! Started logfile: /scr/pima/bg219h_uvs/J1302+5748_X_dfm.log on Thu May 19 22:26:41 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J1302+5748_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J1302+5748_X_uva.fits
! AN table 1: 7 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.803175 visibilities/baseline/integration-bin.
! Found source: J1302+5748
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 3036 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1302+5748_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.027394Jy  sigma=21.033971
! Fit after  self-cal, rms=0.761482Jy  sigma=15.369520
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6358 mas, bmaj=2.703 mas, bpa=-38.59 degrees
! Estimated noise=1.20161 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.179035 Jy
! Component: 100  -  total flux cleaned = 0.245742 Jy
! Total flux subtracted in 100 components = 0.245742 Jy
! Clean residual min=-0.025170 max=0.041733 Jy/beam
! Clean residual mean=-0.000014 rms=0.005674 Jy/beam
! Combined flux in latest and established models = 0.245742 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.245742 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.119657Jy  sigma=2.358587
! Fit after  self-cal, rms=0.119116Jy  sigma=2.349054
! Inverting map 
! Added new window around map position (-13.4, 27.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.038264 Jy
! Component: 100  -  total flux cleaned = 0.056204 Jy
! Total flux subtracted in 100 components = 0.056204 Jy
! Clean residual min=-0.018037 max=0.025823 Jy/beam
! Clean residual mean=-0.000006 rms=0.003748 Jy/beam
! Combined flux in latest and established models = 0.301946 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 21 components and 0.301946 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.105100Jy  sigma=2.003415
! Fit after  self-cal, rms=0.104300Jy  sigma=1.986544
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8005 mas, bmaj=2.809 mas, bpa=-38.02 degrees
! Estimated noise=0.730472 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (13.2, -27.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0178807 Jy
! Component: 100  -  total flux cleaned = 0.0218616 Jy
! Component: 150  -  total flux cleaned = 0.0218584 Jy
! Component: 200  -  total flux cleaned = 0.0221722 Jy
! Total flux subtracted in 200 components = 0.0221722 Jy
! Clean residual min=-0.009090 max=0.010660 Jy/beam
! Clean residual mean=-0.000009 rms=0.001911 Jy/beam
! Combined flux in latest and established models = 0.324118 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 44 components and 0.324118 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.099485Jy  sigma=1.877507
! Fit after  self-cal, rms=0.099419Jy  sigma=1.876906
! Inverting map 
! Added new window around map position (-8.2, 3.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00300145 Jy
! Component: 100  -  total flux cleaned = 0.00392849 Jy
! Component: 150  -  total flux cleaned = 0.00586419 Jy
! Component: 200  -  total flux cleaned = 0.00719163 Jy
! Total flux subtracted in 200 components = 0.00719163 Jy
! Clean residual min=-0.007366 max=0.006460 Jy/beam
! Clean residual mean=-0.000007 rms=0.001440 Jy/beam
! Combined flux in latest and established models = 0.33131 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 64 components and 0.33131 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.097984Jy  sigma=1.853257
! Fit after  self-cal, rms=0.097917Jy  sigma=1.852437
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8005 x 2.809 at -38.02 degrees (North through East)
! Clean map  min=-0.010041  max=0.23433 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        1.19     KP        0.99     
!   LA        0.97     MK        1.04     NL        1.00     OV        1.00     
!   PT        0.98     SC        0.93     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.09     KP        0.95     
!   LA        0.96     MK        1.09     NL        0.99     OV        0.97     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        1.04     KP        0.98     
!   LA        1.00     MK        1.10     NL        1.04     OV        0.98     
!   PT        1.00     SC        0.92     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.05     HN        1.02     KP        1.00     
!   LA        0.99     MK        1.10     NL        0.97     OV        1.01     
!   PT        0.95     SC        0.94     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.00     KP        1.02     
!   LA        1.07     MK        0.99     NL        1.00     OV        1.00     
!   PT        0.89     SC        0.93     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        1.02     KP        1.01     
!   LA        1.03     MK        1.01     NL        0.99     OV        1.00     
!   PT        1.00     SC        0.89     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.98     KP        0.98     
!   LA        1.01     MK        0.86     NL        0.99     OV        0.99     
!   PT        1.00     SC        0.96     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.93     KP        1.01     
!   LA        1.02     MK        0.90     NL        1.01     OV        0.99     
!   PT        0.99     SC        0.91     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.01     KP        0.96     
!   LA        1.00     MK        1.02     NL        0.96     OV        0.97     
!   PT        0.98     SC        0.93     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.96     HN        0.88     KP        0.95     
!   LA        0.98     MK        1.00     NL        1.01     OV        1.01     
!   PT        0.97     SC        0.97     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.98     HN        0.90     KP        0.97     
!   LA        1.01     MK        0.99     NL        1.01     OV        0.99     
!   PT        0.98     SC        0.92     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.98     HN        0.89     KP        0.98     
!   LA        0.98     MK        1.08     NL        1.01     OV        1.01     
!   PT        0.93     SC        0.85     
! 
