! Started logfile: /scr/pima/bg219h_uvs/J1347-3750_X_dfm.log on Thu May 19 22:27:18 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J1347-3750_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1347-3750_X_uva.fits
! AN table 1: 28 integrations on 36 of 36 possible baselines.
! AN table 2: 29 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.884503 visibilities/baseline/integration-bin.
! Found source: J1347-3750
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 21780 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1347-3750_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 9.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 10.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 11.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 12.
!  A total of 9 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.014818Jy  sigma=18.890028
! Fit after  self-cal, rms=0.883241Jy  sigma=16.347406
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5707 mas, bmaj=1.558 mas, bpa=-1.707 degrees
! Estimated noise=0.579872 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0958725 Jy
! Component: 100  -  total flux cleaned = 0.116779 Jy
! Total flux subtracted in 100 components = 0.116779 Jy
! Clean residual min=-0.005807 max=0.008265 Jy/beam
! Clean residual mean=0.000005 rms=0.001303 Jy/beam
! Combined flux in latest and established models = 0.116779 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.116779 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086482Jy  sigma=1.433455
! Fit after  self-cal, rms=0.086022Jy  sigma=1.426653
! Inverting map 
! Added new window around map position (-1, 1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00759796 Jy
! Component: 100  -  total flux cleaned = 0.0102942 Jy
! Total flux subtracted in 100 components = 0.0102942 Jy
! Clean residual min=-0.005334 max=0.006499 Jy/beam
! Clean residual mean=0.000002 rms=0.001163 Jy/beam
! Combined flux in latest and established models = 0.127073 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.127073 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085519Jy  sigma=1.416058
! Fit after  self-cal, rms=0.085456Jy  sigma=1.414143
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7822 mas, bmaj=2.073 mas, bpa=-2.556 degrees
! Estimated noise=0.267964 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00271154 Jy
! Component: 100  -  total flux cleaned = 0.00304679 Jy
! Component: 150  -  total flux cleaned = 0.00327966 Jy
! Component: 200  -  total flux cleaned = 0.00347918 Jy
! Total flux subtracted in 200 components = 0.00347918 Jy
! Clean residual min=-0.004702 max=0.006809 Jy/beam
! Clean residual mean=0.000001 rms=0.001462 Jy/beam
! Combined flux in latest and established models = 0.130552 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 17 components and 0.130552 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085334Jy  sigma=1.412557
! Fit after  self-cal, rms=0.085329Jy  sigma=1.412213
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7822 x 2.073 at -2.556 degrees (North through East)
! Clean map  min=-0.0042186  max=0.12027 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     HN        1.19     KP        0.90     LA        0.96     
!   MK        0.96     NL        1.09     OV        0.95     PT        0.94     
!   SC        0.97     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     HN        1.18     KP        0.96     LA        0.96     
!   MK        1.04     NL        1.00     OV        0.97     PT        0.95     
!   SC        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.085329Jy  sigma=1.412213
! Fit after  self-cal, rms=0.085883Jy  sigma=1.411052
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7829 mas, bmaj=2.074 mas, bpa=-2.534 degrees
! Estimated noise=0.267145 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000576992 Jy
! Component: 100  -  total flux cleaned = 0.000546151 Jy
! Component: 150  -  total flux cleaned = 0.000487938 Jy
! Component: 200  -  total flux cleaned = 0.000460259 Jy
! Total flux subtracted in 200 components = 0.000460259 Jy
! Clean residual min=-0.004508 max=0.006265 Jy/beam
! Clean residual mean=0.000000 rms=0.001419 Jy/beam
! Combined flux in latest and established models = 0.131013 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 25 components and 0.131013 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085851Jy  sigma=1.410743
! Fit after  self-cal, rms=0.085870Jy  sigma=1.410672
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085870Jy  sigma=1.410672
