! Started logfile: /scr/pima/bg219h_uvs/J1349-1110_X_uvs.log on Thu Apr 7 12:11:37 2016 obs /scr/pima/bg219h_uvs/J1349-1110_X_uva.fits ! Reading UV FITS file: /scr/pima/bg219h_uvs/J1349-1110_X_uva.fits ! AN table 1: 61 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.884517 visibilities/baseline/integration-bin. ! Found source: J1349-1110 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 29136 visibilities. select rr, 1,2,3,4,6,7,8 ! Selecting polarization: RR, channels: 1..4 6..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: (none) ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: (none) ! Reading IF 10 channels: (none) ! Reading IF 11 channels: (none) ! Reading IF 12 channels: (none) print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219h_uvs/J1349-1110_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=1.014846Jy sigma=24.665055 ! Fit after self-cal, rms=0.833867Jy sigma=20.345999 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7017 mas, bmaj=1.693 mas, bpa=-3.369 degrees ! Estimated noise=0.528211 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.131265 Jy ! Component: 100 - total flux cleaned = 0.16002 Jy ! Total flux subtracted in 100 components = 0.16002 Jy ! Clean residual min=-0.009015 max=0.015555 Jy/beam ! Clean residual mean=-0.000035 rms=0.002554 Jy/beam ! Combined flux in latest and established models = 0.16002 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.16002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.079011Jy sigma=1.876682 ! Fit after self-cal, rms=0.078766Jy sigma=1.869786 ! Inverting map ! Added new window around map position (-3.8, -26.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0144241 Jy ! Component: 100 - total flux cleaned = 0.0222855 Jy ! Total flux subtracted in 100 components = 0.0222855 Jy ! Clean residual min=-0.008713 max=0.011590 Jy/beam ! Clean residual mean=-0.000027 rms=0.002240 Jy/beam ! Combined flux in latest and established models = 0.182305 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 17 components and 0.182305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.075688Jy sigma=1.783193 ! Fit after self-cal, rms=0.075456Jy sigma=1.777595 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8945 mas, bmaj=2.082 mas, bpa=-1.244 degrees ! Estimated noise=0.240354 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00927277 Jy ! Component: 100 - total flux cleaned = 0.0123572 Jy ! Component: 150 - total flux cleaned = 0.0126786 Jy ! Component: 200 - total flux cleaned = 0.0127748 Jy ! Total flux subtracted in 200 components = 0.0127748 Jy ! Clean residual min=-0.011621 max=0.012638 Jy/beam ! Clean residual mean=-0.000029 rms=0.003203 Jy/beam ! Combined flux in latest and established models = 0.19508 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 29 components and 0.19508 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.074605Jy sigma=1.745269 ! Fit after self-cal, rms=0.074494Jy sigma=1.742456 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8945 x 2.082 at -1.244 degrees (North through East) ! Clean map min=-0.011797 max=0.16446 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.074494Jy sigma=1.742456 ! Fit after self-cal, rms=0.074494Jy sigma=1.742456 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8945 mas, bmaj=2.082 mas, bpa=-1.244 degrees ! Estimated noise=0.240354 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149403 Jy ! Component: 100 - total flux cleaned = 0.00150033 Jy ! Component: 150 - total flux cleaned = 0.00156804 Jy ! Component: 200 - total flux cleaned = 0.0015665 Jy ! Total flux subtracted in 200 components = 0.0015665 Jy ! Clean residual min=-0.012158 max=0.011431 Jy/beam ! Clean residual mean=-0.000027 rms=0.003161 Jy/beam ! Combined flux in latest and established models = 0.196646 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 32 components and 0.196646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.074393Jy sigma=1.737877 ! Fit after self-cal, rms=0.074385Jy sigma=1.737642 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.074385Jy sigma=1.737642 ! Fit after self-cal, rms=0.073410Jy sigma=1.715577 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.903 mas, bmaj=2.093 mas, bpa=-1.038 degrees ! Estimated noise=0.235887 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00353322 Jy ! Component: 100 - total flux cleaned = -0.00478363 Jy ! Component: 150 - total flux cleaned = -0.00518799 Jy ! Component: 200 - total flux cleaned = -0.00527812 Jy ! Total flux subtracted in 200 components = -0.00527812 Jy ! Clean