! 
! Fit before self-cal, rms=0.097917Jy  sigma=1.852437
! Fit after  self-cal, rms=0.095274Jy  sigma=1.827928
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7998 mas, bmaj=2.804 mas, bpa=-37.89 degrees
! Estimated noise=0.71381 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000709986 Jy
! Component: 100  -  total flux cleaned = -0.000579475 Jy
! Component: 150  -  total flux cleaned = -0.000225537 Jy
! Component: 200  -  total flux cleaned = -0.000342119 Jy
! Total flux subtracted in 200 components = -0.000342119 Jy
! Clean residual min=-0.004587 max=0.004130 Jy/beam
! Clean residual mean=-0.000004 rms=0.001045 Jy/beam
! Combined flux in latest and established models = 0.330968 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 87 components and 0.330968 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.094792Jy  sigma=1.823300
! Fit after  self-cal, rms=0.094769Jy  sigma=1.822991
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.094769Jy  sigma=1.822991
! Fit after  self-cal, rms=0.093736Jy  sigma=1.821931
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7989 mas, bmaj=2.803 mas, bpa=-37.88 degrees
! Estimated noise=0.705702 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00322243 Jy
! Component: 100  -  total flux cleaned = -0.0033385 Jy
! Component: 150  -  total flux cleaned = -0.00335266 Jy
! Component: 200  -  total flux cleaned = -0.00335698 Jy
! Total flux subtracted in 200 components = -0.00335698 Jy
! Clean residual min=-0.004245 max=0.003978 Jy/beam
! Clean residual mean=-0.000004 rms=0.000976 Jy/beam
! Combined flux in latest and established models = 0.327611 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 101 components and 0.327611 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.093384Jy  sigma=1.820086
! Fit after  self-cal, rms=0.093376Jy  sigma=1.819971
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000380849 Jy
! Component: 100  -  total flux cleaned = -1.77246e-06 Jy
! Component: 150  -  total flux cleaned = 0.000286927 Jy
! Component: 200  -  total flux cleaned = 0.000626944 Jy
! Total flux subtracted in 200 components = 0.000626944 Jy
! Clean residual min=-0.003958 max=0.003763 Jy/beam
! Clean residual mean=-0.000004 rms=0.000922 Jy/beam
! Combined flux in latest and established models = 0.328238 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 112 components and 0.328238 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.093237Jy  sigma=1.818627
! Fit after  self-cal, rms=0.093233Jy  sigma=1.818574
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.093233Jy  sigma=1.818574
! Fit after  self-cal, rms=0.091841Jy  sigma=1.816907
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7968 mas, bmaj=2.804 mas, bpa=-37.87 degrees
! Estimated noise=0.69486 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00327553 Jy
! Component: 100  -  total flux cleaned = -0.00431599 Jy
! Component: 150  -  total flux cleaned = -0.00425117 Jy
! Component: 200  -  total flux cleaned = -0.00406279 Jy
! Total flux subtracted in 200 components = -0.00406279 Jy
! Clean residual min=-0.003722 max=0.003656 Jy/beam
! Clean residual mean=-0.000003 rms=0.000891 Jy/beam
! Combined flux in latest and established models = 0.324175 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 123 components and 0.324175 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091544Jy  sigma=1.816878
! Fit after  self-cal, rms=0.091541Jy  sigma=1.816829
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.04266e-05 Jy
! Component: 100  -  total flux cleaned = 0.000198166 Jy
! Component: 150  -  total flux cleaned = 0.000421053 Jy
! Component: 200  -  total flux cleaned = 0.000633537 Jy
! Total flux subtracted in 200 components = 0.000633537 Jy
! Clean residual min=-0.003500 max=0.003526 Jy/beam
! Clean residual mean=-0.000003 rms=0.000859 Jy/beam
! Combined flux in latest and established models = 0.324809 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 129 components and 0.324808 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091450Jy  sigma=1.816210
! Fit after  self-cal, rms=0.091448Jy  sigma=1.816178
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091448Jy  sigma=1.816178
! Fit after  self-cal, rms=0.089952Jy  sigma=1.814395
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.038 mas, bmaj=3.007 mas, bpa=-40.74 degrees
! Estimated noise=0.87121 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00290653 Jy
! Component: 100  -  total flux cleaned = -0.00324056 Jy
! Component: 150  -  total flux cleaned = -0.00287994 Jy
! Component: 200  -  total flux cleaned = -0.00256965 Jy
! Total flux subtracted in 200 components = -0.00256965 Jy
! Clean residual min=-0.003683 max=0.003325 Jy/beam
! Clean residual mean=-0.000006 rms=0.000927 Jy/beam
! Combined flux in latest and established models = 0.322239 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 150 components and 0.322239 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.089816Jy  sigma=1.813988
! Fit after  self-cal, rms=0.089817Jy  sigma=1.813926