! Fit after  self-cal, rms=0.085856Jy  sigma=1.410671
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.783 mas, bmaj=2.074 mas, bpa=-2.538 degrees
! Estimated noise=0.267158 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000263171 Jy
! Component: 100  -  total flux cleaned = 0.000208147 Jy
! Component: 150  -  total flux cleaned = 0.000180966 Jy
! Component: 200  -  total flux cleaned = 0.000155081 Jy
! Total flux subtracted in 200 components = 0.000155081 Jy
! Clean residual min=-0.004465 max=0.006245 Jy/beam
! Clean residual mean=-0.000000 rms=0.001417 Jy/beam
! Combined flux in latest and established models = 0.131168 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 26 components and 0.131168 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085833Jy  sigma=1.410428
! Fit after  self-cal, rms=0.085834Jy  sigma=1.410397
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (11.6, -35).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00587207 Jy
! Component: 100  -  total flux cleaned = 0.00768461 Jy
! Component: 150  -  total flux cleaned = 0.00783655 Jy
! Component: 200  -  total flux cleaned = 0.00777869 Jy
! Total flux subtracted in 200 components = 0.00777869 Jy
! Clean residual min=-0.004198 max=0.005175 Jy/beam
! Clean residual mean=-0.000006 rms=0.001250 Jy/beam
! Combined flux in latest and established models = 0.138946 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 52 components and 0.138946 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085459Jy  sigma=1.401996
! Fit after  self-cal, rms=0.085429Jy  sigma=1.400843
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085429Jy  sigma=1.400843
! Fit after  self-cal, rms=0.085727Jy  sigma=1.399713
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7818 mas, bmaj=2.07 mas, bpa=-2.528 degrees
! Estimated noise=0.267478 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00134623 Jy
! Component: 100  -  total flux cleaned = 0.00120313 Jy
! Component: 150  -  total flux cleaned = 0.0011208 Jy
! Component: 200  -  total flux cleaned = 0.00101493 Jy
! Total flux subtracted in 200 components = 0.00101493 Jy
! Clean residual min=-0.003757 max=0.004932 Jy/beam
! Clean residual mean=-0.000006 rms=0.001171 Jy/beam
! Combined flux in latest and established models = 0.139961 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 60 components and 0.139961 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085671Jy  sigma=1.398511
! Fit after  self-cal, rms=0.085671Jy  sigma=1.398273
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000266804 Jy
! Component: 100  -  total flux cleaned = 0.000170767 Jy
! Component: 150  -  total flux cleaned = 0.000113527 Jy
! Component: 200  -  total flux cleaned = 0.000113545 Jy
! Total flux subtracted in 200 components = 0.000113545 Jy
! Clean residual min=-0.003630 max=0.004883 Jy/beam
! Clean residual mean=-0.000006 rms=0.001158 Jy/beam
! Combined flux in latest and established models = 0.140075 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 72 components and 0.140075 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085647Jy  sigma=1.397837
! Fit after  self-cal, rms=0.085650Jy  sigma=1.397808
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085650Jy  sigma=1.397808
! Fit after  self-cal, rms=0.086161Jy  sigma=1.397423
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.38 mas, bmaj=7.902 mas, bpa=4.769 degrees
! Estimated noise=0.341713 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.80137e-05 Jy
! Component: 100  -  total flux cleaned = 1.67557e-05 Jy
! Component: 150  -  total flux cleaned = 4.81895e-05 Jy
! Component: 200  -  total flux cleaned = 4.61188e-05 Jy
! Total flux subtracted in 200 components = 4.61188e-05 Jy
! Clean residual min=-0.004742 max=0.007651 Jy/beam
! Clean residual mean=-0.000014 rms=0.002025 Jy/beam
! Combined flux in latest and established models = 0.140121 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 76 components and 0.140121 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086171Jy  sigma=1.397235
! Fit after  self-cal, rms=0.086168Jy  sigma=1.397112
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.07467e-05 Jy
! Component: 100  -  total flux cleaned = -1.27054e-05 Jy
! Component: 150  -  total flux cleaned = -1.45044e-05 Jy
! Component: 200  -  total flux cleaned = -1.47435e-05 Jy
! Total flux subtracted in 200 components = -1.47435e-05 Jy
! Clean residual min=-0.004741 max=0.007519 Jy/beam
! Clean residual mean=-0.000014 rms=0.002011 Jy/beam
