! Started logfile: /scr/pima/bg219h_uvs/J1342-2051_X_uvs.log on Thu Apr  7 12:11:19 2016
obs /scr/pima/bg219h_uvs/J1342-2051_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1342-2051_X_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.830952 visibilities/baseline/integration-bin.
! Found source: J1342-2051
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 12564 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219h_uvs/J1342-2051_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.054490Jy  sigma=23.066460
! Fit after  self-cal, rms=0.687796Jy  sigma=14.865984
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6514 mas, bmaj=1.691 mas, bpa=-2.397 degrees
! Estimated noise=0.745119 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.23519 Jy
! Component: 100  -  total flux cleaned = 0.2939 Jy
! Total flux subtracted in 100 components = 0.2939 Jy
! Clean residual min=-0.011901 max=0.024763 Jy/beam
! Clean residual mean=-0.000034 rms=0.003062 Jy/beam
! Combined flux in latest and established models = 0.2939 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.2939 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.095038Jy  sigma=1.967722
! Fit after  self-cal, rms=0.094981Jy  sigma=1.967057
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0270692 Jy
! Component: 100  -  total flux cleaned = 0.0413714 Jy
! Total flux subtracted in 100 components = 0.0413714 Jy
! Clean residual min=-0.008272 max=0.015082 Jy/beam
! Clean residual mean=-0.000022 rms=0.002058 Jy/beam
! Combined flux in latest and established models = 0.335272 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 8 components and 0.335272 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.084386Jy  sigma=1.689047
! Fit after  self-cal, rms=0.084349Jy  sigma=1.688540
! Inverting map 
! Added new window around map position (1, -0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.015102 Jy
! Component: 100  -  total flux cleaned = 0.0236355 Jy
! Total flux subtracted in 100 components = 0.0236355 Jy
! Clean residual min=-0.007481 max=0.010350 Jy/beam
! Clean residual mean=-0.000014 rms=0.001659 Jy/beam
! Combined flux in latest and established models = 0.358907 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 18 components and 0.358907 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.080403Jy  sigma=1.599916
! Fit after  self-cal, rms=0.080033Jy  sigma=1.590109
! Inverting map 
! Added new window around map position (2.4, -0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0101124 Jy
! Component: 100  -  total flux cleaned = 0.0158792 Jy
! Total flux subtracted in 100 components = 0.0158792 Jy
! Clean residual min=-0.005728 max=0.007402 Jy/beam
! Clean residual mean=-0.000008 rms=0.001371 Jy/beam
! Combined flux in latest and established models = 0.374786 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 26 components and 0.374786 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.078255Jy  sigma=1.553291
! Fit after  self-cal, rms=0.078152Jy  sigma=1.550277
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7995 mas, bmaj=1.912 mas, bpa=-2.37 degrees
! Estimated noise=0.432452 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00750244 Jy
! Component: 100  -  total flux cleaned = 0.0119714 Jy
! Component: 150  -  total flux cleaned = 0.0149029 Jy
! Component: 200  -  total flux cleaned = 0.0163089 Jy
! Total flux subtracted in 200 components = 0.0163089 Jy
! Clean residual min=-0.005476 max=0.007398 Jy/beam
! Clean residual mean=-0.000003 rms=0.001336 Jy/beam
! Combined flux in latest and established models = 0.391095 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 38 components and 0.391095 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.077334Jy  sigma=1.533167
! Fit after  self-cal, rms=0.077278Jy  sigma=1.531252
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7995 x 1.912 at -2.37 degrees (North through East)
! Clean map  min=-0.0046803  max=0.31281 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        1.08     KP        0.98     
!   LA        1.01     MK        0.98     NL        0.98     OV        1.03     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.04     KP        0.98     