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.57225e-05 Jy
! Component: 100  -  total flux cleaned = 1.64392e-05 Jy
! Component: 150  -  total flux cleaned = -0.000170291 Jy
! Component: 200  -  total flux cleaned = -0.000348048 Jy
! Total flux subtracted in 200 components = -0.000348048 Jy
! Clean residual min=-0.003429 max=0.003203 Jy/beam
! Clean residual mean=-0.000006 rms=0.000879 Jy/beam
! Combined flux in latest and established models = 0.321891 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 170 components and 0.321891 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.089776Jy  sigma=1.814153
! Fit after  self-cal, rms=0.089776Jy  sigma=1.814121
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7938 mas, bmaj=2.805 mas, bpa=-37.84 degrees
! Estimated noise=0.683278 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7938 x 2.805 at -37.84 degrees (North through East)
! Clean map  min=-0.0084143  max=0.22714 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6314 mas, bmaj=2.701 mas, bpa=-38.44 degrees
! Estimated noise=1.11799 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.167528 Jy
! Component: 100  -  total flux cleaned = 0.233751 Jy
! Component: 150  -  total flux cleaned = 0.269069 Jy
! Component: 200  -  total flux cleaned = 0.290409 Jy
! Total flux subtracted in 200 components = 0.290409 Jy
! Clean residual min=-0.011876 max=0.014262 Jy/beam
! Clean residual mean=-0.000008 rms=0.002744 Jy/beam
! Combined flux in latest and established models = 0.290409 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.290409 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7938 mas, bmaj=2.805 mas, bpa=-37.84 degrees
! Estimated noise=0.683278 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0175314 Jy
! Component: 100  -  total flux cleaned = 0.022729 Jy
! Component: 150  -  total flux cleaned = 0.0226934 Jy
! Component: 200  -  total flux cleaned = 0.0226702 Jy
! Total flux subtracted in 200 components = 0.0226702 Jy
! Clean residual min=-0.007723 max=0.005955 Jy/beam
! Clean residual mean=-0.000010 rms=0.001512 Jy/beam
! Combined flux in latest and established models = 0.313079 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 44 components and 0.313079 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.038 mas, bmaj=3.007 mas, bpa=-40.74 degrees
! Estimated noise=0.87121 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00428755 Jy
! Component: 100  -  total flux cleaned = 0.00565938 Jy
! Component: 150  -  total flux cleaned = 0.00665819 Jy
! Component: 200  -  total flux cleaned = 0.00765309 Jy
! Total flux subtracted in 200 components = 0.00765309 Jy
! Clean residual min=-0.006274 max=0.005120 Jy/beam
! Clean residual mean=-0.000016 rms=0.001598 Jy/beam
! Combined flux in latest and established models = 0.320732 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000110204 Jy
! Component: 100  -  total flux cleaned = 0.00052642 Jy
! Component: 150  -  total flux cleaned = 0.000817826 Jy
! Component: 200  -  total flux cleaned = 0.00109014 Jy
! Total flux subtracted in 200 components = 0.00109014 Jy
! Clean residual min=-0.005852 max=0.004543 Jy/beam
! Clean residual mean=-0.000014 rms=0.001438 Jy/beam
! Combined flux in latest and established models = 0.321822 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 75 components and 0.321822 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7938 mas, bmaj=2.805 mas, bpa=-37.84 degrees
! Estimated noise=0.683278 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000176954 Jy
! Component: 100  -  total flux cleaned = 0.000498261 Jy
! Component: 150  -  total flux cleaned = 0.00108523 Jy
! Component: 200  -  total flux cleaned = 0.00162364 Jy
! Total flux subtracted in 200 components = 0.00162364 Jy
! Clean residual min=-0.005121 max=0.004363 Jy/beam
! Clean residual mean=-0.000006 rms=0.001099 Jy/beam
! Combined flux in latest and established models = 0.323446 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 93 components and 0.323446 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090518Jy  sigma=1.832086
! Fit after  self-cal, rms=0.090460Jy  sigma=1.831555
wmodel /J1302+5748_X_map.mod
! wmodel: Unable to open new model file: /J1302+5748_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J1302+5748_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7938 x 2.805 at -37.84 degrees (North through East)
! Clean map  min=-0.0073915  max=0.21758 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J1302+5748_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.217582 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00108189 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.4917 1.4917 2.9834 5.96681 11.9336 23.8672 47.7345 95.4689
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0032 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.217 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  201.112 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J1302+5748_X_dfm.log closed on Thu May 19 22:26:43 2016