! Started logfile: /scr/pima/bg219h_uvs/J1342-2051_X_dfm.log on Thu May 19 22:27:02 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J1342-2051_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1342-2051_X_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.830952 visibilities/baseline/integration-bin.
! Found source: J1342-2051
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 12564 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1342-2051_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.055631Jy  sigma=22.221342
! Fit after  self-cal, rms=0.688197Jy  sigma=14.339777
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6317 mas, bmaj=1.61 mas, bpa=-2.196 degrees
! Estimated noise=0.605078 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.233906 Jy
! Component: 100  -  total flux cleaned = 0.291584 Jy
! Total flux subtracted in 100 components = 0.291584 Jy
! Clean residual min=-0.012581 max=0.024294 Jy/beam
! Clean residual mean=-0.000028 rms=0.002718 Jy/beam
! Combined flux in latest and established models = 0.291584 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.291584 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.099039Jy  sigma=1.967809
! Fit after  self-cal, rms=0.098988Jy  sigma=1.967151
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0264359 Jy
! Component: 100  -  total flux cleaned = 0.0407071 Jy
! Total flux subtracted in 100 components = 0.0407071 Jy
! Clean residual min=-0.008729 max=0.013860 Jy/beam
! Clean residual mean=-0.000016 rms=0.001820 Jy/beam
! Combined flux in latest and established models = 0.332291 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 13 components and 0.332291 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088414Jy  sigma=1.696690
! Fit after  self-cal, rms=0.088370Jy  sigma=1.696181
! Inverting map 
! Added new window around map position (1.2, -0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0143889 Jy
! Component: 100  -  total flux cleaned = 0.022963 Jy
! Total flux subtracted in 100 components = 0.022963 Jy
! Clean residual min=-0.007791 max=0.008366 Jy/beam
! Clean residual mean=-0.000009 rms=0.001496 Jy/beam
! Combined flux in latest and established models = 0.355254 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 24 components and 0.355254 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084501Jy  sigma=1.610357
! Fit after  self-cal, rms=0.084220Jy  sigma=1.603501
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7939 mas, bmaj=1.897 mas, bpa=-2.309 degrees
! Estimated noise=0.343126 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.4, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0138124 Jy
! Component: 100  -  total flux cleaned = 0.0220558 Jy
! Component: 150  -  total flux cleaned = 0.0274552 Jy
! Component: 200  -  total flux cleaned = 0.0312314 Jy
! Total flux subtracted in 200 components = 0.0312314 Jy
! Clean residual min=-0.005491 max=0.006945 Jy/beam
! Clean residual mean=-0.000003 rms=0.001333 Jy/beam
! Combined flux in latest and established models = 0.386485 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 42 components and 0.386485 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081676Jy  sigma=1.549091
! Fit after  self-cal, rms=0.081492Jy  sigma=1.543936
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7939 x 1.897 at -2.309 degrees (North through East)
! Clean map  min=-0.0046438  max=0.31402 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00     HN        1.10     KP        0.98     
!   LA        1.00     MK        0.99     NL        0.98     OV        1.03     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.06     KP        0.97     
!   LA        1.01     MK        1.01     NL        0.99     OV        1.04     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.13     KP        0.98     
!   LA        1.00     MK        0.99     NL        0.98     OV        1.02     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        1.11     KP        0.96     
!   LA        1.01     MK        1.00     NL        0.98     OV        1.01     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        1.10     KP        0.97     
!   LA        1.02     MK        0.99     NL        0.99     OV        1.01     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00     HN        1.04     KP        0.98     
!   LA        1.01     MK        1.01     NL        0.99     OV        1.01     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00     HN        1.09     KP        0.95     
!   LA        1.01     MK        1.00     NL        0.97     OV        1.02     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.00     HN        1.10     KP        0.97     
!   LA        1.01     MK        1.01     NL        0.98     OV        1.02     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.02     HN        1.08     KP        0.98     
!   LA        1.02     MK        0.98     NL        0.97     OV        1.01     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.03     HN        1.13     KP        0.98     
!   LA        1.01     MK        1.01     NL        0.97     OV        1.01     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.05     HN        1.11     KP        0.95     
!   LA        0.99     MK        1.00     NL        0.99     OV        1.00     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.99     HN        1.11     KP        0.96     
!   LA        1.00     MK        1.00     NL        1.00     OV        0.99     
!   PT        0.99     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.081492Jy  sigma=1.543936
! Fit after  self-cal, rms=0.081784Jy  sigma=1.521620