! Combined flux in latest and established models = 0.140106 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 77 components and 0.140106 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086181Jy  sigma=1.397257
! Fit after  self-cal, rms=0.086175Jy  sigma=1.397211
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7821 mas, bmaj=2.07 mas, bpa=-2.484 degrees
! Estimated noise=0.267808 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7821 x 2.07 at -2.484 degrees (North through East)
! Clean map  min=-0.0037179  max=0.11876 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5703 mas, bmaj=1.555 mas, bpa=-1.587 degrees
! Estimated noise=0.578502 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0955694 Jy
! Component: 100  -  total flux cleaned = 0.117013 Jy
! Component: 150  -  total flux cleaned = 0.12549 Jy
! Component: 200  -  total flux cleaned = 0.130955 Jy
! Total flux subtracted in 200 components = 0.130955 Jy
! Clean residual min=-0.005070 max=0.005810 Jy/beam
! Clean residual mean=0.000001 rms=0.001100 Jy/beam
! Combined flux in latest and established models = 0.130955 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.130955 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7821 mas, bmaj=2.07 mas, bpa=-2.484 degrees
! Estimated noise=0.267808 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (24.8, 16.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00647051 Jy
! Component: 100  -  total flux cleaned = 0.0103867 Jy
! Component: 150  -  total flux cleaned = 0.0130013 Jy
! Component: 200  -  total flux cleaned = 0.014248 Jy
! Total flux subtracted in 200 components = 0.014248 Jy
! Clean residual min=-0.004285 max=0.004430 Jy/beam
! Clean residual mean=-0.000004 rms=0.001056 Jy/beam
! Combined flux in latest and established models = 0.145203 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 44 components and 0.145203 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.38 mas, bmaj=7.902 mas, bpa=4.769 degrees
! Estimated noise=0.341713 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00105045 Jy
! Component: 100  -  total flux cleaned = 0.00145404 Jy
! Component: 150  -  total flux cleaned = 0.0017504 Jy
! Component: 200  -  total flux cleaned = 0.00213121 Jy
! Total flux subtracted in 200 components = 0.00213121 Jy
! Clean residual min=-0.005372 max=0.006281 Jy/beam
! Clean residual mean=-0.000012 rms=0.001776 Jy/beam
! Combined flux in latest and established models = 0.147334 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000234352 Jy
! Component: 100  -  total flux cleaned = 0.000269956 Jy
! Component: 150  -  total flux cleaned = 0.000302061 Jy
! Component: 200  -  total flux cleaned = 0.00030099 Jy
! Total flux subtracted in 200 components = 0.00030099 Jy
! Clean residual min=-0.005316 max=0.006268 Jy/beam
! Clean residual mean=-0.000012 rms=0.001764 Jy/beam
! Combined flux in latest and established models = 0.147635 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 59 components and 0.147635 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7821 mas, bmaj=2.07 mas, bpa=-2.484 degrees
! Estimated noise=0.267808 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000141983 Jy
! Component: 100  -  total flux cleaned = 3.30724e-05 Jy
! Component: 150  -  total flux cleaned = -1.44989e-05 Jy
! Component: 200  -  total flux cleaned = 2.82569e-05 Jy
! Total flux subtracted in 200 components = 2.82569e-05 Jy
! Clean residual min=-0.004355 max=0.004168 Jy/beam
! Clean residual mean=-0.000004 rms=0.001002 Jy/beam
! Combined flux in latest and established models = 0.147663 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 74 components and 0.147664 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086016Jy  sigma=1.392537
! Fit after  self-cal, rms=0.085937Jy  sigma=1.391172
wmodel /J1347-3750_X_map.mod
! wmodel: Unable to open new model file: /J1347-3750_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1347-3750_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7821 x 2.07 at -2.484 degrees (North through East)
! Clean map  min=-0.0034434  max=0.11697 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1347-3750_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.116974 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000969673 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.48689 2.48689 4.97377 9.94755 19.8951 39.7902 79.5804
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0029 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.116 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  120.632 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1347-3750_X_dfm.log closed on Thu May 19 22:27:20 2016