux cleaned = 0.00171408 Jy
! Component: 200  -  total flux cleaned = 0.00206253 Jy
! Total flux subtracted in 200 components = 0.00206253 Jy
! Clean residual min=-0.001878 max=0.001877 Jy/beam
! Clean residual mean=0.000009 rms=0.000709 Jy/beam
! Combined flux in latest and established models = 0.279253 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 189 components and 0.279253 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072148Jy  sigma=0.907174
! Fit after  self-cal, rms=0.072139Jy  sigma=0.906927
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072139Jy  sigma=0.906927
! Fit after  self-cal, rms=0.072041Jy  sigma=0.906627
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.239 mas, bmaj=45.45 mas, bpa=11.67 degrees
! Estimated noise=4.33781 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00171945 Jy
! Component: 100  -  total flux cleaned = 0.0017273 Jy
! Component: 150  -  total flux cleaned = 0.00172517 Jy
! Component: 200  -  total flux cleaned = 0.00150148 Jy
! Total flux subtracted in 200 components = 0.00150148 Jy
! Clean residual min=-0.001875 max=0.001867 Jy/beam
! Clean residual mean=0.000016 rms=0.000656 Jy/beam
! Combined flux in latest and established models = 0.280754 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 216 components and 0.280755 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071706Jy  sigma=0.903632
! Fit after  self-cal, rms=0.071704Jy  sigma=0.903472
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00012033 Jy
! Component: 100  -  total flux cleaned = 0.000683322 Jy
! Component: 150  -  total flux cleaned = 0.00111956 Jy
! Component: 200  -  total flux cleaned = 0.000955571 Jy
! Total flux subtracted in 200 components = 0.000955571 Jy
! Clean residual min=-0.001336 max=0.001341 Jy/beam
! Clean residual mean=0.000016 rms=0.000546 Jy/beam
! Combined flux in latest and established models = 0.28171 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 243 components and 0.28171 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071509Jy  sigma=0.900662
! Fit after  self-cal, rms=0.071502Jy  sigma=0.900538
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071502Jy  sigma=0.900538
! Fit after  self-cal, rms=0.071490Jy  sigma=0.900295
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.08 mas, bmaj=50.89 mas, bpa=1.404 degrees
! Estimated noise=5.31625 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00104493 Jy
! Component: 100  -  total flux cleaned = 0.00145125 Jy
! Component: 150  -  total flux cleaned = 0.00200655 Jy
! Component: 200  -  total flux cleaned = 0.00270699 Jy
! Total flux subtracted in 200 components = 0.00270699 Jy
! Clean residual min=-0.001415 max=0.001416 Jy/beam
! Clean residual mean=0.000039 rms=0.000647 Jy/beam
! Combined flux in latest and established models = 0.284417 Jy
selfcal
! Performing phase self-cal
! Adding 66 model components to the UV plane model.
! The established model now contains 307 components and 0.284417 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071259Jy  sigma=0.898907
! Fit after  self-cal, rms=0.071264Jy  sigma=0.898844
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000273966 Jy
! Component: 100  -  total flux cleaned = 0.000190904 Jy
! Component: 150  -  total flux cleaned = 0.000191277 Jy
! Component: 200  -  total flux cleaned = -5.83913e-05 Jy
! Total flux subtracted in 200 components = -5.83913e-05 Jy
! Clean residual min=-0.001413 max=0.001420 Jy/beam
! Clean residual mean=0.000040 rms=0.000570 Jy/beam
! Combined flux in latest and established models = 0.284359 Jy
! Performing phase self-cal
! Adding 66 model components to the UV plane model.