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7972 mas, bmaj=1.895 mas, bpa=-2.06 degrees
! Estimated noise=0.340906 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4.4, 15.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00568698 Jy
! Component: 100  -  total flux cleaned = 0.00848369 Jy
! Component: 150  -  total flux cleaned = 0.00923747 Jy
! Component: 200  -  total flux cleaned = 0.00956691 Jy
! Total flux subtracted in 200 components = 0.00956691 Jy
! Clean residual min=-0.003622 max=0.003665 Jy/beam
! Clean residual mean=0.000002 rms=0.000865 Jy/beam
! Combined flux in latest and established models = 0.396052 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 63 components and 0.396052 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081228Jy  sigma=1.513165
! Fit after  self-cal, rms=0.081231Jy  sigma=1.512345
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081231Jy  sigma=1.512345
! Fit after  self-cal, rms=0.082235Jy  sigma=1.500301
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7965 mas, bmaj=1.892 mas, bpa=-2.213 degrees
! Estimated noise=0.341323 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00155824 Jy
! Component: 100  -  total flux cleaned = 0.00185694 Jy
! Component: 150  -  total flux cleaned = 0.00215785 Jy
! Component: 200  -  total flux cleaned = 0.0022448 Jy
! Total flux subtracted in 200 components = 0.0022448 Jy
! Clean residual min=-0.002572 max=0.002923 Jy/beam
! Clean residual mean=-0.000003 rms=0.000637 Jy/beam
! Combined flux in latest and established models = 0.398297 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 79 components and 0.398297 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082156Jy  sigma=1.498354
! Fit after  self-cal, rms=0.082181Jy  sigma=1.498216
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4.6, -1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00198264 Jy
! Component: 100  -  total flux cleaned = 0.00227847 Jy
! Component: 150  -  total flux cleaned = 0.00237438 Jy
! Component: 200  -  total flux cleaned = 0.00241527 Jy
! Total flux subtracted in 200 components = 0.00241527 Jy
! Clean residual min=-0.002417 max=0.002483 Jy/beam
! Clean residual mean=-0.000001 rms=0.000588 Jy/beam
! Combined flux in latest and established models = 0.400712 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 97 components and 0.400712 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082093Jy  sigma=1.495833
! Fit after  self-cal, rms=0.082092Jy  sigma=1.495698
! Inverting map 
! Added new window around map position (16, 28.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00185394 Jy
! Component: 100  -  total flux cleaned = 0.00216698 Jy
! Component: 150  -  total flux cleaned = 0.00236339 Jy
! Component: 200  -  total flux cleaned = 0.0023637 Jy
! Total flux subtracted in 200 components = 0.0023637 Jy
! Clean residual min=-0.002306 max=0.002158 Jy/beam
! Clean residual mean=-0.000001 rms=0.000553 Jy/beam
! Combined flux in latest and established models = 0.403076 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 113 components and 0.403076 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082032Jy  sigma=1.494105
! Fit after  self-cal, rms=0.082031Jy  sigma=1.494043
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082031Jy  sigma=1.494043
! Fit after  self-cal, rms=0.081960Jy  sigma=1.493785
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7962 mas, bmaj=1.892 mas, bpa=-2.245 degrees
! Estimated noise=0.341035 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000428513 Jy
! Component: 100  -  total flux cleaned = 0.000462356 Jy
! Component: 150  -  total flux cleaned = 0.000398217 Jy
! Component: 200  -  total flux cleaned = 0.000398479 Jy
! Total flux subtracted in 200 components = 0.000398479 Jy
! Clean residual min=-0.002221 max=0.002169 Jy/beam
! Clean residual mean=-0.000001 rms=0.000529 Jy/beam
! Combined flux in latest and established models = 0.403474 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 121 components and 0.403474 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081937Jy  sigma=1.493132
! Fit after  self-cal, rms=0.081938Jy  sigma=1.493105
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000138144 Jy
! Component: 100  -  total flux cleaned = 5.61428e-05 Jy
! Component: 150  -  total flux cleaned = 4.80197e-06 Jy
! Component: 200  -  total flux cleaned = -6.80959e-05 Jy
! Total flux subtracted in 200 components = -6.80959e-05 Jy
! Clean residual min=-0.002240 max=0.002180 Jy/beam
! Clean residual mean=-0.000001 rms=0.000520 Jy/beam
! Combined flux in latest and established models = 0.403406 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 130 components and 0.403406 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081924Jy  sigma=1.492740
! Fit after  self-cal, rms=0.081925Jy  sigma=1.492733
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081925Jy  sigma=1.492733
! Fit after  self-cal, rms=0.081873Jy  sigma=1.492669
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.213 mas, bmaj=4.434 mas, bpa=6.646 degrees
! Estimated noise=0.450227 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000695843 Jy
! Component: 100  -  total flux cleaned = -0.000662367 Jy
! Component: 150  -  total flux cleaned = -0.000722845 Jy
! Component: 200  -  total flux cleaned = -0.000861065 Jy
! Total flux subtracted in 200 components = -0.000861065 Jy
! Clean residual min=-0.003063 max=0.002855 Jy/beam
! Clean residual mean=-0.000002 rms=0.000795 Jy/beam
! Combined flux in latest and established models = 0.402545 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 144 components and 0.402545 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081869Jy  sigma=1.492520
! Fit after  self-cal, rms=0.081869Jy  sigma=1.492502