residual min=-0.011479 max=0.010953 Jy/beam ! Clean residual mean=-0.000019 rms=0.002942 Jy/beam ! Combined flux in latest and established models = 0.191368 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 36 components and 0.191368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.073288Jy sigma=1.709299 ! Fit after self-cal, rms=0.073300Jy sigma=1.708990 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000107793 Jy ! Component: 100 - total flux cleaned = -0.000108254 Jy ! Component: 150 - total flux cleaned = -0.000109117 Jy ! Component: 200 - total flux cleaned = -7.2705e-05 Jy ! Total flux subtracted in 200 components = -7.2705e-05 Jy ! Clean residual min=-0.011537 max=0.010874 Jy/beam ! Clean residual mean=-0.000019 rms=0.002936 Jy/beam ! Combined flux in latest and established models = 0.191296 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 38 components and 0.191296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.073265Jy sigma=1.707928 ! Fit after self-cal, rms=0.073263Jy sigma=1.707845 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.073263Jy sigma=1.707845 ! Fit after self-cal, rms=0.073054Jy sigma=1.707025 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9055 mas, bmaj=2.096 mas, bpa=-0.9663 degrees ! Estimated noise=0.234732 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0013017 Jy ! Component: 100 - total flux cleaned = -0.00148502 Jy ! Component: 150 - total flux cleaned = -0.00148452 Jy ! Component: 200 - total flux cleaned = -0.0014855 Jy ! Total flux subtracted in 200 components = -0.0014855 Jy ! Clean residual min=-0.011496 max=0.010916 Jy/beam ! Clean residual mean=-0.000018 rms=0.002897 Jy/beam ! Combined flux in latest and established models = 0.18981 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 42 components and 0.18981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.073029Jy sigma=1.705654 ! Fit after self-cal, rms=0.073029Jy sigma=1.705577 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000175976 Jy ! Component: 100 - total flux cleaned = -0.00017534 Jy ! Component: 150 - total flux cleaned = -0.000175593 Jy ! Component: 200 - total flux cleaned = -0.000146774 Jy ! Total flux subtracted in 200 components = -0.000146774 Jy ! Clean residual min=-0.011485 max=0.010890 Jy/beam ! Clean residual mean=-0.000018 rms=0.002894 Jy/beam ! Combined flux in latest and established models = 0.189663 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 43 components and 0.189663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.073008Jy sigma=1.704975 ! Fit after self-cal, rms=0.073007Jy sigma=1.704943 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.073007Jy sigma=1.704943 ! Fit after self-cal, rms=0.072964Jy sigma=1.704855 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.178 mas, bmaj=3.984 mas, bpa=2.561 degrees ! Estimated noise=0.28917 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00132846 Jy ! Component: 100 - total flux cleaned = -0.00182646 Jy ! Component: 150 - total flux cleaned = -0.00203908 Jy ! Component: 200 - total flux cleaned = -0.00203813 Jy ! Total flux subtracted in 200 components = -0.00203813 Jy ! Clean residual min=-0.019209 max=0.017227 Jy/beam ! Clean residual mean=-0.000020 rms=0.005032 Jy/beam ! Combined flux in latest and established models = 0.187625 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 43 components and 0.187625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.073116Jy sigma=1.704774 ! Fit after self-cal, rms=0.073084Jy sigma=1.704222 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00021431 Jy ! Component: 100 - total flux cleaned = 0.000214026 Jy ! Component: 150 - total flux cleaned = 0.000133027 Jy ! Component: 200 - total flux cleaned = 0.000131078 Jy ! Total flux subtracted in 200 components = 0.000131078 Jy ! Clean residual min=-0.019334 max=0.017074 Jy/beam ! Clean residual mean=-0.000019 rms=0.004998 Jy/beam ! Combined flux in latest and established models = 0.187756 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 46 components and 0.187756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.073209Jy sigma=1.706077 ! Fit after self-cal, rms=0.073195Jy sigma=1.705887 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.9064 mas, bmaj=2.097 mas, bpa=-0.9351 degrees ! Estimated noise=0.234403 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9064 x 2.097 at -0.9351 degrees (North through East) ! Clean map min=-0.011435 max=0.16543 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7104 mas, bmaj=1.699 mas, bpa=-3.127 degrees ! Estimated