!   LA        1.02     MK        1.01     NL        0.99     OV        1.04     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        1.11     KP        0.98     
!   LA        1.01     MK        0.99     NL        0.98     OV        1.02     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        1.10     KP        0.97     
!   LA        1.01     MK        1.00     NL        0.98     OV        1.01     
!   PT        0.98     SC        0.98     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00     HN        1.03     KP        0.99     
!   LA        1.02     MK        1.00     NL        0.99     OV        1.02     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.01     HN        1.08     KP        0.95     
!   LA        1.02     MK        1.00     NL        0.97     OV        1.02     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.01     HN        1.08     KP        0.98     
!   LA        1.02     MK        1.00     NL        0.98     OV        1.02     
!   PT        0.99     SC        0.98     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.077278Jy  sigma=1.531252
! Fit after  self-cal, rms=0.077429Jy  sigma=1.513677
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8009 mas, bmaj=1.908 mas, bpa=-2.158 degrees
! Estimated noise=0.43047 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4.2, 15.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00593804 Jy
! Component: 100  -  total flux cleaned = 0.0077023 Jy
! Component: 150  -  total flux cleaned = 0.00803641 Jy
! Component: 200  -  total flux cleaned = 0.00839924 Jy
! Total flux subtracted in 200 components = 0.00839924 Jy
! Clean residual min=-0.003747 max=0.004062 Jy/beam
! Clean residual mean=0.000003 rms=0.000946 Jy/beam
! Combined flux in latest and established models = 0.399495 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 60 components and 0.399495 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.076830Jy  sigma=1.504824
! Fit after  self-cal, rms=0.076813Jy  sigma=1.503755
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.076813Jy  sigma=1.503755
! Fit after  self-cal, rms=0.077593Jy  sigma=1.491603
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8003 mas, bmaj=1.905 mas, bpa=-2.313 degrees
! Estimated noise=0.430795 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000720422 Jy
! Component: 100  -  total flux cleaned = 0.000718562 Jy
! Component: 150  -  total flux cleaned = 0.000763201 Jy
! Component: 200  -  total flux cleaned = 0.000804255 Jy
! Total flux subtracted in 200 components = 0.000804255 Jy
! Clean residual min=-0.002791 max=0.003245 Jy/beam
! Clean residual mean=-0.000002 rms=0.000696 Jy/beam
! Combined flux in latest and established models = 0.400299 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 75 components and 0.400299 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.077528Jy  sigma=1.489923
! Fit after  self-cal, rms=0.077550Jy  sigma=1.489819
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4.8, -1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00210533 Jy
! Component: 100  -  total flux cleaned = 0.00245136 Jy
! Component: 150  -  total flux cleaned = 0.00249822 Jy
! Component: 200  -  total flux cleaned = 0.0024966 Jy
! Total flux subtracted in 200 components = 0.0024966 Jy
! Clean residual min=-0.002648 max=0.002717 Jy/beam
! Clean residual mean=-0.000000 rms=0.000645 Jy/beam
! Combined flux in latest and established models = 0.402796 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 91 components and 0.402796 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.077445Jy  sigma=1.487111
! Fit after  self-cal, rms=0.077439Jy  sigma=1.486947
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.077439Jy  sigma=1.486947
! Fit after  self-cal, rms=0.077475Jy  sigma=1.486665
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8004 mas, bmaj=1.906 mas, bpa=-2.361 degrees
! Estimated noise=0.430681 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000888383 Jy
! Component: 100  -  total flux cleaned = 0.000931766 Jy
! Component: 150  -  total flux cleaned = 0.000899036 Jy
! Component: 200  -  total flux cleaned = 0.000868321 Jy
! Total flux subtracted in 200 components = 0.000868321 Jy
! Clean residual min=-0.002601 max=0.002722 Jy/beam
! Clean residual mean=-0.000001 rms=0.000621 Jy/beam