! The established model now contains 363 components and 0.284359 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071173Jy  sigma=0.897768
! Fit after  self-cal, rms=0.071187Jy  sigma=0.897725
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.243 mas, bmaj=45.46 mas, bpa=11.67 degrees
! Estimated noise=4.33657 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.243 x 45.46 at 11.67 degrees (North through East)
! Clean map  min=-0.0098609  max=0.24252 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.644 mas, bmaj=44.58 mas, bpa=11.7 degrees
! Estimated noise=5.37349 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.198608 Jy
! Component: 100  -  total flux cleaned = 0.246063 Jy
! Component: 150  -  total flux cleaned = 0.254067 Jy
! Component: 200  -  total flux cleaned = 0.259558 Jy
! Total flux subtracted in 200 components = 0.259558 Jy
! Clean residual min=-0.009912 max=0.009906 Jy/beam
! Clean residual mean=-0.000035 rms=0.003994 Jy/beam
! Combined flux in latest and established models = 0.259558 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 49 model components to the UV plane model.
! The established model now contains 49 components and 0.259558 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.243 mas, bmaj=45.46 mas, bpa=11.67 degrees
! Estimated noise=4.33657 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00438601 Jy
! Component: 100  -  total flux cleaned = 0.00303727 Jy
! Component: 150  -  total flux cleaned = 0.00125263 Jy
! Component: 200  -  total flux cleaned = 0.00156003 Jy
! Total flux subtracted in 200 components = 0.00156003 Jy
! Clean residual min=-0.004825 max=0.004810 Jy/beam
! Clean residual mean=-0.000034 rms=0.001879 Jy/beam
! Combined flux in latest and established models = 0.261118 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 94 components and 0.261118 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.08 mas, bmaj=50.89 mas, bpa=1.404 degrees
! Estimated noise=5.31625 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00283567 Jy
! Component: 100  -  total flux cleaned = -0.00205444 Jy
! Component: 150  -  total flux cleaned = -0.00204865 Jy
! Component: 200  -  total flux cleaned = -0.00204167 Jy
! Total flux subtracted in 200 components = -0.00204167 Jy
! Clean residual min=-0.002433 max=0.002444 Jy/beam
! Clean residual mean=0.000006 rms=0.001075 Jy/beam
! Combined flux in latest and established models = 0.259076 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.06548e-06 Jy
! Component: 100  -  total flux cleaned = 3.21284e-06 Jy
! Component: 150  -  total flux cleaned = -0.00013869 Jy
! Component: 200  -  total flux cleaned = -0.000714146 Jy
! Total flux subtracted in 200 components = -0.000714146 Jy
! Clean residual min=-0.002478 max=0.002488 Jy/beam
! Clean residual mean=0.000095 rms=0.001122 Jy/beam
! Combined flux in latest and established models = 0.258362 Jy
! Adding 149 model components to the UV plane model.
! The established model now contains 243 components and 0.258362 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.243 mas, bmaj=45.46 mas, bpa=11.67 degrees
! Estimated noise=4.33657 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00267311 Jy
! Component: 100  -  total flux cleaned = 0.00333007 Jy
! Component: 150  -  total flux cleaned = 0.00347617 Jy
! Component: 200  -  total flux cleaned = 0.00347585 Jy
! Total flux subtracted in 200 components = 0.00347585 Jy
! Clean residual min=-0.002588 max=0.002536 Jy/beam
! Clean residual mean=0.000032 rms=0.000908 Jy/beam
! Combined flux in latest and established models = 0.261838 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 275 components and 0.261838 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071759Jy  sigma=0.906052
! Fit after  self-cal, rms=0.071752Jy  sigma=0.905234
wmodel /J1352-4412_S_map.mod
! wmodel: Unable to open new model file: /J1352-4412_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1352-4412_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.243 x 45.46 at 11.67 degrees (North through East)
! Clean map  min=-0.010688  max=0.23599 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1352-4412_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.235991 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000810231 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.03 1.03 2.05999 4.11998 8.23996 16.4799 32.9599 65.9197
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0024 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.235 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  291.263 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1352-4412_S_dfm.log closed on Thu May 19 22:28:06 2016