noise=0.521018 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.129243 Jy ! Component: 100 - total flux cleaned = 0.161023 Jy ! Component: 150 - total flux cleaned = 0.175229 Jy ! Component: 200 - total flux cleaned = 0.182033 Jy ! Total flux subtracted in 200 components = 0.182033 Jy ! Clean residual min=-0.007686 max=0.009468 Jy/beam ! Clean residual mean=-0.000018 rms=0.002015 Jy/beam ! Combined flux in latest and established models = 0.182033 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.182033 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9064 mas, bmaj=2.097 mas, bpa=-0.9351 degrees ! Estimated noise=0.234403 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (13, 12.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126525 Jy ! Component: 100 - total flux cleaned = 0.0182193 Jy ! Component: 150 - total flux cleaned = 0.022151 Jy ! Component: 200 - total flux cleaned = 0.025221 Jy ! Total flux subtracted in 200 components = 0.025221 Jy ! Clean residual min=-0.010003 max=0.009680 Jy/beam ! Clean residual mean=-0.000010 rms=0.002614 Jy/beam ! Combined flux in latest and established models = 0.207254 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 52 components and 0.207254 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.178 mas, bmaj=3.984 mas, bpa=2.561 degrees ! Estimated noise=0.28917 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000912522 Jy ! Component: 100 - total flux cleaned = 0.00280394 Jy ! Component: 150 - total flux cleaned = 0.00420862 Jy ! Component: 200 - total flux cleaned = 0.00529492 Jy ! Total flux subtracted in 200 components = 0.00529492 Jy ! Clean residual min=-0.016852 max=0.014070 Jy/beam ! Clean residual mean=0.000002 rms=0.004274 Jy/beam ! Combined flux in latest and established models = 0.212549 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000966001 Jy ! Component: 100 - total flux cleaned = 0.00121919 Jy ! Component: 150 - total flux cleaned = 0.00157265 Jy ! Component: 200 - total flux cleaned = 0.00178893 Jy ! Total flux subtracted in 200 components = 0.00178893 Jy ! Clean residual min=-0.016655 max=0.013453 Jy/beam ! Clean residual mean=0.000006 rms=0.004194 Jy/beam ! Combined flux in latest and established models = 0.214338 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 75 components and 0.214338 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9064 mas, bmaj=2.097 mas, bpa=-0.9351 degrees ! Estimated noise=0.234403 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00287326 Jy ! Component: 100 - total flux cleaned = 0.00266867 Jy ! Component: 150 - total flux cleaned = 0.00249865 Jy ! Component: 200 - total flux cleaned = 0.00234467 Jy ! Total flux subtracted in 200 components = 0.00234467 Jy ! Clean residual min=-0.009726 max=0.009064 Jy/beam ! Clean residual mean=-0.000003 rms=0.002474 Jy/beam ! Combined flux in latest and established models = 0.216682 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 92 components and 0.216682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Not correcting unselected IF 9. ! ! Not correcting unselected IF 10. ! ! Not correcting unselected IF 11. ! ! Not correcting unselected IF 12. ! ! Fit before self-cal, rms=0.071459Jy sigma=1.646306 ! Fit after self-cal, rms=0.071139Jy sigma=1.636079 wmodel /scr/pima/bg219h_uvs/J1349-1110_X_map.mod ! Writing 92 model components to file: /scr/pima/bg219h_uvs/J1349-1110_X_map.mod wobs /scr/pima/bg219h_uvs/J1349-1110_X_uvs.fits ! Writing UV FITS file: /scr/pima/bg219h_uvs/J1349-1110_X_uvs.fits wwins /scr/pima/bg219h_uvs/J1349-1110_X_map.win ! wwins: Wrote 3 windows to /scr/pima/bg219h_uvs/J1349-1110_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00429722 Jy ! Component: 100 - total flux cleaned = -0.00771512 Jy ! Component: 150 - total flux cleaned = -0.00976266 Jy ! Component: 200 - total flux cleaned = -0.0112975 Jy ! Component: 250 - total flux cleaned = -0.0123658 Jy ! Component: 300 - total flux cleaned = -0.0135168 Jy ! Component: 350 - total flux cleaned = -0.0140056 Jy ! Component: 400 - total flux cleaned = -0.0145977 Jy ! Component: 450 - total flux cleaned = -0.0148275 Jy ! Component: 500 - total flux cleaned = -0.0152735 Jy ! Component: 550 - total flux cleaned = -0.0155977 Jy ! Component: 600 - total flux cleaned = -0.0162213 Jy ! Component: 650 - total flux cleaned = -0.0166245 Jy ! Component: 700 - total flux cleaned = -0.0171119 Jy ! Component: 750 - total flux cleaned = -0.0171093 Jy ! Component: 800 - total flux cleaned = -0.0172006 Jy ! Component: 850 - total flux cleaned = -0.017291 Jy ! Component: 