! Combined flux in latest and established models = 0.403664 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 102 components and 0.403664 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.077444Jy  sigma=1.485858
! Fit after  self-cal, rms=0.077444Jy  sigma=1.485816
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (24.4, 21.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00223756 Jy
! Component: 100  -  total flux cleaned = 0.00269918 Jy
! Component: 150  -  total flux cleaned = 0.00329353 Jy
! Component: 200  -  total flux cleaned = 0.00349698 Jy
! Total flux subtracted in 200 components = 0.00349698 Jy
! Clean residual min=-0.002441 max=0.002390 Jy/beam
! Clean residual mean=0.000000 rms=0.000578 Jy/beam
! Combined flux in latest and established models = 0.407161 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 117 components and 0.407161 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.077344Jy  sigma=1.483898
! Fit after  self-cal, rms=0.077343Jy  sigma=1.483805
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.077343Jy  sigma=1.483805
! Fit after  self-cal, rms=0.077211Jy  sigma=1.483640
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.206 mas, bmaj=4.407 mas, bpa=6.677 degrees
! Estimated noise=0.571143 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00017882 Jy
! Component: 100  -  total flux cleaned = 0.000278342 Jy
! Component: 150  -  total flux cleaned = 0.000166716 Jy
! Component: 200  -  total flux cleaned = 6.54759e-05 Jy
! Total flux subtracted in 200 components = 6.54759e-05 Jy
! Clean residual min=-0.002802 max=0.002903 Jy/beam
! Clean residual mean=0.000001 rms=0.000833 Jy/beam
! Combined flux in latest and established models = 0.407226 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 126 components and 0.407226 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.077191Jy  sigma=1.483321
! Fit after  self-cal, rms=0.077190Jy  sigma=1.483284
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.20545e-05 Jy
! Component: 100  -  total flux cleaned = -8.05239e-05 Jy
! Component: 150  -  total flux cleaned = -0.000144873 Jy
! Component: 200  -  total flux cleaned = -0.000186565 Jy
! Total flux subtracted in 200 components = -0.000186565 Jy
! Clean residual min=-0.002759 max=0.002803 Jy/beam
! Clean residual mean=0.000001 rms=0.000822 Jy/beam
! Combined flux in latest and established models = 0.40704 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 133 components and 0.40704 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.077180Jy  sigma=1.483137
! Fit after  self-cal, rms=0.077180Jy  sigma=1.483127
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8003 mas, bmaj=1.906 mas, bpa=-2.391 degrees
! Estimated noise=0.430414 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8003 x 1.906 at -2.391 degrees (North through East)
! Clean map  min=-0.0022595  max=0.3108 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6522 mas, bmaj=1.683 mas, bpa=-2.447 degrees
! Estimated noise=0.745226 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.234903 Jy
! Component: 100  -  total flux cleaned = 0.294062 Jy
! Component: 150  -  total flux cleaned = 0.322969 Jy
! Component: 200  -  total flux cleaned = 0.341469 Jy
! Total flux subtracted in 200 components = 0.341469 Jy
! Clean residual min=-0.006350 max=0.010266 Jy/beam
! Clean residual mean=-0.000022 rms=0.001720 Jy/beam
! Combined flux in latest and established models = 0.341469 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.341469 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8003 mas, bmaj=1.906 mas, bpa=-2.391 degrees
! Estimated noise=0.430414 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0189618 Jy
! Component: 100  -  total flux cleaned = 0.0303247 Jy
! Component: 150  -  total flux cleaned = 0.0380082 Jy
! Component: 200  -  total flux cleaned = 0.0435738 Jy
! Total flux subtracted in 200 components = 0.0435738 Jy
! Clean residual min=-0.003505 max=0.003919 Jy/beam
! Clean residual mean=-0.000008 rms=0.000908 Jy/beam
! Combined flux in latest and established models = 0.385043 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 45 components and 0.385043 Jy
! Inverting map 
! Added new window around map position (13.2, -21.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00446019 Jy