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.74284e-05 Jy
! Component: 100  -  total flux cleaned = -0.000167261 Jy
! Component: 150  -  total flux cleaned = -0.000234304 Jy
! Component: 200  -  total flux cleaned = -0.000338658 Jy
! Total flux subtracted in 200 components = -0.000338658 Jy
! Clean residual min=-0.003053 max=0.002844 Jy/beam
! Clean residual mean=-0.000002 rms=0.000783 Jy/beam
! Combined flux in latest and established models = 0.402206 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 150 components and 0.402206 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081871Jy  sigma=1.492452
! Fit after  self-cal, rms=0.081871Jy  sigma=1.492446
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.796 mas, bmaj=1.891 mas, bpa=-2.267 degrees
! Estimated noise=0.340923 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.796 x 1.891 at -2.267 degrees (North through East)
! Clean map  min=-0.0020916  max=0.31183 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6323 mas, bmaj=1.6 mas, bpa=-2.194 degrees
! Estimated noise=0.603561 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.233006 Jy
! Component: 100  -  total flux cleaned = 0.291186 Jy
! Component: 150  -  total flux cleaned = 0.318458 Jy
! Component: 200  -  total flux cleaned = 0.336015 Jy
! Total flux subtracted in 200 components = 0.336015 Jy
! Clean residual min=-0.006060 max=0.010740 Jy/beam
! Clean residual mean=-0.000018 rms=0.001573 Jy/beam
! Combined flux in latest and established models = 0.336015 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.336015 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.796 mas, bmaj=1.891 mas, bpa=-2.267 degrees
! Estimated noise=0.340923 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.6, -0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0199715 Jy
! Component: 100  -  total flux cleaned = 0.0317825 Jy
! Component: 150  -  total flux cleaned = 0.0395862 Jy
! Component: 200  -  total flux cleaned = 0.0452842 Jy
! Total flux subtracted in 200 components = 0.0452842 Jy
! Clean residual min=-0.003251 max=0.003837 Jy/beam
! Clean residual mean=-0.000008 rms=0.000855 Jy/beam
! Combined flux in latest and established models = 0.381299 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 47 components and 0.381299 Jy
! Inverting map 
! Added new window around map position (22, -38.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00454178 Jy
! Component: 100  -  total flux cleaned = 0.00815679 Jy
! Component: 150  -  total flux cleaned = 0.0111527 Jy
! Component: 200  -  total flux cleaned = 0.0136572 Jy
! Total flux subtracted in 200 components = 0.0136572 Jy
! Clean residual min=-0.002824 max=0.002336 Jy/beam
! Clean residual mean=-0.000003 rms=0.000612 Jy/beam
! Combined flux in latest and established models = 0.394956 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 79 components and 0.394956 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.213 mas, bmaj=4.434 mas, bpa=6.646 degrees
! Estimated noise=0.450227 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00357917 Jy
! Component: 100  -  total flux cleaned = 0.00588284 Jy
! Component: 150  -  total flux cleaned = 0.00728643 Jy
! Component: 200  -  total flux cleaned = 0.00789178 Jy
! Total flux subtracted in 200 components = 0.00789178 Jy
! Clean residual min=-0.003106 max=0.002793 Jy/beam
! Clean residual mean=0.000000 rms=0.000816 Jy/beam
! Combined flux in latest and established models = 0.402848 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000196492 Jy
! Component: 100  -  total flux cleaned = 0.000331675 Jy
! Component: 150  -  total flux cleaned = 0.000414471 Jy
! Component: 200  -  total flux cleaned = 0.000490369 Jy
! Total flux subtracted in 200 components = 0.000490369 Jy
! Clean residual min=-0.002934 max=0.002732 Jy/beam
! Clean residual mean=0.000001 rms=0.000778 Jy/beam
! Combined flux in latest and established models = 0.403339 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 115 components and 0.403339 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.796 mas, bmaj=1.891 mas, bpa=-2.267 degrees
! Estimated noise=0.340923 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000161692 Jy
! Component: 100  -  total flux cleaned = 0.000245815 Jy
! Component: 150  -  total flux cleaned = 0.00028506 Jy
! Component: 200  -  total flux cleaned = 0.000248824 Jy
! Total flux subtracted in 200 components = 0.000248824 Jy
! Clean residual min=-0.002331 max=0.002206 Jy/beam
! Clean residual mean=0.000001 rms=0.000507 Jy/beam
! Combined flux in latest and established models = 0.403587 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 138 components and 0.403587 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081871Jy  sigma=1.493077
! Fit after  self-cal, rms=0.081866Jy  sigma=1.492737
wmodel /J1342-2051_X_map.mod
! wmodel: Unable to open new model file: /J1342-2051_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1342-2051_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.796 x 1.891 at -2.267 degrees (North through East)
! Clean map  min=-0.0021393  max=0.31189 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1342-2051_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.311886 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000501595 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.48248 0.48248 0.96496 1.92992 3.85984 7.71968 15.4394 30.8787 61.7574
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0015 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.311 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  621.787 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1342-2051_X_dfm.log closed on Thu May 19 22:27:05 2016