900 - total flux cleaned = -0.0172907 Jy ! Component: 950 - total flux cleaned = -0.0173747 Jy ! Component: 1000 - total flux cleaned = -0.0173769 Jy ! Component: 1050 - total flux cleaned = -0.0176992 Jy ! Component: 1100 - total flux cleaned = -0.0175416 Jy ! Component: 1150 - total flux cleaned = -0.0176191 Jy ! Component: 1200 - total flux cleaned = -0.0176185 Jy ! Component: 1250 - total flux cleaned = -0.0175454 Jy ! Component: 1300 - total flux cleaned = -0.0176876 Jy ! Component: 1350 - total flux cleaned = -0.0176171 Jy ! Component: 1400 - total flux cleaned = -0.0176182 Jy ! Component: 1450 - total flux cleaned = -0.0177509 Jy ! Component: 1500 - total flux cleaned = -0.0176841 Jy ! Component: 1550 - total flux cleaned = -0.0176816 Jy ! Component: 1600 - total flux cleaned = -0.0174913 Jy ! Component: 1650 - total flux cleaned = -0.0173094 Jy ! Component: 1700 - total flux cleaned = -0.0173104 Jy ! Component: 1750 - total flux cleaned = -0.0173101 Jy ! Component: 1800 - total flux cleaned = -0.017309 Jy ! Component: 1850 - total flux cleaned = -0.0170831 Jy ! Component: 1900 - total flux cleaned = -0.0168631 Jy ! Component: 1950 - total flux cleaned = -0.0169175 Jy ! Component: 2000 - total flux cleaned = -0.0168104 Jy ! Component: 2050 - total flux cleaned = -0.0165991 Jy ! Component: 2100 - total flux cleaned = -0.0164981 Jy ! Component: 2150 - total flux cleaned = -0.0164976 Jy ! Component: 2200 - total flux cleaned = -0.0164476 Jy ! Component: 2250 - total flux cleaned = -0.0163998 Jy ! Component: 2300 - total flux cleaned = -0.0163993 Jy ! Component: 2350 - total flux cleaned = -0.0164 Jy ! Component: 2400 - total flux cleaned = -0.0163075 Jy ! Component: 2450 - total flux cleaned = -0.0163084 Jy ! Component: 2500 - total flux cleaned = -0.0163976 Jy ! Component: 2550 - total flux cleaned = -0.0163533 Jy ! Component: 2600 - total flux cleaned = -0.0161804 Jy ! Component: 2650 - total flux cleaned = -0.0162661 Jy ! Component: 2700 - total flux cleaned = -0.0163924 Jy ! Component: 2750 - total flux cleaned = -0.0164754 Jy ! Component: 2800 - total flux cleaned = -0.0164757 Jy ! Component: 2850 - total flux cleaned = -0.0165157 Jy ! Component: 2900 - total flux cleaned = -0.0166347 Jy ! Component: 2950 - total flux cleaned = -0.0168288 Jy ! Component: 3000 - total flux cleaned = -0.0168662 Jy ! Component: 3050 - total flux cleaned = -0.0169801 Jy ! Component: 3100 - total flux cleaned = -0.0170166 Jy ! Component: 3150 - total flux cleaned = -0.0171268 Jy ! Component: 3200 - total flux cleaned = -0.0171994 Jy ! Component: 3250 - total flux cleaned = -0.017414 Jy ! Component: 3300 - total flux cleaned = -0.0175196 Jy ! Component: 3350 - total flux cleaned = -0.017728 Jy ! Component: 3400 - total flux cleaned = -0.017968 Jy ! Component: 3450 - total flux cleaned = -0.0179336 Jy ! Component: 3500 - total flux cleaned = -0.018134 Jy ! Component: 3550 - total flux cleaned = -0.0182997 Jy ! Component: 3600 - total flux cleaned = -0.0184627 Jy ! Component: 3650 - total flux cleaned = -0.0186236 Jy ! Component: 3700 - total flux cleaned = -0.0186554 Jy ! Component: 3750 - total flux cleaned = -0.0187502 Jy ! Component: 3800 - total flux cleaned = -0.0188435 Jy ! Component: 3850 - total flux cleaned = -0.0189052 Jy ! Component: 3900 - total flux cleaned = -0.0189662 Jy ! Component: 3950 - total flux cleaned = -0.0189663 Jy ! Component: 4000 - total flux cleaned = -0.0190856 Jy ! Component: 4050 - total flux cleaned = -0.0191738 Jy ! Total flux subtracted in 4096 components = -0.0192027 Jy ! Clean residual min=-0.001641 max=0.001607 Jy/beam ! Clean residual mean=0.000001 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.197479 Jy keep ! Adding 428 model components to the UV plane model. ! The established model now contains 520 components and 0.197479 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219h_uvs/J1349-1110_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9064 x 2.097 at -0.9351 degrees (North through East) ! Clean map min=-0.004884 max=0.16022 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1349-1110_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.160223 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000542526 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.01582 1.01582 2.03165 4.06329 8.12658 16.2532 32.5063 65.0126 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.16 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 295.327 quit ! Quitting program ! Log file /scr/pima/bg219h_uvs/J1349-1110_X_uvs.log closed on Thu Apr 7 12:11:41 2016