! Component: 100  -  total flux cleaned = 0.00800099 Jy
! Component: 150  -  total flux cleaned = 0.0109867 Jy
! Component: 200  -  total flux cleaned = 0.0135157 Jy
! Total flux subtracted in 200 components = 0.0135157 Jy
! Clean residual min=-0.003154 max=0.002556 Jy/beam
! Clean residual mean=-0.000003 rms=0.000685 Jy/beam
! Combined flux in latest and established models = 0.398559 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 69 components and 0.398559 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.206 mas, bmaj=4.407 mas, bpa=6.677 degrees
! Estimated noise=0.571143 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0035353 Jy
! Component: 100  -  total flux cleaned = 0.00579298 Jy
! Component: 150  -  total flux cleaned = 0.00664962 Jy
! Component: 200  -  total flux cleaned = 0.00725539 Jy
! Total flux subtracted in 200 components = 0.00725539 Jy
! Clean residual min=-0.003174 max=0.002735 Jy/beam
! Clean residual mean=-0.000001 rms=0.000863 Jy/beam
! Combined flux in latest and established models = 0.405814 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000423698 Jy
! Component: 100  -  total flux cleaned = 0.000756655 Jy
! Component: 150  -  total flux cleaned = 0.000969437 Jy
! Component: 200  -  total flux cleaned = 0.00112571 Jy
! Total flux subtracted in 200 components = 0.00112571 Jy
! Clean residual min=-0.003043 max=0.002616 Jy/beam
! Clean residual mean=0.000001 rms=0.000819 Jy/beam
! Combined flux in latest and established models = 0.40694 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 112 components and 0.40694 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8003 mas, bmaj=1.906 mas, bpa=-2.391 degrees
! Estimated noise=0.430414 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000624824 Jy
! Component: 100  -  total flux cleaned = 0.00105081 Jy
! Component: 150  -  total flux cleaned = 0.00132342 Jy
! Component: 200  -  total flux cleaned = 0.00140334 Jy
! Total flux subtracted in 200 components = 0.00140334 Jy
! Clean residual min=-0.002706 max=0.002187 Jy/beam
! Clean residual mean=0.000001 rms=0.000571 Jy/beam
! Combined flux in latest and established models = 0.408343 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 135 components and 0.408343 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.077197Jy  sigma=1.483632
! Fit after  self-cal, rms=0.077187Jy  sigma=1.483289
wmodel /scr/pima/bg219h_uvs/J1342-2051_X_map.mod
! Writing 135 model components to file: /scr/pima/bg219h_uvs/J1342-2051_X_map.mod
wobs /scr/pima/bg219h_uvs/J1342-2051_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219h_uvs/J1342-2051_X_uvs.fits
wwins /scr/pima/bg219h_uvs/J1342-2051_X_map.win
! wwins: Wrote 7 windows to /scr/pima/bg219h_uvs/J1342-2051_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00118333 Jy
! Component: 100  -  total flux cleaned = -0.00167923 Jy
! Component: 150  -  total flux cleaned = -0.00194625 Jy
! Component: 200  -  total flux cleaned = -0.00198482 Jy
! Component: 250  -  total flux cleaned = -0.00191494 Jy
! Component: 300  -  total flux cleaned = -0.00188077 Jy
! Component: 350  -  total flux cleaned = -0.00184758 Jy
! Component: 400  -  total flux cleaned = -0.00178341 Jy
! Component: 450  -  total flux cleaned = -0.00175219 Jy
! Component: 500  -  total flux cleaned = -0.00175218 Jy
! Component: 550  -  total flux cleaned = -0.00163318 Jy
! Component: 600  -  total flux cleaned = -0.00166253 Jy
! Component: 650  -  total flux cleaned = -0.00154788 Jy
! Component: 700  -  total flux cleaned = -0.00149217 Jy
! Component: 750  -  total flux cleaned = -0.00146502 Jy
! Component: 800  -  total flux cleaned = -0.00138453 Jy
! Component: 850  -  total flux cleaned = -0.00130583 Jy
! Component: 900  -  total flux cleaned = -0.00138364 Jy
! Component: 950  -  total flux cleaned = -0.00120478 Jy
! Component: 1000  -  total flux cleaned = -0.00120491 Jy
! Component: 1050  -  total flux cleaned = -0.00113111 Jy
! Component: 1100  -  total flux cleaned = -0.000985598 Jy
! Component: 1150  -  total flux cleaned = -0.000914138 Jy
! Component: 1200  -  total flux cleaned = -0.00089094 Jy
! Component: 1250  -  total flux cleaned = -0.000705233 Jy
! Component: 1300  -  total flux cleaned = -0.000659659 Jy
! Component: 1350  -  total flux cleaned = -0.000682393 Jy
! Component: 1400  -  total flux cleaned = -0.000615454 Jy
! Component: 1450  -  total flux cleaned = -0.000593333 Jy
! Component: 1500  -  total flux cleaned = -0.000527873 Jy
! Component: 1550  -  total flux cleaned = -0.000549468 Jy
! Component: 1600  -  total flux cleaned = -0.000506735 Jy
! Component: 1650  -  total flux cleaned = -0.000506617 Jy
! Component: 1700  -  total flux cleaned = -0.000485677 Jy
! Component: 1750  -  total flux cleaned = -0.000547798 Jy
! Component: 1800  -  total flux cleaned = -0.000588471 Jy
! Component: 1850  -  total flux cleaned = -0.000447151 Jy
! Component: 1900  -  total flux cleaned = -0.00050724 Jy
! Component: 1950  -  total flux cleaned = -0.000606381 Jy
! Component: 2000  -  total flux cleaned = -0.000508031 Jy
! Component: 2050  -  total flux cleaned = -0.00058594 Jy
! Component: 2100  -  total flux cleaned = -0.000605017 Jy
! Component: 2150  -  total flux cleaned = -0.000566802 Jy
! Component: 2200  -  total flux cleaned = -0.000548122 Jy
! Component: 2250  -  total flux cleaned = -0.000529252 Jy
! Component: 2300  -  total flux cleaned = -0.000454846 Jy
! Component: 2350  -  total flux cleaned = -0.000546997 Jy
! Component: 2400  -  total flux cleaned = -0.000546748 Jy
! Component: 2450  -  total flux cleaned = -0.000601122 Jy
! Component: 2500  -  total flux cleaned = -0.000583091 Jy
! Component: 2550  -  total flux cleaned = -0.000618669 Jy
! Component: 2600  -  total flux cleaned = -0.00061873 Jy
! Component: 2650  -  total flux cleaned = -0.000671464 Jy
! Component: 2700  -  total flux cleaned = -0.000636541 Jy
! Component: 2750  -  total flux cleaned = -0.000740239 Jy
! Component: 2800  -  total flux cleaned = -0.000705813 Jy
! Component: 2850  -  total flux cleaned = -0.00077419 Jy
! Component: 2900  -  total flux cleaned = -0.000791085 Jy
! Component: 2950  -  total flux cleaned = -0.000824731 Jy
! Component: 3000  -  total flux cleaned = -0.000841434 Jy
! Component: 3050  -  total flux cleaned = -0.000940701 Jy
! Component: 3100  -  total flux cleaned = -0.000924109 Jy
! Component: 3150  -  total flux cleaned = -0.00098958 Jy
! Component: 3200  -  total flux cleaned = -0.00100581 Jy
! Component: 3250  -  total flux cleaned = -0.001022 Jy
! Component: 3300  -  total flux cleaned = -0.00105389 Jy
! Component: 3350  -  total flux cleaned = -0.00105396 Jy
! Component: 3400  -  total flux cleaned = -0.00102248 Jy
! Component: 3450  -  total flux cleaned = -0.00108517 Jy
! Component: 3500  -  total flux cleaned = -0.00103835 Jy
! Component: 3550  -  total flux cleaned = -0.00102291 Jy
! Component: 3600  -  total flux cleaned = -0.00099206 Jy
! Component: 3650  -  total flux cleaned = -0.000992077 Jy
! Component: 3700  -  total flux cleaned = -0.000900952 Jy
! Component: 3750  -  total flux cleaned = -0.000901036 Jy
! Component: 3800  -  total flux cleaned = -0.000855992 Jy
! Component: 3850  -  total flux cleaned = -0.000796314 Jy
! Component: 3900  -  total flux cleaned = -0.000766587 Jy
! Component: 3950  -  total flux cleaned = -0.000707476 Jy
! Component: 4000  -  total flux cleaned = -0.000677913 Jy
! Component: 4050  -  total flux cleaned = -0.000634072 Jy
! Total flux subtracted in 4096 components = -0.00061956 Jy
! Clean residual min=-0.000944 max=0.001179 Jy/beam
! Clean residual mean=-0.000000 rms=0.000247 Jy/beam
! Combined flux in latest and established models = 0.407723 Jy
keep
! Adding 295 model components to the UV plane model.
! The established model now contains 430 components and 0.407724 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219h_uvs/J1342-2051_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8003 x 1.906 at -2.391 degrees (North through East)
! Clean map  min=-0.0018218  max=0.31033 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1342-2051_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.31033 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000242667 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.234589 0.234589 0.469178 0.938357 1.87671 3.75343 7.50686 15.0137 30.0274 60.0548
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.31 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1278.83 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1342-2051_X_uvs.log closed on Thu Apr  7 12:11:23 2016